Tool Interface Standards Committee

A tool is an object that can extend an individual's ability to modify features of the surrounding environment or help them accomplish a particular task. Although many animals use simple tools, only human beings, whose use of stone tools dates back Paleolithic, hundreds of millennia, have been observed using tools to make other tools.

Early human tools, made of such materials as Rock (geology), stone, bone, and wood, were used for preparation of food, hunting, manufacture of Weapon, weapons, and working of materials to produce clothing and useful artifacts. The development of metalworking made additional types of tools possible. Harnessing energy sources, such as Working animal, animal power, wind, or steam, allowed increasingly complex tools to produce an even larger range of items, with the Industrial Revolution marking an inflection point in the use of tools. The introduction of widespread automation in the 19th and 20th centuries allowed tools to operate with minimal human supervision, further increasing the productivity of human labor.

Definition

While a common-sense understanding of the meaning of tool is widespread, several formal definitions have been proposed.

In 1981, Benjamin Beck published a widely used definition of tool use. This has been modified to:Other, briefer definitions have been proposed:

History

Anthropology, Anthropologists believe that the use of tools was an important step in the human evolution, evolution of mankind. Because tools are used extensively by both humans and wild Common chimpanzee, chimpanzees, it is widely assumed that the first routine use of tools took place prior to the divergence between the two species. These early tools, however, were likely made of perishable materials such as sticks, or consisted of unmodified stones that cannot be distinguished from other stones as tools.

Stone artifacts date back to about 2.5 million years ago. Also (paperback) However, a 2010 study suggests the hominin species ''Australopithecus afarensis'' ate meat by carving animal Carcasses of animals, carcasses with stone implements. This finding pushes back the earliest known use of stone tools among hominins to about 3.4 million years ago. Finds of actual tools date back at least 2.6 million years in Ethiopia. One of the earliest distinguishable stone tool forms is the hand axe.

Up until recently, weapons found in digs were the only tools of "early man" that were studied and given importance. Now, more tools are recognized as culturally and historically relevant. As well as hunting, other activities required tools such as preparing food, "...nutting, leatherworking, grain harvesting and woodworking..." Included in this group are "flake stone tools".

Tools are the most important items that the ancient humans used to climb to the top of the food chain; by inventing tools, they were able to accomplish tasks that human bodies could not, such as using a spear or bow and arrow, bow to kill Predation, prey, since their teeth were not sharp enough to pierce many animals' skins. “Man the hunter” as the catalyst for Hominin change has been questioned. Based on marks on the bones at archaeological sites, it is now more evident that pre-humans were scavenging off of other predators' carcasses rather than killing their own food.

Timeline of ancient tool development

Many tools were made in prehistory or in the early centuries of recorded history, but archaeological evidence can provide dates of development and use.
* Olduvai Gorge, Olduvai stone technology (Oldowan) 2.5 million years ago (scrapers; to butcher dead animals)
* Huts, 2 million years ago.
* Acheulean stone technology 1.6 million years ago (hand axe)
* Fire creation and manipulation, used since the Paleolithic, possibly by Homo erectus as early as 1 E13 s, 1.5 Million years ago
* Boats, 900,000 years ago.
* Cooking, 500,000 years ago.
* Javelins, 400,000 years ago.
* adhesive, Glue, 200,000 years ago.
* Clothing possibly 170,000 years ago.
* Stone tools, used by Homo floresiensis, possibly 1 E12 s, 100,000 years ago.
* Harpoons, 90,000 years ago.
* Bow and arrows, 70,000–60,000 years ago.
* Sewing needles, 60,000 - 50,000 BC
* Flutes, 43,000 years ago.
* Fishing nets, 43,000 years ago.
* Ropes, 40,000 years ago.
* Ceramics c. 25,000 BC
* Fish hook, Fishing hooks, C. 23,000 years ago.
* Domestication of animals, c. 15,000 BC
* Sling (weapon) c. 9th millennium BC
* Microliths c. 9th millennium BC
* Brick used for construction in the Middle East c. 6000 BC
* Agriculture and Plough c. 4000 BC
* Wheel c. 4000 BC
* Gnomon c. 4000 BC
* Writing systems c. 3500 BC
* Copper c. 3200 BC
* Bronze c. 2500 BC
* Salt c. 2500 BC
* Chariot c. 2000 BC
* Iron c. 1500 BC
* Sundial c. 800 BC
* Glass ca. 500 BC
* Catapult c. 400 BC
* Cast iron c. 400 BC
* Horseshoe c. 300 BC
* Stirrup first few centuries AD

Several of the six classic simple machines (wheel and axle, lever, pulley, inclined plane, Wedge (mechanical device), wedge, and Screw (simple machine), screw) were invented in Mesopotamia. The wheel and axle mechanism first appeared with the potter's wheel, invented in what is now Iraq during the 5th millennium BC. This led to the invention of the wheeled vehicle in Mesopotamia during the early 4th millennium BC. The lever was used in the shadoof water-lifting device, the first Crane (machine), crane machine, which appeared in Mesopotamia circa 3000 BC. and then in ancient Egyptian technology circa 2000 BC. The earliest evidence of Pulley, pulleys date back to Mesopotamia in the early 2nd millennium BC.

The Screw (simple machine), screw, the last of the simple machines to be invented, first appeared in Mesopotamia during the Neo-Assyrian period (911-609) BC. The Assyrian King Sennacherib (704–681 BC) claims to have invented automatic sluices and to have been the first to use water Screw pump, screw pumps, of up to 30 tons weight, which were cast using two-part clay molds rather than by the 'Lost-wax casting, lost wax' process.S Dalley, ''The Mystery of the Hanging Gardens of Babylon'', Oxford University Press(2013) The Jerwan Aqueduct (c. 688 BC) is made with stone arches and lined with waterproof concrete. The earliest evidence of Water wheel, water wheels and Watermill, watermills date back to the ancient Near East in the 4th century BC, specifically in the Persian Empire before 350 BC, in the regions of Mesopotamia (Iraq) and Persia (Iran). This pioneering use of water power constituted the first human-devised motive force not to rely on muscle power (besides the sail).

Mechanics, Mechanical devices experienced a major expansion in their use in Ancient Greece and Ancient Rome with the systematic employment of new energy sources, especially waterwheels. Their use expanded through the Dark Ages (historiography), Dark Ages with the addition of windmills.

Machine tools

Machine tools occasioned a surge in producing new tools in the industrial revolution, Industrial Revolution. Pre-industrial machinery was built by various craftsmenMillwmillwrights built water and windmills, Carpenter, carpenters made wooden framing, and smiths and turners made metal parts. Wooden components had the disadvantage of changing dimensions with temperature and humidity, and the various joints tended to rack (work loose) over time. As the Industrial Revolution progressed, machines with metal parts and frames became more common.

Other important uses of metal parts were in firearms and threaded fasteners, such as machine screws, bolts, and nuts. There was also the need for precision in making parts. Precision would allow better working machinery, interchangeability of parts, and standardization of threaded fasteners. The demand for metal parts led to the development of several Machine tool, machine tools. They have their origins in the tools developed in the 18th century by makers of clocks and watches and scientific instrument makers to enable them to batch-produce small mechanisms. Before the advent of machine tools, metal was worked manually using the basic hand tools of hammers, files, scrapers, saws, and chisels. Consequently, the use of metal machine parts was kept to a minimum. Hand methods of production were very laborious and costly and precision was difficult to achieve.. Reprinted by McGraw-Hill, New York and London, 1926 (); and by Lindsay Publications, Inc., Bradley, Illinois, (). With their inherent precision, machine tools enabled the economical production of interchangeable parts.

Examples of machine tools include:

* Broach (metalwork), Broaching machine
* Drill#Drill press, Drill press
* Gear shaper
* Hobbing machine
* Honing (metalworking), Hone
* Lathe (tool), Lathe
* Screw machine (automatic lathe), Screw machines
* Milling machine
* Shear (sheet metal)
* Shaper
* Bandsaw
* Planer (metalworking), Planer
* Stewart platform mills
* Grinding machine, Grinding machines
Advocates of nanotechnology expect a similar surge as tools become microscopic in size.

Types

One can classify tools according to their basic functions:
* Cutting and edge tools, such as the knife, sickle, scythe, hatchet, and axe, are wedge-shaped implements that produce a Shear stress, shearing force along a narrow face. Ideally, the edge of the tool needs to be Hardness, harder than the material being cut or the blade will become dulled with repeated use. But even resilient tools will require periodic sharpening, which is the process of removing deformation wear from the edge. Other examples of cutting tools include Chisel#Gouge, gouges and drill bits.
* Moving tools move large and tiny items. Many are levers which give the user a mechanical advantage. Examples of force-concentrating tools include the hammer which moves a nail or the Post maul, maul which moves a stake. These operate by applying compression (physical), physical compression to a surface. In the case of the screwdriver, the force is rotational and called torque. By contrast, an anvil concentrates force on an object being hammered by ''preventing'' it from moving away when struck. Writing implements deliver a fluid to a surface via compression to activate the ink cartridge. Grabbing and twisting nuts and bolts with pliers, a glove, a wrench, etc. likewise move items by applying torque (rotational force).
* Tools that enact chemical changes, including temperature and ignition, such as lighters and blowtorches.
* Guiding, measuring and perception tools include the ruler, glasses, Square (tool), square, sensors, straightedge, theodolite, microscope, Computer monitor, monitor, clock, phone, printer (computing), printer
* Shaping tools, such as Molding (process), molds, Jig (tool), jigs, trowels.
* Fastening tools, such as welders, soldering irons, rivet guns, nail guns, or glue guns.
* Information and data manipulation tools, such as Computer, computers, Integrated development environment, IDE, spreadsheets

Some tools may be combinations of other tools. An alarm-clock is for example a combination of a measuring tool (the clock) and a perception tool (the alarm). This enables the alarm-clock to be a tool that falls outside of all the categories mentioned above.

There is some debate on whether to consider protective gear items as tools, because they do not directly help perform work, just protect the worker like ordinary clothing. They do meet the general definition of tools and in many cases are necessary for the completion of the work. Personal protective equipment includes such items as Glove, gloves, safety glasses, earplug, ear defenders and biohazard suits.

Function

Tool substitution

Often, by design or coincidence, a tool may share key functional attributes with one or more other tools. In this case, some tools can substitute for other tools, either as a makeshift solution or as a matter of practical efficiency. "One tool does it all" is a motto of some importance for workers who cannot practically carry every specialized tool to the location of every work task, such as a carpenter who does not necessarily work in a shop all day and needs to do jobs in a customer's house. Tool substitution may be divided broadly into two classes: substitution "by-design", or "multi-purpose", and substitution as makeshift. Substitution "by-design" would be tools that are designed specifically to accomplish multiple tasks using only that one tool.

Substitution is "makeshift" when human ingenuity comes into play and a tool is used for an unintended purpose such as using a long screw driver to separate a cars control arm from a ball joint instead of using a tuning fork. In many cases, the designed secondary functions of tools are not widely known. For example, many wood-cutting hand saws integrate a Square (tool), square by incorporating a specially shaped handle that allows 90° and 45° angles to be marked by aligning the appropriate part of the handle with an edge and scribing along the back edge of the saw. The latter is illustrated by the saying "All tools can be used as hammers." Nearly all tools can be used to function as a hammer, even though very few tools are intentionally designed for it and even fewer work as well as the original.

Tools are also often used to substitute for many mechanical apparatuses, especially in older mechanical devices. In many cases a cheap tool could be used to occupy the place of a missing mechanical part. A window roller in a car could easily be replaced with a pair of Locking pliers, vise-grips or regular pliers. A transmission shifter or ignition switch would be able to be replaced with a screwdriver. Again, these would be considered tools that are being used for their unintended purposes, substitution as makeshift. Tools such as a rotary tool would be considered the substitution "by-design", or "multi-purpose". This class of tools allows the use of one tool that has at least two different capabilities. "Multi-purpose" tools are basically multiple tools in one device/tool. Tools such as this are often power tools that come with many different attachments like a rotary tool does, so you could say that a power drill is a "multi-purpose" tool because you can do more than just one thing with a power drill.

Multi-use tools

A multi-tool is a hand tool that incorporates several tools into a single, portable device; the Swiss army knife represents one of the earliest examples. Other tools have a primary purpose but also incorporate other functionality – for example, lineman's pliers incorporate a gripper and cutter and are often used as a hammer; and some hand saws incorporate a Square (tool), square in the right-angle between the blade's dull edge and the saw's handle. This would also be the category of "multi-purpose" tools, since they are also multiple tools in one (multi-use and multi-purpose can be used interchangeably – compare hand axe). These types of tools were specifically made to catch the eye of many different craftsman who traveled to do their work. To these workers these types of tools were revolutionary because they were one tool or one device that could do several different things. With this new revolution of tools, the traveling craftsman would not have to carry so many tools with them to job sites, in that their space would be limited to the vehicle or to the beast of burden they were driving. Multi-use tools solve the problem of having to deal with many different tools.

Use by other animals

Tool use by animals is a phenomenon in which an animal uses any kind of tool in order to achieve a goal such as acquiring food and water, Personal grooming, grooming, defense, Animal communication, communication, Play (activity), recreation or Animal architecture, construction. Originally thought to be a skill possessed only by Human, humans, some tool use requires a sophisticated level of cognition. There is considerable discussion about the definition of what constitutes a tool and therefore which behaviours can be considered true examples of tool use. Observation has confirmed that Tool use by animals, a number of species can use tools including monkeys, apes, elephants, several birds, and sea otters. Now the unique relationship of humans with tools is considered to be that we are the only species that uses tools to make ''other'' tools.Primates are well known for using tools for hunting or gathering food and water, cover for rain, and self-defense. Chimpanzees have often been the object of study in regard to their usage of tools, most famously by Jane Goodall, since these animals are frequently kept in captivity and are closely related to humans. Wild tool-use in other primates, especially among Ape, apes and monkeys, is considered relatively common, though its full extent remains poorly documented, as many primates in the wild are mainly only observed distantly or briefly when in their natural environments and living without human influence. Some novel tool-use by primates may arise in a localized or isolated manner within certain unique Animal culture, primate cultures, being transmitted and practiced among socially connected primates through Cultural learning#In non-human animals, cultural learning. Many famous researchers, such as Charles Darwin in his book ''The Descent of Man'', mentioned tool-use in Monkey, monkeys (such as Baboon, baboons).

Among other mammals, both wild and captive Elephant, elephants are known to create tools using their trunks and feet, mainly for swatting flies, scratching, plugging up waterholes that they have dug (to close them up again so the water doesn't evaporate), and reaching food that is out of reach. Many other Social animals, social mammals particularly have been observed engaging in tool-use. A group of Dolphin, dolphins in Shark Bay uses Sea sponge, sea sponges to protect their beaks while foraging. Sea otters will use rocks or other hard objects to dislodge food (such as abalone) and break open shellfish. Many or most mammals of the order Carnivora have been observed using tools, often to trap or break open the shells of prey, as well as for scratching.

Corvid, Corvids (such as Crow, crows, Raven (bird), ravens and Rook (bird), rooks) are well known for their large brains (among birds) and tool use. New Caledonian crow, New Caledonian crows are among the only animals that create their own tools. They mainly manufacture probes out of twigs and wood (and sometimes metal wire) to catch or impale Larva, larvae. Tool use in some birds may be best exemplified in nest intricacy. Tailorbird, Tailorbirds manufacture 'pouches' to make their nests in. Some birds, such as Weaver bird, weaver birds, build complex nests utilizing a diverse array of objects and materials, many of which are specifically chosen by certain birds for their unique qualities. Woodpecker finch, Woodpecker finches insert twigs into trees in order to catch or impale larvae. Parrots may use tools to wedge nuts so that they can crack open the outer shell of nuts without launching away the inner contents. Some birds take advantage of human activity, such as Carrion crow, carrion crows in Japan, which drop nuts in front of cars to crack them open.

Several species of fish use tools to hunt and crack open shellfish, extract food that is out of reach, or clear an area for nesting. Among cephalopods (and perhaps uniquely or to an extent unobserved among invertebrates), Octopus, octopuses are known to use tools relatively frequently, such as gathering coconut shells to create a shelter or using rocks to create barriers.

Tool metaphors

A telephone is a communication tool that interfaces between two people engaged in conversation at one level. It also interfaces between each user and the communication network at another level. It is in the domain of media and communications technology that a counter-intuitive aspect of our relationships with our tools first began to gain popular recognition. Marshall McLuhan famously said "We shape our tools. And then our tools shape us." McLuhan was referring to the fact that our social practices co-evolve with our use of new tools and the refinements we make to existing tools.

See also

* Antique tool
* Ergonomics
* List of timber framing tools
* Tool library
* Toolbank
* Toolmaker

References

External links

*
*

{{Authority control

Industrial equipment
Tools
ceb:Himan