Fourier Coefficient

A Fourier series () is a summation of harmonically related sinusoidal functions, also known as components or harmonics. The result of the summation is a periodic function whose functional form is determined by the choices of cycle length (or ''period''), the number of components, and their amplitudes and phase parameters. With appropriate choices, one cycle (or ''period'') of the summation can be made to approximate an arbitrary function in that interval (or the entire function if it too is periodic). The number of components is theoretically infinite, in which case the other parameters can be chosen to cause the series to converge to almost any ''well behaved'' periodic function (see Pathological and Dirichlet–Jordan test). The components of a particular function are determined by ''analysis'' techniques described in this article. Sometimes the components are known first, and the unknown function is ''synthesized''

by a Fourier series. Such is the case of a discrete-time Fourier transform.

Convergence of Fourier series means that as more and more components from the series are summed, each successive ''partial Fourier series'' sum will better approximate the function, and will equal the function with a potentially infinite number of components. The mathematical proofs for this may be collectively referred to as the ''Fourier Theorem'' (see ). The figures below illustrate some partial Fourier series results for the components of a square wave.

File:SquareWaveFourierArrows,rotated,nocaption 20fps.gif, A square wave (represented as the blue dot) is approximated by its sixth partial sum (represented as the purple dot), formed by summing the first six terms (represented as arrows) of the square wave's Fourier series. Each arrow starts at the vertical sum of all the arrows to its left (i.e. the previous partial sum).
File:Fourier Series.svg, The first four partial sums of the Fourier series for a square wave. As more harmonics are added, the partial sums ''converge to'' (become more and more like) the square wave.
File:Fourier series and transform.gif, Function $s_6(x)$ (in red) is a Fourier series sum of 6 harmonically related sine waves (in blue). Its Fourier transform $S(f)$ is a frequency-domain representation that reveals the amplitudes of the summed sine waves.

Another analysis technique (not covered here), suitable for both periodic and non-periodic functions, is the Fourier transform, which provides a frequency-continuum of component information. But when applied to a periodic function all components have zero amplitude, except at the harmonic frequencies. The inverse Fourier transform is a synthesis process (like the Fourier series), which converts the component information (often known as the frequency domain representation) back into its time domain representation.

Since Fourier's time, many different approaches to defining and understanding the concept of Fourier series have been discovered, all of which are consistent with one another, but each of which emphasizes different aspects of the topic. Some of the more powerful and elegant approaches are based on mathematical ideas and tools that were not available in Fourier's time. Fourier originally defined the Fourier series for real-valued functions of real arguments, and used the sine and cosine functions as the basis set for the decomposition. Many other Fourier-related transforms have since been defined, extending his initial idea to many applications and birthing an area of mathematics called Fourier analysis.

Analysis process

This section describes the analysis process that derives the parameters of a Fourier series that approximates a known function, $s(x).$  An example of synthesizing an unknown function from known parameters is discrete-time Fourier transform.

Common forms

The Fourier series can be represented in different forms. The ''amplitude-phase'' form, ''sine-cosine'' form, and ''exponential'' form are commonly used and are expressed here for a real-valued function $s(x)$. (See and for alternative forms).

The number of terms summed, $N$, is a potentially infinite integer. Even so, the series might not converge or exactly equate to $s(x)$ at all values of $x$ ( such as a single-point discontinuity) in the analysis interval. For the well-behaved functions typical of physical processes, equality is customarily assumed, and the Dirichlet conditions provide sufficient conditions.

The integer index, $n$, is also the number of cycles the $n^$ harmonic makes in the function's period $P$. Therefore:

* The $n^$ harmonic's wavelength is $\tfrac$ and in units of $x$.
* The $n^$ harmonic's frequency is $\tfrac$ and in reciprocal units of $x$.

Amplitude-phase form

The Fourier series in amplitude- phase form is:

*Its $n^$ harmonic is $A_n \cdot \cos\left(\tfrac n x - \varphi_n\right)$.
*$A_n$ is the $n^$ harmonic's amplitude and $\varphi_n$ is its phase shift.
*The fundamental frequency of $s_(x)$ is the term for when $n$ equals 1, and can be referred to as the $1^$ harmonic.
*$\tfrac$ is sometimes called the $0^$ harmonic or DC component. It is the mean value of $s(x)$.

Clearly can represent functions that are just a sum of one or more of the harmonic frequencies. The remarkable thing, for those not yet familiar with this concept, is that it can also represent the intermediate frequencies and/or non-sinusoidal functions because of the potentially infinite number of terms ($N$).

The coefficients $A_n$ and $\varphi_n$ can be understood and derived in terms of the cross-correlation between $s(x)$ and a sinusoid at frequency $\tfrac$. For a general frequency $f,$ and an analysis interval _0,x_0+P the cross-correlation function:

is essentially a matched filter, with ''template'' $\cos(2\pi f x)$. The maximum of $\Chi_f(\tau)$ is a measure of the amplitude $(A)$ of frequency $f$ in the function $s(x)$, and the value of $\tau$ at the maximum determines the phase $(\varphi)$ of that frequency. Figure 2 is an example, where $s(x)$ is a square wave (not shown), and frequency $f$ is the $4^$ harmonic. It is also an example of deriving the maximum from just two samples, instead of searching the entire function. That is made possible by a trigonometric identity:
Combining this with gives:
\begin
\Chi_n(\varphi) &= \tfrac \int_P s(x) \cdot \cos\left(\tfrac n x-\varphi \right)\, dx
; \quad \varphi \in , 2\pi\
&=\cos(\varphi)\cdot \underbrace_
+\sin(\varphi)\cdot \underbrace_\\
&=\cos(\varphi)\cdot a_n + \sin(\varphi)\cdot b_n
\end

which introduces the definitions of $a_n$ and $b_n$.  And we note for later reference that $a_0$ and $b_0$ can be simplified:

$a_0 = \tfrac \int_P s(x) dx ~ ,\quad b_0 = 0 ~ .$The derivative of $\Chi_n(\varphi)$ is zero at the phase of maximum correlation.$\Chi'_n(\varphi_n)=\sin(\varphi_n)\cdot a_n - \cos(\varphi_n)\cdot b_n = 0 \quad \longrightarrow\quad \tan(\varphi_n) = \frac \quad \longrightarrow\quad \varphi_n = \arctan(b_n, a_n)$And the correlation peak value is:
:$\begin A_n \triangleq \Chi_n(\varphi_n)\ &= \cos(\varphi_n)\cdot a_n + \sin(\varphi_n)\cdot b_n \\ &=\frac\cdot a_n + \frac\cdot b_n =\frac &= \sqrt. \end$

Therefore $a_n$ and $b_n$ are the Cartesian coordinates of a vector with polar coordinates $A_n$ and $\varphi_n.$

Sine-cosine form

Substituting into gives:

: $$

In terms of the readily computed quantities, $a_n$ and $b_n$, recall that:

:$\cos(\varphi_n) = a_n/A_n$
:$\sin(\varphi_n) = b_n/A_n$
:$A_0 = \sqrt = \sqrt = a_0$

Therefore an alternative form of the Fourier series, using the Cartesian coordinates, is the sine-cosine form:

Exponential form

Another applicable identity is Euler's formula:

:
\begin
\cos\left( \tfrac P nx - \varphi_n \right) &\equiv \tfrac e^ + \tfrac e^ \\ pt& = \left(\tfrac e^\right) \cdot e^
+\left(\tfrac e^\right)^* \cdot e^
\end

(Note: the ∗ denotes complex conjugation.)

Therefore, with definitions:
:$c_n \triangleq \left\ = \tfrac \int_P s(x) \cdot e^ \, dx,$

the final result is:

This is the customary form for generalizing to . Negative values of $n$ correspond to negative frequency (explained in ).

Example

Consider a sawtooth function:
:$s(x) = \frac, \quad \mathrm -\pi < x < \pi,$
:$s(x + 2\pi k) = s(x), \quad \mathrm -\pi < x < \pi \text k \in \mathbb.$
In this case, the Fourier coefficients are given by
:\begin
a_n & = \frac\int_^s(x) \cos(nx)\,dx = 0, \quad n \ge 0. \\ ptb_n & = \frac\int_^s(x) \sin(nx)\, dx\\ pt&= -\frac\cos(n\pi) + \frac\sin(n\pi)\\ pt&= \frac, \quad n \ge 1.\end
It can be shown that the Fourier series converges to $s(x)$ at every point $x$ where $s$ is differentiable, and therefore:

When $x=\pi$, the Fourier series converges to 0, which is the half-sum of the left- and right-limit of ''s'' at $x=\pi$. This is a particular instance of the Dirichlet theorem for Fourier series.

This example leads to a solution of the Basel problem.

Convergence

A proof that a Fourier series is a valid representation of any periodic function (that satisfies the Dirichlet conditions) is overviewed in .

In engineering applications, the Fourier series is generally presumed to converge almost everywhere (the exceptions being at discrete discontinuities) since the functions encountered in engineering are better-behaved than the functions that mathematicians can provide as counter-examples to this presumption. In particular, if $s$ is continuous and the derivative of $s(x)$ (which may not exist everywhere) is square integrable, then the Fourier series of $s$ converges absolutely and uniformly to $s(x)$. If a function is square-integrable on the interval _0,x_0+P/math>, then the Fourier series converges to the function at almost every point. It is possible to define Fourier coefficients for more general functions or distributions, in such cases convergence in norm or weak convergence is usually of interest.

Fourier_series_square_wave_circles_animation.gif, link=, Four partial sums (Fourier series) of lengths 1, 2, 3, and 4 terms, showing how the approximation to a square wave improves as the number of terms increases (animation)
Fourier_series_sawtooth_wave_circles_animation.gif, link=, Four partial sums (Fourier series) of lengths 1, 2, 3, and 4 terms, showing how the approximation to a sawtooth wave improves as the number of terms increases (animation)
Example_of_Fourier_Convergence.gif , Example of convergence to a somewhat arbitrary function. Note the development of the "ringing" ( Gibbs phenomenon) at the transitions to/from the vertical sections.

Complex-valued functions

If $s(x)$ is a complex-valued function of a real variable $x,$ both components (real and imaginary part) are real-valued functions that can be represented by a Fourier series. The two sets of coefficients and the partial sum are given by:

:$c_ = \frac\int_P \operatorname\\cdot e^\ dx$ and $c_ = \frac\int_P \operatorname\\cdot e^\ dx$

:$s_(x) = \sum_^N c_\cdot e^ + i\cdot \sum_^N c_\cdot e^ =\sum_^N \left(c_+i\cdot c_\right) \cdot e^.$

Defining $c_n \triangleq c_+i\cdot c_$ yields:

This is identical to except $c_n$ and $c_$ are no longer complex conjugates. The formula for $c_n$ is also unchanged:

:
\begin
c_n &= \tfrac\int_ \operatorname\\cdot e^\ dx + i\cdot \tfrac \int_ \operatorname\\cdot e^\ dx\\ pt&= \tfrac \int_ \left(\operatorname\ +i\cdot \operatorname\\right)\cdot e^\ dx \ = \ \tfrac\int_ s(x)\cdot e^\ dx.
\end

Other common notations

The notation $c_n$ is inadequate for discussing the Fourier coefficients of several different functions. Therefore, it is customarily replaced by a modified form of the function ($s$, in this case), such as \hat /math> or S /math>, and functional notation often replaces subscripting:

:\begin
s_\infty(x) &= \sum_^\infty \hat cdot e^ \\ pt&= \sum_^\infty S cdot e^ && \scriptstyle \mathsf
\end

In engineering, particularly when the variable $x$ represents time, the coefficient sequence is called a frequency domain representation. Square brackets are often used to emphasize that the domain of this function is a discrete set of frequencies.

Another commonly used frequency domain representation uses the Fourier series coefficients to modulate a Dirac comb:
:S(f) \ \triangleq \ \sum_^\infty S cdot \delta \left(f-\frac\right),

where $f$ represents a continuous frequency domain. When variable $x$ has units of seconds, $f$ has units of hertz. The "teeth" of the comb are spaced at multiples (i.e. harmonics) of $\tfrac$, which is called the fundamental frequency. $s_(x)$ can be recovered from this representation by an inverse Fourier transform:

:\begin
\mathcal^\ &= \int_^\infty \left( \sum_^\infty S cdot \delta \left(f-\frac\right)\right) e^\,df, \\ pt&= \sum_^\infty S cdot \int_^\infty \delta\left(f-\frac\right) e^\,df, \\ pt&= \sum_^\infty S cdot e^ \ \ \triangleq \ s_\infty(x).
\end

The constructed function $S(f)$ is therefore commonly referred to as a Fourier transform, even though the Fourier integral of a periodic function is not convergent at the harmonic frequencies.

History

The Fourier series is named in honor of Jean-Baptiste Joseph Fourier (1768–1830), who made important contributions to the study of trigonometric series, after preliminary investigations by Leonhard Euler, Jean le Rond d'Alembert, and Daniel Bernoulli. Fourier introduced the series for the purpose of solving the heat equation in a metal plate, publishing his initial results in his 1807 ''Mémoire sur la propagation de la chaleur dans les corps solides'' (''Treatise on the propagation of heat in solid bodies''), and publishing his ''Théorie analytique de la chaleur'' (''Analytical theory of heat'') in 1822. The ''Mémoire'' introduced Fourier analysis, specifically Fourier series. Through Fourier's research the fact was established that an arbitrary (at first, continuous and later generalized to any piecewise-smooth) function can be represented by a trigonometric series. The first announcement of this great discovery was made by Fourier in 1807, before the French Academy. Early ideas of decomposing a periodic function into the sum of simple oscillating functions date back to the 3rd century BC, when ancient astronomers proposed an empiric model of planetary motions, based on deferents and epicycles.

The heat equation is a partial differential equation. Prior to Fourier's work, no solution to the heat equation was known in the general case, although particular solutions were known if the heat source behaved in a simple way, in particular, if the heat source was a sine or cosine wave. These simple solutions are now sometimes called eigensolutions. Fourier's idea was to model a complicated heat source as a superposition (or linear combination) of simple sine and cosine waves, and to write the solution as a superposition of the corresponding eigensolutions. This superposition or linear combination is called the Fourier series.

From a modern point of view, Fourier's results are somewhat informal, due to the lack of a precise notion of function and integral in the early nineteenth century. Later, Peter Gustav Lejeune Dirichlet and Bernhard Riemann expressed Fourier's results with greater precision and formality.

Although the original motivation was to solve the heat equation, it later became obvious that the same techniques could be applied to a wide array of mathematical and physical problems, and especially those involving linear differential equations with constant coefficients, for which the eigensolutions are sinusoids. The Fourier series has many such applications in electrical engineering, vibration analysis, acoustics, optics, signal processing, image processing, quantum mechanics, econometrics, shell theory, etc.

Beginnings

Joseph Fourier wrote:

This immediately gives any coefficient ''a_k'' of the trigonometrical series for φ(''y'') for any function which has such an expansion. It works because if φ has such an expansion, then (under suitable convergence assumptions) the integral
$\begin a_k&=\int_^1\varphi(y)\cos(2k+1)\frac\,dy \\ &= \int_^1\left(a\cos\frac\cos(2k+1)\frac+a'\cos 3\frac\cos(2k+1)\frac+\cdots\right)\,dy \end$
can be carried out term-by-term. But all terms involving $\cos(2j+1)\frac \cos(2k+1)\frac$ for vanish when integrated from −1 to 1, leaving only the $k^$ term.

In these few lines, which are close to the modern formalism used in Fourier series, Fourier revolutionized both mathematics and physics. Although similar trigonometric series were previously used by Euler, d'Alembert, Daniel Bernoulli and Gauss, Fourier believed that such trigonometric series could represent any arbitrary function. In what sense that is actually true is a somewhat subtle issue and the attempts over many years to clarify this idea have led to important discoveries in the theories of convergence, function spaces, and harmonic analysis.

When Fourier submitted a later competition essay in 1811, the committee (which included Lagrange, Malus and Legendre, among others) concluded: ''...the manner in which the author arrives at these equations is not exempt of difficulties and...his analysis to integrate them still leaves something to be desired on the score of generality and even rigour''.

Fourier's motivation

The Fourier series expansion of the sawtooth function (above) looks more complicated than the simple formula $s(x)=\tfrac$, so it is not immediately apparent why one would need the Fourier series. While there are many applications, Fourier's motivation was in solving the heat equation. For example, consider a metal plate in the shape of a square whose sides measure $\pi$ meters, with coordinates (x,y) \in ,\pi\times ,\pi/math>. If there is no heat source within the plate, and if three of the four sides are held at 0 degrees Celsius, while the fourth side, given by $y=\pi$, is maintained at the temperature gradient $T(x,\pi)=x$ degrees Celsius, for $x$ in $(0,\pi)$, then one can show that the stationary heat distribution (or the heat distribution after a long period of time has elapsed) is given by
: $T(x,y) = 2\sum_^\infty \frac \sin(nx) .$
Here, sinh is the hyperbolic sine function. This solution of the heat equation is obtained by multiplying each term of by $\sinh(ny)/\sinh(n\pi)$. While our example function $s(x)$ seems to have a needlessly complicated Fourier series, the heat distribution $T(x,y)$ is nontrivial. The function $T$ cannot be written as a closed-form expression. This method of solving the heat problem was made possible by Fourier's work.

Complex Fourier series animation

An example of the ability of the complex Fourier series to trace any two dimensional closed figure is shown in the adjacent animation of the complex Fourier series tracing the letter 'e' (for exponential). Note that the animation uses the variable 't' to parameterize the letter 'e' in the complex plane, which is equivalent to using the parameter 'x' in this article's subsection on complex valued functions.

In the animation's back plane, the rotating vectors are aggregated in an order that alternates between a vector rotating in the positive (counter clockwise) direction and a vector rotating at the same frequency but in the negative (clockwise) direction, resulting in a single tracing arm with lots of zigzags. This perspective shows how the addition of each pair of rotating vectors (one rotating in the positive direction and one rotating in the negative direction) nudges the previous trace (shown as a light gray dotted line) closer to the shape of the letter 'e'.

In the animation's front plane, the rotating vectors are aggregated into two sets, the set of all the positive rotating vectors and the set of all the negative rotating vectors (the non-rotating component is evenly split between the two), resulting in two tracing arms rotating in opposite directions. The animation's small circle denotes the midpoint between the two arms and also the midpoint between the origin and the current tracing point denoted by '+'. This perspective shows how the complex Fourier series is an extension (the addition of an arm) of the complex geometric series which has just one arm. It also shows how the two arms coordinate with each other. For example, as the tracing point is rotating in the positive direction, the negative direction arm stays parked. Similarly, when the tracing point is rotating in the negative direction, the positive direction arm stays parked.

In between the animation's back and front planes are rotating trapezoids whose areas represent the values of the complex Fourier series terms. This perspective shows the amplitude, frequency, and phase of the individual terms of the complex Fourier series in relation to the series sum spatially converging to the letter 'e' in the back and front planes. The audio track's left and right channels correspond respectively to the real and imaginary components of the current tracing point '+' but increased in frequency by a factor of 3536 so that the animation's fundamental frequency (n=1) is a 220 Hz tone (A220).

Other applications

The discrete-time Fourier transform is an example of a Fourier series.

Another application is to solve the Basel problem by using Parseval's theorem. The example generalizes and one may compute ζ(2''n''), for any positive integer''n''.

Table of common Fourier series

Some common pairs of periodic functions and their Fourier series coefficients are shown in the table below.

*$s(x)$ designates a periodic function defined on $0 < x \le P$.
*$a_0, a_n, b_n$ designate the Fourier series coefficients (sine-cosine form) of the periodic function $s(x)$.

Table of basic properties

This table shows some mathematical operations in the time domain and the corresponding effect in the Fourier series coefficients. Notation:
* Complex conjugation is denoted by an asterisk.
*$s(x),r(x)$ designate $P$-periodic functions or functions defined only for x \in ,P
* S R /math> designate the Fourier series coefficients (exponential form) of $s$ and $r.$

Symmetry properties

When the real and imaginary parts of a complex function are decomposed into their even and odd parts, there are four components, denoted below by the subscripts RE, RO, IE, and IO. And there is a one-to-one mapping between the four components of a complex time function and the four components of its complex frequency transform:

:$\begin \text & s & = & s_ & + & s_ & + & i s_ & + & \underbrace \\ &\Bigg\Updownarrow\mathcal & &\Bigg\Updownarrow\mathcal & &\ \ \Bigg\Updownarrow\mathcal & &\ \ \Bigg\Updownarrow\mathcal & &\ \ \Bigg\Updownarrow\mathcal\\ \text & S & = & S_\text & + & \overbrace & + & i S_\text & + & S_\text \end$

From this, various relationships are apparent, for example:
*The transform of a real-valued function () is the even symmetric function . Conversely, an even-symmetric transform implies a real-valued time-domain.
*The transform of an imaginary-valued function () is the odd symmetric function , and the converse is true.
*The transform of an even-symmetric function () is the real-valued function , and the converse is true.
*The transform of an odd-symmetric function () is the imaginary-valued function , and the converse is true.

Other properties

Riemann–Lebesgue lemma

If $S$ is integrable, \lim_ S 0, $\lim_ a_n=0$ and $\lim_ b_n=0.$ This result is known as the Riemann–Lebesgue lemma.

Parseval's theorem

If $s$ belongs to $L^2(P)$ (periodic over an interval of length $P$) then: \frac\int_ , s(x), ^2 \, dx = \sum_^\infty \Bigl, S Bigr, ^2

Hesham's identity

If $s$ belongs to $L^4(P)$ (periodic over an interval of length $P$), and S /math> is of a finite-length $M$ then:

for S \in \C, then \frac\int_ , s(x), ^4 \, dx = \sum_^ S \sum_^ S^* \Bigg \underset_S^*[mS[m-(k-l).html"_;"title=".html"_;"title="\underset_S^*[m">\underset_S^*[mS[m-(k-l)">.html"_;"title="\underset_S^*[m">\underset_S^*[mS[m-(k-l)+_\underset_S^*[m-(l-k).html" ;"title="">\underset_S^*[mS[m-(k-l).html" ;"title=".html" ;"title="\underset S^*[m">\underset S^*[mS[m-(k-l)">.html" ;"title="\underset S^*[m">\underset S^*[mS[m-(k-l)+ \underset S^*[m-(l-k)">">\underset_S^*[mS[m-(k-l).html" ;"title=".html" ;"title="\underset S^*[m">\underset S^*[mS[m-(k-l)">.html" ;"title="\underset S^*[m">\underset S^*[mS[m-(k-l)+ \underset S^*[m-(l-k)S \Bigg]

and for S \in \R, then \frac\int_ , s(x), ^4 \, dx = \sum_^ S \sum_^ S \sum_^ S S k-l,

Plancherel's theorem

If $c_0,\, c_,\, c_, \ldots$ are coefficients and $\sum_^\infty , c_n, ^2 < \infty$ then there is a unique function $s\in L^2(P)$ such that S = c_n for every $n$.

Convolution theorems

Given $P$-periodic functions, $s_$ and $r_$ with Fourier series coefficients S /math> and R $n \in \mathbb,$

*The pointwise product: $h_(x) \triangleq s_(x)\cdot r_(x)$ is also $P$-periodic, and its Fourier series coefficients are given by the discrete convolution of the $S$ and $R$ sequences: H = \
*The periodic convolution: $h_(x) \triangleq \int_ s_(\tau)\cdot r_(x-\tau)\, d\tau$ is also $P$-periodic, with Fourier series coefficients: H = P \cdot S cdot R
*A doubly infinite sequence $\left \_$ in $c_0(\mathbb)$ is the sequence of Fourier coefficients of a function in L^1( ,2\pi if and only if it is a convolution of two sequences in $\ell^2(\mathbb)$. See

Derivative property

We say that $s$ belongs to
$C^k(\mathbb)$ if $s$ is a 2-periodic function on $\mathbb$ which is $k$ times differentiable, and its $k^$ derivative is continuous.
* If $s \in C^1(\mathbb)$, then the Fourier coefficients \widehat /math> of the derivative $s'$ can be expressed in terms of the Fourier coefficients \widehat /math> of the function $s$, via the formula \widehat = in \widehat /math>.
* If $s \in C^k(\mathbb)$, then \widehat = (in)^k \widehat /math>. In particular, since for a fixed $k\geq 1$ we have \widehat to 0 as $n\to\infty$, it follows that , n, ^k\widehat /math> tends to zero, which means that the Fourier coefficients converge to zero faster than the ''k''th power of ''n'' for any $k\geq 1$.

Compact groups

One of the interesting properties of the Fourier transform which we have mentioned, is that it carries convolutions to pointwise products. If that is the property which we seek to preserve, one can produce Fourier series on any compact group. Typical examples include those classical groups that are compact. This generalizes the Fourier transform to all spaces of the form ''L''²(''G''), where ''G'' is a compact group, in such a way that the Fourier transform carries convolutions to pointwise products. The Fourier series exists and converges in similar ways to the case.

An alternative extension to compact groups is the Peter–Weyl theorem, which proves results about representations of compact groups analogous to those about finite groups.

Riemannian manifolds

If the domain is not a group, then there is no intrinsically defined convolution. However, if $X$ is a compact Riemannian manifold, it has a Laplace–Beltrami operator. The Laplace–Beltrami operator is the differential operator that corresponds to Laplace operator for the Riemannian manifold $X$. Then, by analogy, one can consider heat equations on $X$. Since Fourier arrived at his basis by attempting to solve the heat equation, the natural generalization is to use the eigensolutions of the Laplace–Beltrami operator as a basis. This generalizes Fourier series to spaces of the type $L^2(X)$, where $X$ is a Riemannian manifold. The Fourier series converges in ways similar to the \pi,\pi/math> case. A typical example is to take $X$ to be the sphere with the usual metric, in which case the Fourier basis consists of spherical harmonics.

Locally compact Abelian groups

The generalization to compact groups discussed above does not generalize to noncompact, nonabelian groups. However, there is a straightforward generalization to Locally Compact Abelian (LCA) groups.

This generalizes the Fourier transform to $L^1(G)$ or $L^2(G)$, where $G$ is an LCA group. If $G$ is compact, one also obtains a Fourier series, which converges similarly to the \pi,\pi/math> case, but if $G$ is noncompact, one obtains instead a Fourier integral. This generalization yields the usual Fourier transform when the underlying locally compact Abelian group is $\mathbb$.

Extensions

Fourier series on a square

We can also define the Fourier series for functions of two variables $x$ and $y$ in the square \pi,\pitimes \pi,\pi/math>:
\begin
f(x,y) & = \sum_ c_e^e^,\\ ptc_ & = \frac \int_^\pi \int_^\pi f(x,y) e^e^\, dx \, dy.
\end

Aside from being useful for solving partial differential equations such as the heat equation, one notable application of Fourier series on the square is in image compression. In particular, the jpeg image compression standard uses the two-dimensional discrete cosine transform, a discrete form of the Fourier cosine transform, which uses only cosine as the basis function.

For two-dimensional arrays with a staggered appearance, half of the Fourier series coefficients disappear, due to additional symmetry.

Fourier series of Bravais-lattice-periodic-function

A three-dimensional Bravais lattice is defined as the set of vectors of the form:
$\mathbf = n_1\mathbf_1 + n_2\mathbf_2 + n_3\mathbf_3$
where $n_i$ are integers and $\mathbf_i$ are three linearly independent vectors. Assuming we have some function, $f(\mathbf)$, such that it obeys the condition of periodicity for any Bravais lattice vector $\mathbf$, $f(\mathbf) = f(\mathbf+\mathbf)$, we could make a Fourier series of it. This kind of function can be, for example, the effective potential that one electron "feels" inside a periodic crystal. It is useful to make the Fourier series of the potential when applying Bloch's theorem. First, we may write any arbitrary position vector $\mathbf$ in the coordinate-system of the lattice:
$\mathbf = x_1\frac+ x_2\frac+ x_3\frac,$
where $a_i \triangleq , \mathbf_i, ,$ meaning that $a_i$ is defined to be the magnitude of $\mathbf_i$, so $\hat = \frac$ is the unit vector directed along $\mathbf_i$.

Thus we can define a new function,
$g(x_1,x_2,x_3) \triangleq f(\mathbf) = f \left (x_1\frac+x_2\frac+x_3\frac \right ).$

This new function, $g(x_1,x_2,x_3)$, is now a function of three-variables, each of which has periodicity $a_1$, $a_2$, and $a_3$ respectively:
$g(x_1,x_2,x_3) = g(x_1+a_1,x_2,x_3) = g(x_1,x_2+a_2,x_3) = g(x_1,x_2,x_3+a_3).$

This enables us to build up a set of Fourier coefficients, each being indexed by three independent integers $m_1,m_2,m_3$. In what follows, we use function notation to denote these coefficients, where previously we used subscripts. If we write a series for $g$ on the interval \left 0, a_1\right /math> for $x_1$, we can define the following:
$h^\mathrm(m_1, x_2, x_3) \triangleq \frac\int_0^ g(x_1, x_2, x_3)\cdot e^\, dx_1$

And then we can write:
$g(x_1, x_2, x_3)=\sum_^\infty h^\mathrm(m_1, x_2, x_3) \cdot e^$

Further defining:
$\begin h^\mathrm(m_1, m_2, x_3) & \triangleq \frac\int_0^ h^\mathrm(m_1, x_2, x_3)\cdot e^\, dx_2 \\$2pt& = \frac\int_0^ dx_2 \frac\int_0^ dx_1 g(x_1, x_2, x_3)\cdot e^
\end

We can write $g$ once again as:
$g(x_1, x_2, x_3)=\sum_^\infty \sum_^\infty h^\mathrm(m_1, m_2, x_3) \cdot e^ \cdot e^$

Finally applying the same for the third coordinate, we define:
$\begin h^\mathrm(m_1, m_2, m_3) & \triangleq \frac\int_0^ h^\mathrm(m_1, m_2, x_3)\cdot e^\, dx_3 \\$2pt& = \frac\int_0^ dx_3 \frac\int_0^ dx_2 \frac\int_0^ dx_1 g(x_1, x_2, x_3)\cdot e^
\end

We write $g$ as:
$g(x_1, x_2, x_3)=\sum_^\infty \sum_^\infty \sum_^\infty h^\mathrm(m_1, m_2, m_3) \cdot e^ \cdot e^\cdot e^$

Re-arranging:
$g(x_1, x_2, x_3)=\sum_ h^\mathrm(m_1, m_2, m_3) \cdot e^.$

Now, every ''reciprocal'' lattice vector can be written (but does not mean that it is the only way of writing) as $\mathbf = m_1\mathbf_1 + m_2\mathbf_2 + m_3\mathbf_3$, where $m_i$ are integers and $\mathbf_i$ are reciprocal lattice vectors to satisfy $\mathbf \cdot \mathbf=2\pi\delta_$ ($\delta_ = 1$ for $i = j$, and $\delta_ = 0$ for $i \neq j$). Then for any arbitrary reciprocal lattice vector $\mathbf$ and arbitrary position vector $\mathbf$ in the original Bravais lattice space, their scalar product is:
$\mathbf \cdot \mathbf = \left ( m_1\mathbf_1 + m_2\mathbf_2 + m_3\mathbf_3 \right ) \cdot \left (x_1\frac+ x_2\frac +x_3\frac \right ) = 2\pi \left( x_1\frac+x_2\frac+x_3\frac \right ).$

So it is clear that in our expansion of $g(x_1,x_2,x_3) = f(\mathbf)$, the sum is actually over reciprocal lattice vectors:
$f(\mathbf)=\sum_ h(\mathbf) \cdot e^,$

where $h(\mathbf) = \frac \int_0^ dx_3 \, \frac\int_0^ dx_2 \, \frac\int_0^ dx_1 \, f\left(x_1\frac + x_2\frac + x_3\frac \right)\cdot e^.$

Assuming
$\mathbf = (x,y,z) = x_1\frac+x_2\frac+x_3\frac,$
we can solve this system of three linear equations for $x$, $y$, and $z$ in terms of $x_1$, $x_2$ and $x_3$ in order to calculate the volume element in the original cartesian coordinate system. Once we have $x$, $y$, and $z$ in terms of $x_1$, $x_2$ and $x_3$, we can calculate the Jacobian determinant:
$\begin \dfrac & \dfrac & \dfrac \\$2pt\dfrac & \dfrac & \dfrac \\2pt\dfrac & \dfrac & \dfrac
\end
which after some calculation and applying some non-trivial cross-product identities can be shown to be equal to:
$\frac$

(it may be advantageous for the sake of simplifying calculations, to work in such a Cartesian coordinate system, in which it just so happens that $\mathbf_1$ is parallel to the ''x'' axis, $\mathbf_2$ lies in the ''xy''-plane, and $\mathbf_3$ has components of all three axes). The denominator is exactly the volume of the primitive unit cell which is enclosed by the three primitive-vectors $\mathbf_1$, $\mathbf_2$ and $\mathbf_3$. In particular, we now know that
$dx_1 \, dx_2 \, dx_3 = \frac \cdot dx \, dy \, dz.$

We can write now $h(\mathbf)$ as an integral with the traditional coordinate system over the volume of the primitive cell, instead of with the $x_1$, $x_2$ and $x_3$ variables:
$h(\mathbf) = \frac\int_ d\mathbf f(\mathbf)\cdot e^$
writing $d\mathbf$ for the volume element $dx \, dy \, dz$; and where $C$ is the primitive unit cell, thus, $\mathbf_1\cdot(\mathbf_2 \times \mathbf_3)$ is the volume of the primitive unit cell.

Hilbert space interpretation

In the language of Hilbert spaces, the set of functions $\left\$ is an orthonormal basis for the space L^2( \pi,\pi of square-integrable functions on \pi,\pi/math>. This space is actually a Hilbert space with an inner product given for any two elements $f$ and $g$ by:
:$\langle f,\, g \rangle \;\triangleq \; \frac\int_^ f(x)g^*(x)\,dx,$ where $g^(x)$ is the complex conjugate of $g(x).$
The basic Fourier series result for Hilbert spaces can be written as
:$f=\sum_^\infty \langle f,e_n \rangle \, e_n.$

This corresponds exactly to the complex exponential formulation given above. The version with sines and cosines is also justified with the Hilbert space interpretation. Indeed, the sines and cosines form an orthogonal set:
$\int_^ \cos(mx)\, \cos(nx)\, dx = \frac\int_^ \cos((n-m)x)+\cos((n+m)x)\, dx = \pi \delta_, \quad m, n \ge 1,$
$\int_^ \sin(mx)\, \sin(nx)\, dx = \frac\int_^ \cos((n-m)x)-\cos((n+m)x)\, dx = \pi \delta_, \quad m, n \ge 1$
(where ''δ''_''mn'' is the Kronecker delta), and
$\int_^ \cos(mx)\, \sin(nx)\, dx = \frac\int_^ \sin((n+m)x)+\sin((n-m)x)\, dx = 0;$
furthermore, the sines and cosines are orthogonal to the constant function $1$. An ''orthonormal basis'' for L^2( \pi,\pi consisting of real functions is formed by the functions $1$ and $\sqrt \cos (nx)$, $\sqrt \sin (nx)$ with ''n''= 1,2,.... The density of their span is a consequence of the Stone–Weierstrass theorem, but follows also from the properties of classical kernels like the Fejér kernel.

Fourier theorem proving convergence of Fourier series

These theorems, and informal variations of them that don't specify the convergence conditions, are sometimes referred to generically as ''Fourier's theorem'' or ''the Fourier theorem''.

The earlier s_(x) = \sum_^N S e^, is a trigonometric polynomial of degree $N$ that can be generally expressed as: p_(x)=\sum_^N p e^.

Least squares property

Parseval's theorem implies that:

Convergence theorems

Because of the least squares property, and because of the completeness of the Fourier basis, we obtain an elementary convergence result.

We have already mentioned that if $s$ is continuously differentiable, then (i\cdot n) S /math> is the $n^$ Fourier coefficient of the derivative $s'$. It follows, essentially from the Cauchy–Schwarz inequality, that $s_$ is absolutely summable. The sum of this series is a continuous function, equal to $s$, since the Fourier series converges in the mean to $s$:

This result can be proven easily if $s$ is further assumed to be $C^2$, since in that case n^2S /math> tends to zero as $n \rightarrow \infty$. More generally, the Fourier series is absolutely summable, thus converges uniformly to $s$, provided that $s$ satisfies a Hölder condition of order $\alpha > 1/2$. In the absolutely summable case, the inequality:
:\sup_x , s(x) - s_(x), \le \sum_ , S

proves uniform convergence.

Many other results concerning the convergence of Fourier series are known, ranging from the moderately simple result that the series converges at $x$ if $s$ is differentiable at $x$, to Lennart Carleson's much more sophisticated result that the Fourier series of an $L^2$ function actually converges almost everywhere.

Divergence

Since Fourier series have such good convergence properties, many are often surprised by some of the negative results. For example, the Fourier series of a continuous ''T''-periodic function need not converge pointwise. The uniform boundedness principle yields a simple non-constructive proof of this fact.

In 1922, Andrey Kolmogorov published an article titled ''Une série de Fourier-Lebesgue divergente presque partout'' in which he gave an example of a Lebesgue-integrable function whose Fourier series diverges almost everywhere. He later constructed an example of an integrable function whose Fourier series diverges everywhere .

See also

* ATS theorem
* Dirichlet kernel
* Discrete Fourier transform
* Fast Fourier transform
* Fejér's theorem
* Fourier analysis
* Fourier sine and cosine series
* Fourier transform
* Gibbs phenomenon
* Half range Fourier series
* Laurent series – the substitution ''q'' = ''e''^''ix'' transforms a Fourier series into a Laurent series, or conversely. This is used in the ''q''-series expansion of the ''j''-invariant.
* Least-squares spectral analysis
* Multidimensional transform
* Spectral theory
* Sturm–Liouville theory
* Residue theorem integrals of ''f''(''z''), singularities, poles

Notes

References

Further reading

*
* 2003 unabridged republication of the 1878 English translation by Alexander Freeman of Fourier's work ''Théorie Analytique de la Chaleur'', originally published in 1822.
*
*
*
*Felix Klein, ''Development of mathematics in the 19th century''. Mathsci Press Brookline, Mass, 1979. Translated by M. Ackerman from ''Vorlesungen über die Entwicklung der Mathematik im 19 Jahrhundert'', Springer, Berlin, 1928.
*
* The first edition was published in 1935.

External links

*
*
*
*

{{DEFAULTSORT:Fourier Series

Joseph Fourier