Liaoningvenator

''Liaoningvenator'' (meaning "Liaoning hunter") is a genus of troodontid theropod dinosaur from the Early Cretaceous of China. It contains a single species, ''L. curriei'', named after paleontologist Phillip J. Currie in 2017 by Shen Cai-Zhi and colleagues from an articulated, nearly complete skeleton, one of the most complete troodontid specimens known. Shen and colleagues found indicative traits that placed ''Liaoningvenator'' within the Troodontidae. These traits included its numerous, small, and closely packed teeth, as well as the vertebrae towards the end of its tail having shallow grooves in place of neural spines on their top surfaces.

Within the Troodontidae, the closest relative of ''Liaoningvenator'' was ''Eosinopteryx'', and it was also closely related to ''Anchiornis'' and ''Xiaotingia''; while these have traditionally been placed outside the Troodontidae, the phylogenetic analysis conducted by Shen and colleagues offered evidence supporting the alternative identification of these paravians as troodontids. Compared to its close relatives, however, ''Liaoningvenator'' had relatively long legs, in particular the femora. As the fifth troodontid known from geographically and temporally comparable strata, ''Liaoningvenator'' increases the diversity of Chinese troodontids.

Description

With a total body length (estimated lengths of the skull, neck, trunk, and tail combined) of approximately , ''Liaoningvenator'' is a small troodontid.

Skull and jaws

''Liaoningvenator'' possesses a long, narrow, and triangular skull that measured long. At the front of the snout, like ''Sinovenator'' and ''Xixiasaurus'', the premaxilla excludes the maxilla from the rim of the nostril. There are three openings on the surface of the maxilla, the premaxillary, maxillary, and antorbital fenestrae. Below, the maxilla forms the secondary palate as in '' Byronosaurus'', ''Gobivenator'', and ''Xixiasaurus''. Uniquely among troodontids, the postorbital bone is slender and radiates into three processes. Like ''Zanabazar'', there is a pneumatic diverticulum in the jugal bone where an air sac was present within the bone; there is also a pneumatic opening on the rear side of the quadrate bone, as in other troodontids. Unlike ''Sauronithoides'', ''Zanabazar'', and ''Stenonychosaurus'', the crest separating the parietal bones does not participate in the border of the supratemporal (upper) temporal fenestra at the back of the skull.

Characteristic of troodontids, ''Liaoningvenator'' has a pitted groove on the outer edge of its shallow and triangular lower jaw. The bottom margin of the jaw is slightly convex; in ''Sinornithoides'', it is straight. The dentary and angular bones may have formed a flexible joint within the jaw - that is, an intramandibular joint. Unlike ''Xiaotingia'', the dentary and maxilla terminate at the same position in the jaw. Also like other troodontids (with ''Sinusonasus'' being an exception), ''Liaoningvenator'' has a number of small, closely spaced teeth, with at least 15 in the upper jaw and 23 in the lower jaw. The teeth towards the rear of the lower jaw are serrated, unlike a number of basal troodontids. The tooth row of the maxilla terminates below the front margin of the antorbital fenestra, whereas it terminates further forward - below the rear of the maxillary fenestra - in ''Jinfengopteryx''.

Vertebrae

There are ten cervical vertebrae, twelve dorsal (trunk) vertebrae, and at least sixteen caudal (tail) vertebrae in ''Liaoningvenator''. Out of the cervicals, the third to eighth are elongated, with the fifth being the longest; among the articular processes known as prezygapophyses, the fifth cervical also has the longest. In the third and fourth cervicals, the latter like other derived troodontids, the prezygapophyses are longer than another set of processes known as the postzygapophyses. In the dorsals, the pneumatic pitting is simplified relative to ''Anchiornis''. In the tail, the transition point - the point where the sides of the caudals become more compressed such that they are sub-triangular instead of rectangular - occurs at the seventh caudal, further forward than ''Sinornithoides'' and ''Mei'' (where it occurs at the ninth). The longest of the caudals is the fourteenth, which is almost twice the length of the sixth. On the underside of the caudals, the chevrons are slightly curved and directed backwards, as is seen in ''Deinonychus''.

Limbs

The acromion process on the scapula of ''Liaoningvenator'' is poorly developed, as in basal troodontids. Unlike basal troodontids, however, the glenoid - the arm socket - is directed vertically downwards instead of to the side. On the humerus, the deltopectoral crest extends for 40% of the bone's length, and terminates halfway down the bone. The humerus is shorter, relative to the femur, in ''Liaoningvenator'' (59% length) than in ''Eosinopteryx'' (80% length). Further below, the three-digited hand is unique in that the first phalanx of the first digit is longer than the second metacarpal, at 1.49 times the length of the latter.

As in ''Mei'', the top of the ilium has a curved sinusoidal shape in ''Liaoningvenator''. There is no crest over the acetabulum (hip socket) of ''Liaoningvenator'', unlike ''Anchiornis''. The rear portion of the ilium (the postacetabular process) also has a shorter bottom edge than both ''Anchiornis'' and ''Eosinopteryx''. Uniquely, there is no process on the top end at the tip of the ischium, and the bone also has a slender obturator process. The pubis points forwards in ''Liaoningvenator'', but backwards in ''Mei''. Additionally, the hindlimb of ''Liaoningvenator'' is twice the length of the torso, while in ''Mei'' it is 2.8 times the length of the torso. Unlike ''Sinovenator'', ''Liaoningvenator'' has a fourth trochanter on its femur. The tibia is slender and 1.4 times the length of the femur, like ''Sinornithoides''. The four-digited foot is highly compacted, with a tarsus that narrows toward the bottom. The third metatarsal is offset from the second and fourth, forming a trough between the latter two that is deeper than in other troodontids. Proportionally, the first phalanx of the second digit is shorter relative to the second phalanx in ''Liaoningvenator'' (135% length) than in ''Sinovenator'' (150% length).

Discovery and naming

''Liaoningvenator'' is known from a single specimen, a nearly complete and well-preserved skeleton with most bones preserved in their original articulated positions. It was found in the Lujiatun Beds of the Yixian Formation in Shangyuan, Beipiao, Liaoning, China; currently, it is stored at the Dalian Natural History Museum (DNHM) in Dalian, Liaoning under the accession number DNHM D3012. Some of the specimen's snout bones are incomplete and some toe phalanges have been added by illegal fossil traders; asides from this, it is one of the most complete troodontid fossils ever found. Its head is curved forward, and its limbs are tucked in; this differs from both the classic death pose (where the head is flexed backwards), as well as the sleeping posture of ''Mei'' and ''Sinornithoides''.

In 2017, DNHM D3012 was named as the type specimen of the new genus and species ''Liaoningvenator curriei'' by Shen Caizhi, Zhao Bo, Gao Chunling, Lü Junchang, and Martin Kundrát. The genus name ''Liaoningvenator'' combines Liaoning with the suffix ''-venator'', meaning "hunter" in Latin; the specific name ''curriei'' honors the contributions of Canadian paleontologist Philip John Currie to the research of small theropods.

Classification

Shen and colleagues identified ''Liaoningvenator'' as a member of the Troodontidae based on its numerous, closely spaced teeth that are constricted below the crown; the pneumatic opening on the rear of its quadrate; the oval shape of its foramen magnum; the replacement of neural spines by shallow midline grooves in the vertebrae towards the end of its tail; the tall ascending process on its astragalus; and its asymmetrical and subarctometatarsal (i.e. where the third metatarsal is somewhat pinched by the neighboring metatarsals) foot. They further placed it in the "higher troodontid clade" based on the lack of a bulbous capsule-like structure on the parasphenoid of its palate, and the presence of the promaxillary fenestra on its skull.

Based on a phylogenetic analysis modified from a prior analysis by Takanobu Tsuihiji and colleagues in 2016, which was in turn modified from the modification by Gao and colleagues in 2012 of an analysis by Xu Xing and colleagues in 2012, Shen and colleagues found that ''Liaoningvenator'' formed a unified group, or clade, with ''Eosinopteryx'', ''Anchiornis'', and ''Xiaotingia'', thus offering contrary evidence to the traditional placement of these taxa as non-troodontid members of the Paraves. They are united by the teeth being flattened and recurved, with the crowns in the middle of the tooth row having heights smaller than twice their widths; the front edge of the acromion being outturned; the presence of a pronounced notch between the acromion and the coracoid; the presence of a flange on the first phalanx of the second digit on the finger; and the backward-projecting pubis.

Within this clade, which Shen and colleagues did not name, ''Liaoningvenator'' formed a group with ''Eosinopteryx'' while ''Anchiornis'' formed a group with ''Xiaotingia''. The former two are united by the lack of serrated teeth at the front of the jaw; the skull being more than 90% of the length of the femur; the cervical ribs having slender shafts and being longer than their corresponding vertebrae; and the front end of the ilium being "gently straight". Meanwhile, the latter two share the tips of the neural spines on the dorsals being fan-shaped; the coracoid being sub-triangular; the claw on the first digit of the hand being strongly arched, being higher than the top of the articulating surface; the presence of a "lip" at the top end of the claws on the second and third digits; the front edge of the pubic shaft being convex; and the claws on the third and fourth digits of the foot being strongly curved. The results of the phylogenetic analysis are reproduced in the below phylogenetic tree.

Paleobiology

Histology

Thin sections from the tibia of the holotype specimen of ''Liaoningvenator'' indicate that the cortical bone is thick. The cortex is divided into four zones by lines of arrested growth (LAGs), which indicates that the animal was at least four years old when it died (further LAGs may have been obliterated by the expansion of the medullary cavity). Shen and colleagues suggested, based on the thinness of the innermost zone 1 compared to zone 2, that it had partially eroded away. However, the complete zone 3 is even thinner, being only a quarter of the width of zone 2, and zone 4 is even thinner (albeit incomplete). This indicates that growth had slowed substantially by the end of the third year.

Each LAG is surrounded by two bands of dense avascular (i.e. lacking openings for blood vessels) bone, which Shen and colleagues termed the "pre-annular" and "post-annular" bands. The first LAG differs from the others in that it consists of two LAGs, one weaker than the other, indicating that growth mildly slowed before the resumption of bone growth. There is no external fundamental system (EFS) on the outer rim of the bone, indicating that the holotype was still growing at the time of death. However, the decreasing thinness of zones, the presence of avascular bone in the outer layers, and evidence of bone remodeling collectively suggest that it was close to skeletal maturity.

Paleoecology

According to Shen and colleagues, ''Liaoningvenator'' is one of eleven troodontids known from China, and the fifth Early Cretaceous Chinese troodontid after ''Sinovenator'', ''Sinusonasus'', ''Mei'', and ''Jinfengopteryx''. In a separate 2017 publication for which Shen was also the lead author, an additional troodontid was described, '' Daliansaurus'', which forms the Sinovenatorinae with the former three. With the exception of ''Jinfengopteryx'', all of these troodontids lived in the Lujiatun Beds. While Shen and colleagues assigned the Lujiatun Beds to the Hauterivian epoch, newer date estimates published by Chang Su-chin and colleagues suggested a younger age of ~126 Ma for the Lujiatun Beds, which dates to the Barremian epoch.

Contemporaneous dinosaurs included the microraptorine dromaeosaurid ''Graciliraptor''; the oviraptorosaur ''Incisivosaurus''; the ornithomimosaurs ''Shenzhousaurus'' and ''Hexing''; the proceratosaurid tyrannosauroid ''Dilong''; the titanosauriform sauropod ''Euhelopus''; the ornithopod '' Jeholosaurus''; and ceratopsians such as the ubiquitous ''Psittacosaurus'' as well as ''Liaoceratops''. Mammals present included ''Acristatherium'', ''Gobiconodon'', ''Juchilestes'', '' Maotherium'', '' Meemannodon'', and ''Repenomamus''. Other tetrapods included the frogs '' Liaobatrachus'' and '' Mesophryne''; and the lizard ''Dalinghosaurus''. The Lujiatun Beds consist of fluvial and volcaniclastic deposits, indicating a landscape of rivers bearing volcanoes, which may have killed the preserved animals by lahar. Mean annual air temperatures in the region reached a minimum of .

See also

*2017 in archosaur paleontology

References

{{Taxonbar, from=Q30115163

Early Cretaceous dinosaurs of Asia
Feathered dinosaurs
Troodontids
Fossil taxa described in 2017
Taxa named by Lü Junchang
Yixian fauna