Tools Browser tools
   HOME

TheInfoList



OR:

A tool is an object that can extend an individual's ability to modify features of the surrounding environment or help them accomplish a particular task. Although many animals use simple tools, only human beings, whose use of
stone tool A stone tool is, in the most general sense, any tool made either partially or entirely out of stone. Although stone tool-dependent societies and cultures still exist today, most stone tools are associated with prehistoric (particularly Stone Ag ...
s dates back hundreds of millennia, have been observed using tools to make other tools. Early human tools, made of such materials as stone, bone, and wood, were used for preparation of
food Food is any substance consumed by an organism for nutritional support. Food is usually of plant, animal, or fungal origin, and contains essential nutrients, such as carbohydrates, fats, proteins, vitamins, or minerals. The substance is inge ...
,
hunting Hunting is the human activity, human practice of seeking, pursuing, capturing, or killing wildlife or feral animals. The most common reasons for humans to hunt are to harvest food (i.e. meat) and useful animal products (fur/hide (skin), hide, ...
, manufacture of weapons, and working of materials to produce clothing and useful artifacts. The development of metalworking made additional types of tools possible. Harnessing energy sources, such as
animal power A working animal is an animal, usually domesticated, that is kept by humans and trained to perform tasks instead of being slaughtered to harvest animal products. Some are used for their physical strength (e.g. oxen and draft horses) or for tr ...
, wind, or
steam Steam is a substance containing water in the gas phase, and sometimes also an aerosol of liquid water droplets, or air. This may occur due to evaporation or due to boiling, where heat is applied until water reaches the enthalpy of vaporization ...
, allowed increasingly complex tools to produce an even larger range of items, with the Industrial Revolution marking an inflection point in the use of tools. The introduction of widespread automation in the 19th and 20th centuries allowed tools to operate with minimal human supervision, further increasing the productivity of human labor.


Definition

While a common-sense understanding of the meaning of tool is widespread, several formal definitions have been proposed. In 1981, Benjamin Beck published a widely used definition of tool use. This has been modified to:Other, briefer definitions have been proposed:


History

Anthropologists believe that the use of tools was an important step in the evolution of mankind. Because tools are used extensively by both humans and wild
chimpanzee The chimpanzee (''Pan troglodytes''), also known as simply the chimp, is a species of great ape native to the forest and savannah of tropical Africa. It has four confirmed subspecies and a fifth proposed subspecies. When its close relative th ...
s, it is widely assumed that the first routine use of tools took place prior to the divergence between the two species. These early tools, however, were likely made of perishable materials such as sticks, or consisted of unmodified stones that cannot be distinguished from other stones as tools. Stone artifacts date back to about 2.5 million years ago. Also (paperback) However, a 2010 study suggests the hominin species '' Australopithecus afarensis'' ate meat by carving animal carcasses with stone implements. This finding pushes back the earliest known use of stone tools among hominins to about 3.4 million years ago. Finds of actual tools date back at least 2.6 million years in Ethiopia. One of the earliest distinguishable stone tool forms is the hand axe. Up until recently, weapons found in digs were the only tools of "early man" that were studied and given importance. Now, more tools are recognized as culturally and historically relevant. As well as hunting, other activities required tools such as preparing food, "...nutting, leatherworking, grain harvesting and woodworking..." Included in this group are "flake stone tools". Tools are the most important items that the ancient humans used to climb to the top of the food chain; by inventing tools, they were able to accomplish tasks that human bodies could not, such as using a spear or bow to kill prey, since their teeth were not sharp enough to pierce many animals' skins. “Man the hunter” as the catalyst for Hominin change has been questioned. Based on marks on the bones at archaeological sites, it is now more evident that pre-humans were scavenging off of other predators' carcasses rather than killing their own food.


Timeline of ancient tool development

Many tools were made in prehistory or in the early centuries of recorded history, but archaeological evidence can provide dates of development and use. * Olduvai stone technology ( Oldowan) 2.5 million years ago (scrapers; to butcher dead animals) * Huts, 2 million years ago. * Acheulean stone technology 1.6 million years ago (hand axe) * Fire creation and manipulation, used since the
Paleolithic The Paleolithic or Palaeolithic (), also called the Old Stone Age (from Greek: παλαιός ''palaios'', "old" and λίθος ''lithos'', "stone"), is a period in human prehistory that is distinguished by the original development of stone too ...
, possibly by
Homo erectus ''Homo erectus'' (; meaning "upright man") is an extinct species of archaic human from the Pleistocene, with its earliest occurrence about 2 million years ago. Several human species, such as '' H. heidelbergensis'' and '' H. antecessor' ...
as early as 1.5 Million years ago * Boats, 900,000 years ago. *
Cooking Cooking, cookery, or culinary arts is the art, science and craft of using heat to Outline of food preparation, prepare food for consumption. Cooking techniques and ingredients vary widely, from grilling food over an open fire to using electric ...
, 500,000 years ago. *
Javelin A javelin is a light spear designed primarily to be thrown, historically as a ranged weapon, but today predominantly for sport. The javelin is almost always thrown by hand, unlike the sling, bow, and crossbow, which launch projectiles with th ...
s, 400,000 years ago. *
Glue Adhesive, also known as glue, cement, mucilage, or paste, is any non-metallic substance applied to one or both surfaces of two separate items that binds them together and resists their separation. The use of adhesives offers certain advant ...
, 200,000 years ago. * Clothing possibly 170,000 years ago. *
Stone tool A stone tool is, in the most general sense, any tool made either partially or entirely out of stone. Although stone tool-dependent societies and cultures still exist today, most stone tools are associated with prehistoric (particularly Stone Ag ...
s, used by Homo floresiensis, possibly 100,000 years ago. * Harpoons, 90,000 years ago. *
Bow and arrow The bow and arrow is a ranged weapon system consisting of an elastic launching device (bow) and long-shafted projectiles ( arrows). Humans used bows and arrows for hunting and aggression long before recorded history, and the practice was comm ...
s, 70,000–60,000 years ago. * Sewing needles, 60,000 - 50,000 BC *
Flute The flute is a family of classical music instrument in the woodwind group. Like all woodwinds, flutes are aerophones, meaning they make sound by vibrating a column of air. However, unlike woodwind instruments with reeds, a flute is a reedless ...
s, 43,000 years ago. * Fishing nets, 43,000 years ago. * Ropes, 40,000 years ago. * Ceramics c. 25,000 BC * Fishing hooks, C. 23,000 years ago. * Domestication of animals, c. 15,000 BC * Sling (weapon) c. 9th millennium BC * Microliths c. 9th millennium BC *
Brick A brick is a type of block used to build walls, pavements and other elements in masonry construction. Properly, the term ''brick'' denotes a block composed of dried clay, but is now also used informally to denote other chemically cured cons ...
used for construction in the Middle East c. 6000 BC * Agriculture and
Plough A plough or plow ( US; both ) is a farm tool for loosening or turning the soil before sowing seed or planting. Ploughs were traditionally drawn by oxen and horses, but in modern farms are drawn by tractors. A plough may have a wooden, iron or ...
c. 4000 BC *
Wheel A wheel is a circular component that is intended to rotate on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machines. Wheels, in conjunction wi ...
c. 4000 BC *
Gnomon A gnomon (; ) is the part of a sundial that casts a shadow. The term is used for a variety of purposes in mathematics and other fields. History A painted stick dating from 2300 BC that was excavated at the astronomical site of Taosi is the ol ...
c. 4000 BC * Writing systems c. 3500 BC * Copper c. 3200 BC *
Bronze Bronze is an alloy consisting primarily of copper, commonly with about 12–12.5% tin and often with the addition of other metals (including aluminium, manganese, nickel, or zinc) and sometimes non-metals, such as phosphorus, or metalloids such ...
c. 2500 BC * Salt c. 2500 BC *
Chariot A chariot is a type of cart driven by a charioteer, usually using horses to provide rapid motive power. The oldest known chariots have been found in burials of the Sintashta culture in modern-day Chelyabinsk Oblast, Russia, dated to c. 2000&nbs ...
c. 2000 BC * Iron c. 1500 BC *
Sundial A sundial is a horological device that tells the time of day (referred to as civil time in modern usage) when direct sunlight shines by the apparent position of the Sun in the sky. In the narrowest sense of the word, it consists of a flat ...
c. 800 BC * Glass ca. 500 BC *
Catapult A catapult is a ballistic device used to launch a projectile a great distance without the aid of gunpowder or other propellants – particularly various types of ancient and medieval siege engines. A catapult uses the sudden release of stored p ...
c. 400 BC * Cast iron c. 400 BC *
Horseshoe A horseshoe is a fabricated product designed to protect a horse hoof from wear. Shoes are attached on the palmar surface (ground side) of the hooves, usually nailed through the insensitive hoof wall that is anatomically akin to the human toen ...
c. 300 BC *
Stirrup A stirrup is a light frame or ring that holds the foot of a rider, attached to the saddle by a strap, often called a ''stirrup leather''. Stirrups are usually paired and are used to aid in mounting and as a support while using a riding animal ( ...
first few centuries AD Several of the six classic
simple machines A simple machine is a mechanical device that changes the direction or magnitude of a force. In general, they can be defined as the simplest mechanisms that use mechanical advantage (also called leverage) to multiply force. Usually the term refer ...
( wheel and axle, lever,
pulley A pulley is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable or belt, or transfer of power between the shaft and cable or belt. In the case of a pulley supported by a frame or shell that ...
, inclined plane, wedge, and screw) were invented in Mesopotamia. The wheel and axle mechanism first appeared with the potter's wheel, invented in what is now Iraq during the 5th millennium BC. This led to the invention of the wheeled vehicle in Mesopotamia during the early 4th millennium BC. The lever was used in the shadoof water-lifting device, the first crane machine, which appeared in Mesopotamia circa 3000 BC. and then in ancient Egyptian technology circa 2000 BC. The earliest evidence of pulleys date back to Mesopotamia in the early 2nd millennium BC. The screw, the last of the simple machines to be invented, first appeared in Mesopotamia during the Neo-Assyrian period (911-609) BC. The Assyrian King Sennacherib (704–681 BC) claims to have invented automatic sluices and to have been the first to use water screw pumps, of up to 30 tons weight, which were cast using two-part clay molds rather than by the ' lost wax' process.S Dalley, ''The Mystery of the Hanging Gardens of Babylon'', Oxford University Press(2013) The Jerwan Aqueduct (c. 688 BC) is made with stone arches and lined with waterproof concrete. The earliest evidence of water wheels and watermills date back to the ancient Near East in the 4th century BC, specifically in the
Persian Empire The Achaemenid Empire or Achaemenian Empire (; peo, wikt:𐎧𐏁𐏂𐎶, 𐎧𐏁𐏂, , ), also called the First Persian Empire, was an History of Iran#Classical antiquity, ancient Iranian empire founded by Cyrus the Great in 550 BC. Bas ...
before 350 BC, in the regions of Mesopotamia (Iraq) and Persia (Iran). This pioneering use of water power constituted the first human-devised motive force not to rely on muscle power (besides the
sail A sail is a tensile structure—which is made from fabric or other membrane materials—that uses wind power to propel sailing craft, including sailing ships, sailboats, windsurfers, ice boats, and even sail-powered land vehicles. Sails may ...
).
Mechanical Mechanical may refer to: Machine * Machine (mechanical), a system of mechanisms that shape the actuator input to achieve a specific application of output forces and movement * Mechanical calculator, a device used to perform the basic operations of ...
devices experienced a major expansion in their use in Ancient Greece and Ancient Rome with the systematic employment of new energy sources, especially
waterwheel A water wheel is a machine for converting the energy of flowing or falling water into useful forms of power, often in a watermill. A water wheel consists of a wheel (usually constructed from wood or metal), with a number of blades or buckets ...
s. Their use expanded through the Dark Ages with the addition of windmills.


Machine tools

Machine tools occasioned a surge in producing new tools in the Industrial Revolution. Pre-industrial machinery was built by various craftsmen
millwrights A millwright is a craftsperson or skilled tradesperson who installs, dismantles, maintains, repairs, reassembles, and moves machinery in factories, power plants, and construction sites. The term ''millwright'' (also known as ''industrial mecha ...
built water and windmills, carpenters made wooden framing, and smiths and turners made metal parts. Wooden components had the disadvantage of changing dimensions with temperature and humidity, and the various joints tended to rack (work loose) over time. As the Industrial Revolution progressed, machines with metal parts and frames became more common. Other important uses of metal parts were in firearms and threaded fasteners, such as machine screws, bolts, and nuts. There was also the need for precision in making parts. Precision would allow better working machinery, interchangeability of parts, and standardization of threaded fasteners. The demand for metal parts led to the development of several
machine tools A machine tool is a machine for handling or machining metal or other rigid materials, usually by cutting, boring, grinding, shearing, or other forms of deformations. Machine tools employ some sort of tool that does the cutting or shaping. All m ...
. They have their origins in the tools developed in the 18th century by makers of clocks and watches and scientific instrument makers to enable them to batch-produce small mechanisms. Before the advent of machine tools, metal was worked manually using the basic hand tools of hammers, files, scrapers, saws, and chisels. Consequently, the use of metal machine parts was kept to a minimum. Hand methods of production were very laborious and costly and precision was difficult to achieve.. Reprinted by McGraw-Hill, New York and London, 1926 (); and by Lindsay Publications, Inc., Bradley, Illinois, (). With their inherent precision, machine tools enabled the economical production of
interchangeable parts Interchangeable parts are parts ( components) that are identical for practical purposes. They are made to specifications that ensure that they are so nearly identical that they will fit into any assembly of the same type. One such part can freely r ...
. Examples of machine tools include: * Broaching machine * Drill press * Gear shaper * Hobbing machine * Hone *
Lathe A lathe () is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling, drilling, deformation, facing, and turning, with tools that are applied to the workpiece to c ...
* Screw machines * Milling machine * Shear (sheet metal) * Shaper * Bandsaw * Planer *
Stewart platform A Stewart platform is a type of parallel manipulator that has six prismatic actuators, commonly hydraulic jacks or electric linear actuators, attached in pairs to three positions on the platform's baseplate, crossing over to three mounting po ...
mills *
Grinding machines Grind is the cross-sectional shape of a blade. Grind, grinds, or grinding may also refer to: Grinding action * Grinding (abrasive cutting), a method of crafting * Grinding (dance), suggestive club dancing * Grinding (video gaming), repetitive and ...
Advocates of
nanotechnology Nanotechnology, also shortened to nanotech, is the use of matter on an atomic, molecular, and supramolecular scale for industrial purposes. The earliest, widespread description of nanotechnology referred to the particular technological goal o ...
expect a similar surge as tools become microscopic in size.


Types

One can classify tools according to their basic functions: * Cutting and edge tools, such as the knife, sickle, scythe, hatchet, and axe, are wedge-shaped implements that produce a shearing force along a narrow face. Ideally, the edge of the tool needs to be harder than the material being cut or the blade will become dulled with repeated use. But even resilient tools will require periodic sharpening, which is the process of removing deformation wear from the edge. Other examples of cutting tools include gouges and drill bits. * Moving tools move large and tiny items. Many are levers which give the user a mechanical advantage. Examples of force-concentrating tools include the
hammer A hammer is a tool, most often a hand tool, consisting of a weighted "head" fixed to a long handle that is swung to deliver an impact to a small area of an object. This can be, for example, to drive nails into wood, to shape metal (as w ...
which moves a nail or the maul which moves a stake. These operate by applying
physical compression In mechanics, compression is the application of balanced inward ("pushing") forces to different points on a material or structure, that is, forces with no net sum or torque directed so as to reduce its size in one or more directions.Ferdinand P ...
to a surface. In the case of the screwdriver, the force is rotational and called torque. By contrast, an
anvil An anvil is a metalworking tool consisting of a large block of metal (usually forged or cast steel), with a flattened top surface, upon which another object is struck (or "worked"). Anvils are as massive as practical, because the higher th ...
concentrates force on an object being hammered by ''preventing'' it from moving away when struck. Writing implements deliver a fluid to a surface via compression to activate the ink cartridge. Grabbing and twisting nuts and bolts with pliers, a glove, a wrench, etc. likewise move items by applying torque (rotational force). * Tools that enact chemical changes, including temperature and ignition, such as lighters and blowtorches. * Guiding, measuring and perception tools include the ruler, glasses, square,
sensor A sensor is a device that produces an output signal for the purpose of sensing a physical phenomenon. In the broadest definition, a sensor is a device, module, machine, or subsystem that detects events or changes in its environment and sends ...
s,
straightedge A straightedge or straight edge is a tool used for drawing straight lines, or checking their straightness. If it has equally spaced markings along its length, it is usually called a ruler. Straightedges are used in the automotive service and ma ...
, theodolite, microscope, monitor, clock,
phone A telephone is a telecommunications device that permits two or more users to conduct a conversation when they are too far apart to be easily heard directly. A telephone converts sound, typically and most efficiently the human voice, into ele ...
, printer * Shaping tools, such as molds, jigs, trowels. * Fastening tools, such as
welder In a broad sense, a welder is anyone, amateur or professional, who uses welding equipment, perhaps especially one who uses such equipment fairly often. In a narrower sense, a welder is a tradesperson who specializes in fusing materials together ...
s, soldering irons, rivet guns, nail guns, or glue guns. * Information and data manipulation tools, such as
computers A computer is a machine that can be programmed to carry out sequences of arithmetic or logical operations (computation) automatically. Modern digital electronic computers can perform generic sets of operations known as programs. These programs ...
, IDE, spreadsheets Some tools may be combinations of other tools. An alarm-clock is for example a combination of a measuring tool (the clock) and a perception tool (the alarm). This enables the alarm-clock to be a tool that falls outside of all the categories mentioned above. There is some debate on whether to consider protective gear items as tools, because they do not directly help perform work, just protect the worker like ordinary clothing. They do meet the general definition of tools and in many cases are necessary for the completion of the work. Personal protective equipment includes such items as gloves, safety glasses, ear defenders and biohazard suits.


Function


Tool substitution

Often, by design or coincidence, a tool may share key functional attributes with one or more other tools. In this case, some tools can substitute for other tools, either as a makeshift solution or as a matter of practical efficiency. "One tool does it all" is a motto of some importance for workers who cannot practically carry every specialized tool to the location of every work task, such as a carpenter who does not necessarily work in a shop all day and needs to do jobs in a customer's house. Tool substitution may be divided broadly into two classes: substitution "by-design", or "multi-purpose", and substitution as makeshift. Substitution "by-design" would be tools that are designed specifically to accomplish multiple tasks using only that one tool. Substitution is "makeshift" when human ingenuity comes into play and a tool is used for an unintended purpose such as using a long screw driver to separate a cars control arm from a ball joint instead of using a tuning fork. In many cases, the designed secondary functions of tools are not widely known. For example, many wood-cutting
hand saws In woodworking and carpentry, hand saws, also known as "panel saws", are used to cut pieces of wood into different shapes. This is usually done in order to join the pieces together and carve a wooden object. They usually operate by having a se ...
integrate a square by incorporating a specially shaped handle that allows 90° and 45° angles to be marked by aligning the appropriate part of the handle with an edge and scribing along the back edge of the saw. The latter is illustrated by the saying "All tools can be used as hammers." Nearly all tools can be used to function as a hammer, even though very few tools are intentionally designed for it and even fewer work as well as the original. Tools are also often used to substitute for many mechanical apparatuses, especially in older mechanical devices. In many cases a cheap tool could be used to occupy the place of a missing mechanical part. A window roller in a car could easily be replaced with a pair of vise-grips or regular pliers. A transmission shifter or ignition switch would be able to be replaced with a screwdriver. Again, these would be considered tools that are being used for their unintended purposes, substitution as makeshift. Tools such as a
rotary tool Die grinders and rotary tools are handheld power tools used for grinding, sanding, honing, polishing, or machining material (typically metal, but also plastic or wood). All such tools are conceptually similar, with no bright dividing line betwe ...
would be considered the substitution "by-design", or "multi-purpose". This class of tools allows the use of one tool that has at least two different capabilities. "Multi-purpose" tools are basically multiple tools in one device/tool. Tools such as this are often power tools that come with many different attachments like a rotary tool does, so you could say that a power drill is a "multi-purpose" tool because you can do more than just one thing with a power drill.


Multi-use tools

A multi-tool is a hand tool that incorporates several tools into a single, portable device; the Swiss army knife represents one of the earliest examples. Other tools have a primary purpose but also incorporate other functionality – for example, lineman's pliers incorporate a gripper and cutter and are often used as a hammer; and some hand saws incorporate a square in the right-angle between the blade's dull edge and the saw's handle. This would also be the category of "multi-purpose" tools, since they are also multiple tools in one (multi-use and multi-purpose can be used interchangeably – compare hand axe). These types of tools were specifically made to catch the eye of many different craftsman who traveled to do their work. To these workers these types of tools were revolutionary because they were one tool or one device that could do several different things. With this new revolution of tools, the traveling craftsman would not have to carry so many tools with them to job sites, in that their space would be limited to the vehicle or to the beast of burden they were driving. Multi-use tools solve the problem of having to deal with many different tools.


Use by other animals

Tool use by animals is a phenomenon in which an animal uses any kind of tool in order to achieve a goal such as acquiring food and water, grooming, defense, communication,
recreation Recreation is an activity of leisure, leisure being discretionary time. The "need to do something for recreation" is an essential element of human biology and psychology. Recreational activities are often done for enjoyment, amusement, or pleasur ...
or construction. Originally thought to be a skill possessed only by humans, some tool use requires a sophisticated level of cognition. There is considerable discussion about the definition of what constitutes a tool and therefore which behaviours can be considered true examples of tool use. Observation has confirmed that a number of species can use tools including
monkey Monkey is a common name that may refer to most mammals of the infraorder Simiiformes, also known as the simians. Traditionally, all animals in the group now known as simians are counted as monkeys except the apes, which constitutes an incomple ...
s, apes, elephants, several birds, and
sea otter The sea otter (''Enhydra lutris'') is a marine mammal native to the coasts of the northern and eastern North Pacific Ocean. Adult sea otters typically weigh between , making them the heaviest members of the weasel family, but among the small ...
s. Now the unique relationship of humans with tools is considered to be that we are the only species that uses tools to make ''other'' tools.
Primates Primates are a diverse order of mammals. They are divided into the strepsirrhines, which include the lemurs, galagos, and lorisids, and the haplorhines, which include the tarsiers and the simians (monkeys and apes, the latter including huma ...
are well known for using tools for hunting or gathering food and water, cover for rain, and self-defense. Chimpanzees have often been the object of study in regard to their usage of tools, most famously by Jane Goodall, since these animals are frequently kept in captivity and are closely related to humans. Wild tool-use in other primates, especially among
apes Apes (collectively Hominoidea ) are a clade of Old World simians native to sub-Saharan Africa and Southeast Asia (though they were more widespread in Africa, most of Asia, and as well as Europe in prehistory), which together with its sister g ...
and
monkeys Monkey is a common name that may refer to most mammals of the infraorder Simiiformes, also known as the simians. Traditionally, all animals in the group now known as simians are counted as monkeys except the apes, which constitutes an incomple ...
, is considered relatively common, though its full extent remains poorly documented, as many primates in the wild are mainly only observed distantly or briefly when in their natural environments and living without human influence. Some novel tool-use by primates may arise in a localized or isolated manner within certain unique primate cultures, being transmitted and practiced among socially connected primates through cultural learning. Many famous researchers, such as Charles Darwin in his book '' The Descent of Man'', mentioned tool-use in
monkeys Monkey is a common name that may refer to most mammals of the infraorder Simiiformes, also known as the simians. Traditionally, all animals in the group now known as simians are counted as monkeys except the apes, which constitutes an incomple ...
(such as
baboons Baboons are primates comprising the genus ''Papio'', one of the 23 genera of Old World monkeys. There are six species of baboon: the hamadryas baboon, the Guinea baboon, the olive baboon, the yellow baboon, the Kinda baboon and the chacma ba ...
). Among other mammals, both wild and captive
elephants Elephants are the largest existing land animals. Three living species are currently recognised: the African bush elephant, the African forest elephant, and the Asian elephant. They are the only surviving members of the family Elephantidae and ...
are known to create tools using their trunks and feet, mainly for swatting flies, scratching, plugging up waterholes that they have dug (to close them up again so the water doesn't evaporate), and reaching food that is out of reach. Many other social mammals particularly have been observed engaging in tool-use. A group of dolphins in
Shark Bay Shark Bay (Malgana: ''Gathaagudu'', "two waters") is a World Heritage Site in the Gascoyne region of Western Australia. The http://www.environment.gov.au/heritage/places/world/shark-bay area is located approximately north of Perth, on the ...
uses
sea sponges Sponges, the members of the phylum Porifera (; meaning 'pore bearer'), are a basal animal clade as a sister of the diploblasts. They are multicellular organisms that have bodies full of pores and channels allowing water to circulate through ...
to protect their beaks while foraging. Sea otters will use rocks or other hard objects to dislodge food (such as
abalone Abalone ( or ; via Spanish , from Rumsen ''aulón'') is a common name for any of a group of small to very large marine gastropod molluscs in the family (biology), family Haliotidae. Other common name In biology, a common name of a taxon o ...
) and break open
shellfish Shellfish is a colloquial and fisheries term for exoskeleton-bearing aquatic invertebrates used as food, including various species of molluscs, crustaceans, and echinoderms. Although most kinds of shellfish are harvested from saltwater envir ...
. Many or most mammals of the order
Carnivora Carnivora is a Clade, monophyletic order of Placentalia, placental mammals consisting of the most recent common ancestor of all felidae, cat-like and canidae, dog-like animals, and all descendants of that ancestor. Members of this group are f ...
have been observed using tools, often to trap or break open the shells of prey, as well as for scratching. Corvids (such as crows, ravens and
rooks Rook (''Corvus frugilegus'') is a bird of the corvid family. Rook or rooks may also refer to: Games *Rook (chess), a piece in chess *Rook (card game), a trick-taking card game Military *Sukhoi Su-25 or Rook, a close air support aircraft * USS ...
) are well known for their large brains (among
birds Birds are a group of warm-blooded vertebrates constituting the class Aves (), characterised by feathers, toothless beaked jaws, the laying of hard-shelled eggs, a high metabolic rate, a four-chambered heart, and a strong yet lightweigh ...
) and tool use.
New Caledonian crows The New Caledonian crow (''Corvus moneduloides'') is a medium-sized member of the family Corvidae, native to New Caledonia. The bird is often referred to as the 'qua-qua' due to its distinctive call. It eats a wide range of food, including many ...
are among the only animals that create their own tools. They mainly manufacture probes out of twigs and wood (and sometimes metal wire) to catch or impale
larvae A larva (; plural larvae ) is a distinct juvenile form many animals undergo before metamorphosis into adults. Animals with indirect development such as insects, amphibians, or cnidarians typically have a larval phase of their life cycle. The ...
. Tool use in some birds may be best exemplified in nest intricacy. Tailorbirds manufacture 'pouches' to make their nests in. Some birds, such as
weaver birds Ploceidae is a family of small passerine birds, many of which are called weavers, weaverbirds, weaver finches and bishops. These names come from the nests of intricately woven vegetation created by birds in this family. In most recent classifica ...
, build complex nests utilizing a diverse array of objects and materials, many of which are specifically chosen by certain birds for their unique qualities. Woodpecker finches insert twigs into trees in order to catch or impale larvae. Parrots may use tools to wedge nuts so that they can crack open the outer shell of nuts without launching away the inner contents. Some birds take advantage of human activity, such as carrion crows in Japan, which drop nuts in front of cars to crack them open. Several species of fish use tools to hunt and crack open shellfish, extract food that is out of reach, or clear an area for nesting. Among cephalopods (and perhaps uniquely or to an extent unobserved among invertebrates), octopuses are known to use tools relatively frequently, such as gathering coconut shells to create a shelter or using rocks to create barriers.


Tool metaphors

A telephone is a communication tool that interfaces between two people engaged in conversation at one level. It also interfaces between each user and the communication network at another level. It is in the domain of media and communications technology that a counter-intuitive aspect of our relationships with our tools first began to gain popular recognition.
Marshall McLuhan Herbert Marshall McLuhan (July 21, 1911 – December 31, 1980) was a Canadian philosopher whose work is among the cornerstones of the study of media theory. He studied at the University of Manitoba and the University of Cambridge. He began his ...
famously said "We shape our tools. And then our tools shape us." McLuhan was referring to the fact that our social practices co-evolve with our use of new tools and the refinements we make to existing tools.


See also

*
Antique tool Although an antique tool might be said to be one that is more than a hundred years old, the term is often used to describe any old tool of quality that might be deemed collectable. The use of tools is one of the primary means by which humans are di ...
* Ergonomics * List of timber framing tools *
Tool library A tool library is an example of a Library of Things. Tool libraries allow patrons to check out or borrow tools, equipment and "how-to" instructional materials, functioning either as a rental shop, with a charge for borrowing the tools, or more c ...
*
Toolbank ToolBank USA is a not-for-profit organization based in Atlanta, Georgia with a mission to strengthen local communities through the establishment of ToolBank affiliates across the United States and the provision of infrastructure to support affi ...
* Toolmaker


References


External links

* * {{Authority control Industrial equipment Tools ceb:Himan