South African Class 7 4-8-0

The South African Railways Class 7 4-8-0 of 1892 was a steam locomotive from the pre-Union era in the Cape of Good Hope.

In 1892, the Cape Government Railways placed six 7th Class steam locomotives with a 4-8-0 Mastodon type wheel arrangement in service and, until 1893, another 32 were acquired. They were initially placed in service on the Midland System, but were later distributed between the Midland and Eastern Systems. The locomotives were renumbered in 1912, when they were assimilated into the South African Railways, but retained their Class 7 classification.Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, pp. 8, 12, 15, 37 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)

Manufacturers

In 1890, Michael Stephens, then Chief Locomotive Superintendent of the Cape Government Railways (CGR), accompanied General Manager C.B. Elliot on a visit to Durban, to examine and report on the new Dübs A (later NGR Class D) tank locomotives which had been placed in service by the Natal Government Railways (NGR) in 1888. In Elliot's subsequent report, he stated his conviction that locomotives with eight-coupled wheels should be adopted for the coastal sections of the Midland and Eastern Systems, where fog and the damp atmosphere were detrimental to tractive adhesion at night in the summer months.Espitalier, T.J.; Day, W.A.J. (1944). ''The Locomotive in South Africa - A Brief History of Railway Development. Chapter II - The Cape Government Railways'' (Continued). South African Railways and Harbours Magazine, January 1944. pp. 9-12.

Following this report, a complete design for such a locomotive was prepared at the Salt River works, under the supervision of Western System Locomotive Superintendent H.M. Beatty. The last six of an order for 36 Cape 5th Class 4-6-0 locomotives from Dübs and Company were cancelled and substituted with an order for six of these new 7th Class locomotives. They were delivered in 1892, numbered in the range from 315 to 320 for the Midland System. Two of them, numbers 318 and 320, were later renumbered to 701 and 702 and re-allocated to the Eastern System.

These six locomotives were equipped with type ZA tenders which rode on two two-axle bogies, the first proper bogie tenders to enter service in South Africa. They had a capacity of coal and water.South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). ''Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte''. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 41.South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). ''Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe''. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 41-42.

The first six locomotives were followed by an order for another 32 of these engines, which were delivered from Neilson and Company in 1892 and 1893. These engines were initially numbered in the range from 321 to 352 for the Midland System. Fifteen of them were later renumbered in the range from 703 to 717 and re-allocated to the Eastern System. They were equipped with type ZB tenders, which rode on three-axle bogies. They had a larger capacity of coal and water, with an average maximum axle load of .Neilson, Reid works list, compiled by Austrian locomotive historian Bernhard Schmeiser

While the Cape 6th Class, which was designed and ordered at the same time as the 7th Class, was conceived as a fast passenger locomotive, the 7th Class was conceived as its heavy goods locomotive counterpart. The 7th Class turned out to be a most useful and well liked locomotive type. It continued the attractive appearance of the Cape's locomotives, with a strong construction and sound design. Some remained in service for nearly eighty years.

Characteristics

The 7th Class represented a considerable advance in design and power. They were the first South African locomotives to be equipped with sight feed lubricators which allowed a sight glass to be positioned in the cab, where the rate of oil feed to the cylinders could be observed. The reversing gear was of the quick-threaded screw type instead of the reversing lever which had earlier been used.

The seats of the driver and stoker were mounted on poles which allowed them to be swung around to outside the cab. This was popular amongst crews, who could often be see riding outside the engine when working in the hotter areas of the country and in South West Africa.Soul of A Railway, System 7, Western Transvaal, based in Johannesburg, Part 7. Germiston Steam and Diesel Running Sheds (2nd section) by Les Pivnic. Caption 2.
(Accessed on 7 April 2017)

In his report for 1892, Stephens compared the hauling power of the 7th Class to that of older locomotives working between Port Elizabeth and Cradock on the Midland System as 22 to 14. Their even distribution of weight and flexibility rendered them very easy on the permanent way, while the crews declared them to be the steadiest engines they had yet had on the System, in spite of their height. Stephens regarded the 7th Class as maximum-power goods-train engines, although he believed that the limit of power on Cape gauge had not yet been reached.

Class 7 sub-classes

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, NGR and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways was only implemented with effect from 1 January 1912.''The South African Railways - Historical Survey''. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.

When these 38 locomotives were assimilated into the SAR in 1912, they were renumbered in the range from 950 to 987, but they retained their Class 7 designation.

The rest of the CGR's 7th Class locomotives, together with 7th Class locomotives from the Central South African Railways (CSAR), Pretoria-Pietersburg Railway (PPR), Rhodesia Railways (RR), the NGR and, in 1925, the New Cape Central Railways (NCCR), were grouped into six different sub-classes by the SAR and designated Classes 7A to 7F.

Modifications

During the 1930s and later, many of the Class 7 series locomotives were equipped with superheated boilers and piston valves. On the Class 7B and Class 7C, this conversion was sometimes indicated with an "S" suffix to the class number on the locomotive's number plates, but on the rest of the Class 7 family this distinction was rarely applied.

The superheated versions could be visually identified by the position of the chimney on the smokebox, the chimney having been displaced forward to provide space behind it in the smokebox for the superheater header. They were equipped with larger type ZE tenders, which rode on two two-axle bogies and had a capacity of coal and water.

Service

South Africa

The 7th Class became the main goods locomotive during the last twenty years of the existence of the CGR. The Class has been described as the Class 15F of its generation. For thirty years they handled most trains between Port Elizabeth and Cradock and on many other SAR mainlines. Three of them also saw service with the Imperial Military Railways (IMR) during the Second Boer War from 1899 to 1902, having been allocated to the IMR for the duration of the war. In SAR service, the Class 7 family did duty on every system in the country.Soul of A Railway - System 3 – Part 10: The Midland Main Line - Part 2: Paterson to Alicedale - Caption 3
(Accessed on 15 February 2017)

South West Africa

In 1915, shortly after the outbreak of the First World War, the German South West Africa colony was occupied by the Union Defence Forces. Since a large part of the territory's railway infrastructure and rolling stock was destroyed or damaged by retreating German forces, an urgent need arose for locomotives for use on the Cape gauge lines in that territory. In 1917, numbers 950, 952, 954, 957, 962, 967 to 969, 973, 979 and 984 were transferred to the Defence Department for service in South West Africa. One of the engines was lost at sea in the process and was subsequently replaced with Class 7A number 1000. The lost locomotive had been documented as being no. 984 but, since no. 984 was photographed in service at Walvisbaai c. 1955, this was an error.Espitalier, T.J.; Day, W.A.J. (1947). ''The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued).'' South African Railways and Harbours Magazine, December 1947. p. 1033.

These eleven locomotives remained in South West Africa after the war. They proved to be so successful in that territory, that more were gradually transferred there in later years. By the time the Class 24 locomotives arrived in SWA in 1949, 53 locomotives of the Class 7 family were still in use there.

Most remained there and were only transferred back to South Africa when the Class 32-000 diesel-electric locomotives replaced them in 1961. In South Africa, they remained at work in branchline service, particularly at Tarkastad and Ladysmith and also on the Touws River-Ladismith branchline, until they were finally withdrawn in 1972.

Industrial service

In 1966, two Class 7 locomotives, numbers 955 and 956, as well as four Class 7A and two Class 7B, were sold to the Zambesi Saw Mills (ZSM) in Zambia. The company worked the teak forests which stretched to the north-west of Livingstone in Zambia, where it built one of the longest logging railways in the world to serve its sawmill at Mulobezi. These eight locomotives joined eight ex Rhodesia Railways 7th Class locomotives which had been acquired by the ZSM between 1925 and 1956.

Railway operations ceased at Mulobezi around 1972, whilst operation of the line to Livingstone was taken over by the Zambia Railways in 1973. While most of the Class 7 locomotives remained at Mulobezi out of use, no. 955 was preserved at the Livingstone Railway Museum.Pattison, R.G. (2005). ''Thundering Smoke'', (1st ed.). Sable Publishing House. p42-48.

Preservation

Renumbering

During their long service lives, some of the Class 7 locomotives were renumbered multiple times. All were initially numbered onto the Midland System roster. Some were later renumbered onto the Eastern System roster, three saw service with the IMR and were temporarily renumbered accordingly, and all were eventually renumbered onto the SAR's roster in 1912. The table lists their renumbering as well as their builders and works numbers.

Illustration

The main picture shows ex Midland System Class 7 no. 344, later SAR Class 7 no. 975, plinthed at the Women's Memorial in Bloemfontein. Of the plinthed locomotives illustrated, CGR no. 345 (SAR no. 976) at Klerksdorp is actually Midland no. 332, later Eastern no. 707 and eventually SAR no. 980. It was restored bearing the CGR number plate and builder's works plate of CGR no. 345.

The main picture shows an engine with a type ZA tender. All the locomotives illustrated below are equipped with type ZC tenders

File:SAR Class 7 950 (4-8-0) ex CGR 315.JPG, Midland no. 315, SAR no. 950, plinthed at Upington, Northern Cape, 14 May 2006
File:SAR Class 7 970 (4-8-0) ex CGR 703.JPG, Midland no. 325, Eastern no. 703, SAR no. 970, Riversdale, 20 October 2009
File:SAR Class 7 976 (4-8-0) ex CGR 345 (or SAR 980 ex CGR 332-707).JPG, Midland no. 345, SAR no. 976, plinthed at Klerksdorp Station, North West, 20 September 2009
File:ZSR & SAR Class 7 955 (4-8-0) ex CGR 322.JPG, Midland no. 322, SAR no. 955, Zambesi Saw Mills (ZSM) at Livingstone in Zambia, 11 September 1997

References

{{Steam locomotive tenders

1450
1450
4-8-0 locomotives
2D locomotives
Dübs locomotives
Neilson locomotives
Cape gauge railway locomotives
Railway locomotives introduced in 1892
1892 in South Africa