South African Class MC 2-6-6-0
   HOME

TheInfoList



OR:

The South African Railways Class MC 2-6-6-0 of 1912 was a steam locomotive. In 1912, the South African Railways placed ten Class MC Mallet articulated compound steam locomotives with a
2-6-6-0 Under the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with one pair of unpowered leading wheels, followed by two sets of three pairs of powered driving wheels and no trailing wheels. The whe ...
wheel arrangement in service in Natal.Espitalier, T.J.; Day, W.A.J. (1945). ''The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued).'' South African Railways and Harbours Magazine, May 1945. pp. 347-350, 356.Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912, pp. 9, 12, 15, 46 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)


Manufacturer

To augment the Mallet locomotive fleet operating across the more difficult sections of the Natal mainline, the South African Railways (SAR) placed an order with the
North British Locomotive Company The North British Locomotive Company (NBL, NB Loco or North British) was created in 1903 through the merger of three Glasgow locomotive manufacturing companies; Sharp, Stewart and Company (Atlas Works), Neilson, Reid and Company (Hyde Park Wor ...
for ten compound steam locomotives which were very similar to the Class MB. They were delivered and placed in service in May 1912, designated Class MC and numbered in the range from 1607 to 1616.North British Locomotive Company works list, compiled by Austrian locomotive historian Bernhard Schmeiser


Compounding

In a compound locomotive, steam is expanded in phases. After being expanded in a high-pressure cylinder and having then lost pressure and given up part of its heat, it is exhausted into a larger-volume low-pressure cylinder for secondary expansion, after which it is exhausted through the smokebox. Compounding Steam Engines In the compound
Mallet locomotive The Mallet locomotive is a type of articulated steam railway locomotive, invented by the Swiss engineer Anatole Mallet (1837–1919). The front of the locomotive articulated on a bogie. The compound steam system fed steam at boiler pressure ...
, the rear set of coupled wheels are driven by the smaller high-pressure cylinders, which are fed steam from the steam dome. Their spent steam is then fed to the larger low-pressure cylinders which drive the front set of coupled wheels. By comparison, in the more usual arrangement of simple expansion steam is expanded just once in any one cylinder before being exhausted through the smokebox.


Characteristics

Like the previous
Mallets A mallet is a tool used for imparting force on another object, often made of rubber or sometimes wood, that is smaller than a maul or beetle, and usually has a relatively large head. The term is descriptive of the overall size and proport ...
, these ten compound locomotives had
Walschaerts valve gear The Walschaerts valve gear is a type of valve gear used to regulate the flow of steam to the pistons in steam locomotives, invented by Belgium, Belgian railway mechanical engineering, engineer Egide Walschaerts in 1844. The gear is sometimes name ...
and used saturated steam. The high-pressure cylinders of the hind engine unit were equipped with
piston valves Piston valves are one form of valve used to control the flow of steam within a steam engine or locomotive. They control the admission of steam into the cylinders and its subsequent exhausting, enabling a locomotive to move under its own power ...
while the low-pressure cylinders of the front engine unit were equipped with slide valves. Their Type TM tenders were the same as those of the Classes 3 and 3B, with a coal capacity of and a water capacity of . The locomotives differed little from the previous Mallets in size, power and performance and may for all intents and purposes also have been classified as Class MB. It would seem that, compared to the
Cape Government Railways The Cape Government Railways (CGR) was the government-owned railway operator in the Cape Colony from 1874 until the creation of the South African Railways (SAR) in 1910. History Private railways The first railways at the Cape were privately own ...
which tended to group locomotives in the same Class which were dissimilar even to the extent of having different wheel arrangements, the early SAR at times took locomotive classification to the other extreme. Unlike the Class MB on which the sandboxes were placed on top of the boiler in accordance with American practice, the sandboxes of the Class MC were arranged on a different system, the advantages of which were questionable. The sandboxes for the hind engine unit were secured to the running board just to the rear of the high-pressure cylinders, while those for the front engine unit were placed on the upper sides of the boiler just to the rear of the smokebox.


Superheating

The Class MC were satisfactory locomotives but like the earlier Mallet compounds, they would have performed better if they had been superheated. Two of them, numbers 1612 and 1615, were later equipped with new boilers with superheaters and their coupled wheels were retyred to a diameter of . No others were modified in this manner.


Service

The Class MC joined the Class MA and MB fleet on the Natal mainline, working heavy coal trains between
Estcourt Estcourt () is a town in the uThukela District of KwaZulu-Natal Province, South Africa. The main economic activity is farming with large bacon and processed food factories situated around the town. The N3 freeway passes close to the town, link ...
and Highlands. In later years, some were transferred to the Cape Western System where they served into the 1930s as banking locomotives up the Hex River Railpass between
De Doorns De Doorns is situated in the Breede Valley Local Municipality, Cape Winelands District Municipality in the Western Cape province of South Africa. Location It lies in the Hex River Valley on the N1 National Route, 32 km north-east of Worcest ...
and Touws River. Others were transferred to the
Witwatersrand The Witwatersrand () (locally the Rand or, less commonly, the Reef) is a , north-facing scarp in South Africa. It consists of a hard, erosion-resistant quartzite metamorphic rock, over which several north-flowing rivers form waterfalls, which ...
for general service and to haul coal on the
Witbank Witbank (), officially Emalahleni, is a city situated on the Highveld of Mpumalanga, South Africa, within the Emalahleni Local Municipality. The name Witbank is Afrikaans for "white ridge", and is named after a white sandstone outcrop where wago ...
-
Germiston Germiston, also known as kwaDukathole, is a small city in the East Rand region of Gauteng, South Africa, administratively forming part of the City of Ekurhuleni Metropolitan Municipality since the latter's establishment in 2000. It functions as ...
line. They were withdrawn from service during 1933.Soul of A Railway, System 7, Western Transvaal, based in Johannesburg, Part 21: Witbank Line by Les Pivnic, Eugene Armer, Peter Stow and Peter Micenko. Caption 3.
(Accessed on 4 May 2017)


References

{{Commons category, South African Class MC (2-6-6-0), South African Class MC 2-6-6-0, position=right
2220 In contemporary history, the third millennium of the anno Domini or Common Era in the Gregorian calendar is the current millennium spanning the years 2001 to 3000 ( 21st to 30th centuries). Ongoing futures studies seek to understand what is l ...
2-6-6-0 locomotives (1C)C locomotives NBL locomotives Cape gauge railway locomotives Railway locomotives introduced in 1912 1912 in South Africa Scrapped locomotives