HOME

TheInfoList



OR:

A is a
Japanese sword A is one of several types of traditionally made swords from Japan. Bronze swords were made as early as the Yayoi period (1000 BC – 300 AD), though most people generally refer to the curved blades made from the Heian period (794 – 1185) to the ...
characterized by a curved, single-edged blade with a circular or squared guard and long grip to accommodate two hands. Developed later than the ''
tachi A is a type of traditionally made Japanese sword (''nihonto'') worn by the samurai class of feudal Japan. ''Tachi'' and ''katana'' generally differ in length, degree of curvature, and how they were worn when sheathed, the latter depending on t ...
'', it was used by
samurai were the hereditary military nobility and officer caste of medieval and early-modern Japan from the late 12th century until their abolition in 1876. They were the well-paid retainers of the '' daimyo'' (the great feudal landholders). They h ...
in feudal Japan and worn with the edge facing upward. Since the
Muromachi period The is a division of Japanese history running from approximately 1336 to 1573. The period marks the governance of the Muromachi or Ashikaga shogunate (''Muromachi bakufu'' or ''Ashikaga bakufu''), which was officially established in 1338 by t ...
, many old ''
tachi A is a type of traditionally made Japanese sword (''nihonto'') worn by the samurai class of feudal Japan. ''Tachi'' and ''katana'' generally differ in length, degree of curvature, and how they were worn when sheathed, the latter depending on t ...
'' were cut from the root and shortened, and the blade at the root was crushed and converted into ''katana''. The specific term for ''katana'' in Japan is ''
uchigatana An is a type of Japanese sword worn by the samurai class of feudal Japan. The ''uchigatana'' was the descendant of the tachi. The official term for ''katana'' in Japan is ''uchigatana'' and the term ''katana'' often refers to single-edged swords ...
'' (打刀) and the term ''katana'' (刀) often refers to single-edged swords from around the world.


Etymology and loanwords

The word ''katana'' first appears in Japanese in the '' Nihon Shoki'' of 720. The term is a compound of ''kata'' ("one side, one-sided") + ''na'' ("blade"),1988, (''Kokugo Dai Jiten'', Revised Edition) (in Japanese), Tōkyō:
Shogakukan is a Japanese publisher of dictionaries, literature, comics (manga), non-fiction, DVDs, and other media in Japan. Shogakukan founded Shueisha, which also founded Hakusensha. These are three separate companies, but are together called the Hit ...
, entry available onlin
here
/span>
2006, ('' Daijirin''), Third Edition (in Japanese), Tōkyō:
Sanseidō is a Japanese publishing company known for publishing dictionaries and textbooks. Notable publications Dictionary * ''Daijirin'' : Japanese dictionary * ''Sanseido Kokugo Jiten'' : Japanese dictionary * ''Shin Meikai kokugo jiten The , com ...
,
1995, (''
Daijisen The is a general-purpose Japanese dictionary published by Shogakukan in 1995 and 1998. It was designed as an "all-in-one" dictionary for native speakers of Japanese, especially high school and university students. History Shogakukan intended for ...
'')
(in Japanese), Tōkyō:
Shogakukan is a Japanese publisher of dictionaries, literature, comics (manga), non-fiction, DVDs, and other media in Japan. Shogakukan founded Shueisha, which also founded Hakusensha. These are three separate companies, but are together called the Hit ...
, , entry available onlin
here
/span>
in contrast to the double-sided '' tsurugi''. See more at the Wiktionary entry. The ''katana'' belongs to the ''nihontō'' family of swords, and is distinguished by a blade length (''nagasa'') of more than 2 ''
shaku Shaku may refer to: * Shaku (unit) * Shaku (ritual baton) * Buddhist surname In East Asian Buddhism, monks and nuns usually adopt a Buddhist surname and a Dharma name, which are combined in the surname-first East-Asian naming order. Since the 4th c ...
'', approximately . ''Katana'' can also be known as ''dai'' or ''daitō'' among Western sword enthusiasts, although ''daitō'' is a generic name for any Japanese
long sword A longsword (also spelled as long sword or long-sword) is a type of European sword characterized as having a cruciform hilt with a grip for primarily two-handed use (around ), a straight double-edged blade of around , and weighing approximately ...
, literally meaning "big sword". As Japanese does not have separate plural and singular forms, both ''katanas'' and ''katana'' are considered acceptable forms in English. Pronounced , the '' kun'yomi'' (Japanese reading) of the ''
kanji are the logographic Chinese characters taken from the Chinese family of scripts, Chinese script and used in the writing of Japanese language, Japanese. They were made a major part of the Japanese writing system during the time of Old Japanese ...
'' 刀, originally meaning single edged blade (of any length) in
Chinese Chinese can refer to: * Something related to China * Chinese people, people of Chinese nationality, citizenship, and/or ethnicity **''Zhonghua minzu'', the supra-ethnic concept of the Chinese nation ** List of ethnic groups in China, people of va ...
, the word has been adopted as a
loanword A loanword (also loan word or loan-word) is a word at least partly assimilated from one language (the donor language) into another language. This is in contrast to cognates, which are words in two or more languages that are similar because th ...
by the Portuguese. In Portuguese the designation (spelled ''catana'') means "large knife" or machete.


Description

The ''katana'' is generally defined as the standard sized, moderately curved (as opposed to the older ''
tachi A is a type of traditionally made Japanese sword (''nihonto'') worn by the samurai class of feudal Japan. ''Tachi'' and ''katana'' generally differ in length, degree of curvature, and how they were worn when sheathed, the latter depending on t ...
'' featuring more curvature) Japanese
sword A sword is an edged, bladed weapon intended for manual cutting or thrusting. Its blade, longer than a knife or dagger, is attached to a hilt and can be straight or curved. A thrusting sword tends to have a straighter blade with a pointed ti ...
with a blade length greater than 60.6 cm (23.86 inches) (Japanese 2 Shaku). It is characterized by its distinctive appearance: a curved, slender, single-edged blade with a circular or squared guard (''
tsuba Japanese sword mountings are the various housings and associated fittings ('' tosogu'') that hold the blade of a Japanese sword when it is being worn or stored. refers to the ornate mountings of a Japanese sword (e.g. ''katana'') used when the ...
'') and long grip to accommodate two hands. With a few exceptions, ''katana'' and ''tachi'' can be distinguished from each other, if signed, by the location of the signature (''mei'') on the tang (''nakago''). In general, the ''mei'' should be carved into the side of the ''nakago'' which would face outward when the sword was worn. Since a ''tachi'' was worn with the cutting edge down, and the ''katana'' was worn with the cutting edge up, the ''mei'' would be in opposite locations on the tang. Western historians have said that ''katana'' were among the finest cutting weapons in world military history. However, the main weapons on the battlefield in the
Sengoku period The was a period in History of Japan, Japanese history of near-constant civil war and social upheaval from 1467 to 1615. The Sengoku period was initiated by the Ōnin War in 1467 which collapsed the Feudalism, feudal system of Japan under the ...
in the 15th century were ''yumi'' (bow), ''yari'' (spear) and ''tanegashima'' (gun), and ''katana'' and ''tachi'' were used only for close combat. During this period, the tactics changed to a group battle by ''ashigaru'' (foot soldiers) mobilized in large numbers, so '' naginata'' and ''tachi'' became obsolete as weapons on the battlefield and were replaced by ''yari'' and ''katana''. In the relatively peaceful
Edo period The or is the period between 1603 and 1867 in the history of Japan, when Japan was under the rule of the Tokugawa shogunate and the country's 300 regional '' daimyo''. Emerging from the chaos of the Sengoku period, the Edo period was characteriz ...
, ''katana'' increased in importance as a weapon, and at the end of the Edo period, ''shishi'' (political activists) fought many battles using ''katana'' as their main weapon. ''Katana'' and ''tachi'' were often used as gifts between daimyo (feudal lord) and samurai, or as offerings to the ''
kami are the deities, divinities, spirits, phenomena or "holy powers", that are venerated in the Shinto religion. They can be elements of the landscape, forces of nature, or beings and the qualities that these beings express; they can also be the sp ...
'' enshrined in
Shinto shrines A is a structure whose main purpose is to house ("enshrine") one or more ''kami'', the deities of the Shinto religion. Overview Structurally, a Shinto shrine typically comprises several buildings. The '' honden''Also called (本殿, meani ...
, and symbols of authority and spirituality of samurai.''歴史人'' September 2020. pp.40-43. Kazuhiko Inada (2020), ''Encyclopedia of the Japanese Swords''. p42.


History

The production of swords in Japan is divided into specific time periods:Transition of kotō, shintō, shinshintō, and gendaitō.
Nagoya Japanese Sword Museum Touken World
* ''Jōkotō'' (ancient swords, until around 900) * ''Kotō'' (old swords from around 900–1596) * ''Shintō'' (new swords 1596–1780) * ''Shinshintō'' (newer swords 1781–1876) * ''Gendaitō'' (modern or contemporary swords 1876–present)


''Kotō'' (Old swords)

''Katana'' originates from ''sasuga'' (刺刀), a kind of '' tantō'' (short sword or knife) used by lower-ranking samurai who fought on foot in the
Kamakura period The is a period of Japanese history that marks the governance by the Kamakura shogunate, officially established in 1192 in Kamakura by the first ''shōgun'' Minamoto no Yoritomo after the conclusion of the Genpei War, which saw the struggle bet ...
(1185–1333). Their main weapon was a long '' naginata'' and ''sasuga'' was a spare weapon. In the Nanboku-chō period (1336-1392) which corresponds to the early
Muromachi period The is a division of Japanese history running from approximately 1336 to 1573. The period marks the governance of the Muromachi or Ashikaga shogunate (''Muromachi bakufu'' or ''Ashikaga bakufu''), which was officially established in 1338 by t ...
(1336-1573), long weapons such as '' ōdachi'' were popular, and along with this, ''sasuga'' lengthened and finally became ''katana''. Also, there is a theory that ''koshigatana'' (腰刀), a kind of ''tantō'' which was equipped by high ranking samurai together with ''
tachi A is a type of traditionally made Japanese sword (''nihonto'') worn by the samurai class of feudal Japan. ''Tachi'' and ''katana'' generally differ in length, degree of curvature, and how they were worn when sheathed, the latter depending on t ...
'', developed to ''katana'' through the same historical background as ''sasuga'', and it is possible that both developed to ''katana''.Differences in Japanese swords according to status.
Nagoya Japanese Sword Museum Touken World.
The oldest ''katana'' in existence today is called ''Hishizukuri uchigatana'', which was forged in the Nanbokuchō period, and was dedicated to Kasuga Shrine later.Kazuhiko Inada (2020), ''Encyclopedia of the Japanese Swords''. p43. The first use of ''katana'' as a word to describe a long sword that was different from a ''
tachi A is a type of traditionally made Japanese sword (''nihonto'') worn by the samurai class of feudal Japan. ''Tachi'' and ''katana'' generally differ in length, degree of curvature, and how they were worn when sheathed, the latter depending on t ...
'', occurs as early as the Kamakura Period. These references to "''uchigatana''" and "''tsubagatana''" seem to indicate a different style of sword, possibly a less costly sword for lower-ranking warriors. Starting around the year 1400, long swords signed with the ''katana-''style ''mei'' were made. This was in response to ''samurai'' wearing their ''tachi'' in what is now called "''katana'' style" (cutting edge up). Japanese swords are traditionally worn with the ''mei'' facing away from the wearer. When a ''tachi'' was worn in the style of a ''katana'', with the cutting edge up, the ''tachi'''s signature would be facing the wrong way. The fact that
swordsmiths Bladesmithing is the art of making knives, swords, daggers and other blades using a forge, hammer, anvil, and other smithing tools. Bladesmiths employ a variety of metalworking techniques similar to those used by blacksmiths, as well as woodworkin ...
started signing swords with a ''katana'' signature shows that some ''samurai'' of that time period had started wearing their swords in a different manner. By the 15th century, Japanese swords, including ''katana'', had already gained international fame by being exported to China and Korea.Takeo Tanaka (1982) ''対外関係と文化交流''. p.348. Shibunkaku. For example, Korea learned how to make Japanese swords by sending swordsmiths to Japan and inviting Japanese swordsmiths to Korea. According to the record of June 1, 1430 in the '' Veritable Records of the Joseon Dynasty'', a Korean swordsmith who went to Japan and mastered the method of making Japanese swords presented a Japanese sword to the King of Korea and was rewarded for the excellent work which was no different from the swords made by the Japanese. Traditionally, ''yumi'' (bows) were the main weapon of war in Japan, and ''tachi'' and ''naginata'' were used only for close combat. The
Ōnin War The , also known as the Upheaval of Ōnin and Ōnin-Bunmei war, was a civil war that lasted from 1467 to 1477, during the Muromachi period in Japan. ''Ōnin'' refers to the Japanese era during which the war started; the war ended during the Bunmei ...
in the late 15th century in the Muromachi period expanded into a large-scale domestic war, in which employed farmers called '' ashigaru'' were mobilized in large numbers. They fought on foot using ''katana'' shorter than ''tachi''. In the
Sengoku period The was a period in History of Japan, Japanese history of near-constant civil war and social upheaval from 1467 to 1615. The Sengoku period was initiated by the Ōnin War in 1467 which collapsed the Feudalism, feudal system of Japan under the ...
(period of warring states) in the late Muromachi period, the war became bigger and ''ashigaru'' fought in a close formation using ''yari'' (spears) lent to them. Furthermore, in the late 16th century, ''tanegashima'' (muskets) were introduced from Portugal, and Japanese swordsmiths mass-produced improved products, with ''ashigaru'' fighting with leased guns. On the battlefield in Japan, guns and spears became main weapons in addition to bows. Due to the changes in fighting styles in these wars, the ''tachi'' and ''naginata'' became obsolete among samurai, and the ''katana'', which was easy to carry, became the mainstream. The dazzling looking ''tachi'' gradually became a symbol of the authority of high-ranking samurai.History of Japanese swords "Muromachi period - Azuchi-Momoyama period".
Nagoya Japanese Sword Museum Touken World
Arms for battle - spears, swords, bows.
Nagoya Japanese Sword Museum Touken World
On the other hand, ''kenjutsu'' (swordsmanship) that makes use of the characteristics of ''katana'' was invented. The quicker draw of the sword was well suited to combat where victory depended heavily on short response times. (The practice and martial art for drawing the sword quickly and responding to a sudden attack was called '' Battōjutsu'', which is still kept alive through the teaching of Iaido.) The ''katana'' further facilitated this by being worn thrust through a belt-like sash (''
obi #REDIRECT Obi #REDIRECT Obi {{redirect category shell, {{R from other capitalisation{{R from ambiguous title ...
{{redirect category shell, {{R from other capitalisation{{R from ambiguous title ...
'') with the sharpened edge facing up. Ideally, samurai could draw the sword and strike the enemy in a single motion. Previously, the curved ''tachi'' had been worn with the edge of the blade facing down and suspended from a belt. From the 15th century, low-quality swords were mass-produced under the influence of the large-scale war. These swords, along with spears, were lent to recruited farmers called ''ashigaru'' and swords were exported. Such mass-produced swords are called ''kazuuchimono'', and swordsmiths of the Bisen school and Mino school produced them by division of labor.''歴史人'' September 2020. p40. ''歴史人'' September 2020. pp.70-71. The export of ''katana'' and ''tachi'' reached its peak during this period, from the late 15th century to early 16th century when at least 200,000 swords were shipped to
Ming Dynasty The Ming dynasty (), officially the Great Ming, was an Dynasties in Chinese history, imperial dynasty of China, ruling from 1368 to 1644 following the collapse of the Mongol Empire, Mongol-led Yuan dynasty. The Ming dynasty was the last ort ...
China in official trade in an attempt to soak up the production of Japanese weapons and make it harder for
pirates Piracy is an act of robbery or criminal violence by ship or boat-borne attackers upon another ship or a coastal area, typically with the goal of stealing cargo and other valuable goods. Those who conduct acts of piracy are called pirates, v ...
in the area to arm. In the Ming Dynasty of China, Japanese swords and their tactics were studied to repel pirates, and ''
wodao The ''wodao'' () is a Chinese sword from the Ming dynasty and Qing dynasty. It is typically long and slender, but heavy, with a curved back and sharp blade. It bears a strong resemblance to the Tang sword, zhanmadao, Tachi or Odachi in form. Exta ...
'' and ''
miaodao The ''miaodao'' (苗刀) is a Chinese two-handed dao or saber of the Republican Era, with a narrow blade, long hilt, and an overall length of or more. The name means "sprout saber", presumably referring to a likeness between the weapon and a ne ...
'' were developed based on Japanese swords.Takeo Tanaka. (2012) ''Wokou'' p.104.
Kodansha is a Japanese privately-held publishing company headquartered in Bunkyō, Tokyo. Kodansha is the largest Japanese publishing company, and it produces the manga magazines ''Nakayoshi'', ''Afternoon'', ''Evening'', ''Weekly Shōnen Magazine'' an ...
.
From this period, the
tang Tang or TANG most often refers to: * Tang dynasty * Tang (drink mix) Tang or TANG may also refer to: Chinese states and dynasties * Jin (Chinese state) (11th century – 376 BC), a state during the Spring and Autumn period, called Tang (唐) b ...
(''nakago'') of many old ''tachi'' were cut and shortened into ''katana''. This kind of remake is called ''suriage'' (磨上げ).日本刀鑑賞のポイント「日本刀の姿」
Nagoya Touken Museum Touken World
For example, many of the ''tachi'' that
Masamune , was a medieval Japanese blacksmith widely acclaimed as Japan's greatest swordsmith. He created swords and daggers, known in Japanese as ''tachi'' and ''tantō'', in the ''Sōshū'' school. However, many of his forged ''tachi'' were made into ...
forged during the Kamakura period were converted into ''katana'', so his only existing works are ''katana'' and ''tantō''.相州伝の名工「正宗」.
Nagoya Japanese Sword Museum Touken World.
From around the 16th century, many Japanese swords were exported to
Thailand Thailand ( ), historically known as Siam () and officially the Kingdom of Thailand, is a country in Southeast Asia, located at the centre of the Indochinese Peninsula, spanning , with a population of almost 70 million. The country is bo ...
, where katana-style swords were made and prized for battle and art work, and some of them are in the collections of the Thai royal family. From the late Muromachi period (Sengoku period) to the early
Edo period The or is the period between 1603 and 1867 in the history of Japan, when Japan was under the rule of the Tokugawa shogunate and the country's 300 regional '' daimyo''. Emerging from the chaos of the Sengoku period, the Edo period was characteriz ...
, ''samurai'' were sometimes equipped with a ''katana'' blade pointing downwards like a ''tachi''. This style of sword is called ''handachi'', "half ''tachi''". In ''handachi'', both styles were often mixed, for example, fastening to the ''obi'' was ''katana'' style, but metalworking of the scabbard was ''tachi'' style. In the Muromachi period, especially the Sengoku period, people such as farmers, townspeople, and monks could have a sword. However, in 1588
Toyotomi Hideyoshi , otherwise known as and , was a Japanese samurai and ''daimyō'' (feudal lord) of the late Sengoku period regarded as the second "Great Unifier" of Japan.Richard Holmes, The World Atlas of Warfare: Military Innovations that Changed the Cour ...
banned farmers from owning weapons and conducted a sword hunt to forcibly remove swords from anyone identifying as a farmer. The length of the ''katana'' blade varied considerably during the course of its history. In the late 14th and early 15th centuries, ''katana'' blades tended to have lengths between . During the early 16th century, the average length dropped about , approaching closer to . By the late 16th century, the average length had increased again by about , returning to approximately .


''Shintō'' (New swords)

Swords forged after 1596 in the
Keichō was a after ''Bunroku'' and before ''Genna''. This period spanned from October 1596 to July 1615. The reigning emperors were and . Change of era * 1596 : The era name was changed to ''Keichō'' to mark the passing of various natural disasters ...
period of the
Azuchi–Momoyama period The was the final phase of the in Japanese history from 1568 to 1600. After the outbreak of the Ōnin War in 1467, the power of the Ashikaga Shogunate effectively collapsed, marking the start of the chaotic Sengoku period. In 1568, Oda Nobuna ...
are classified as ''shintō'' (New swords). Japanese swords after ''shintō'' are different from ''kotō'' in forging method and steel (''
tamahagane ''Tamahagane'' (玉鋼) is a type of steel made in the Japanese tradition. The word ''tama'' means "precious". The word ''hagane'' means "steel". Tamahagane is used to make Japanese swords, knives, and other kinds of tools. The carbon content ...
''). This is thought to be because Bizen school, which was the largest swordsmith group of Japanese swords, was destroyed by a great flood in 1590 and the mainstream shifted to Mino school, and because
Toyotomi Hideyoshi , otherwise known as and , was a Japanese samurai and ''daimyō'' (feudal lord) of the late Sengoku period regarded as the second "Great Unifier" of Japan.Richard Holmes, The World Atlas of Warfare: Military Innovations that Changed the Cour ...
virtually unified Japan, uniform steel began to be distributed throughout Japan. The ''kotō'' swords, especially the Bizen school swords made in the Kamakura period, had a ''midare-utsuri'' like a white mist between '' hamon'' and ''shinogi'', but in the swords after ''shintō'' it has almost disappeared. In addition, the whole body of the blade became whitish and hard. Almost no one was able to reproduce ''midare-utsurii'' until Kunihira Kawachi reproduced it in 2014.History of Japanese sword.
Nagoya Japanese Sword Museum Touken World
日本刀鑑賞のポイント「日本刀の映りとは」.
Nagoya Japanese Sword Museum Touken World
As the
Sengoku period The was a period in History of Japan, Japanese history of near-constant civil war and social upheaval from 1467 to 1615. The Sengoku period was initiated by the Ōnin War in 1467 which collapsed the Feudalism, feudal system of Japan under the ...
(period of warring states) ended and the Azuchi-Momoyama period to the
Edo period The or is the period between 1603 and 1867 in the history of Japan, when Japan was under the rule of the Tokugawa shogunate and the country's 300 regional '' daimyo''. Emerging from the chaos of the Sengoku period, the Edo period was characteriz ...
started, ''katana''-forging also developed into a highly intricate and well-respected art form. Lacquered ''saya'' (scabbards), ornate engraved fittings, silk handles and elegant ''tsuba'' (handguards) were popular among ''samurai'' in the Edo Period, and eventually (especially when Japan was in peace time), katana became more cosmetic and ceremonial items than practical weapons.Masayuki Murata. ''明治工芸入門'' p.120. Me no Me, 2017 The Umetada school led by Umetada Myoju who was considered to be the founder of ''shinto'' led the improvement of the artistry of Japanese swords in this period. They were both swordsmiths and metalsmiths, and were famous for carving the blade, making metal accouterments such as ''tsuba'' (handguard), remodeling from ''tachi'' to ''katana'' (''suriage''), and inscriptions inlaid with gold. During this period, the
Tokugawa shogunate The Tokugawa shogunate (, Japanese 徳川幕府 ''Tokugawa bakufu''), also known as the , was the military government of Japan during the Edo period from 1603 to 1868. Nussbaum, Louis-Frédéric. (2005)"''Tokugawa-jidai''"in ''Japan Encyclopedia ...
required samurai to wear ''Katana'' and shorter swords in pairs. These short swords were '' wakizashi'' and '' tantō'', and ''wakizashi'' were mainly selected. This set of two is called a '' daishō''. Only ''samurai'' could wear the ''daishō'': it represented their social power and personal honour. ''Samurai'' could wear decorative sword mountings in their daily lives, but the Tokugawa shogunate regulated the formal sword that ''samurai'' wore when visiting a castle by regulating it as a ''daisho'' made of a black scabbard, a hilt wrapped with white ray skin and black string.Kazuhiko Inada (2020), ''Encyclopedia of the Japanese Swords''. p46. Japanese swords made in this period are classified as ''shintō''.''歴史人'' September 2020. pp.42-43.


''Shinshintō'' (New new swords)

In the late 18th century, swordsmith Suishinshi Masahide criticized that the present ''katana'' blades only emphasized decoration and had a problem with their toughness. He insisted that the bold and strong ''kotō'' blade from the Kamakura period to the Nanboku-chō period was the ideal Japanese sword, and started a movement to restore the production method and apply it to ''Katana''. ''Katana'' made after this is classified as a ''shinshintō''. One of the most popular swordsmiths in Japan today is Minamoto Kiyomaro who was active in this ''shinshintō'' period. His popularity is due to his timeless exceptional skill, as he was nicknamed "
Masamune , was a medieval Japanese blacksmith widely acclaimed as Japan's greatest swordsmith. He created swords and daggers, known in Japanese as ''tachi'' and ''tantō'', in the ''Sōshū'' school. However, many of his forged ''tachi'' were made into ...
in
Yotsuya is a neighborhood in Shinjuku, Tokyo, Japan. It is a former ward (四谷区 ''Yotsuya-ku'') in the now-defunct Tokyo City. In 1947, when the 35 wards of Tokyo were reorganized into 23, it was merged with Ushigome ward of Tokyo City and Yodobas ...
" after his disastrous life. His works were traded at high prices and exhibitions were held at museums all over Japan from 2013 to 2014. The idea that the blade of a sword in the Kamakura period is the best has been continued until now, and as of the 21st century, 80% of Japanese swords designated as National treasure in Japan were made in the Kamakura period, and 70% of them were ''tachi''.日本刀の格付けと歴史.
Touken World

Sankei Shimbun. 2 July 2017
The arrival of Matthew Perry in 1853 and the subsequent
Convention of Kanagawa The Convention of Kanagawa, also known as the Kanagawa Treaty (, ''Kanagawa Jōyaku'') or the Japan–US Treaty of Peace and Amity (, ''Nichibei Washin Jōyaku''), was a treaty signed between the United States and the Tokugawa Shogunate on March ...
caused chaos in Japanese society. Conflicts began to occur frequently between the forces of ''
sonnō jōi was a ''yojijukugo'' (four-character compound) phrase used as the rallying cry and slogan of a political movement in Japan in the 1850s and 1860s during the Bakumatsu period. Based on Neo-Confucianism and Japanese nativism, the movement sought ...
'' (尊王攘夷派), who wanted to overthrow the Tokugawa Shogunate and rule by the Emperor, and the forces of ''sabaku'' (佐幕派), who wanted the Tokugawa Shogunate to continue. These political activists, called the '' shishi'' (志士), fought using a practical ''katana'', called the ''kinnōtō'' (勤皇刀) or the '' bakumatsutō'' (幕末刀). Their ''katana'' were often longer than 90 cm (35.43 in) in blade length, less curved, and had a big and sharp point, which was advantageous for stabbing in indoor battles.


''Gendaitō'' (Modern or contemporary swords)


Meiji – World War II

During the
Meiji period The is an era of Japanese history that extended from October 23, 1868 to July 30, 1912. The Meiji era was the first half of the Empire of Japan, when the Japanese people moved from being an isolated feudal society at risk of colonization ...
, the ''samurai'' class was gradually disbanded, and the special privileges granted to them were taken away, including the right to carry swords in public. The Haitōrei Edict in 1876 forbade the carrying of swords in public except for certain individuals, such as former samurai lords (''
daimyō were powerful Japanese magnates, feudal lords who, from the 10th century to the early Meiji era, Meiji period in the middle 19th century, ruled most of Japan from their vast, hereditary land holdings. They were subordinate to the shogun and n ...
''), the military, and the police. Skilled swordsmiths had trouble making a living during this period as Japan modernized its military, and many swordsmiths started making other items, such as farm equipment, tools, and cutlery. The craft of making swords was kept alive through the efforts of some individuals, notably Miyamoto Kanenori (宮本包則, 1830–1926) and Gassan Sadakazu (月山貞一, 1836–1918), who were appointed Imperial Household Artist. The businessman Mitsumura Toshimo (光村利藻, 1877-1955)tried to preserve their skills by ordering swords and sword mountings from the swordsmiths and craftsmen. He was especially enthusiastic about collecting sword mountings, and he collected about 3,000 precious sword mountings from the end of the Edo period to the Meiji period. About 1200 items from a part of his collection are now in the Nezu Museum. Military action by Japan in China and Russia during the Meiji period helped revive interest in swords, but it was not until the
Shōwa period Shōwa may refer to: * Hirohito (1901–1989), the 124th Emperor of Japan, known posthumously as Emperor Shōwa * Showa Corporation, a Japanese suspension and shock manufacturer, affiliated with the Honda keiretsu Japanese eras * Jōwa (Heian ...
that swords were produced on a large scale again. Japanese military swords produced between 1875 and 1945 are referred to as ''
guntō The was a ceremonial sword produced for the Imperial Japanese army and navy after the introduction of conscription in 1872. History During the Meiji period, the samurai class was gradually disbanded, and the Haitōrei Edict in 1876 forb ...
'' (military swords). During the pre-
World War II World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposin ...
military buildup, and throughout the war, all Japanese officers were required to wear a sword. Traditionally made swords were produced during this period, but in order to supply such large numbers of swords, blacksmiths with little or no knowledge of traditional Japanese sword manufacture were recruited. In addition, supplies of the Japanese steel (''
tamahagane ''Tamahagane'' (玉鋼) is a type of steel made in the Japanese tradition. The word ''tama'' means "precious". The word ''hagane'' means "steel". Tamahagane is used to make Japanese swords, knives, and other kinds of tools. The carbon content ...
'') used for swordmaking were limited, so several other types of steel were also used. Quicker methods of forging were also used, such as the use of
power hammers Power hammers are mechanical forging hammers that use an electrical power source or steam to raise the hammer preparatory to striking, and accelerate it onto the work being hammered. They are also called open die power forging hammers. They h ...
, and
quenching In materials science, quenching is the rapid cooling of a workpiece in water, oil, polymer, air, or other fluids to obtain certain material properties. A type of heat treating, quenching prevents undesired low-temperature processes, such as pha ...
the blade in oil, rather than hand forging and water. The non-traditionally made swords from this period are called ''shōwatō'', after the regnal name of the Emperor
Hirohito Emperor , commonly known in English-speaking countries by his personal name , was the 124th emperor of Japan, ruling from 25 December 1926 until his death in 1989. Hirohito and his wife, Empress Kōjun, had two sons and five daughters; he was ...
, and in 1937, the Japanese government started requiring the use of special stamps on the
tang Tang or TANG most often refers to: * Tang dynasty * Tang (drink mix) Tang or TANG may also refer to: Chinese states and dynasties * Jin (Chinese state) (11th century – 376 BC), a state during the Spring and Autumn period, called Tang (唐) b ...
(''nakago'') to distinguish these swords from traditionally made swords. During this period of war, older antique swords were remounted for use in military mounts. Presently, in Japan, ''shōwatō'' are not considered to be "true" Japanese swords, and they can be confiscated. Outside Japan, however, they are collected as historical artifacts.


Post-World War II

Between 1945 and 1953, sword manufacture and sword-related
martial arts Martial arts are codified systems and traditions of combat practiced for a number of reasons such as self-defense; military and law enforcement applications; combat sport, competition; physical, mental, and spiritual development; entertainment; a ...
were banned in Japan. Many swords were confiscated and destroyed, and swordsmiths were not able to make a living. Since 1953, Japanese swordsmiths have been allowed to work, but with severe restrictions: swordsmiths must be licensed and serve a five-year apprenticeship, and only licensed swordsmiths are allowed to produce Japanese swords (''nihonto''), only two longswords per month are allowed to be produced by each swordsmith, and all swords must be registered with the
Japanese Government The Government of Japan consists of legislative, executive and judiciary branches and is based on popular sovereignty. The Government runs under the framework established by the Constitution of Japan, adopted in 1947. It is a unitary state, c ...
. Outside Japan, some of the modern ''katanas'' being produced by western swordsmiths use modern steel alloys, such as L6 and A2. These modern swords replicate the size and shape of the Japanese ''katana'' and are used by martial artists for ''
iaidō , abbreviated , is a Japanese martial art that emphasizes being aware and capable of quickly drawing the sword and responding to sudden attacks.Christensen, Karen and Allen Guttmann et.al (2001) ''International Encyclopedia of Women and Sports ...
'' and even for cutting practice ('' tameshigiri''). Mass-produced swords including '' iaitō'' and '' shinken'' in the shape of ''katana'' are available from many countries, though China dominates the market. These types of swords are typically mass-produced and made with a wide variety of steels and methods. According to the Parliamentary Association for the Preservation and Promotion of Japanese Swords, organized by
Japanese Diet The is the national legislature of Japan. It is composed of a lower house, called the House of Representatives (, ''Shūgiin''), and an upper house, the House of Councillors (, '' Sangiin''). Both houses are directly elected under a paralle ...
members, many ''katana'' distributed around the world as of the 21st century are fake Japanese swords made in China. The '' Sankei Shimbun'' analyzed that this is because the Japanese government allowed swordsmiths to make only 24 Japanese swords per person per year in order to maintain the quality of Japanese swords. Many swordsmiths after the Edo period have tried to reproduce the sword of the Kamakura period which is considered as the best sword in the history of Japanese swords, but they have failed. Then, in 2014, Kunihira Kawachi succeeded in reproducing it and won the Masamune Prize, the highest honor as a swordsmith. No one could win the Masamune Prize unless he made an extraordinary achievement, and in the section of ''tachi'' and ''katana'', no one had won for 18 years before Kawauchi.


Types

''Katana'' are distinguished by their type of blade: * ''Shinogi-Zukuri'' is the most common blade shape for Japanese katana that provides both speed and cutting power. It features a distinct yokote: a line or bevel that separates the finish of the main blade and the finish of the tip. Shinogi-zukuri was originally produced after the Heian period. * ''Shobu-Zukuri '' is a variation of ''shinogi-zukuri'' without a ''yokote'', the distinct angle between the long cutting edge and the point section. Instead, the edge curves smoothly and uninterrupted into the point. * ''Kissaki-Moroha-Zukuri'' is a katana blade shape with a distinctive curved and double-edged blade. One edge of the blade is shaped in normal ''katana'' fashion while the tip is symmetrical and both edges of the blade are sharp.


Forging and construction

Typical features of Japanese swords represented by ''katana'' and ''tachi'' are a three-dimensional cross-sectional shape of an elongated pentagonal to hexagonal blade called ''shinogi-zukuri'', a style in which the blade and the
tang Tang or TANG most often refers to: * Tang dynasty * Tang (drink mix) Tang or TANG may also refer to: Chinese states and dynasties * Jin (Chinese state) (11th century – 376 BC), a state during the Spring and Autumn period, called Tang (唐) b ...
(''nakago'') are integrated and fixed to the hilt (''tsuka'') with a pin called ''mekugi'', and a gentle curve. When a ''shinogi-zukuri'' sword is viewed from the side, there is a ridge line of the thickest part of the blade called ''shinogi'' between the cutting-edge side and the back side. This ''shinogi'' contributes to lightening and toughening of the blade and high cutting ability.''歴史人'' September 2020. p36, p47, p50. ''Katana'' are traditionally made from a specialized Japanese steel called ''tamahagane'', which is created from a traditional smelting process that results in several, layered steels with different carbon concentrations. This process helps remove impurities and even out the carbon content of the steel. The age of the steel plays a role in the ability to remove impurities, with older steel having a higher oxygen concentration, being more easily stretched and rid of impurities during hammering, resulting in a stronger blade. The smith begins by folding and welding pieces of the steel several times to work out most of the differences in the steel. The resulting block of steel is then drawn out to form a billet. At this stage, it is only slightly curved or may have no curve at all. The ''katana'''s gentle curvature is attained by a process of differential hardening or differential quenching: the smith coats the blade with several layers of a wet clay slurry, which is a special concoction unique to each sword maker, but generally composed of clay, water and any or none of ash, grinding stone powder, or rust. This process is called ''tsuchioki''. The edge of the blade is coated with a thinner layer than the sides and spine of the sword, heated, and then quenched in water (few sword makers use oil to quench the blade). The slurry causes only the blade's edge to be hardened and also causes the blade to curve due to the difference in densities of the micro-structures in the steel. When steel with a carbon content of 0.7% is heated beyond 750 °C, it enters the
austenite Austenite, also known as gamma-phase iron (γ-Fe), is a metallic, non-magnetic allotrope of iron or a solid solution of iron with an alloying element. In plain-carbon steel, austenite exists above the critical eutectoid temperature of 1000 K ...
phase. When austenite is cooled very suddenly by quenching in water, the structure changes into
martensite Martensite is a very hard form of steel crystalline structure. It is named after German metallurgist Adolf Martens. By analogy the term can also refer to any crystal structure that is formed by diffusionless transformation. Properties Mart ...
, which is a very hard form of steel. When austenite is allowed to cool slowly, its structure changes into a mixture of ferrite and pearlite which is softer than martensite. This process also creates the distinct line down the sides of the blade called the ''hamon'', which is made distinct by polishing. Each ''hamon'' and each smith's style of ''hamon'' is distinct. After the blade is forged, it is then sent to be polished. The polishing takes between one and three weeks. The polisher uses a series of successively finer grains of polishing stones in a process called glazing, until the blade has a mirror finish. However, the blunt edge of the ''katana'' is often given a matte finish to emphasize the ''hamon''. Japanese swords are generally made by a division of labor between six and eight craftsmen. ''Tosho'' (''Toko'', ''Katanakaji'') is in charge of forging blades, ''togishi'' is in charge of polishing blades, ''kinkosi'' (''chokinshi'') is in charge of making metal fittings for sword fittings, ''shiroganeshi'' is in charge of making ''habaki'' (blade collar), ''sayashi'' is in charge of making scabbards, ''nurishi'' is in charge of applying lacquer to scabbards, ''tsukamakishi'' is in charge of making hilt, and ''tsubashi'' is in charge of making tsuba (hand guard). ''Tosho'' use apprentice swordsmiths as assistants. Prior to the Muromachi period, ''tosho'' and ''kacchushi'' (armorer) used surplus metal to make ''tsuba'', but from the Muromachi period onwards, specialized craftsmen began to make ''tsuba''. Nowadays, ''kinkoshi'' sometimes serves as ''shiroganeshi'' and ''tsubashi''.


Appreciation

Historically, katana have been regarded not only as weapons but also as works of art, especially for high-quality ones. For a long time, Japanese people have developed a unique appreciation method in which the blade is regarded as the core of their aesthetic evaluation rather than the sword mountings decorated with luxurious lacquer or metal works.How to appreciate a Japanese sword.
Tozando.
Kazuhiko Inada (2020), ''Encyclopedia of the Japanese Swords''. pp.117-119 It is said that the following three objects are the most noteworthy objects when appreciating a blade. The first is the overall shape referred to as ''sugata''. Curvature, length, width, tip, and shape of tang of the sword are the objects for appreciation. The second is a fine pattern on the surface of the blade, which is referred to as ''hada'' or ''jigane''. By repeatedly folding and forging the blade, fine patterns such as fingerprints, tree rings and bark are formed on its surface. The third is '' hamon''. Hamon is a white pattern of the cutting edge produced by quenching and tempering. The object of appreciation is the shape of hammon and the crystal particles formed at the boundary of hammon. Depending on the size of the particles, they can be divided into two types, a ''nie'' and a ''nioi'', which makes them look like stars or mist. In addition to these three objects, a swordsmith signature and a file pattern engraved on tang, and a carving inscribed on the blade, which is referred to as ''
horimono ''Horimono'' (, , literally carving, engraving), also known as ''chōkoku'' (, "sculpture"), are the engraved images in the blade of a nihonto () Japanese sword, which may include katana or tantō blades. The artist is called a ''chōkokushi'' () ...
'', are also the objects of appreciation. The Hon'ami clan, which was an authority of appraisal of Japanese swords, rated Japanese swords from these artistic points of view. In addition, experts of modern Japanese swords judge when and by which swordsmith school the sword was made from these artistic points of view. Generally, the blade and the sword mounting of Japanese swords are displayed separately in museums, and this tendency is remarkable in Japan. For example, the Nagoya Japanese Sword Museum "Nagoya Touken World", one of Japan's largest sword museums, posts separate videos of the blade and the sword mounting on its official website and YouTube.


Rating of Japanese swords and swordsmiths

In Japan, Japanese swords are rated by authorities of each period, and some of the authority of the rating is still valid today. In 1719,
Tokugawa Yoshimune was the eighth ''shōgun'' of the Tokugawa shogunate of Japan, ruling from 1716 until his abdication in 1745. He was the son of Tokugawa Mitsusada, the grandson of Tokugawa Yorinobu, and the great-grandson of Tokugawa Ieyasu. Lineage Yoshimune ...
, the 8th
shogun , officially , was the title of the military dictators of Japan during most of the period spanning from 1185 to 1868. Nominally appointed by the Emperor, shoguns were usually the de facto rulers of the country, though during part of the Kamakur ...
of the
Tokugawa shogunate The Tokugawa shogunate (, Japanese 徳川幕府 ''Tokugawa bakufu''), also known as the , was the military government of Japan during the Edo period from 1603 to 1868. Nussbaum, Louis-Frédéric. (2005)"''Tokugawa-jidai''"in ''Japan Encyclopedia ...
, ordered Hon'ami Kōchū, who was an authority of sword appraisal, to record swords possessed by ''
daimyo were powerful Japanese magnates, feudal lords who, from the 10th century to the early Meiji period in the middle 19th century, ruled most of Japan from their vast, hereditary land holdings. They were subordinate to the shogun and nominally ...
'' all over Japan in books. In the completed "''Kyōhō Meibutsu Chō''" (享保名物帳) 249 precious swords were described, and additional 25 swords were described later. The list also includes 81 swords that had been destroyed in previous fires. The precious swords described in this book were called "''Meibutsu''" (名物) and the criteria for selection were artistic elements, origins and legends. The list of "Meibutsu" includes 59 swords made by
Masamune , was a medieval Japanese blacksmith widely acclaimed as Japan's greatest swordsmith. He created swords and daggers, known in Japanese as ''tachi'' and ''tantō'', in the ''Sōshū'' school. However, many of his forged ''tachi'' were made into ...
, 34 by Awataguchi Yoshimitsu and 22 by Go Yoshihiro, and these three swordsmiths were considered special. ''Daimyo'' hid some swords for fear that they would be confiscated by the Tokugawa Shogunate, so even some precious swords were not listed in the book. For example, ''Daihannya Nagamitsu'' and ''
Yamatorige , equally known as Sanchōmō by its Sino-Japanese reading, is a ''tachi'' ( Japanese greatsword) forged during the middle Kamakura period (13th century). The set of the blade and its '' koshirae'' (mountings) is a National Treasure of Japan. It w ...
'', which are now designated as National Treasures, were not listed. Yamada Asaemon V, who was the official sword cutting ability examiner and executioner of the Tokugawa shogunate, published a book "''Kaiho Kenjaku''" (懐宝剣尺) in 1797 in which he ranked the cutting ability of swords. The book lists 228 swordsmiths, whose forged swords are called "'' Wazamono''" (業物) and the highest "''Saijo Ō Wazamono''" (最上大業物) has 12 selected. In the reprinting in 1805, one swordsmith was added to the highest grade, and in the major revised edition in 1830 "''Kokon Kajibiko''" (古今鍛冶備考), two swordsmiths were added to the highest grade, and in the end, 15 swordsmiths were ranked as the highest grade. The ''katana'' forged by
Nagasone Kotetsu (born Nagasone Okisato) was a Japanese swordmaker of the early Edo period. His father was an armorer who served Ishida Mitsunari, the lord of Sawayama. However, as Ishida was defeated by Tokugawa Ieyasu at the Battle of Sekigahara, the Nagaso ...
, one of the top-rated swordsmith, became very popular at the time when the book was published, and many counterfeits were made. In these books, the three swordsmiths treated specially in "''Kyōhō Meibutsu Chō''" and Muramasa, who was famous at that time for forging swords with high cutting ability, were not mentioned. The reasons for this are considered to be that Yamada was afraid of challenging the authority of the shogun, that he could not use the precious sword possessed by the daimyo in the examination, and that he was considerate of the legend of Muramasa's curse. At present, by the Law for the Protection of Cultural Properties, important swords of high historical value are designated as Important Cultural Properties (''Jūyō Bunkazai'', 重要文化財), and special swords among them are designated as
National Treasures National may refer to: Common uses * Nation or country ** Nationality – a ''national'' is a person who is subject to a nation, regardless of whether the person has full rights as a citizen Places in the United States * National, Maryland, ce ...
(''Kokuhō'', 国宝). The swords designated as cultural properties based on the law of 1930, which was already abolished, have the rank next to Important Cultural Properties as Important Art Object (''Jūyō Bijutsuhin'', 重要美術品). In addition, The Society for Preservation of Japanese Art Swords, a public interest incorporated foundation, rates high-value swords in four grades, and the highest grade Special Important Sword (''Tokubetsu Juyo Token'', 特別重要刀剣) is considered to be equivalent to the value of Important Art Object. Although swords owned by the
Japanese Imperial Family The , also referred to as the Imperial Family or the House of Yamato, comprises those members of the extended family of the reigning Emperor of Japan who undertake official and public duties. Under the present Constitution of Japan, the Emperor i ...
are not designated as National Treasures or Important Cultural Properties because they are outside the jurisdiction of the Law for the Protection of Cultural Properties, there are many swords of the National Treasure class, and they are called "''Gyobutsu''" (御物). Currently, there are several authoritative rating systems for swordsmiths. According to the rating approved by the Japanese government, from 1890 to 1947, two swordsmiths who were appointed as Imperial Household Artist and after 1955, six swordsmiths who were designated as Living National Treasure are regarded as the best swordsmiths. According to the rating approved by The Society for Preservation of Japanese Art Swords, a public interest incorporated foundation, 39 swordsmiths who were designated as ''Mukansa'' (無鑑査) since 1958 are considered to be the highest ranking swordsmiths. The best sword forged by Japanese swordsmiths is awarded the most honorable Masamune prize by The Society for Preservation of Japanese Art Swords. Since 1961, eight swordsmiths have received the Masamune Prize, and among them, three swordsmiths,
Masamine Sumitani was a Japanese swordsmith. Sumitani's family ran a soy-sauce manufacturing business, but rather than entering the family trade, Masamine opted to study at Ritsumeikan University, with a view to becoming a swordsmith, graduating in 1941 with a de ...
, Akitsugu Amata and Toshihira Osumi, have received the prize three times each and Sadakazu Gassan II has received the prize two times. These four people were designated both Living National Treasures and ''Mukansa''.


Usage in martial arts

''Katana'' were used by ''samurai'' both in the battlefield and for practicing several martial arts, and modern martial artists still use a variety of ''katana''. Martial arts in which training with ''katana'' is used include '' aikidō'', '' iaijutsu'', '' battōjutsu'', ''
iaidō , abbreviated , is a Japanese martial art that emphasizes being aware and capable of quickly drawing the sword and responding to sudden attacks.Christensen, Karen and Allen Guttmann et.al (2001) ''International Encyclopedia of Women and Sports ...
'', ''
kenjutsu is an umbrella term for all ('' ko-budō'') schools of Japanese swordsmanship, in particular those that predate the Meiji Restoration. Some modern styles of kendo and iaido that were established in the 20th century also included modern forms of ...
'', ''kendō'', ''
ninjutsu , sometimes used interchangeably with the modern term , is the martial art strategy and tactics of unconventional warfare, guerrilla warfare and espionage purportedly practised by the ninja. ''Ninjutsu'' was a separate discipline in some tradit ...
'' and ''
Tenshin Shōden Katori Shintō-ryū Written as 天眞正傳香取神道流 before adoption (1946) of Tōyō kanji. is one of the oldest extant Japanese martial arts, and an exemplar of '' bujutsu''. The Tenshin Shōden Katori Shintō-ryū was founded by Iizasa Ienao, born in 13 ...
''.'''' However, for safety reasons, katana used for martial arts are usually blunt edged, to reduce the risk of injury. Sharp katana are only really used during tameshigiri (blade testing), where a practitioner practices cutting a bamboo or tatami straw post.


Storage and maintenance

If mishandled in its storage or maintenance, the ''katana'' may become irreparably damaged. The blade should be stored horizontally in its sheath, curve down and edge facing upward to maintain the edge. It is extremely important that the blade remain well-oiled, powdered and polished, as the natural moisture residue from the hands of the user will rapidly cause the blade to rust if not cleaned off. The traditional oil used is chōji oil (99% mineral oil and 1% clove oil for fragrance). Similarly, when stored for longer periods, it is important that the ''katana'' be inspected frequently and aired out if necessary in order to prevent rust or mold from forming (mold may feed off the salts in the oil used to polish the blade).


World records

Multiple sword world records were made with a katana and verified by
Guinness World Records ''Guinness World Records'', known from its inception in 1955 until 1999 as ''The Guinness Book of Records'' and in previous United States editions as ''The Guinness Book of World Records'', is a reference book published annually, listing world ...
. Iaido master Isao Machii set the record for "Most martial arts katana cuts to one mat (suegiri)", "Fastest 1,000 martial arts sword cuts", "Most sword cuts to straw mats in three minutes", and "Fastest tennis ball (708km/h) cut by sword". There are various records for Tameshigiri. For example the Greek Agisilaos Vesexidis set the record for most martial arts sword cuts in one minute (73) on 25 June 2016.


Ownership and trade restrictions


Republic of Ireland

Under the Firearms and Offensive Weapons Act 1990 (Offensive Weapons) (Amendment) Order 2009, katanas made post-1953 are illegal unless made by hand according to traditional methods.


United Kingdom

As of April 2008, the
British government ga, Rialtas a Shoilse gd, Riaghaltas a Mhòrachd , image = HM Government logo.svg , image_size = 220px , image2 = Royal Coat of Arms of the United Kingdom (HM Government).svg , image_size2 = 180px , caption = Royal Arms , date_es ...
added swords with a curved blade of 50 cm (20 in) or over in length ("the length of the blade shall be the straight line distance from the top of the handle to the tip of the blade") to the Offensive Weapons Order.The Criminal Justice Act 1988 (Offensive Weapons)(Amendment) Order 2008
Opsi.gov.uk (19 November 2010). Retrieved 2013-08-08.
This ban was a response to reports that ''samurai'' swords were used in more than 80 attacks and four killings over the preceding four years. Those who violate the ban would be jailed up to six months and charged a
fine Fine may refer to: Characters * Sylvia Fine (''The Nanny''), Fran's mother on ''The Nanny'' * Officer Fine, a character in ''Tales from the Crypt'', played by Vincent Spano Legal terms * Fine (penalty), money to be paid as punishment for an offe ...
of £5,000.
Martial arts Martial arts are codified systems and traditions of combat practiced for a number of reasons such as self-defense; military and law enforcement applications; combat sport, competition; physical, mental, and spiritual development; entertainment; a ...
practitioners,
historical re-enactors Historical reenactment (or re-enactment) is an educational or entertainment activity in which mainly amateur hobbyists and history enthusiasts dress in historic uniforms or costumes and follow a plan to recreate aspects of a historical event or ...
and others may still own such swords. The sword can also be legal provided it was made in Japan before 1954, or was made using traditional sword making methods. It is also legal to buy if it can be classed as a "martial artist's weapon". This ban applies to
England England is a country that is part of the United Kingdom. It shares land borders with Wales to its west and Scotland to its north. The Irish Sea lies northwest and the Celtic Sea to the southwest. It is separated from continental Europe b ...
,
Wales Wales ( cy, Cymru ) is a Countries of the United Kingdom, country that is part of the United Kingdom. It is bordered by England to the Wales–England border, east, the Irish Sea to the north and west, the Celtic Sea to the south west and the ...
,
Scotland Scotland (, ) is a country that is part of the United Kingdom. Covering the northern third of the island of Great Britain, mainland Scotland has a border with England to the southeast and is otherwise surrounded by the Atlantic Ocean to the ...
and
Northern Ireland Northern Ireland ( ga, Tuaisceart Éireann ; sco, label= Ulster-Scots, Norlin Airlann) is a part of the United Kingdom, situated in the north-east of the island of Ireland, that is variously described as a country, province or region. Nort ...
. This ban was amended in August 2008 to allow sale and ownership without licence of "traditional" hand-forged ''katana''.EXPLANATORY MEMORANDUM TO THE CRIMINAL JUSTICE ACT 1988 (OFFENSIVE WEAPONS) (AMENDMENT No. 2): ORDER 2008
opsi.gov.uk. Retrieved 2013-08-08.


Gallery

File:Katana Hizen Tadayoshi I 2.jpg, A ''katana'' forged by ''Hizen Tadayoshi'' I. ('' Saijo Ō Wazamono'') Azuchi-Momoyama period. (top) Katana mounting, Late Edo period. (bottom) File:沃懸地葵紋螺鈿蒔絵打刀, Katana-style mounting attached to a tachi forged by Sukezane.jpg, Katana style sword mounting with hollyhocks design crests in ''maki-e'' lacquer and mother of pearl inlay on ''ikakeji'' lacuer ground. Edo period, 19th century. File:朱漆金蛭巻大小, Daishō Style Sword Mounting.jpg, '' Daishō'' style sword mounting, gold banding on red-lacquered ground. 16th century,
Azuchi–Momoyama period The was the final phase of the in Japanese history from 1568 to 1600. After the outbreak of the Ōnin War in 1467, the power of the Ashikaga Shogunate effectively collapsed, marking the start of the chaotic Sengoku period. In 1568, Oda Nobuna ...
. Important Cultural Property. Tokyo National Museum. These swords were owned by
Toyotomi Hideyoshi , otherwise known as and , was a Japanese samurai and ''daimyō'' (feudal lord) of the late Sengoku period regarded as the second "Great Unifier" of Japan.Richard Holmes, The World Atlas of Warfare: Military Innovations that Changed the Cour ...
. File:蠟色塗鞘打刀拵/牡丹図鐔/牡丹図揃金具 加納夏雄作 Katana koshirae.jpg, ''Katana'' mounting with a polished black lacquer sheath, Edo period.
Museum of Fine Arts, Boston The Museum of Fine Arts (often abbreviated as MFA Boston or MFA) is an art museum in Boston, Massachusetts. It is the 20th-largest art museum in the world, measured by public gallery area. It contains 8,161 paintings and more than 450,000 works ...
. File:黒蝋色花丸紋蒔絵螺鈿鞘大小拵 Kuro-roiro hanamaru-mon makie raden saya daishō koshirae.jpg, Black lacquered ''hanamaru
mon Mon, MON or Mon. may refer to: Places * Mon State, a subdivision of Myanmar * Mon, India, a town in Nagaland * Mon district, Nagaland * Mon, Raebareli, a village in Uttar Pradesh, India * Mon, Switzerland, a village in the Canton of Grisons * An ...
maki-e is a Japanese lacquer decoration technique in which pictures, patterns, and letters are drawn with lacquer on the surface of lacquerware, and then metal powder such as gold or silver is sprinkled and fixed on the surface of the lacquerware. The ...
raden is a Japanese termRaden.
Edo period The or is the period between 1603 and 1867 in the history of Japan, when Japan was under the rule of the Tokugawa shogunate and the country's 300 regional '' daimyo''. Emerging from the chaos of the Sengoku period, the Edo period was characteriz ...
. Important Cultural Property. Tokyo National Museum. File:Antique Japanese katana.JPG, Antique Japanese ''katana'' with
koshirae Japanese sword mountings are the various housings and associated fittings ('' tosogu'') that hold the blade of a Japanese sword when it is being worn or stored. refers to the ornate mountings of a Japanese sword (e.g. ''katana'') used when the ...
'' and '' shirasaya'', attributed to ''Sukenao'', 1600s. File:Japanese katana with horimono (blade carving).jpg, Japanese katana showing a ''
horimono ''Horimono'' (, , literally carving, engraving), also known as ''chōkoku'' (, "sculpture"), are the engraved images in the blade of a nihonto () Japanese sword, which may include katana or tantō blades. The artist is called a ''chōkokushi'' () ...
'' (blade carving), Metropolitan Museum of Art. File:Hilt of katana.jpg, Hilt of ''katana''. Early Edo period. File:Hilt of katana mounting. Late Edo period.jpg, The inscription (''mei'') on the tang (''nakago'') of a ''katana'' forged by Hizen tadayoshi I, Azuchi-Momoyama period. (top) Hilt of ''katana''. Late Edo period. (bottom) File:Koshirae daisho Met 36.25.1725.jpg, ''
Koshirae Japanese sword mountings are the various housings and associated fittings ('' tosogu'') that hold the blade of a Japanese sword when it is being worn or stored. refers to the ornate mountings of a Japanese sword (e.g. ''katana'') used when the ...
'' (mountings) of an Edo period ''daishō'', rayskin wrapped with silk. File:Kissaki no katana Met 2007.478.3.jpg, ''Kissaki'' (point) of an Edo period ''katana''.


See also

*
Longsword A longsword (also spelled as long sword or long-sword) is a type of European sword characterized as having a cruciform hilt with a grip for primarily two-handed use (around ), a straight double-edged blade of around , and weighing approximatel ...
*
Kenjutsu is an umbrella term for all ('' ko-budō'') schools of Japanese swordsmanship, in particular those that predate the Meiji Restoration. Some modern styles of kendo and iaido that were established in the 20th century also included modern forms of ...
*
Iaidō , abbreviated , is a Japanese martial art that emphasizes being aware and capable of quickly drawing the sword and responding to sudden attacks.Christensen, Karen and Allen Guttmann et.al (2001) ''International Encyclopedia of Women and Sports ...
* Japanese sword mountings *
Japanese sword A is one of several types of traditionally made swords from Japan. Bronze swords were made as early as the Yayoi period (1000 BC – 300 AD), though most people generally refer to the curved blades made from the Heian period (794 – 1185) to the ...
* Daishō *
Ōdachi The (large/great sword) or ''nodachi'' (野太刀, field sword) is a type of traditionally made Japanese sword (日本刀, nihontō) used by the samurai class of feudal Japan. The Chinese equivalent of this type of sword in terms of weight a ...
*
Tachi A is a type of traditionally made Japanese sword (''nihonto'') worn by the samurai class of feudal Japan. ''Tachi'' and ''katana'' generally differ in length, degree of curvature, and how they were worn when sheathed, the latter depending on t ...
* Wakizashi * Tenka-Goken ("Five Swords under Heaven") – five individual swords traditionally viewed as the best Japanese swords * Backsword *
Broadsword The basket-hilted sword is a sword type of the early modern era characterised by a basket-shaped guard that protects the hand. The basket hilt is a development of the quillons added to swords' crossguards since the Late Middle Ages. In mod ...
* Japanese swords in fiction * Korean sword *
Hengdang The Hengdang is a single edged sword with a long handle used by the Ahoms in India. The handle and the scabbard were designed in gold, silver or wood according to the position of the person. It is similar in many ways to the samurai sword or katana. ...
*
Dha (sword) Dha (; also spelled ''dah'') is the Burmese word for "knife" and "sword" similar term to daab or darb ( th, ดาบ) in Thai language for a single edge sword. The term dha is conventionally used to refer to a wide variety of knives and sword ...
*
Wodao The ''wodao'' () is a Chinese sword from the Ming dynasty and Qing dynasty. It is typically long and slender, but heavy, with a curved back and sharp blade. It bears a strong resemblance to the Tang sword, zhanmadao, Tachi or Odachi in form. Exta ...


References


Further reading

* * * * * Satō, Kanzan (1983). ''The Japanese Sword''. Kodansha International. . {{Authority control Japanese inventions Single-edged swords Japanese sword types Samurai swords Blade weapons