Fourier Shift Theorem

A Fourier transform (FT) is a mathematical transform that decomposes functions into frequency components, which are represented by the output of the transform as a function of frequency. Most commonly functions of time or space are transformed, which will output a function depending on temporal frequency or spatial frequency respectively. That process is also called ''analysis''. An example application would be decomposing the waveform of a musical chord into terms of the intensity of its constituent pitches. The term ''Fourier transform'' refers to both the frequency domain representation and the mathematical operation that associates the frequency domain representation to a function of space or time.

The Fourier transform of a function is a complex-valued function representing the complex sinusoids that comprise the original function. For each frequency, the magnitude ( absolute value) of the complex value represents the amplitude of a constituent complex sinusoid with that frequency, and the argument of the complex value represents that complex sinusoid's phase offset. If a frequency is not present, the transform has a value of 0 for that frequency. The Fourier transform is not limited to functions of time, but the domain of the original function is commonly referred to as the ''time domain''. The Fourier inversion theorem provides a ''synthesis'' process that recreates the original function from its frequency domain representation.

Functions that are localized in the time domain have Fourier transforms that are spread out across the frequency domain and vice versa, a phenomenon known as the uncertainty principle. The critical case for this principle is the Gaussian function, of substantial importance in probability theory and statistics as well as in the study of physical phenomena exhibiting normal distribution (e.g., diffusion). The Fourier transform of a Gaussian function is another Gaussian function. Joseph Fourier introduced the transform in his study of heat transfer, where Gaussian functions appear as solutions of the heat equation.

The Fourier transform can be formally defined as an improper Riemann integral, making it an integral transform, although this definition is not suitable for many applications requiring a more sophisticated integration theory.Depending on the application a Lebesgue integral, distributional, or other approach may be most appropriate. For example, many relatively simple applications use the Dirac delta function, which can be treated formally as if it were a function, but the justification requires a mathematically more sophisticated viewpoint. provides solid justification for these formal procedures without going too deeply into functional analysis or the theory of distributions.

The Fourier transform can also be generalized to functions of several variables on Euclidean space, sending a function of 'position space' to a function of momentum (or a function of space and time to a function of 4-momentum). This idea makes the spatial Fourier transform very natural in the study of waves, as well as in quantum mechanics, where it is important to be able to represent wave solutions as functions of either position or momentum and sometimes both. In general, functions to which Fourier methods are applicable are complex-valued, and possibly vector-valued.In relativistic quantum mechanics one encounters vector-valued Fourier transforms of multi-component wave functions. In quantum field theory, operator-valued Fourier transforms of operator-valued functions of spacetime are in frequent use, see for example . Still further generalization is possible to functions on groups, which, besides the original Fourier transform on or (viewed as groups under addition), notably includes the discrete-time Fourier transform (DTFT, group = ), the discrete Fourier transform (DFT, group = ) and the Fourier series or circular Fourier transform (group = , the unit circle ≈ closed finite interval with endpoints identified). The latter is routinely employed to handle periodic functions. The fast Fourier transform (FFT) is an algorithm for computing the DFT.

Definitions

The analysis formula

The Fourier transform is an extension of the Fourier series, which in its most general form introduces the use of complex exponential functions. For example, for a function $f(x)$, the amplitude and phase of a frequency component at frequency $n/P, n \in \mathbb Z$, is given by this complex number:
:$c_n = \tfrac \int_P f(x) \, e^ \, dx.$

The extension provides a frequency continuum of components $\left(\xi \in \mathbb R\right),$ using an infinite integral of integration:

Here, the transform of function $f(x)$ at frequency $\xi$ is denoted by the complex number $\hat(\xi)$, which is just one of several common conventions. Evaluating for all values of $\xi$ produces the ''frequency-domain'' function. When the independent variable ($x$) represents ''time'' (often denoted by $t$), the transform variable ($\xi$) represents frequency (often denoted by $f$). For example, if time is measured in seconds, then frequency is in hertz.

A key to interpreting is that the effect of multiplying $f(x)$ by $e^$ is to subtract $\xi$ from every frequency component of function $f(x).$A possible source of confusion is the frequency-shifting property; i.e. the transform of function $f(x)e^$ is $\hat(\xi+\xi_0).$  The value of this function at  $\xi=0$  is $\hat(\xi_0),$ meaning that a frequency $\xi_0$ has been shifted to zero. (also see Negative frequency) So the component that was at $\xi$ ends up at zero hertz, and the integral produces its amplitude, because all the other components are oscillatory and integrate to zero over an infinite interval.

The functions $f$ and $\hat$ are often referred to as a ''Fourier transform pair''.  A common notation for designating transform pairs is:

:$f(x)\ \stackrel\ \hat f(\xi)\quad \text\quad \operatorname(x)\ \stackrel\ \operatorname(\xi)$
Fourier series cannot represent ''non-periodic'' waveforms. However, the Fourier transform is able to represent ''non-periodic'' waveforms as well. It achieves this by applying a limiting process to lengthen the period of any waveform to infinity and then treating that as a periodic waveform.

The synthesis formula

The actual Fourier series is a synthesis formula:

:$f(x) = \sum_^\infty c_n\, e^.$

And the Fourier transform extension is:The complex number, $\hat(\xi)$, conveys both amplitude and phase of frequency $\xi$. So is a representation of $f(x)$ as a weighted summation of complex exponential functions. This is known as the Fourier inversion theorem, and was first introduced in Fourier's ''Analytical Theory of Heat'', although a proof by modern standards was not given until much later.

Other notational conventions

For other common conventions and notations, including using the angular frequency instead of the ordinary frequency , see Other conventions and Other notations below. The Fourier transform on Euclidean space is treated separately, in which the variable often represents position and momentum. The conventions chosen in this article are those of harmonic analysis, and are characterized as the unique conventions such that the Fourier transform is both unitary on and an algebra homomorphism from to , without renormalizing the Lebesgue measure.

Many other characterizations of the Fourier transform exist. For example, one uses the Stone–von Neumann theorem: the Fourier transform is the unique unitary intertwiner for the symplectic and Euclidean Schrödinger representations of the Heisenberg group.

Background

History

In 1822, Fourier claimed (see ) that any function, whether continuous or discontinuous, can be expanded into a series of sines. That important work was corrected and expanded upon by others to provide the foundation for the various forms of the Fourier transform used since.

Use of complex sinusoids to represent real sinusoids

To simplify the math, it is desirable to write the Fourier series as a sum of complex exponentials (see ). Each complex exponential or ''complex sinusoid'' of frequency can be expressed using Euler's formula as the sum of a cosine wave of frequency for the real component plus a sine wave also of frequency for the imaginary component:

:$\begin e^ &= \cos(2\pi \xi x) + i \sin(2\pi \xi x) \end$

Expressing real sinusoids as complex sinusoids makes it necessary for the Fourier coefficients $c_n$to be complex valued, but has the benefit of compactly representing all necessary information about each frequency. The usual interpretation of this complex number is that $\left\vert c_n \right\vert$ (its magnitude) gives the amplitude and $\arg (c_n)$ (its argument) gives the phase of the complex sinusoid for that coefficient.

These complex exponentials may have negative frequency. For example, both complex sinusoids and complete one cycle per unit of , but the first represents a positive frequency while the second represents a negative frequency. Positive frequency can be understood as rotating counter-clockwise about the complex plane while negative frequency can be understood as rotating clockwise about the complex plane. When complex sinusoids are interpreted as a helix in three-dimensions (with the third dimension being the imaginary component), negating the frequency simply changes the handedness of the helix.

Real sine and cosine waves can be recovered from the complex exponential representation of sinusoids. For example, a corollary to Euler's formula allows expressing cosine and sine waves as either the real or imaginary part of a complex sinusoid or as a weighted sum of two complex sinusoids of opposite frequency:
:$\begin \cos(2\pi \xi x) &= \operatorname \left(e^\right) =\tfrac e^ + \tfrac e^, \\ \sin(2\pi \xi x) &= \operatorname \left(e^\right) =\tfrac e^ - \tfrac e^. \end$

Consequently, a general form of any real sinusoid (with frequency , phase shift , and amplitude ) can be expressed as the sum of two complex sinusoids of opposite frequency ( and -) but equal magnitude () and with the phase shift embedded in both their complex coefficients:
:$\begin A \cos(2\pi \xi x + \theta) &= \tfrac e^ + \tfrac e^ = \tfrac e^ + \tfrac e^ . \end$

Hence, every real sinusoid (and real signal) can be considered to consist of a positive and negative frequency, whose imaginary components cancel but whose real components contribute equally to form the real signal.

To avoid the use of complex numbers and negative frequencies, the sine and cosine transforms together can be used as an equivalent alternative form of the Fourier transform.

Fourier transform for functions that are zero outside an interval

There is a close connection between the definition of Fourier series and the Fourier transform for functions that are zero outside an interval. For such a function, we can calculate its Fourier series on any interval that includes the points where is not zero. The Fourier transform is also defined for such a function. As we increase the length of the interval in which we calculate the Fourier series, then the Fourier series coefficients begin to resemble the Fourier transform and the sum of the Fourier series of begins to resemble the inverse Fourier transform. More precisely, suppose is large enough that the interval contains the interval in which is not zero. Then, the th series coefficient is given by:

:$c_n = \frac \int_^\frac f(x)\, e^ \, dx.$

Comparing this to the definition of the Fourier transform, it follows that:

:$c_n = \frac\hat f\left(\frac\right)$

since is zero outside . Thus, the Fourier coefficients are equal to the values of the Fourier transform sampled on a grid of width , multiplied by the grid width .

Under appropriate conditions, the Fourier series of will equal the function . In other words, can be written:

:$f(x)=\sum_^\infty c_n\, e^ =\sum_^\infty \hat(\xi_n)\ e^\Delta\xi,$

where the last sum is simply the first sum rewritten using the definitions , and .

This second sum is a Riemann sum. By letting it will converge to the integral for the inverse Fourier transform as expressed above. Under suitable conditions, this argument may be made precise..

Fourier transform for periodic functions

The following is a Fourier transform pair (see Dirac_delta_function#Fourier_transform):

:$e^\ \stackrel\ \delta \left(\xi - \xi_0\right)$

It follows that a P-periodic function with convergent Fourier series:
:$f(x) = \sum_^\infty c_n \cdot e^$

has the Fourier transform:

:$\begin \hat(\xi) &= \sum_^\infty c_n \cdot \mathcal \left \\\ &= \sum_^\infty c_n \cdot \delta \left(\xi - \tfrac\right), \end$

which is a Dirac comb function whose ''teeth'' are modulated by the Fourier series coefficients.

Example

The following figures provide a visual illustration how the Fourier transform measures whether a frequency is present in a particular function. The depicted function oscillates at 3  Hz (if measures seconds) and tends quickly to 0. (The second factor in this equation is an envelope function that shapes the continuous sinusoid into a short pulse. Its general form is a Gaussian function). This function was specially chosen to have a real Fourier transform that can be easily plotted. The first image contains its graph. In order to calculate $\hat(3)$ we must integrate . The second image shows the plot of the real and imaginary parts of this function. The real part of the integrand is almost always positive, because when is negative, the real part of is negative as well. Because they oscillate at the same rate, when is positive, so is the real part of . The result is that when you integrate the real part of the integrand you get a relatively large number (in this case ). On the other hand, when you try to measure a frequency that is not present, as in the case when we look at $\hat(5)$, you see that both real and imaginary component of this function vary rapidly between positive and negative values, as plotted in the third image. Therefore, in this case, the integrand oscillates fast enough so that the integral is very small and the value for the Fourier transform for that frequency is nearly zero.

The general situation may be a bit more complicated than this, but this in spirit is how the Fourier transform measures how much of an individual frequency is present in a function .

File:Function ocsillating at 3 hertz.svg, Original function showing oscillation 3 Hz.
File:Onfreq.svg, Real and imaginary parts of integrand for Fourier transform at 3 Hz
File:Offfreq.svg, Real and imaginary parts of integrand for Fourier transform at 5 Hz
File:Fourier transform of oscillating function.svg, Magnitude of Fourier transform, with 3 and 5 Hz labeled.

Properties of the Fourier transform

Here we assume , and are ''integrable functions'': Lebesgue-measurable on the real line satisfying:
$\int_^\infty , f(x), \, dx < \infty.$

We denote the Fourier transforms of these functions as , and respectively.

Basic properties

The Fourier transform has the following basic properties:.

Linearity

: For any complex numbers and , if , then .

Translation / time shifting

: For any real number , if , then .

Modulation / frequency shifting

: For any real number , if , then .

Time scaling

: For a non-zero real number , if , then
: $\hat(\xi)=\frac\hat\left(\frac\right).$
:The case leads to the ''time-reversal'' property, which states: if , then .

Symmetry

When the real and imaginary parts of a complex function are decomposed into their even and odd parts, there are four components, denoted below by the subscripts RE, RO, IE, and IO. And there is a one-to-one mapping between the four components of a complex time function and the four components of its complex frequency transform:

$\begin \mathsf \quad &\ f \quad &= \quad & f_ \quad &+ \quad & f_ \quad &+ \quad i\ & f_ \quad &+ \quad &\underbrace \\ &\Bigg\Updownarrow\mathcal & &\Bigg\Updownarrow\mathcal & &\ \ \Bigg\Updownarrow\mathcal & &\ \ \Bigg\Updownarrow\mathcal & &\ \ \Bigg\Updownarrow\mathcal\\ \mathsf \quad &\hat f \quad &= \quad & \hat f_ \quad &+ \quad &\overbrace \quad &+ \quad i\ & \hat f_ \quad &+ \quad & \hat f_ \end$

From this, various relationships are apparent, for example:
*The transform of a real-valued function () is the even symmetric function . Conversely, an even-symmetric transform implies a real-valued time-domain.
*The transform of an imaginary-valued function () is the odd symmetric function , and the converse is true.
*The transform of an even-symmetric function () is the real-valued function , and the converse is true.
*The transform of an odd-symmetric function () is the imaginary-valued function , and the converse is true.

Conjugation

: If , then
: $\hat(\xi) = \overline.$
: In particular, if is real, then one has the ''reality condition''
: $\hat(-\xi)=\overline,$
: that is, is a Hermitian function. And if is purely imaginary, then
: $\hat(-\xi)=-\hat(\xi).$

Real and imaginary part in time

* If $h(x) = \Re$, then $\hat(\xi) = \frac\left(\hat(\xi) + \overline\right)$.
* If $h(x) = \Im$, then $\hat(\xi) = \frac\left(\hat(\xi) - \overline\right)$.

The zero frequency component

: Substituting in the definition, we obtain
: $\hat(0) = \int_^ f(x)\,dx.$
: That is the same as the integral of over all its domain and is also known as the average value or DC bias of the function.

Invertibility and periodicity

Under suitable conditions on the function $f$, it can be recovered from its Fourier transform $\hat$. Indeed, denoting the Fourier transform operator by $\mathcal$, so $\mathcal f := \hat$, then for suitable functions, applying the Fourier transform twice simply flips the function: $(\mathcal^2 f)(x) = f(-x)$, which can be interpreted as "reversing time". Since reversing time is two-periodic, applying this twice yields $\mathcal^4(f) = f$, so the Fourier transform operator is four-periodic, and similarly the inverse Fourier transform can be obtained by applying the Fourier transform three times: $\mathcal^3(\hat) = f$. In particular the Fourier transform is invertible (under suitable conditions).

More precisely, defining the ''parity operator'' $\mathcal$ such that $(\mathcal f)(x) = f(-x)$, we have:

:$\begin \mathcal^0 &= \mathrm, \\ \mathcal^1 &= \mathcal, \\ \mathcal^2 &= \mathcal, \\ \mathcal^3 &= \mathcal^ = \mathcal \circ \mathcal = \mathcal \circ \mathcal, \\ \mathcal^4 &= \mathrm \end$

These equalities of operators require careful definition of the space of functions in question, defining equality of functions (equality at every point? equality almost everywhere?) and defining equality of operators – that is, defining the topology on the function space and operator space in question. These are not true for all functions, but are true under various conditions, which are the content of the various forms of the Fourier inversion theorem.

This fourfold periodicity of the Fourier transform is similar to a rotation of the plane by 90°, particularly as the two-fold iteration yields a reversal, and in fact this analogy can be made precise. While the Fourier transform can simply be interpreted as switching the time domain and the frequency domain, with the inverse Fourier transform switching them back, more geometrically it can be interpreted as a rotation by 90° in the time–frequency domain (considering time as the -axis and frequency as the -axis), and the Fourier transform can be generalized to the fractional Fourier transform, which involves rotations by other angles. This can be further generalized to linear canonical transformations, which can be visualized as the action of the special linear group on the time–frequency plane, with the preserved symplectic form corresponding to the uncertainty principle, below. This approach is particularly studied in signal processing, under time–frequency analysis.

Units and duality

The frequency variable must have inverse units to the units of the original function's domain (typically named or ). For example, if is measured in seconds, should be in cycles per second. If the scale of time is in units of 2 seconds, then another greek letter typically is used instead to represent angular frequency (where ) in units of radians per second. If using for units of length, then must be in inverse length, e.g., wavenumbers. That is to say, there are two versions of the real line: one which is the range of and measured in units of t, and the other which is the range of and measured in inverse units to the units of . These two distinct versions of the real line cannot be equated with each other. Therefore, the Fourier transform goes from one space of functions to a different space of functions: functions which have a different domain of definition.

In general, must always be taken to be a linear form on the space of its domain, which is to say that the second real line is the dual space of the first real line. See the article on linear algebra for a more formal explanation and for more details. This point of view becomes essential in generalisations of the Fourier transform to general symmetry groups, including the case of Fourier series.

That there is no one preferred way (often, one says "no canonical way") to compare the two versions of the real line which are involved in the Fourier transform—fixing the units on one line does not force the scale of the units on the other line—is the reason for the plethora of rival conventions on the definition of the Fourier transform. The various definitions resulting from different choices of units differ by various constants.

Let $\hat f_1(\xi)$ be the form of the Fourier transform in terms of ordinary frequency .

Because $\xi = \tfrac$, the alternative form $\hat f_3(\omega)$ (which calls the non-unitary form in angular frequency) has no factor in its definition

:$\begin \hat_3(\omega) \ &\stackrel\ \int_^ f(x)\, e^\, dx = \hat_1 \left(\frac\right) \end$

but has a factor of $\tfrac$ in its corresponding inversion formula

:$\begin f(x) &= \frac \int_^ \hat_3(\omega)\, e^\, d\omega . \end$

An alternative form $\hat f_2(\omega)$ (which calls the unitary form in angular frequency) has a factor of $\tfrac$ in its definition

:$\begin \hat_2(\omega)\ &\stackrel\ \frac \int_^ f(x)\, e^\, dx \end$
and also has that same factor of $\tfrac$ in its corresponding inversion formula, producing a symmetrical relationship

:$\begin f(x) &= \frac \int_^ \hat_2(\omega)\, e^\, d\omega . \end$

In other conventions, the Fourier transform has in the exponent instead of , and vice versa for the inversion formula. This convention is common in modern physics and is the default fo
Wolfram Alpha
and does not mean that the frequency has become negative, since there is no canonical definition of positivity for frequency of a complex wave. It simply means that $\hat f(\xi)$ is the amplitude of the wave  $e^$  instead of the wave  $e^$ (the former, with its minus sign, is often seen in the time dependence for Sinusoidal plane-wave solutions of the electromagnetic wave equation, or in the time dependence for quantum wave functions). Many of the identities involving the Fourier transform remain valid in those conventions, provided all terms that explicitly involve have it replaced by . In Electrical engineering the letter is typically used for the imaginary unit instead of because is used for current.

When using dimensionless units, the constant factors might not even be written in the transform definition. For instance, in probability theory, the characteristic function of the probability density function of a random variable of continuous type is defined without a negative sign in the exponential, and since the units of are ignored, there is no 2 either:

:$\phi (\lambda) = \int_^\infty f(x) e^ \,dx.$

(In probability theory, and in mathematical statistics, the use of the Fourier—Stieltjes transform is preferred, because so many random variables are not of continuous type, and do not possess a density function, and one must treat not functions but distributions, i.e., measures which possess "atoms".)

From the higher point of view of group characters, which is much more abstract, all these arbitrary choices disappear, as will be explained in the later section of this article, which treats the notion of the Fourier transform of a function on a locally compact Abelian group.

Uniform continuity and the Riemann–Lebesgue lemma

The Fourier transform may be defined in some cases for non-integrable functions, but the Fourier transforms of integrable functions have several strong properties.

The Fourier transform of any integrable function is uniformly continuous and.
:$\left\, \hat\right\, _\infty \leq \left\, f\right\, _1$

By the ''Riemann–Lebesgue lemma'',.
:$\hat(\xi) \to 0\text, \xi, \to \infty.$

However, $\hat$ need not be integrable. For example, the Fourier transform of the rectangular function, which is integrable, is the sinc function, which is not Lebesgue integrable, because its improper integrals behave analogously to the alternating harmonic series, in converging to a sum without being absolutely convergent.

It is not generally possible to write the ''inverse transform'' as a Lebesgue integral. However, when both and $\hat$ are integrable, the inverse equality

:$f(x) = \int_^\infty \hat f(\xi) e^ \, d\xi$

holds almost everywhere. That is, the Fourier transform is injective on . (But if is continuous, then equality holds for every .)

Plancherel theorem and Parseval's theorem

Let and be integrable, and let and be their Fourier transforms. If ''f''(''x'') and ''g''(''x'') are also square-integrable, then the Parseval formula follows:

: $\langle f, g\rangle_ = \int_^ f(x) \overline \,dx = \int_^\infty \hat(\xi) \overline \,d\xi,$

where the bar denotes complex conjugation.

The Plancherel theorem, which follows from the above, states that

:$\, f\, _ = \int_^\infty \left, f(x) \^2\,dx = \int_^\infty \left, \hat(\xi) \^2\,d\xi.$

Plancherel's theorem makes it possible to extend the Fourier transform, by a continuity argument, to a unitary operator on . On , this extension agrees with original Fourier transform defined on , thus enlarging the domain of the Fourier transform to (and consequently to for ). Plancherel's theorem has the interpretation in the sciences that the Fourier transform preserves the energy of the original quantity. The terminology of these formulas is not quite standardised. Parseval's theorem was proved only for Fourier series, and was first proved by Lyapunov. But Parseval's formula makes sense for the Fourier transform as well, and so even though in the context of the Fourier transform it was proved by Plancherel, it is still often referred to as Parseval's formula, or Parseval's relation, or even Parseval's theorem.

See Pontryagin duality for a general formulation of this concept in the context of locally compact abelian groups.

Poisson summation formula

The Poisson summation formula (PSF) is an equation that relates the Fourier series coefficients of the periodic summation of a function to values of the function's continuous Fourier transform. The Poisson summation formula says that for sufficiently regular functions ,

:$\sum_n \hat f(n) = \sum_n f (n).$

It has a variety of useful forms that are derived from the basic one by application of the Fourier transform's scaling and time-shifting properties. The formula has applications in engineering, physics, and number theory. The frequency-domain dual of the standard Poisson summation formula is also called the discrete-time Fourier transform.

Poisson summation is generally associated with the physics of periodic media, such as heat conduction on a circle. The fundamental solution of the heat equation on a circle is called a theta function. It is used in number theory to prove the transformation properties of theta functions, which turn out to be a type of modular form, and it is connected more generally to the theory of automorphic forms where it appears on one side of the Selberg trace formula.

Differentiation

Suppose is an absolutely continuous differentiable function, and both and its derivative are integrable. Then the Fourier transform of the derivative is given by
:$\widehat(\xi) = \mathcal\left\ = 2\pi i\xi\hat(\xi).$
More generally, the Fourier transformation of the th derivative is given by
:$\widehat(\xi) = \mathcal\left\ = (2\pi i\xi)^n\hat(\xi).$
Analogically, $\mathcal\left\ = \left(\frac\right)^n \frac \hat(\xi).$

By applying the Fourier transform and using these formulas, some ordinary differential equations can be transformed into algebraic equations, which are much easier to solve. These formulas also give rise to the rule of thumb " is smooth if and only if quickly falls to 0 for ." By using the analogous rules for the inverse Fourier transform, one can also say " quickly falls to 0 for if and only if is smooth."

Convolution theorem

The Fourier transform translates between convolution and multiplication of functions. If and are integrable functions with Fourier transforms and respectively, then the Fourier transform of the convolution is given by the product of the Fourier transforms and (under other conventions for the definition of the Fourier transform a constant factor may appear).

This means that if:

:$h(x) = (f*g)(x) = \int_^\infty f(y)g(x - y)\,dy,$

where denotes the convolution operation, then:

:$\hat(\xi) = \hat(\xi)\, \hat(\xi).$

In linear time invariant (LTI) system theory, it is common to interpret as the impulse response of an LTI system with input and output , since substituting the unit impulse for yields . In this case, represents the frequency response of the system.

Conversely, if can be decomposed as the product of two square integrable functions and , then the Fourier transform of is given by the convolution of the respective Fourier transforms and .

Cross-correlation theorem

In an analogous manner, it can be shown that if is the cross-correlation of and :

:$h(x) = (f \star g)(x) = \int_^\infty \overlineg(x + y)\,dy$

then the Fourier transform of is:

:$\hat(\xi) = \overline \, \hat(\xi).$

As a special case, the autocorrelation of function is:

:$h(x) = (f \star f)(x) = \int_^\infty \overlinef(x + y)\,dy$

for which

:$\hat(\xi) = \overline\hat(\xi) = \left, \hat(\xi)\^2.$

Eigenfunctions

The Fourier transform is a linear transform which has eigenfunctions obeying $\mathcal$psi= \lambda \psi, with $\lambda \in \mathbb.$

A set of eigenfunctions is found by noting that the differentiation rules imply that the ordinary differential equation
: \left P\left( \frac\frac \right) + P( x ) \right\psi(x) = C \psi(x)
with $C$ constant and $P(x)$ being an even functionThe operator $P\left( \frac\frac \right)$ is defined by the Taylor series of $P(x)$ which features only even powers $x^n, n=2,4...$ because P(x) is even. remains invariant in form when applying the Fourier transform $\mathcal$ to both sides of the equation. In other words, every solution $\psi(x)$ and its Fourier transform $\hat\psi(\xi)$ obey the same equation. Assuming uniqueness of the solutions, every solution $\psi(x)$ must therefore be an eigenfunction of the Fourier transform.

The simplest example is provided by $P(x)=x^2$ which is equivalent to the Schrödinger equation for the quantum harmonic oscillator. The corresponding solutions provide an important choice of an orthonormal basis for and are given by the "physicist's" Hermite functions. Equivalently one may use

: $\psi_n(x) = \frac e^\mathrm_n\left(2x\sqrt\right),$

where are the "probabilist's" Hermite polynomials, defined as

: $\mathrm_n(x) = (-1)^n e^\left(\frac\right)^n e^.$

Under this convention for the Fourier transform, we have that

: $\hat\psi_n(\xi) = (-i)^n \psi_n(\xi).$

In other words, the Hermite functions form a complete orthonormal system of eigenfunctions for the Fourier transform on . However, this choice of eigenfunctions is not unique. Because of $\mathcal^4 = \mathrm$ there are only four different eigenvalues of the Fourier transform (the fourth roots of unity ±1 and ±) and any linear combination of eigenfunctions with the same eigenvalue gives another eigenfunction. As a consequence of this, it is possible to decompose as a direct sum of four spaces , , , and where the Fourier transform acts on simply by multiplication by .Incidentally, this also proves that, given any even but possibly highly non-linear $P(x)$ in the differential equation stated above, the resulting solutions $\psi(x)$ may be advantageously decomposed into corresponding linear combinations of Hermite functions.

Since the complete set of Hermite functions provides a resolution of the identity they diagonalize the Fourier operator, i.e. the Fourier transform can be represented by such a sum of terms weighted by the above eigenvalues, and these sums can be explicitly summed:
:\mathcal \xi) =\int dx f(x) \sum_ (-i)^n \psi_n(x) \psi_n(\xi) ~.
This approach to define the Fourier transform was first proposed by Norbert Wiener.. Among other properties, Hermite functions decrease exponentially fast in both frequency and time domains, and they are thus used to define a generalization of the Fourier transform, namely the fractional Fourier transform used in time–frequency analysis.. In physics, this transform was introduced by Edward Condon. This change of basis functions becomes possible because the Fourier transform is a unitary transform when using the right conventions. Consequently, under the proper conditions it may be expected to result from a self-adjoint generator $N$ via
:$\mathcal$psi= e^ \psi.

The operator $N$ is the number operator of the quantum harmonic oscillator written as
:$N \equiv \frac(x-\frac)(x+\frac) = \frac(-\frac+x^2-1).$
It can be interpreted as the generator of fractional Fourier transforms for arbitrary values of , and of the conventional continuous Fourier transform $\mathcal$ for the particular value $t=\pi/2,$ with the Mehler kernel implementing the corresponding active transform. The eigenfunctions of $N$ are the Hermite functions $\psi_n(x)$ which are therefore also eigenfunctions of $\mathcal.$

Upon extending the Fourier transform to distributions the Dirac comb is also an eigenfunction of the Fourier transform.

Connection with the Heisenberg group

The Heisenberg group is a certain group of unitary operators on the Hilbert space of square integrable complex valued functions on the real line, generated by the translations and multiplication by , . These operators do not commute, as their (group) commutator is
:$\left(M^_\xi T^_yM_\xi T_yf\right)(x) = e^f(x)$
which is multiplication by the constant (independent of ) (the circle group of unit modulus complex numbers). As an abstract group, the Heisenberg group is the three-dimensional Lie group of triples , with the group law
:$\left(x_1, \xi_1, t_1\right) \cdot \left(x_2, \xi_2, t_2\right) = \left(x_1 + x_2, \xi_1 + \xi_2, t_1 t_2 e^\right).$

Denote the Heisenberg group by . The above procedure describes not only the group structure, but also a standard unitary representation of on a Hilbert space, which we denote by . Define the linear automorphism of by
:$J \begin x \\ \xi \end = \begin -\xi \\ x \end$

so that . This can be extended to a unique automorphism of :
:$j\left(x, \xi, t\right) = \left(-\xi, x, te^\right).$

According to the Stone–von Neumann theorem, the unitary representations and are unitarily equivalent, so there is a unique intertwiner such that
:$\rho \circ j = W \rho W^*.$
This operator is the Fourier transform.

Many of the standard properties of the Fourier transform are immediate consequences of this more general framework. For example, the square of the Fourier transform, , is an intertwiner associated with , and so we have is the reflection of the original function .

Complex domain

The integral for the Fourier transform
: $\hat f (\xi) = \int _^\infty e^ f(t) \, dt$
can be studied for complex values of its argument . Depending on the properties of , this might not converge off the real axis at all, or it might converge to a complex analytic function for all values of , or something in between.

The Paley–Wiener theorem says that is smooth (i.e., -times differentiable for all positive integers ) and compactly supported if and only if is a holomorphic function for which there exists a constant such that for any integer ,
: $\left\vert \xi ^n \hat f(\xi) \right\vert \leq C e^$
for some constant . (In this case, is supported on .) This can be expressed by saying that is an entire function which is rapidly decreasing in (for fixed ) and of exponential growth in (uniformly in ).

(If is not smooth, but only , the statement still holds provided .) The space of such functions of a complex variable is called the Paley—Wiener space. This theorem has been generalised to semisimple Lie groups.

If is supported on the half-line , then is said to be "causal" because the impulse response function of a physically realisable filter must have this property, as no effect can precede its cause. Paley and Wiener showed that then extends to a holomorphic function on the complex lower half-plane which tends to zero as goes to infinity. The converse is false and it is not known how to characterise the Fourier transform of a causal function.

Laplace transform

The Fourier transform is related to the Laplace transform , which is also used for the solution of differential equations and the analysis of filters.

It may happen that a function for which the Fourier integral does not converge on the real axis at all, nevertheless has a complex Fourier transform defined in some region of the complex plane.

For example, if is of exponential growth, i.e.,
: $\vert f(t) \vert < C e^$
for some constants , then.
: $\hat f (i\tau) = \int _^\infty e^ f(t) \, dt,$
convergent for all , is the two-sided Laplace transform of .

The more usual version ("one-sided") of the Laplace transform is
: $F(s) = \int_0^\infty f(t) e^ \, dt.$

If is also causal, and analytical, then: $\hat f(i\tau) = F(-2\pi\tau).$ Thus, extending the Fourier transform to the complex domain means it includes the Laplace transform as a special case in the case of causal functions—but with the change of variable .

From another, perhaps more classical viewpoint, the Laplace transform by its form involves an additional exponential regulating term which lets it converge outside of the imaginary line where the Fourier transform is defined. As such it can converge for at most exponentially divergent series and integrals, whereas the original Fourier decomposition cannot, enabling analysis of systems with divergent or critical elements. Two particular examples from linear signal processing are the construction of allpass filter networks from critical comb and mitigating filters via exact pole-zero cancellation on the unit circle. Such designs are common in audio processing, where highly nonlinear phase response is sought for, as in reverb.

Furthermore, when extended pulselike impulse responses are sought for signal processing work, the easiest way to produce them is to have one circuit which produces a divergent time response, and then to cancel its divergence through a delayed opposite and compensatory response. There, only the delay circuit in-between admits a classical Fourier description, which is critical. Both the circuits to the side are unstable, and do not admit a convergent Fourier decomposition. However, they do admit a Laplace domain description, with identical half-planes of convergence in the complex plane (or in the discrete case, the Z-plane), wherein their effects cancel.

In modern mathematics the Laplace transform is conventionally subsumed under the aegis Fourier methods. Both of them are subsumed by the far more general, and more abstract, idea of harmonic analysis.

Inversion

If is complex analytic for , then

: $\int _^\infty \hat f (\sigma + ia) e^ \, d\sigma = \int _^\infty \hat f (\sigma + ib) e^ \, d\sigma$
by Cauchy's integral theorem. Therefore, the Fourier inversion formula can use integration along different lines, parallel to the real axis.

Theorem: If for , and for some constants , then
: $f(t) = \int_^\infty \hat f(\sigma + i\tau) e^ \, d\sigma,$
for any .

This theorem implies the Mellin inversion formula for the Laplace transformation,
: $f(t) = \frac 1 \int_^ F(s) e^\, ds$
for any , where is the Laplace transform of .

The hypotheses can be weakened, as in the results of Carleman and Hunt, to being , provided that is of bounded variation in a closed neighborhood of (cf. Dirichlet-Dini theorem), the value of at is taken to be the arithmetic mean of the left and right limits, and provided that the integrals are taken in the sense of Cauchy principal values.

versions of these inversion formulas are also available.

Fourier transform on Euclidean space

The Fourier transform can be defined in any arbitrary number of dimensions . As with the one-dimensional case, there are many conventions. For an integrable function , this article takes the definition:

:$\hat(\boldsymbol) = \mathcal(f)(\boldsymbol) = \int_ f(\mathbf) e^ \, d\mathbf$

where and are -dimensional vectors, and is the dot product of the vectors. Alternatively, can be viewed as belonging to the dual vector space $\R^$, in which case the dot product becomes the contraction of and , usually written as .

All of the basic properties listed above hold for the -dimensional Fourier transform, as do Plancherel's and Parseval's theorem. When the function is integrable, the Fourier transform is still uniformly continuous and the Riemann–Lebesgue lemma holds.

Uncertainty principle

Generally speaking, the more concentrated is, the more spread out its Fourier transform must be. In particular, the scaling property of the Fourier transform may be seen as saying: if we squeeze a function in , its Fourier transform stretches out in . It is not possible to arbitrarily concentrate both a function and its Fourier transform.

The trade-off between the compaction of a function and its Fourier transform can be formalized in the form of an uncertainty principle by viewing a function and its Fourier transform as conjugate variables with respect to the symplectic form on the time–frequency domain: from the point of view of the linear canonical transformation, the Fourier transform is rotation by 90° in the time–frequency domain, and preserves the symplectic form.

Suppose is an integrable and square-integrable function. Without loss of generality, assume that is normalized:

:$\int_^\infty , f(x), ^2 \,dx=1.$

It follows from the Plancherel theorem that is also normalized.

The spread around may be measured by the ''dispersion about zero'' defined by

:$D_0(f)=\int_^\infty x^2, f(x), ^2\,dx.$

In probability terms, this is the second moment of about zero.

The uncertainty principle states that, if is absolutely continuous and the functions and are square integrable, then

:$D_0(f)D_0\left(\hat\right) \geq \frac$.

The equality is attained only in the case

:$\begin f(x) &= C_1 \, e^\\ \therefore \hat(\xi) &= \sigma C_1 \, e^ \end$

where is arbitrary and so that is -normalized. In other words, where is a (normalized) Gaussian function with variance , centered at zero, and its Fourier transform is a Gaussian function with variance .

In fact, this inequality implies that:

: $\left(\int_^\infty (x-x_0)^2, f(x), ^2\,dx\right)\left(\int_^\infty(\xi-\xi_0)^2\left, \hat(\xi)\^2\,d\xi\right)\geq \frac$

for any , .

In quantum mechanics, the momentum and position wave functions are Fourier transform pairs, to within a factor of Planck's constant. With this constant properly taken into account, the inequality above becomes the statement of the Heisenberg uncertainty principle.

A stronger uncertainty principle is the Hirschman uncertainty principle, which is expressed as:

:$H\left(\left, f\^2\right)+H\left(\left, \hat\^2\right)\ge \log\left(\frac\right)$

where is the differential entropy of the probability density function :

:$H(p) = -\int_^\infty p(x)\log\bigl(p(x)\bigr) \, dx$

where the logarithms may be in any base that is consistent. The equality is attained for a Gaussian, as in the previous case.

Sine and cosine transforms

Fourier's original formulation of the transform did not use complex numbers, but rather sines and cosines. Statisticians and others still use this form. An absolutely integrable function for which Fourier inversion holds can be expanded in terms of genuine frequencies (avoiding negative frequencies, which are sometimes considered hard to interpret physically) by

:$f(t) = \int_0^\infty \bigl( a(\lambda ) \cos( 2\pi \lambda t) + b(\lambda ) \sin( 2\pi \lambda t)\bigr) \, d\lambda.$

This is called an expansion as a trigonometric integral, or a Fourier integral expansion. The coefficient functions and can be found by using variants of the Fourier cosine transform and the Fourier sine transform (the normalisations are, again, not standardised):

:$a (\lambda) = 2\int_^\infty f(t) \cos(2\pi\lambda t) \, dt$

and

:$b (\lambda) = 2\int_^\infty f(t) \sin(2\pi\lambda t) \, dt.$

Older literature refers to the two transform functions, the Fourier cosine transform, , and the Fourier sine transform, .

The function can be recovered from the sine and cosine transform using

:$f(t) = 2\int_0 ^ \int_^ f(\tau) \cos\bigl( 2\pi \lambda(\tau-t)\bigr) \, d\tau \, d\lambda.$

together with trigonometric identities. This is referred to as Fourier's integral formula.

Spherical harmonics

Let the set of homogeneous harmonic polynomials of degree on be denoted by . The set consists of the solid spherical harmonics of degree . The solid spherical harmonics play a similar role in higher dimensions to the Hermite polynomials in dimension one. Specifically, if for some in , then . Let the set be the closure in of linear combinations of functions of the form where is in . The space is then a direct sum of the spaces and the Fourier transform maps each space to itself and is possible to characterize the action of the Fourier transform on each space .

Let (with in ), then

:$\hat(\xi)=F_0(, \xi, )P(\xi)$

where

:$F_0(r) = 2\pi i^r^ \int_0^\infty f_0(s)J_\frac(2\pi rs)s^\frac\,ds.$

Here denotes the Bessel function of the first kind with order . When this gives a useful formula for the Fourier transform of a radial function. This is essentially the Hankel transform. Moreover, there is a simple recursion relating the cases and allowing to compute, e.g., the three-dimensional Fourier transform of a radial function from the one-dimensional one.

Restriction problems

In higher dimensions it becomes interesting to study ''restriction problems'' for the Fourier transform. The Fourier transform of an integrable function is continuous and the restriction of this function to any set is defined. But for a square-integrable function the Fourier transform could be a general ''class'' of square integrable functions. As such, the restriction of the Fourier transform of an function cannot be defined on sets of measure 0. It is still an active area of study to understand restriction problems in for . Surprisingly, it is possible in some cases to define the restriction of a Fourier transform to a set , provided has non-zero curvature. The case when is the unit sphere in is of particular interest. In this case the Tomas–Stein restriction theorem states that the restriction of the Fourier transform to the unit sphere in is a bounded operator on provided .

One notable difference between the Fourier transform in 1 dimension versus higher dimensions concerns the partial sum operator. Consider an increasing collection of measurable sets indexed by : such as balls of radius centered at the origin, or cubes of side . For a given integrable function , consider the function defined by:

:$f_R(x) = \int_\hat(\xi) e^\, d\xi, \quad x \in \mathbb^n.$

Suppose in addition that . For and , if one takes , then converges to in as tends to infinity, by the boundedness of the Hilbert transform. Naively one may hope the same holds true for . In the case that is taken to be a cube with side length , then convergence still holds. Another natural candidate is the Euclidean ball . In order for this partial sum operator to converge, it is necessary that the multiplier for the unit ball be bounded in . For it is a celebrated theorem of Charles Fefferman that the multiplier for the unit ball is never bounded unless . In fact, when , this shows that not only may fail to converge to in , but for some functions , is not even an element of .

Fourier transform on function spaces

On spaces

On

The definition of the Fourier transform by the integral formula

:$\hat(\xi) = \int_ f(x)e^\,dx$

is valid for Lebesgue integrable functions ; that is, .

The Fourier transform is a bounded operator. This follows from the observation that

:$\left\vert\hat(\xi)\right\vert \leq \int_ \vert f(x)\vert \,dx,$

which shows that its operator norm is bounded by 1. Indeed, it equals 1, which can be seen, for example, from the transform of the rect function. The image of is a subset of the space of continuous functions that tend to zero at infinity (the Riemann–Lebesgue lemma), although it is not the entire space. Indeed, there is no simple characterization of the image.

On

Since compactly supported smooth functions are integrable and dense in , the Plancherel theorem allows us to extend the definition of the Fourier transform to general functions in by continuity arguments. The Fourier transform in is no longer given by an ordinary Lebesgue integral, although it can be computed by an improper integral, here meaning that for an function ,

:$\hat(\xi) = \lim_\int_ f(x) e^\,dx$

where the limit is taken in the sense. (More generally, you can take a sequence of functions that are in the intersection of and and that converges to in the -norm, and define the Fourier transform of as the -limit of the Fourier transforms of these functions.)

Many of the properties of the Fourier transform in carry over to , by a suitable limiting argument.

Furthermore, is a unitary operator. For an operator to be unitary it is sufficient to show that it is bijective and preserves the inner product, so in this case these follow from the Fourier inversion theorem combined with the fact that for any we have

: $\int_ f(x)\mathcalg(x)\,dx = \int_ \mathcalf(x)g(x)\,dx.$

In particular, the image of is itself under the Fourier transform.

On other

The definition of the Fourier transform can be extended to functions in for by decomposing such functions into a fat tail part in plus a fat body part in . In each of these spaces, the Fourier transform of a function in is in , where is the Hölder conjugate of (by the Hausdorff–Young inequality). However, except for , the image is not easily characterized. Further extensions become more technical. The Fourier transform of functions in for the range requires the study of distributions. In fact, it can be shown that there are functions in with so that the Fourier transform is not defined as a function.

Tempered distributions

One might consider enlarging the domain of the Fourier transform from by considering generalized functions, or distributions. A distribution on is a continuous linear functional on the space of compactly supported smooth functions, equipped with a suitable topology. The strategy is then to consider the action of the Fourier transform on and pass to distributions by duality. The obstruction to doing this is that the Fourier transform does not map to . In fact the Fourier transform of an element in can not vanish on an open set; see the above discussion on the uncertainty principle. The right space here is the slightly larger space of Schwartz functions. The Fourier transform is an automorphism on the Schwartz space, as a topological vector space, and thus induces an automorphism on its dual, the space of tempered distributions. The tempered distributions include all the integrable functions mentioned above, as well as well-behaved functions of polynomial growth and distributions of compact support.

For the definition of the Fourier transform of a tempered distribution, let and be integrable functions, and let and be their Fourier transforms respectively. Then the Fourier transform obeys the following multiplication formula,

:$\int_\hat(x)g(x)\,dx=\int_f(x)\hat(x)\,dx.$

Every integrable function defines (induces) a distribution by the relation

:$T_f(\varphi)=\int_f(x)\varphi(x)\,dx$

for all Schwartz functions . So it makes sense to define Fourier transform of by

:$\hat_f (\varphi)= T_f\left(\hat\right)$

for all Schwartz functions . Extending this to all tempered distributions gives the general definition of the Fourier transform.

Distributions can be differentiated and the above-mentioned compatibility of the Fourier transform with differentiation and convolution remains true for tempered distributions.

Generalizations

Fourier–Stieltjes transform

The Fourier transform of a finite Borel measure on is given by:

:$\hat\mu(\xi)=\int_ e^\,d\mu.$

This transform continues to enjoy many of the properties of the Fourier transform of integrable functions. One notable difference is that the Riemann–Lebesgue lemma fails for measures. In the case that , then the formula above reduces to the usual definition for the Fourier transform of . In the case that is the probability distribution associated to a random variable , the Fourier–Stieltjes transform is closely related to the characteristic function, but the typical conventions in probability theory take instead of . In the case when the distribution has a probability density function this definition reduces to the Fourier transform applied to the probability density function, again with a different choice of constants.

The Fourier transform may be used to give a characterization of measures. Bochner's theorem characterizes which functions may arise as the Fourier–Stieltjes transform of a positive measure on the circle.

Furthermore, the Dirac delta function, although not a function, is a finite Borel measure. Its Fourier transform is a constant function (whose specific value depends upon the form of the Fourier transform used).

Kaniadakis κ-Fourier transform

The Kaniadakis κ-Fourier transform is a κ-deformation of the Fourier transform, associated with the Kaniadakis statistics, which is defined as:

:$_\kappa$(x)\omega)=\int\limits_\limits^f(x)\,
\,d x

where $z_=\frac\, \,(\kappa\,z)$ is a κ-number and $0 \leq , \kappa, < 1$ is the entropic index linked with the Kaniadakis entropy.

The κ-Fourier transform is based on the κ-Fourier series, in which the classical Fourier series and Fourier transform are particular case in the $\kappa \rightarrow 0$ limiting case. This transform imposes an asymptotically log-periodic behavior (or κ-deformed phase by deforminh $\omega$) and a damping factor following a wavelet-like behavior ($\sqrt$).

Locally compact abelian groups

The Fourier transform may be generalized to any locally compact abelian group. A locally compact abelian group is an abelian group that is at the same time a locally compact Hausdorff topological space so that the group operation is continuous. If is a locally compact abelian group, it has a translation invariant measure , called Haar measure. For a locally compact abelian group , the set of irreducible, i.e. one-dimensional, unitary representations are called its characters. With its natural group structure and the topology of pointwise convergence, the set of characters is itself a locally compact abelian group, called the ''Pontryagin dual'' of . For a function in , its Fourier transform is defined by

:$\hat(\xi)=\int_G \xi(x)f(x)\,d\mu\qquad\text\xi\in\hat G.$

The Riemann–Lebesgue lemma holds in this case; is a function vanishing at infinity on .

The Fourier transform on =R/Z is an example; here is a locally compact abelian group, and the Haar measure on can be thought of as the Lebesgue measure on [0,1). Consider the representation of on the complex plane that is a 1-dimensional complex vector space. There are a group of representations (which are irreducible since is 1-dim) $\$ where $e_(x)=e^$ for $x\in T$.

The character of such representation, that is the trace of $e_(x)$ for each $x\in T$ and $k\in Z$, is $e^$ itself. In the case of representation of finite group, the character table of the group are rows of vectors such that each row is the character of one irreducible representation of , and these vectors form an orthonormal basis of the space of class functions that map from to by Schur's lemma. Now the group is no longer finite but still compact, and it preserves the orthonormality of character table. Each row of the table is the function $e_(x)$ of $x\in T,$ and the inner product between two class functions (all functions being class functions since is abelian) $f,g \in L^(T, d\mu)$ is defined as $\langle f,g\rangle=\frac\int_f(y)\overline(y)d\mu(y)$ with the normalizing factor $, T, =1$. The sequence $\$ is an orthonormal basis of the space of class functions $L^(T,d\mu)$.

For any representation of a finite group , $\chi_$ can be expressed as the span $\sum_ \left\langle \chi_,\chi_ \right\rangle \chi_$ ($V_$ are the irreps of ), such that $\left\langle \chi_,\chi_ \right\rangle = \frac\sum_\chi_(g)\overline_(g)$. Similarly for $G=T$ and $f\in L^(T,d\mu)$, $f(x)=\sum_\hat(k)e_$. The Pontriagin dual $\hat$ is $\(k\in Z)$ and for $f\in L^(T,d\mu)$, $\hat(k)=\frac\int_f(y)e^dy$ is its Fourier transform for $e_\in \hat$.

Gelfand transform

The Fourier transform is also a special case of Gelfand transform. In this particular context, it is closely related to the Pontryagin duality map defined above.

Given an abelian locally compact space, locally compact Hausdorff topological group , as before we consider space , defined using a Haar measure. With convolution as multiplication, is an abelian Banach algebra. It also has an involution * given by

:$f^*(g) = \overline.$

Taking the completion with respect to the largest possibly -norm gives its enveloping -algebra, called the group -algebra of . (Any -norm on is bounded by the norm, therefore their supremum exists.)

Given any abelian -algebra , the Gelfand transform gives an isomorphism between and , where is the multiplicative linear functionals, i.e. one-dimensional representations, on with the weak-* topology. The map is simply given by

:$a \mapsto \bigl( \varphi \mapsto \varphi(a) \bigr)$

It turns out that the multiplicative linear functionals of , after suitable identification, are exactly the characters of , and the Gelfand transform, when restricted to the dense subset is the Fourier–Pontryagin transform.

Compact non-abelian groups

The Fourier transform can also be defined for functions on a non-abelian group, provided that the group is compact. Removing the assumption that the underlying group is abelian, irreducible unitary representations need not always be one-dimensional. This means the Fourier transform on a non-abelian group takes values as Hilbert space operators. The Fourier transform on compact groups is a major tool in representation theory and non-commutative harmonic analysis.

Let be a compact Hausdorff topological group. Let denote the collection of all isomorphism classes of finite-dimensional irreducible unitary representations, along with a definite choice of representation on the Hilbert space of finite dimension for each . If is a finite Borel measure on , then the Fourier–Stieltjes transform of is the operator on defined by

:$\left\langle \hat\xi,\eta\right\rangle_ = \int_G \left\langle \overline^_g\xi,\eta\right\rangle\,d\mu(g)$

where is the complex-conjugate representation of acting on . If is absolutely continuous with respect to the left-invariant probability measure on , represented as

:$d\mu = f \, d\lambda$

for some , one identifies the Fourier transform of with the Fourier–Stieltjes transform of .

The mapping
:$\mu\mapsto\hat$
defines an isomorphism between the Banach space of finite Borel measures (see rca space) and a closed subspace of the Banach space consisting of all sequences indexed by of (bounded) linear operators for which the norm

:$\, E\, = \sup_\left\, E_\sigma\right\,$

is finite. The "convolution theorem" asserts that, furthermore, this isomorphism of Banach spaces is in fact an isometric isomorphism of C*-algebras into a subspace of . Multiplication on is given by convolution of measures and the involution * defined by

:$f^*(g) = \overline,$

and has a natural -algebra structure as Hilbert space operators.

The Peter–Weyl theorem holds, and a version of the Fourier inversion formula (Plancherel's theorem) follows: if , then

:$f(g) = \sum_ d_\sigma \operatorname\left(\hat(\sigma)U^_g\right)$

where the summation is understood as convergent in the sense.

The generalization of the Fourier transform to the noncommutative situation has also in part contributed to the development of noncommutative geometry. In this context, a categorical generalization of the Fourier transform to noncommutative groups is Tannaka–Krein duality, which replaces the group of characters with the category of representations. However, this loses the connection with harmonic functions.

Alternatives

In signal processing terms, a function (of time) is a representation of a signal with perfect ''time resolution'', but no frequency information, while the Fourier transform has perfect ''frequency resolution'', but no time information: the magnitude of the Fourier transform at a point is how much frequency content there is, but location is only given by phase (argument of the Fourier transform at a point), and standing waves are not localized in time – a sine wave continues out to infinity, without decaying. This limits the usefulness of the Fourier transform for analyzing signals that are localized in time, notably transients, or any signal of finite extent.

As alternatives to the Fourier transform, in time–frequency analysis, one uses time–frequency transforms or time–frequency distributions to represent signals in a form that has some time information and some frequency information – by the uncertainty principle, there is a trade-off between these. These can be generalizations of the Fourier transform, such as the short-time Fourier transform or fractional Fourier transform, or other functions to represent signals, as in wavelet transforms and chirplet transforms, with the wavelet analog of the (continuous) Fourier transform being the continuous wavelet transform.

Applications

Linear operations performed in one domain (time or frequency) have corresponding operations in the other domain, which are sometimes easier to perform. The operation of differentiation in the time domain corresponds to multiplication by the frequency,Up to an imaginary constant factor whose magnitude depends on what Fourier transform convention is used. so some differential equations are easier to analyze in the frequency domain. Also, convolution in the time domain corresponds to ordinary multiplication in the frequency domain (see Convolution theorem). After performing the desired operations, transformation of the result can be made back to the time domain. Harmonic analysis is the systematic study of the relationship between the frequency and time domains, including the kinds of functions or operations that are "simpler" in one or the other, and has deep connections to many areas of modern mathematics.

Analysis of differential equations

Perhaps the most important use of the Fourier transformation is to solve partial differential equations.
Many of the equations of the mathematical physics of the nineteenth century can be treated this way. Fourier studied the heat equation, which in one dimension and in dimensionless units is

:$\frac =\frac.$

The example we will give, a slightly more difficult one, is the wave equation in one dimension,

:$\frac=\frac.$

As usual, the problem is not to find a solution: there are infinitely many. The problem is that of the so-called "boundary problem": find a solution which satisfies the "boundary conditions"

:$y(x,0) = f(x) , \qquad \frac= g(x).$

Here, and are given functions. For the heat equation, only one boundary condition can be required (usually the first one). But for the wave equation, there are still infinitely many solutions which satisfy the first boundary condition. But when one imposes both conditions, there is only one possible solution.

It is easier to find the Fourier transform of the solution than to find the solution directly. This is because the Fourier transformation takes differentiation into multiplication by the Fourier-dual variable, and so a partial differential equation applied to the original function is transformed into multiplication by polynomial functions of the dual variables applied to the transformed function. After is determined, we can apply the inverse Fourier transformation to find .

Fourier's method is as follows. First, note that any function of the forms

:$\cos\bigl(2\pi\xi(x\pm t)\bigr) \mbox \sin\bigl(2\pi\xi(x \pm t)\bigr)$

satisfies the wave equation. These are called the elementary solutions.

Second, note that therefore any integral
\begin
y(x,t) &= \int_^ d\xi & a_+(\xi)\cos\bigl(2\pi\xi(x +t)\bigr) + a_-(\xi)\cos\bigl(2\pi\xi(x -t)\bigr)+ \\
& & b_+(\xi)\sin\bigl(2\pi\xi(x +t)\bigr) + b_-(\xi)\sin\left(2\pi\xi(x -t)\right)
\end

satisfies the wave equation for arbitrary . This integral may be interpreted as a continuous linear combination of solutions for the linear equation.

Now this resembles the formula for the Fourier synthesis of a function. In fact, this is the real inverse Fourier transform of and in the variable .

The third step is to examine how to find the specific unknown coefficient functions and that will lead to satisfying the boundary conditions. We are interested in the values of these solutions at . So we will set . Assuming that the conditions needed for Fourier inversion are satisfied, we can then find the Fourier sine and cosine transforms (in the variable ) of both sides and obtain

:$2\int_^\infty y(x,0) \cos(2\pi\xi x) \, dx = a_++a_-$

and

:$2\int_^\infty y(x,0) \sin(2\pi\xi x) \, dx = b_++b_-.$

Similarly, taking the derivative of with respect to and then applying the Fourier sine and cosine transformations yields

:$2\int_^ \frac \sin (2\pi\xi x) \, dx = (2\pi\xi)\left(-a_++a_-\right)$

and

:$2\int_^\infty \frac \cos (2\pi\xi x) \, dx = (2\pi\xi)\left(b_+-b_-\right).$

These are four linear equations for the four unknowns and , in terms of the Fourier sine and cosine transforms of the boundary conditions, which are easily solved by elementary algebra, provided that these transforms can be found.

In summary, we chose a set of elementary solutions, parametrized by , of which the general solution would be a (continuous) linear combination in the form of an integral over the parameter . But this integral was in the form of a Fourier integral. The next step was to express the boundary conditions in terms of these integrals, and set them equal to the given functions and . But these expressions also took the form of a Fourier integral because of the properties of the Fourier transform of a derivative. The last step was to exploit Fourier inversion by applying the Fourier transformation to both sides, thus obtaining expressions for the coefficient functions and in terms of the given boundary conditions and .

From a higher point of view, Fourier's procedure can be reformulated more conceptually. Since there are two variables, we will use the Fourier transformation in both and rather than operate as Fourier did, who only transformed in the spatial variables. Note that must be considered in the sense of a distribution since is not going to be : as a wave, it will persist through time and thus is not a transient phenomenon. But it will be bounded and so its Fourier transform can be defined as a distribution. The operational properties of the Fourier transformation that are relevant to this equation are that it takes differentiation in to multiplication by and differentiation with respect to to multiplication by where is the frequency. Then the wave equation becomes an algebraic equation in :

:$\xi^2 \hat y (\xi, f) = f^2 \hat y (\xi, f).$

This is equivalent to requiring unless . Right away, this explains why the choice of elementary solutions we made earlier worked so well: obviously will be solutions. Applying Fourier inversion to these delta functions, we obtain the elementary solutions we picked earlier. But from the higher point of view, one does not pick elementary solutions, but rather considers the space of all distributions which are supported on the (degenerate) conic .

We may as well consider the distributions supported on the conic that are given by distributions of one variable on the line plus distributions on the line as follows: if is any test function,

:$\iint \hat y \phi(\xi,f) \, d\xi \, df = \int s_+ \phi(\xi,\xi) \, d\xi + \int s_- \phi(\xi,-\xi) \, d\xi,$

where , and , are distributions of one variable.

Then Fourier inversion gives, for the boundary conditions, something very similar to what we had more concretely above (put , which is clearly of polynomial growth):

:$y(x,0) = \int\bigl\ e^ \, d\xi$

and

:$\frac = \int\bigl\ 2\pi i \xi e^ \, d\xi.$

Now, as before, applying the one-variable Fourier transformation in the variable to these functions of yields two equations in the two unknown distributions (which can be taken to be ordinary functions if the boundary conditions are or ).

From a calculational point of view, the drawback of course is that one must first calculate the Fourier transforms of the boundary conditions, then assemble the solution from these, and then calculate an inverse Fourier transform. Closed form formulas are rare, except when there is some geometric symmetry that can be exploited, and the numerical calculations are difficult because of the oscillatory nature of the integrals, which makes convergence slow and hard to estimate. For practical calculations, other methods are often used.

The twentieth century has seen the extension of these methods to all linear partial differential equations with polynomial coefficients, and by extending the notion of Fourier transformation to include Fourier integral operators, some non-linear equations as well.

Fourier transform spectroscopy

The Fourier transform is also used in nuclear magnetic resonance (NMR) and in other kinds of spectroscopy, e.g. infrared ( FTIR). In NMR an exponentially shaped free induction decay (FID) signal is acquired in the time domain and Fourier-transformed to a Lorentzian line-shape in the frequency domain. The Fourier transform is also used in magnetic resonance imaging (MRI) and mass spectrometry.

Quantum mechanics

The Fourier transform is useful in quantum mechanics in at least two different ways. To begin with, the basic conceptual structure of quantum mechanics postulates the existence of pairs of complementary variables, connected by the Heisenberg uncertainty principle. For example, in one dimension, the spatial variable of, say, a particle, can only be measured by the quantum mechanical "position operator" at the cost of losing information about the momentum of the particle. Therefore, the physical state of the particle can either be described by a function, called "the wave function", of or by a function of but not by a function of both variables. The variable is called the conjugate variable to . In classical mechanics, the physical state of a particle (existing in one dimension, for simplicity of exposition) would be given by assigning definite values to both and simultaneously. Thus, the set of all possible physical states is the two-dimensional real vector space with a -axis and a -axis called the phase space.

In contrast, quantum mechanics chooses a polarisation of this space in the sense that it picks a subspace of one-half the dimension, for example, the -axis alone, but instead of considering only points, takes the set of all complex-valued "wave functions" on this axis. Nevertheless, choosing the -axis is an equally valid polarisation, yielding a different representation of the set of possible physical states of the particle which is related to the first representation by the Fourier transformation

:$\phi(p) = \int \psi (q) e^\, dq.$

Physically realisable states are , and so by the Plancherel theorem, their Fourier transforms are also . (Note that since is in units of distance and is in units of momentum, the presence of Planck's constant in the exponent makes the exponent dimensionless, as it should be.)

Therefore, the Fourier transform can be used to pass from one way of representing the state of the particle, by a wave function of position, to another way of representing the state of the particle: by a wave function of momentum. Infinitely many different polarisations are possible, and all are equally valid. Being able to transform states from one representation to another by the Fourier transform is not only convenient but also the underlying reason of the Heisenberg uncertainty principle.

The other use of the Fourier transform in both quantum mechanics and quantum field theory is to solve the applicable wave equation. In non-relativistic quantum mechanics, Schrödinger's equation for a time-varying wave function in one-dimension, not subject to external forces, is

:$-\frac \psi(x,t) = i \frac h \frac \psi(x,t).$

This is the same as the heat equation except for the presence of the imaginary unit . Fourier methods can be used to solve this equation.

In the presence of a potential, given by the potential energy function , the equation becomes

:$-\frac \psi(x,t) + V(x)\psi(x,t) = i \frac h \frac \psi(x,t).$

The "elementary solutions", as we referred to them above, are the so-called "stationary states" of the particle, and Fourier's algorithm, as described above, can still be used to solve the boundary value problem of the future evolution of given its values for . Neither of these approaches is of much practical use in quantum mechanics. Boundary value problems and the time-evolution of the wave function is not of much practical interest: it is the stationary states that are most important.

In relativistic quantum mechanics, Schrödinger's equation becomes a wave equation as was usual in classical physics, except that complex-valued waves are considered. A simple example, in the absence of interactions with other particles or fields, is the free one-dimensional Klein–Gordon–Schrödinger–Fock equation, this time in dimensionless units,

:$\left (\frac +1 \right) \psi(x,t) = \frac \psi(x,t).$

This is, from the mathematical point of view, the same as the wave equation of classical physics solved above (but with a complex-valued wave, which makes no difference in the methods). This is of great use in quantum field theory: each separate Fourier component of a wave can be treated as a separate harmonic oscillator and then quantized, a procedure known as "second quantization". Fourier methods have been adapted to also deal with non-trivial interactions.

Finally, the number operator of the quantum harmonic oscillator can be interpreted, for example via the Mehler kernel, as the generator of the Fourier transform $\mathcal$.

Signal processing

The Fourier transform is used for the spectral analysis of time-series. The subject of statistical signal processing does not, however, usually apply the Fourier transformation to the signal itself. Even if a real signal is indeed transient, it has been found in practice advisable to model a signal by a function (or, alternatively, a stochastic process) which is stationary in the sense that its characteristic properties are constant over all time. The Fourier transform of such a function does not exist in the usual sense, and it has been found more useful for the analysis of signals to instead take the Fourier transform of its autocorrelation function.

The autocorrelation function of a function is defined by

:$R_f (\tau) = \lim_ \frac \int_^T f(t) f(t+\tau) \, dt.$

This function is a function of the time-lag elapsing between the values of to be correlated.

For most functions that occur in practice, is a bounded even function of the time-lag and for typical noisy signals it turns out to be uniformly continuous with a maximum at .

The autocorrelation function, more properly called the autocovariance function unless it is normalized in some appropriate fashion, measures the strength of the correlation between the values of separated by a time lag. This is a way of searching for the correlation of with its own past. It is useful even for other statistical tasks besides the analysis of signals. For example, if represents the temperature at time , one expects a strong correlation with the temperature at a time lag of 24 hours.

It possesses a Fourier transform,

:$P_f(\xi) = \int_^\infty R_f (\tau) e^ \, d\tau.$

This Fourier transform is called the power spectral density function of . (Unless all periodic components are first filtered out from , this integral will diverge, but it is easy to filter out such periodicities.)

The power spectrum, as indicated by this density function , measures the amount of variance contributed to the data by the frequency . In electrical signals, the variance is proportional to the average power (energy per unit time), and so the power spectrum describes how much the different frequencies contribute to the average power of the signal. This process is called the spectral analysis of time-series and is analogous to the usual analysis of variance of data that is not a time-series (ANOVA).

Knowledge of which frequencies are "important" in this sense is crucial for the proper design of filters and for the proper evaluation of measuring apparatuses. It can also be useful for the scientific analysis of the phenomena responsible for producing the data.

The power spectrum of a signal can also be approximately measured directly by measuring the average power that remains in a signal after all the frequencies outside a narrow band have been filtered out.

Spectral analysis is carried out for visual signals as well. The power spectrum ignores all phase relations, which is good enough for many purposes, but for video signals other types of spectral analysis must also be employed, still using the Fourier transform as a tool.

Other notations

Other common notations for include:

:$\tilde(\xi),\ F(\xi),\ \mathcal\left(f\right)(\xi),\ \left(\mathcalf\right)(\xi),\ \mathcal(f),\ \mathcal\,\ \mathcal \bigl(f(t)\bigr),\ \mathcal \bigl\.$

Denoting the Fourier transform by a capital letter corresponding to the letter of function being transformed (such as and ) is especially common in the sciences and engineering. In electronics, omega () is often used instead of due to its interpretation as angular frequency, sometimes it is written as , where is the imaginary unit, to indicate its relationship with the Laplace transform, and sometimes it is written informally as in order to use ordinary frequency. In some contexts such as particle physics, the same symbol $f$ may be used for both for a function as well as it Fourier transform, with the two only distinguished by their argument: $f(k_1 + k_2)$ would refer to the Fourier transform because of the momentum argument, while $f(x_0 + \pi \vec r)$ would refer to the original function because of the positional argument. Although tildes may be used as in $\tilde$ to indicate Fourier transforms, tildes may also be used to indicate a modification of a quantity with a more Lorentz invariant form, such as $\tilde = \frac$, so care must be taken. Similarly, $\hat f$ often denotes the Hilbert transform of $f$.

The interpretation of the complex function may be aided by expressing it in polar coordinate form

:$\hat f(\xi) = A(\xi) e^$

in terms of the two real functions and where:

:$A(\xi) = \left, \hat f(\xi)\,$

is the amplitude and

:$\varphi (\xi) = \arg \left( \hat f(\xi) \right),$

is the phase (see arg function).

Then the inverse transform can be written:

:$f(x) = \int _^\infty A(\xi)\ e^\,d\xi,$

which is a recombination of all the frequency components of . Each component is a complex sinusoid of the form whose amplitude is and whose initial phase angle (at ) is .

The Fourier transform may be thought of as a mapping on function spaces. This mapping is here denoted and is used to denote the Fourier transform of the function . This mapping is linear, which means that can also be seen as a linear transformation on the function space and implies that the standard notation in linear algebra of applying a linear transformation to a vector (here the function ) can be used to write instead of . Since the result of applying the Fourier transform is again a function, we can be interested in the value of this function evaluated at the value for its variable, and this is denoted either as or as . Notice that in the former case, it is implicitly understood that is applied first to and then the resulting function is evaluated at , not the other way around.

In mathematics and various applied sciences, it is often necessary to distinguish between a function and the value of when its variable equals , denoted . This means that a notation like formally can be interpreted as the Fourier transform of the values of at . Despite this flaw, the previous notation appears frequently, often when a particular function or a function of a particular variable is to be transformed. For example,

:$\mathcal F\bigl( \operatorname(x) \bigr) = \operatorname(\xi)$

is sometimes used to express that the Fourier transform of a rectangular function is a sinc function, or

:$\mathcal F\bigl(f(x + x_0)\bigr) = \mathcal F\bigl(f(x)\bigr)\, e^$

is used to express the shift property of the Fourier transform.

Notice, that the last example is only correct under the assumption that the transformed function is a function of , not of .

Other conventions

The Fourier transform can also be written in terms of angular frequency:

:$\omega = 2\pi \xi,$

whose units are radians per second.

The substitution into the formulas above produces this convention:

:$\hat(\omega) = \int_^ f(x)\cdot e^\, dx = \hat\left(\tfrac\right).$

Under this convention, the inverse transform becomes:

:$f(x) = \frac \int_^ \hat(\omega)\cdot e^\, d\omega.$

Unlike the convention followed in this article, when the Fourier transform is defined this way, it is no longer a unitary transformation on . There is also less symmetry between the formulas for the Fourier transform and its inverse.

Another convention is to split the factor of evenly between the Fourier transform and its inverse, which leads to definitions:

:$\begin \hat(\omega) &= \frac \int_^ f(x)\cdot e^\, dx = \frac\cdot \hat f\left(\tfrac\right), \\ f(x) &= \frac \int_^ \hat(\omega)\cdot e^\, d\omega. \end$

Under this convention, the Fourier transform is again a unitary transformation on . It also restores the symmetry between the Fourier transform and its inverse.

Variations of all three conventions can be created by conjugating the complex-exponential kernel of both the forward and the reverse transform. The signs must be opposites. Other than that, the choice is (again) a matter of convention.

As discussed above, the characteristic function of a random variable is the same as the Fourier–Stieltjes transform of its distribution measure, but in this context it is typical to take a different convention for the constants. Typically characteristic function is defined
:$E\left(e^\right)=\int e^ \, d\mu_X(x).$

As in the case of the "non-unitary angular frequency" convention above, the factor of 2 appears in neither the normalizing constant nor the exponent. Unlike any of the conventions appearing above, this convention takes the opposite sign in the exponent.

Computation methods

The appropriate computation method largely depends how the original mathematical function is represented and the desired form of the output function.

Since the fundamental definition of a Fourier transform is an integral, functions that can be expressed as closed-form expressions are commonly computed by working the integral analytically to yield a closed-form expression in the Fourier transform conjugate variable as the result. This is the method used to generate tables of Fourier transforms,. including those found in the table below ( Fourier transform#Tables of important Fourier transforms).

Many computer algebra systems such as Matlab and Mathematica that are capable of symbolic integration are capable of computing Fourier transforms analytically. For example, to compute the Fourier transform of one might enter the command into Wolfram Alpha.The direct command would also work for Wolfram Alpha.

Numerical integration of closed-form functions

If the input function is in closed-form and the desired output function is a series of ordered pairs (for example a table of values from which a graph can be generated) over a specified domain, then the Fourier transform can be generated by numerical integration at each value of the Fourier conjugate variable (frequency, for example) for which a value of the output variable is desired. Note that this method requires computing a separate numerical integration for each value of frequency for which a value of the Fourier transform is desired. The numerical integration approach works on a much broader class of functions than the analytic approach, because it yields results for functions that do not have closed form Fourier transform integrals.

Numerical integration of a series of ordered pairs

If the input function is a series of ordered pairs (for example, a time series from measuring an output variable repeatedly over a time interval) then the output function must also be a series of ordered pairs (for example, a complex number vs. frequency over a specified domain of frequencies), unless certain assumptions and approximations are made allowing the output function to be approximated by a closed-form expression. In the general case where the available input series of ordered pairs are assumed be samples representing a continuous function over an interval (amplitude vs. time, for example), the series of ordered pairs representing the desired output function can be obtained by numerical integration of the input data over the available interval at each value of the Fourier conjugate variable (frequency, for example) for which the value of the Fourier transform is desired.

Explicit numerical integration over the ordered pairs can yield the Fourier transform output value for any desired value of the conjugate Fourier transform variable (frequency, for example), so that a spectrum can be produced at any desired step size and over any desired variable range for accurate determination of amplitudes, frequencies, and phases corresponding to isolated peaks. Unlike limitations in DFT and FFT methods, explicit numerical integration can have any desired step size and compute the Fourier transform over any desired range of the conjugate Fourier transform variable (for example, frequency).

Discrete Fourier transforms and fast Fourier transforms

If the ordered pairs representing the original input function are equally spaced in their input variable (for example, equal time steps), then the Fourier transform is known as a discrete Fourier transform (DFT), which can be computed either by explicit numerical integration, by explicit evaluation of the DFT definition, or by fast Fourier transform (FFT) methods. In contrast to explicit integration of input data, use of the DFT and FFT methods produces Fourier transforms described by ordered pairs of step size equal to the reciprocal of the original sampling interval. For example, if the input data is sampled every 10 seconds, the output of DFT and FFT methods will have a 0.1 Hz frequency spacing.

Tables of important Fourier transforms

The following tables record some closed-form Fourier transforms. For functions and denote their Fourier transforms by and . Only the three most common conventions are included. It may be useful to notice that entry 105 gives a relationship between the Fourier transform of a function and the original function, which can be seen as relating the Fourier transform and its inverse.

Functional relationships, one-dimensional

The Fourier transforms in this table may be found in or .

Square-integrable functions, one-dimensional

The Fourier transforms in this table may be found in , , or .

Distributions, one-dimensional

The Fourier transforms in this table may be found in or .
{, class="wikitable"
! !! Function !! Fourier transform
unitary, ordinary frequency !! Fourier transform
unitary, angular frequency !! Fourier transform
non-unitary, angular frequency !! Remarks
, -
,
, $f(x)\,$
, $\begin{align} &\hat{f}(\xi) \triangleq \hat f_1(\xi) \\&= \int_{-\infty}^\infty f(x) e^{-2\pi i x\xi}\, dx \end{align}$
, $\begin{align} &\hat{f}(\omega) \triangleq \hat f_2(\omega) \\&= \frac{1}{\sqrt{2 \pi \int_{-\infty}^\infty f(x) e^{-i \omega x}\, dx \end{align}$
, $\begin{align} &\hat{f}(\omega) \triangleq \hat f_3(\omega) \\&= \int_{-\infty}^\infty f(x) e^{-i \omega x}\, dx \end{align}$
, Definitions
, -
, 301
, $1$
, $\delta(\xi)$
, $\sqrt{2\pi}\, \delta(\omega)$
, $2\pi\delta(\omega)$
, The distribution denotes the Dirac delta function.
, -
, 302
, $\delta(x)\,$
, $1$
, $\frac{1}{\sqrt{2\pi\,$
, $1$
, Dual of rule 301.
, -
, 303
, $e^{i a x}$
, $\delta\left(\xi - \frac{a}{2\pi}\right)$
, $\sqrt{2 \pi}\, \delta(\omega - a)$
, $2 \pi\delta(\omega - a)$
, This follows from 103 and 301.
, -
, 304
, $\cos (a x)$
, $\frac{ \delta\left(\xi - \frac{a}{2\pi}\right)+\delta\left(\xi+\frac{a}{2\pi}\right)}{2}$
, $\sqrt{2 \pi}\,\frac{\delta(\omega-a)+\delta(\omega+a)}{2}$
, $\pi\left(\delta(\omega-a)+\delta(\omega+a)\right)$
, This follows from rules 101 and 303 using Euler's formula:
$\cos(a x) = \frac{e^{i a x} + e^{-i a x{2}.$
, -
, 305
, $\sin( ax)$
, $\frac{\delta\left(\xi-\frac{a}{2\pi}\right)-\delta\left(\xi+\frac{a}{2\pi}\right)}{2i}$
, $\sqrt{2 \pi}\,\frac{\delta(\omega-a)-\delta(\omega+a)}{2i}$
, $-i\pi\bigl(\delta(\omega-a)-\delta(\omega+a)\bigr)$
, This follows from 101 and 303 using
$\sin(a x) = \frac{e^{i a x} - e^{-i a x{2i}.$
, -
, 306
, $\cos \left( a x^2 \right)$
, $\sqrt{\frac{\pi}{a \cos \left( \frac{\pi^2 \xi^2}{a} - \frac{\pi}{4} \right)$
, $\frac{1}{\sqrt{2 a \cos \left( \frac{\omega^2}{4 a} - \frac{\pi}{4} \right)$
, $\sqrt{\frac{\pi}{a \cos \left( \frac{\omega^2}{4a} - \frac{\pi}{4} \right)$
, This follows from 101 and 207 using
$\cos(a x^2) = \frac{e^{i a x^2} + e^{-i a x^2{2}.$
, -
, 307
, $\sin \left( a x^2 \right)$
, $- \sqrt{\frac{\pi}{a \sin \left( \frac{\pi^2 \xi^2}{a} - \frac{\pi}{4} \right)$
, $\frac{-1}{\sqrt{2 a \sin \left( \frac{\omega^2}{4 a} - \frac{\pi}{4} \right)$
, $-\sqrt{\frac{\pi}{a\sin \left( \frac{\omega^2}{4a} - \frac{\pi}{4} \right)$
, This follows from 101 and 207 using
$\sin(a x^2) = \frac{e^{i a x^2} - e^{-i a x^2{2i}.$
, -
, 308
, $x^n\,$
, $\left(\frac{i}{2\pi}\right)^n \delta^{(n)} (\xi)$
, $i^n \sqrt{2\pi} \delta^{(n)} (\omega)$
, $2\pi i^n\delta^{(n)} (\omega)$
, Here, is a natural number and is the th distribution derivative of the Dirac delta function. This rule follows from rules 107 and 301. Combining this rule with 101, we can transform all polynomials.
, -
,
, $\delta^{(n)}(x)$
, $(2\pi i\xi)^n$
, $\frac{(i\omega)^n}{\sqrt{2\pi$
, $(i\omega)^n$
, Dual of rule 308. is the th distribution derivative of the Dirac delta function. This rule follows from 106 and 302.
, -
, 309
, $\frac{1}{x}$
, $-i\pi\sgn(\xi)$
, $-i\sqrt{\frac{\pi}{2\sgn(\omega)$
, $-i\pi\sgn(\omega)$
, Here is the sign function. Note that is not a distribution. It is necessary to use the Cauchy principal value when testing against Schwartz functions. This rule is useful in studying the Hilbert transform.
, -
, 310
, $\begin{align} &\frac{1}{x^n} \\ &:= \frac{(-1)^{n-1{(n-1)!}\frac{d^n}{dx^n}\log , x, \end{align}$
, $-i\pi \frac{(-2\pi i\xi)^{n-1{(n-1)!} \sgn(\xi)$
, $-i\sqrt{\frac{\pi}{2\, \frac{(-i\omega)^{n-1{(n-1)!}\sgn(\omega)$
, $-i\pi \frac{(-i\omega)^{n-1{(n-1)!}\sgn(\omega)$
, is the homogeneous distribution defined by the distributional derivative
$\frac{(-1)^{n-1{(n-1)!}\frac{d^n}{dx^n}\log, x,$
, -
, 311
, $, x, ^\alpha$
, $-\frac{2\sin\left(\frac{\pi\alpha}{2}\right)\Gamma(\alpha+1)}{, 2\pi\xi, ^{\alpha+1$
, $\frac{-2}{\sqrt{2\pi\, \frac{\sin\left(\frac{\pi\alpha}{2}\right)\Gamma(\alpha+1)}{, \omega, ^{\alpha+1$
, $-\frac{2\sin\left(\frac{\pi\alpha}{2}\right)\Gamma(\alpha+1)}{, \omega, ^{\alpha+1$
, This formula is valid for . For some singular terms arise at the origin that can be found by differentiating 318. If , then is a locally integrable function, and so a tempered distribution. The function is a holomorphic function from the right half-plane to the space of tempered distributions. It admits a unique meromorphic extension to a tempered distribution, also denoted for (See homogeneous distribution.)
, -
,
, $\frac{1}{\sqrt{, x}$
, $\frac{1}{\sqrt{, \xi}$
, $\frac{1}{\sqrt{, \omega}$
, $\frac{\sqrt{2\pi{\sqrt{, \omega}$
, Special case of 311.
, -
, 312
, $\sgn(x)$
, $\frac{1}{i\pi \xi}$
, $\sqrt{\frac{2}{\pi \frac{1}{i\omega }$
, $\frac{2}{i\omega }$
, The dual of rule 309. This time the Fourier transforms need to be considered as a Cauchy principal value.
, -
, 313
, $u(x)$
, $\frac{1}{2}\left(\frac{1}{i \pi \xi} + \delta(\xi)\right)$
, $\sqrt{\frac{\pi}{2 \left( \frac{1}{i \pi \omega} + \delta(\omega)\right)$
, $\pi\left( \frac{1}{i \pi \omega} + \delta(\omega)\right)$
, The function is the Heaviside unit step function; this follows from rules 101, 301, and 312.
, -
, 314
, $\sum_{n=-\infty}^{\infty} \delta (x - n T)$
, $\frac{1}{T} \sum_{k=-\infty}^{\infty} \delta \left( \xi -\frac{k }{T}\right)$
, $\frac{\sqrt{2\pi {T}\sum_{k=-\infty}^{\infty} \delta \left( \omega -\frac{2\pi k}{T}\right)$
, $\frac{2\pi}{T}\sum_{k=-\infty}^{\infty} \delta \left( \omega -\frac{2\pi k}{T}\right)$
, This function is known as the Dirac comb function. This result can be derived from 302 and 102, together with the fact that
$\begin{align} & \sum_{n=-\infty}^{\infty} e^{inx} \\ = {}& 2\pi\sum_{k=-\infty}^{\infty} \delta(x+2\pi k) \end{align}$
as distributions.
, -
, 315
, $J_0 (x)$
, $\frac{2\, \operatorname{rect}(\pi\xi)}{\sqrt{1 - 4 \pi^2 \xi^2$
, $\sqrt{\frac{2}{\pi \, \frac{\operatorname{rect}\left( \frac{\omega}{2} \right)}{\sqrt{1 - \omega^2$
, $\frac{2\,\operatorname{rect}\left(\frac{\omega}{2} \right)}{\sqrt{1 - \omega^2$
, The function is the zeroth order Bessel function of first kind.
, -
, 316
, $J_n (x)$
, $\frac{2 (-i)^n T_n (2 \pi \xi) \operatorname{rect}(\pi \xi)}{\sqrt{1 - 4 \pi^2 \xi^2$
, $\sqrt{\frac{2}{\pi \frac{ (-i)^n T_n (\omega) \operatorname{rect} \left( \frac{\omega}{2} \right)}{\sqrt{1 - \omega^2$
, $\frac{2(-i)^n T_n (\omega) \operatorname{rect} \left( \frac{\omega}{2} \right)}{\sqrt{1 - \omega^2$
, This is a generalization of 315. The function is the th order Bessel function of first kind. The function is the Chebyshev polynomial of the first kind.
, -
, 317
, $\log \left, x \$
, $-\frac{1}{2} \frac{1}{\left, \xi \right - \gamma \delta \left( \xi \right)$
, $-\frac{\sqrt\frac{\pi}{2{\left, \omega \right - \sqrt{2 \pi} \gamma \delta \left( \omega \right)$
, $-\frac{\pi}{\left, \omega \right - 2 \pi \gamma \delta \left( \omega \right)$
, is the Euler–Mascheroni constant. It is necessary to use a finite part integral when testing } or }against Schwartz functions. The details of this might change the coefficient of the delta function.
, -
, 318
, $\left( \mp ix \right)^{-\alpha}$
, $\frac{\left(2\pi\right)^\alpha}{\Gamma\left(\alpha\right)}u\left(\pm \xi \right)\left(\pm \xi \right)^{\alpha-1}$
, $\frac{\sqrt{2\pi{\Gamma\left(\alpha\right)}u\left(\pm\omega\right)\left(\pm\omega\right)^{\alpha-1}$
, $\frac{2\pi}{\Gamma\left(\alpha\right)}u\left(\pm\omega\right)\left(\pm\omega\right)^{\alpha-1}$
, This formula is valid for . Use differentiation to derive formula for higher exponents. is the Heaviside function.

Two-dimensional functions

{, class="wikitable"
! !! Function !! Fourier transform
unitary, ordinary frequency !! Fourier transform
unitary, angular frequency !! Fourier transform
non-unitary, angular frequency !! Remarks
, -
, 400
, $f(x,y)$
, $\begin{align}& \hat{f}(\xi_x, \xi_y)\triangleq \\ & \iint f(x,y) e^{-2\pi i(\xi_x x+\xi_y y)}\,dx\,dy \end{align}$
, $\begin{align}& \hat{f}(\omega_x,\omega_y)\triangleq \\ & \frac{1}{2 \pi} \iint f(x,y) e^{-i (\omega_x x +\omega_y y)}\, dx\,dy \end{align}$
, $\begin{align}& \hat{f}(\omega_x,\omega_y)\triangleq \\ & \iint f(x,y) e^{-i(\omega_x x+\omega_y y)}\, dx\,dy \end{align}$
, The variables , , , are real numbers. The integrals are taken over the entire plane.
, -
, 401
, $e^{-\pi\left(a^2x^2+b^2y^2\right)}$
, $\frac{1}{, ab e^{-\pi\left(\frac{\xi_x^2}{a^2} + \frac{\xi_y^2}{b^2}\right)}$
, $\frac{1}{2\pi\,, ab e^{-\frac{1}{4\pi}\left(\frac{\omega_x^2}{a^2} + \frac{\omega_y^2}{b^2}\right)}$
, $\frac{1}{, ab e^{-\frac{1}{4\pi}\left(\frac{\omega_x^2}{a^2} + \frac{\omega_y^2}{b^2}\right)}$
, Both functions are Gaussians, which may not have unit volume.
, -
, 402
, $\operatorname{circ}\left(\sqrt{x^2+y^2}\right)$
, $\frac{J_1\left(2 \pi \sqrt{\xi_x^2+\xi_y^2}\right)}{\sqrt{\xi_x^2+\xi_y^2$
, $\frac{J_1\left(\sqrt{\omega_x^2+\omega_y^2}\right)}{\sqrt{\omega_x^2+\omega_y^2$
, $\frac{2\pi J_1\left(\sqrt{\omega_x^2+\omega_y^2}\right)}{\sqrt{\omega_x^2+\omega_y^2$
, The function is defined by for , and is 0 otherwise. The result is the amplitude distribution of the Airy disk, and is expressed using (the order-1 Bessel function of the first kind).
, -
, 403
, $\frac{1}{\sqrt{x^2+y^2$
, $\frac{1}{\sqrt{\xi_x^2+\xi_y^2$
, $\frac{1}{\sqrt{\omega_x^2+\omega_y^2$
, $\frac{2\pi}{\sqrt{\omega_x^2+\omega_y^2$
, This is the Hankel transform of , a 2-D Fourier "self-transform".
, -
, 404
, $\frac{i}{x+i y}$
, $\frac{1}{\xi_x+i\xi_y}$
, $\frac{1}{\omega_x+i\omega_y}$
, $\frac{2\pi}{\omega_x+i\omega_y}$
,

Formulas for general -dimensional functions

{, class="wikitable"
! !! Function !! Fourier transform
unitary, ordinary frequency !! Fourier transform
unitary, angular frequency !! Fourier transform
non-unitary, angular frequency !! Remarks
, -
, 500
, $f(\mathbf x)\,$
, $\begin{align} &\hat{f}(\boldsymbol \xi) \triangleq \\ &\int_{\mathbb{R}^n}f(\mathbf x) e^{-2\pi i \mathbf x \cdot \boldsymbol \xi }\, d \mathbf x \end{align}$
, $\begin{align} &\hat{f}(\boldsymbol \omega) \triangleq \\ &\frac{1} \int_{\mathbb{R}^n} f(\mathbf x) e^{-i \boldsymbol \omega \cdot \mathbf x}\, d \mathbf x \end{align}$
, $\begin{align} &\hat{f}(\boldsymbol \omega) \triangleq \\ &\int_{\mathbb{R}^n}f(\mathbf x) e^{-i \mathbf x \cdot \boldsymbol \omega }\, d \mathbf x \end{align}$
,
, -
, 501
, \chi_{ ,1(, \mathbf x, )\left(1-, \mathbf x, ^2\right)^\delta
, $\frac{\Gamma(\delta+1)}{\pi^\delta\,, \boldsymbol \xi, ^{\frac{n}{2} + \delta J_{\frac{n}{2}+\delta}(2\pi, \boldsymbol \xi, )$
, $2^\delta \, \frac{\Gamma(\delta+1)}{\left, \boldsymbol \omega\^{\frac{n}{2}+\delta J_{\frac{n}{2}+\delta}(, \boldsymbol \omega, )$
, $\frac{\Gamma(\delta+1)}{\pi^\delta} \left, \frac{\boldsymbol \omega}{2\pi}\^{-\frac{n}{2}-\delta} J_{\frac{n}{2}+\delta}(\!, \boldsymbol \omega, \!)$
, The function is the indicator function of the interval . The function is the gamma function. The function is a Bessel function of the first kind, with order . Taking and produces 402.
, -
, 502
, $, \mathbf x, ^{-\alpha}, \quad 0 < \operatorname{Re} \alpha < n.$
, $\frac{(2\pi)^{\alpha{c_{n, \alpha , \boldsymbol \xi, ^{-(n - \alpha)}$
, $\frac{(2\pi)^{\frac{n}{2}{c_{n, \alpha , \boldsymbol \omega, ^{-(n - \alpha)}$
, $\frac{(2\pi)^{n{c_{n, \alpha , \boldsymbol \omega, ^{-(n - \alpha)}$
, See Riesz potential where the constant is given by
$c_{n, \alpha} = \pi^\frac{n}{2} 2^\alpha \frac{\Gamma\left(\frac{\alpha}{2}\right)}{\Gamma\left(\frac{n - \alpha}{2}\right)}.$
The formula also holds for all by analytic continuation, but then the function and its Fourier transforms need to be understood as suitably regularized tempered distributions. See homogeneous distribution.In , with the non-unitary conventions of this table, the transform of $, \mathbf x, ^\lambda$ is given to be
$2^{\lambda+n}\pi^{\tfrac12 n}\frac{\Gamma\left(\frac{\lambda+n}{2}\right)}{\Gamma\left(-\frac{\lambda}{2}\right)}, \boldsymbol\omega, ^{-\lambda-n}$
from which this follows, with $\lambda=-\alpha$.
, -
, 503
, $\frac{1}{\left, \boldsymbol \sigma\\left(2\pi\right)^\frac{n}{2 e^{-\frac{1}{2} \mathbf x^{\mathrm T} \boldsymbol \sigma^{-\mathrm T} \boldsymbol \sigma^{-1} \mathbf x}$
, $e^{-2\pi^2 \boldsymbol \xi^{\mathrm T} \boldsymbol \sigma \boldsymbol \sigma^{\mathrm T} \boldsymbol \xi}$
, $(2\pi)^{-\frac{n}{2 e^{-\frac{1}{2} \boldsymbol \omega^{\mathrm T} \boldsymbol \sigma \boldsymbol \sigma^{\mathrm T} \boldsymbol \omega}$
, $e^{-\frac{1}{2} \boldsymbol \omega^{\mathrm T} \boldsymbol \sigma \boldsymbol \sigma^{\mathrm T} \boldsymbol \omega}$
, This is the formula for a multivariate normal distribution normalized to 1 with a mean of 0. Bold variables are vectors or matrices. Following the notation of the aforementioned page, and
, -
, 504
, $e^{-2\pi\alpha, \mathbf x$
, $\frac{c_n\alpha}{\left(\alpha^2+, \boldsymbol{\xi}, ^2\right)^\frac{n+1}{2$
, $\frac{c_n (2\pi)^{\frac{n+2}{2 \alpha}{\left(4\pi^2\alpha^2+, \boldsymbol{\omega}, ^2\right)^\frac{n+1}{2$
, $\frac{c_n (2\pi)^{n+1} \alpha}{\left(4\pi^2\alpha^2+, \boldsymbol{\omega}, ^2\right)^\frac{n+1}{2$
, Here.
$c_n=\frac{\Gamma\left(\frac{n+1}{2}\right)}{\pi^\frac{n+1}{2,$

See also

*Analog signal processing
*Beevers–Lipson strip
*Constant-Q transform
*Discrete Fourier transform
**DFT matrix
*Fast Fourier transform
*Fourier integral operator
* Fourier inversion theorem
* Fourier multiplier
*Fourier series
*Fourier sine transform
*Fourier–Deligne transform
*Fourier–Mukai transform
*Fractional Fourier transform
*Indirect Fourier transform
*Integral transform
**Hankel transform
**Hartley transform
*Laplace transform
*Least-squares spectral analysis
*Linear canonical transform
*Mellin transform
*Multidimensional transform
*NGC 4622, especially the image NGC 4622 Fourier transform .
*Nonlocal operator
*Quantum Fourier transform
*Short-time Fourier transform
*Spectral density
**Spectral density estimation
*Symbolic integration
*Time stretch dispersive Fourier transform
*Transform (mathematics)

Notes

Citations

References

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

* (translated from French).

*.

*.

*.

*.

* (translated from Russian).

* (translated from Russian).

*.

*.

*.

*.

*.

*.

*.

*.

* (translated from Russian).

*.

* (translated from Russian).

*.

*; also available a
Fundamentals of Music Processing
Section 2.1, pages 40-56.

*  Also available at https://d1.amobbs.com/bbs_upload782111/files_24/ourdev_523225.pdf.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

*.

External links

*
Encyclopedia of Mathematics
*

{{DEFAULTSORT:Fourier Transform
Fourier analysis
Integral transforms
Unitary operators
Joseph Fourier
Mathematical physics