In
statistics
Statistics (from German language, German: ', "description of a State (polity), state, a country") is the discipline that concerns the collection, organization, analysis, interpretation, and presentation of data. In applying statistics to a s ...
, the Gauss–Markov theorem (or simply Gauss theorem for some authors) states that the
ordinary least squares (OLS) estimator has the lowest
sampling variance within the
class
Class, Classes, or The Class may refer to:
Common uses not otherwise categorized
* Class (biology), a taxonomic rank
* Class (knowledge representation), a collection of individuals or objects
* Class (philosophy), an analytical concept used d ...
of
linear
In mathematics, the term ''linear'' is used in two distinct senses for two different properties:
* linearity of a '' function'' (or '' mapping'');
* linearity of a '' polynomial''.
An example of a linear function is the function defined by f(x) ...
unbiased estimators, if the
errors in the
linear regression model are
uncorrelated, have
equal variances and expectation value of zero. The errors do not need to be
normal, nor do they need to be
independent and identically distributed (only
uncorrelated with mean zero and
homoscedastic with finite variance). The requirement that the estimator be unbiased cannot be dropped, since biased estimators exist with lower variance. See, for example, the
James–Stein estimator (which also drops linearity),
ridge regression, or simply any
degenerate estimator.
The theorem was named after
Carl Friedrich Gauss and
Andrey Markov, although Gauss' work significantly predates Markov's. But while Gauss derived the result under the assumption of independence and normality, Markov reduced the assumptions to the form stated above. A further generalization to
non-spherical errors was given by
Alexander Aitken.
Scalar case statement
Suppose we are given two random variable vectors,
and that we want to find the best linear estimator of
given
, using the best linear estimator
Where the parameters
and
are both real numbers.
Such an estimator
would have the same mean and standard deviation as
, that is,
.
Therefore, if the vector
has respective mean and standard deviation
, the best linear estimator would be
since
has the same mean and standard deviation as
.
Statement
Suppose we have, in matrix notation, the linear relationship
:
expanding to,
:
where
are non-random but unobservable parameters,
are non-random and observable (called the "explanatory variables"),
are random, and so
are random. The random variables
are called the "disturbance", "noise" or simply "error" (will be contrasted with "residual" later in the article; see
errors and residuals in statistics). Note that to include a constant in the model above, one can choose to introduce the constant as a variable
with a newly introduced last column of X being unity i.e.,
for all
. Note that though
as sample responses, are observable, the following statements and arguments including assumptions, proofs and the others assume under the only condition of knowing
but not
The Gauss–Markov assumptions concern the set of error random variables,
:
*They have mean zero:
*They are
homoscedastic, that is all have the same finite variance:
for all
and
*Distinct error terms are uncorrelated:
A linear estimator of
is a linear combination
:
in which the coefficients
are not allowed to depend on the underlying coefficients
, since those are not observable, but are allowed to depend on the values
, since these data are observable. (The dependence of the coefficients on each
is typically nonlinear; the estimator is linear in each
and hence in each random
which is why this is
"linear" regression.) The estimator is said to be unbiased
if and only if
In logic and related fields such as mathematics and philosophy, "if and only if" (often shortened as "iff") is paraphrased by the biconditional, a logical connective between statements. The biconditional is true in two cases, where either bo ...
:
regardless of the values of
. Now, let
be some linear combination of the coefficients. Then the
mean squared error
In statistics, the mean squared error (MSE) or mean squared deviation (MSD) of an estimator (of a procedure for estimating an unobserved quantity) measures the average of the squares of the errors—that is, the average squared difference betwee ...
of the corresponding estimation is
:
in other words, it is the expectation of the square of the weighted sum (across parameters) of the differences between the estimators and the corresponding parameters to be estimated. (Since we are considering the case in which all the parameter estimates are unbiased, this mean squared error is the same as the variance of the linear combination.) The best linear unbiased estimator (BLUE) of the vector
of parameters
is one with the smallest mean squared error for every vector
of linear combination parameters. This is equivalent to the condition that
:
is a positive semi-definite matrix for every other linear unbiased estimator
.
The ordinary least squares estimator (OLS) is the function
:
of
and
(where
denotes the
transpose of
) that minimizes the sum of squares of
residuals (misprediction amounts):
:
The theorem now states that the OLS estimator is a best linear unbiased estimator (BLUE).
The main idea of the proof is that the least-squares estimator is uncorrelated with every linear unbiased estimator of zero, i.e., with every linear combination
whose coefficients do not depend upon the unobservable
but whose expected value is always zero.
Remark
Proof that the OLS indeed ''minimizes'' the sum of squares of residuals may proceed as follows with a calculation of the
Hessian matrix and showing that it is positive definite.
The MSE function we want to minimize is
for a multiple regression model with ''p'' variables. The first derivative is
where
is the design matrix
The
Hessian matrix of second derivatives is
Assuming the columns of
are linearly independent so that
is invertible, let
, then
Now let
be an eigenvector of
.
In terms of vector multiplication, this means
where
is the eigenvalue corresponding to
. Moreover,
Finally, as eigenvector
was arbitrary, it means all eigenvalues of
are positive, therefore
is positive definite. Thus,
is indeed a global minimum.
Or, just see that for all vectors
. So the Hessian is positive definite if full rank.
Proof
Let
be another linear estimator of
with
where
is a
non-zero matrix. As we're restricting to ''unbiased'' estimators, minimum mean squared error implies minimum variance. The goal is therefore to show that such an estimator has a variance no smaller than that of
the OLS estimator. We calculate:
:
Therefore, since
is unobservable,
is unbiased if and only if
. Then:
:
Since
is a positive semidefinite matrix,
exceeds
by a positive semidefinite matrix.
Remarks on the proof
As it has been stated before, the condition of
is a positive semidefinite matrix is equivalent to the property that the best linear unbiased estimator of
is
(best in the sense that it has minimum variance). To see this, let
another linear unbiased estimator of
.
:
Moreover, equality holds if and only if
. We calculate
:
This proves that the equality holds if and only if
which gives the uniqueness of the OLS estimator as a BLUE.
Generalized least squares estimator
The
generalized least squares (GLS), developed by
Aitken,
extends the Gauss–Markov theorem to the case where the error vector has a non-scalar covariance matrix.
The Aitken estimator is also a BLUE.
Gauss–Markov theorem as stated in econometrics
In most treatments of OLS, the regressors (parameters of interest) in the
design matrix are assumed to be fixed in repeated samples. This assumption is considered inappropriate for a predominantly nonexperimental science like
econometrics
Econometrics is an application of statistical methods to economic data in order to give empirical content to economic relationships. M. Hashem Pesaran (1987). "Econometrics", '' The New Palgrave: A Dictionary of Economics'', v. 2, p. 8 p. 8 ...
. Instead, the assumptions of the Gauss–Markov theorem are stated conditional on
.
Linearity
The dependent variable is assumed to be a linear function of the variables specified in the model. The specification must be linear in its parameters. This does not mean that there must be a linear relationship between the independent and dependent variables. The independent variables can take non-linear forms as long as the parameters are linear. The equation
qualifies as linear while
can be transformed to be linear by replacing
by another parameter, say
. An equation with a parameter dependent on an independent variable does not qualify as linear, for example
, where
is a function of
.
Data transformations are often used to convert an equation into a linear form. For example, the
Cobb–Douglas function—often used in economics—is nonlinear:
:
But it can be expressed in linear form by taking the
natural logarithm
The natural logarithm of a number is its logarithm to the base of a logarithm, base of the e (mathematical constant), mathematical constant , which is an Irrational number, irrational and Transcendental number, transcendental number approxima ...
of both sides:
:
This assumption also covers specification issues: assuming that the proper functional form has been selected and there are no
omitted variables.
One should be aware, however, that the parameters that minimize the residuals of the transformed equation do not necessarily minimize the residuals of the original equation.
Strict exogeneity
For all
observations, the expectation—conditional on the regressors—of the error term is zero:
:
where
is the data vector of regressors for the ''i''th observation, and consequently
is the data matrix or design matrix.
Geometrically, this assumption implies that
and
are
orthogonal
In mathematics, orthogonality (mathematics), orthogonality is the generalization of the geometric notion of ''perpendicularity''. Although many authors use the two terms ''perpendicular'' and ''orthogonal'' interchangeably, the term ''perpendic ...
to each other, so that their
inner product (i.e., their cross moment) is zero.
:
This assumption is violated if the explanatory variables are
measured with error, or are
endogenous. Endogeneity can be the result of
simultaneity, where causality flows back and forth between both the dependent and independent variable.
Instrumental variable techniques are commonly used to address this problem.
Full rank
The sample data matrix
must have full column
rank.
:
Otherwise
is not invertible and the OLS estimator cannot be computed.
A violation of this assumption is
perfect multicollinearity, i.e. some explanatory variables are linearly dependent. One scenario in which this will occur is called "dummy variable trap," when a base dummy variable is not omitted resulting in perfect correlation between the dummy variables and the constant term.
Multicollinearity (as long as it is not "perfect") can be present resulting in a less efficient, but still unbiased estimate. The estimates will be less precise and highly sensitive to particular sets of data. Multicollinearity can be detected from
condition number or the
variance inflation factor, among other tests.
Spherical errors
The
outer product of the error vector must be spherical.
:
This implies the error term has uniform variance (
homoscedasticity
In statistics, a sequence of random variables is homoscedastic () if all its random variables have the same finite variance; this is also known as homogeneity of variance. The complementary notion is called heteroscedasticity, also known as hete ...
) and no
serial correlation. If this assumption is violated, OLS is still unbiased, but
inefficient. The term "spherical errors" will describe the
multivariate normal distribution: if
in the multivariate normal density, then the equation
is the formula for a
ball centered at μ with radius σ in n-dimensional space.
Heteroskedasticity occurs when the amount of error is correlated with an independent variable. For example, in a regression on food expenditure and income, the error is correlated with income. Low income people generally spend a similar amount on food, while high income people may spend a very large amount or as little as low income people spend. Heteroskedastic can also be caused by changes in measurement practices. For example, as statistical offices improve their data, measurement error decreases, so the error term declines over time.
This assumption is violated when there is
autocorrelation. Autocorrelation can be visualized on a data plot when a given observation is more likely to lie above a fitted line if adjacent observations also lie above the fitted regression line. Autocorrelation is common in time series data where a data series may experience "inertia." If a dependent variable takes a while to fully absorb a shock. Spatial autocorrelation can also occur geographic areas are likely to have similar errors. Autocorrelation may be the result of misspecification such as choosing the wrong functional form. In these cases, correcting the specification is one possible way to deal with autocorrelation.
When the spherical errors assumption may be violated, the generalized least squares estimator can be shown to be BLUE.
See also
*
Independent and identically distributed random variables
*
Linear regression
In statistics, linear regression is a statistical model, model that estimates the relationship between a Scalar (mathematics), scalar response (dependent variable) and one or more explanatory variables (regressor or independent variable). A mode ...
*
Measurement uncertainty
Other unbiased statistics
*
Best linear unbiased prediction (BLUP)
*
Minimum-variance unbiased estimator (MVUE)
References
Further reading
*
*
*
External links
Earliest Known Uses of Some of the Words of Mathematics: G(brief history and explanation of the name)
(makes use of matrix algebra)
{{DEFAULTSORT:Gauss-Markov theorem
Theorems in statistics