Automated Manifest System on:  
[Wikipedia]  
[Google]  
[Amazon]
![Control room pt tupper](https://upload.wikimedia.org/wikipedia/commons/b/b6/Control_room_pt_tupper.jpg)
Automation describes a wide range of technologies that reduce human intervention in processes, namely by predetermining decision criteria, subprocess relationships, and related actions, as well as embodying those predeterminations in machines. Automation has been achieved by various means including
mechanical
Mechanical may refer to:
Machine
* Machine (mechanical), a system of mechanisms that shape the actuator input to achieve a specific application of output forces and movement
* Mechanical calculator, a device used to perform the basic operations of ...
,
hydraulic
Hydraulics (from Greek: Υδραυλική) is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids. At a very basic level, hydraulics is the liquid counte ...
,
pneumatic,
electrical
Electricity is the set of physical phenomena associated with the presence and motion of matter that has a property of electric charge. Electricity is related to magnetism, both being part of the phenomenon of electromagnetism, as described ...
,
electronic devices
The field of electronics is a branch of physics and electrical engineering that deals with the emission, behaviour and effects of electrons using electronic devices. Electronics uses active devices to control electron flow by amplification ...
, and
computers, usually in combination. Complicated systems, such as modern factories,
airplane
An airplane or aeroplane (informally plane) is a fixed-wing aircraft that is propelled forward by thrust from a jet engine, Propeller (aircraft), propeller, or rocket engine. Airplanes come in a variety of sizes, shapes, and wing configurat ...
s, and ships typically use combinations of all of these techniques. The benefit of automation includes labor savings, reducing waste, savings in
electricity
Electricity is the set of physical phenomena associated with the presence and motion of matter that has a property of electric charge. Electricity is related to magnetism, both being part of the phenomenon of electromagnetism, as describ ...
costs, savings in material costs, and improvements to quality, accuracy, and precision.
Automation includes the use of various equipment and
control systems such as
machinery, processes in
factories
A factory, manufacturing plant or a production plant is an industrial facility, often a complex consisting of several buildings filled with machinery, where workers manufacture items or operate machines which process each item into another. T ...
,
boiler
A boiler is a closed vessel in which fluid (generally water) is heated. The fluid does not necessarily boil. The heated or vaporized fluid exits the boiler for use in various processes or heating applications, including water heating, centr ...
s, and heat-treating
ovens, switching on
telephone network
A telephone network is a telecommunications network that connects telephones, which allows telephone calls between two or more parties, as well as newer features such as fax and internet. The idea was revolutionized in the 1920s, as more and mor ...
s,
steering
Steering is a system of components, linkages, and other parts that allows a driver to control the direction of the vehicle.
Introduction
The most conventional steering arrangement allows a driver to turn the front wheels of a vehicle using ...
, and stabilization of ships,
aircraft
An aircraft is a vehicle that is able to fly by gaining support from the air. It counters the force of gravity by using either static lift or by using the dynamic lift of an airfoil, or in a few cases the downward thrust from jet engine ...
, and other applications and
vehicle
A vehicle (from la, vehiculum) is a machine that transports people or cargo. Vehicles include wagons, bicycles, motor vehicles (motorcycles, cars, trucks, buses, mobility scooters for disabled people), railed vehicles (trains, trams), ...
s with reduced human intervention. Examples range from a household
thermostat controlling a boiler to a large industrial control system with tens of thousands of input measurements and output control signals. Automation has also found space in the banking sector. In control complexity, it can range from simple on-off control to multi-variable high-level algorithms.
In the simplest type of an automatic
control loop
A control loop is the fundamental building block of industrial control systems. It consists of all the physical components and control functions necessary to automatically adjust the value of a measured process variable (PV) to equal the value of ...
, a controller compares a measured value of a process with a desired set value and processes the resulting error signal to change some input to the process, in such a way that the process stays at its set point despite disturbances. This closed-loop control is an application of negative feedback to a system. The mathematical basis of
control theory
Control theory is a field of mathematics that deals with the control of dynamical systems in engineered processes and machines. The objective is to develop a model or algorithm governing the application of system inputs to drive the system to a ...
was begun in the 18th century and advanced rapidly in the 20th. The term ''automation'', inspired by the earlier word ''automatic'' (coming from ''
automaton
An automaton (; plural: automata or automatons) is a relatively self-operating machine, or control mechanism designed to automatically follow a sequence of operations, or respond to predetermined instructions.Automaton – Definition and More ...
''), was not widely used before 1947, when
Ford
Ford commonly refers to:
* Ford Motor Company, an automobile manufacturer founded by Henry Ford
* Ford (crossing), a shallow crossing on a river
Ford may also refer to:
Ford Motor Company
* Henry Ford, founder of the Ford Motor Company
* Ford F ...
established an automation department.
It was during this time that industry was rapidly adopting
feedback controller
Control theory is a field of mathematics that deals with the control of dynamical systems in engineered processes and machines. The objective is to develop a model or algorithm governing the application of system inputs to drive the system to a ...
s, which were introduced in the 1930s.
The
World Bank
The World Bank is an international financial institution that provides loans and grants to the governments of low- and middle-income countries for the purpose of pursuing capital projects. The World Bank is the collective name for the Inte ...
's
World Development Report
The World Development Report (WDR) is an annual report published since 1978 by the International Bank for Reconstruction and Development (IBRD) or World Bank. Each WDR provides in-depth analysis of a specific aspect of economic development. Past r ...
of 2019 shows evidence that the new industries and jobs in the technology sector outweigh the economic effects of workers being displaced by automation.
Job losses and
downward mobility
Social mobility is the movement of individuals, families, households or other categories of people within or between social strata in a society. It is a change in social status relative to one's current social location within a given society ...
blamed on automation have been cited as one of many factors in the resurgence of
nationalist
Nationalism is an idea and movement that holds that the nation should be congruent with the state. As a movement, nationalism tends to promote the interests of a particular nation (as in a group of people), Smith, Anthony. ''Nationalism: Th ...
,
protectionist
Protectionism, sometimes referred to as trade protectionism, is the economic policy of restricting imports from other countries through methods such as tariffs on imported goods, import quotas, and a variety of other government regulations. ...
and
populist
Populism refers to a range of political stances that emphasize the idea of "the people" and often juxtapose this group against " the elite". It is frequently associated with anti-establishment and anti-political sentiment. The term develop ...
politics in the US, UK and France, among other countries since the 2010s.
Open-loop and closed-loop (feedback) control
Fundamentally, there are two types of control loops:
open-loop control
In control theory, an open-loop controller, also called a non-feedback controller, is a control system in which the control action is independent of the "process output", which is the process variable that is being controlled."Feedback and contr ...
, and
closed-loop control
Control theory is a field of mathematics that deals with the control of dynamical systems in engineered processes and machines. The objective is to develop a model or algorithm governing the application of system inputs to drive the system to a ...
.
In open-loop control, the control action from the controller is independent of the "process output" (or "controlled process variable"). A good example of this is a central heating boiler controlled only by a timer, so that heat is applied for a constant time, regardless of the temperature of the building. (The control action is switching the boiler off and on. The process output is building temperature.)
In closed-loop control, the control action from the controller is dependent on the process output. In the case of the boiler analogy, this would include a temperature sensor to monitor the building temperature, and thereby feed a signal back to the controller to ensure it maintains the building at the temperature set on the
thermostat. A closed-loop controller, therefore, has a feedback loop that ensures the controller exerts a control action to give a process output equal to the "reference input" or "set point". For this reason, closed-loop control is also called feedback control.
The definition of a closed-loop control system according to the British Standard Institution is 'a control system possessing monitoring feedback, the deviation signal formed as a result of this feedback being used to control the action of a final control element in such a way as to tend to reduce the deviation to zero.'
Likewise, a feedback ''
control system'' is a system that tends to maintain a prescribed relationship of one system variable to another by comparing functions of these variables and using the difference as a means of control.
[
The advanced type of automation that revolutionized manufacturing, aircraft, communications, and other industries, is feedback control, which is usually ''continuous'' and involves taking measurements using a sensor and making calculated adjustments to keep the measured variable within a set range. The theoretical basis of closed-loop automation is ]control theory
Control theory is a field of mathematics that deals with the control of dynamical systems in engineered processes and machines. The objective is to develop a model or algorithm governing the application of system inputs to drive the system to a ...
.
Control actions
Discrete control (on/off)
One of the simplest types of control is ''on-off'' control. An example is a thermostat used on household appliances which either open or close an electrical contact. (Thermostats were originally developed as true feedback-control mechanisms rather than the on-off common household appliance thermostat.)
Sequence control, in which a programmed sequence of ''discrete'' operations is performed, often based on system logic that involves system states. An elevator control system is an example of sequence control.
PID controller
A proportional–integral–derivative controller (PID controller) is a control loop
A control loop is the fundamental building block of industrial control systems. It consists of all the physical components and control functions necessary to automatically adjust the value of a measured process variable (PV) to equal the value of ...
feedback mechanism
Feedback occurs when outputs of a system are routed back as inputs as part of a chain of cause-and-effect that forms a circuit or loop. The system can then be said to ''feed back'' into itself. The notion of cause-and-effect has to be handled ...
(controller
Controller may refer to:
Occupations
* Controller or financial controller, or in government accounting comptroller, a senior accounting position
* Controller, someone who performs agent handling in espionage
* Air traffic controller, a person ...
) widely used in industrial control system
An industrial control system (ICS) is an electronic control system and associated instrumentation used for industrial process control. Control systems can range in size from a few modular panel-mounted controllers to large interconnected and in ...
s.
In a PID loop, the controller continuously calculates an ''error value'' as the difference between a desired setpoint and a measured process variable
In control theory, a process variable (PV; also process value or process parameter) is the current measured value of a particular part of a process which is being monitored or controlled. An example of this would be the temperature of a furnace ...
and applies a correction based on proportional, integral
In mathematics, an integral assigns numbers to functions in a way that describes displacement, area, volume, and other concepts that arise by combining infinitesimal data. The process of finding integrals is called integration. Along wit ...
, and derivative
In mathematics, the derivative of a function of a real variable measures the sensitivity to change of the function value (output value) with respect to a change in its argument (input value). Derivatives are a fundamental tool of calculus. ...
terms, respectively (sometimes denoted ''P'', ''I'', and ''D'') which give their name to the controller type.
The theoretical understanding and application date from the 1920s, and they are implemented in nearly all analog control systems; originally in mechanical controllers, and then using discrete electronics and latterly in industrial process computers.
Sequential control and logical sequence or system state control
Sequential control may be either to a fixed sequence or to a logical one that will perform different actions depending on various system states. An example of an adjustable but otherwise fixed sequence is a timer on a lawn sprinkler.
States refer to the various conditions that can occur in a use or sequence scenario of the system. An example is an elevator, which uses logic based on the system state to perform certain actions in response to its state and operator input. For example, if the operator presses the floor n button, the system will respond depending on whether the elevator is stopped or moving, going up or down, or if the door is open or closed, and other conditions.
Early development of sequential control was relay logic
Relay logic is a method of implementing combinational logic in electrical control circuits by using several electrical relays wired in a particular configuration.
Ladder logic
The schematic diagrams for relay logic circuits are often calle ...
, by which electrical relay
A relay
Electromechanical relay schematic showing a control coil, four pairs of normally open and one pair of normally closed contacts
An automotive-style miniature relay with the dust cover taken off
A relay is an electrically operated switch ...
s engage electrical contacts which either start or interrupt power to a device. Relays were first used in telegraph networks before being developed for controlling other devices, such as when starting and stopping industrial-sized electric motors or opening and closing solenoid valve
A solenoid valve is an electromechanically operated valve.
Solenoid valves differ in the characteristics of the electric current they use, the strength of the magnetic field they generate, the mechanism they use to regulate the fluid, and the ty ...
s. Using relays for control purposes allowed event-driven control, where actions could be triggered out of sequence, in response to external events. These were more flexible in their response than the rigid single-sequence cam timer
A cam timer or drum sequencer is an electromechanical system for controlling a sequence of events automatically. It resembles a music box with movable pins, controlling electrical switches instead of musical notes.
Description
An electric moto ...
s. More complicated examples involved maintaining safe sequences for devices such as swing bridge controls, where a lock bolt needed to be disengaged before the bridge could be moved, and the lock bolt could not be released until the safety gates had already been closed.
The total number of relays and cam timers can number into the hundreds or even thousands in some factories. Early programming techniques and languages were needed to make such systems manageable, one of the first being ladder logic, where diagrams of the interconnected relays resembled the rungs of a ladder. Special computers called programmable logic controllers
A programmable logic controller (PLC) or programmable controller is an industrial computer that has been ruggedized and adapted for the control of manufacturing processes, such as assembly lines, machines, robotic devices, or any activity t ...
were later designed to replace these collections of hardware with a single, more easily re-programmed unit.
In a typical hard wired motor start and stop circuit (called a ''control circuit'') a motor is started by pushing a "Start" or "Run" button that activates a pair of electrical relays. The "lock-in" relay locks in contacts that keep the control circuit energized when the push-button is released. (The start button is a normally open contact and the stop button is normally closed contact.) Another relay energizes a switch that powers the device that throws the motor starter switch (three sets of contacts for three-phase industrial power) in the main power circuit. Large motors use high voltage and experience high in-rush current, making speed important in making and breaking contact. This can be dangerous for personnel and property with manual switches. The "lock-in" contacts in the start circuit and the main power contacts for the motor are held engaged by their respective electromagnets until a "stop" or "off" button is pressed, which de-energizes the lock in relay.
Commonly interlock
An interlock is a feature that makes the state of two mechanisms or functions mutually dependent. It may be used to prevent undesired states in a finite-state machine, and may consist of any electrical, electronic, or mechanical devices or system ...
s are added to a control circuit. Suppose that the motor in the example is powering machinery that has a critical need for lubrication. In this case, an interlock could be added to ensure that the oil pump is running before the motor starts. Timers, limit switches, and electric eyes are other common elements in control circuits.
Solenoid valves are widely used on compressed air or hydraulic fluid for powering actuators on mechanical
Mechanical may refer to:
Machine
* Machine (mechanical), a system of mechanisms that shape the actuator input to achieve a specific application of output forces and movement
* Mechanical calculator, a device used to perform the basic operations of ...
components. While motor
An engine or motor is a machine designed to convert one or more forms of energy into mechanical energy.
Available energy sources include potential energy (e.g. energy of the Earth's gravitational field as exploited in hydroelectric power g ...
s are used to supply continuous rotary motion
Rotation around a fixed axis is a special case of rotational motion. The fixed-axis hypothesis excludes the possibility of an axis changing its orientation and cannot describe such phenomena as wobbling or precession. According to Euler's rot ...
, actuators are typically a better choice for intermittently creating a limited range of movement for a mechanical component, such as moving various mechanical arms, opening or closing valve
A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fitting ...
s, raising heavy press-rolls, applying pressure to presses.
Computer control
Computers can perform both sequential control and feedback control, and typically a single computer will do both in an industrial application. Programmable logic controllers (PLCs) are a type of special-purpose microprocessor
A microprocessor is a computer processor where the data processing logic and control is included on a single integrated circuit, or a small number of integrated circuits. The microprocessor contains the arithmetic, logic, and control circ ...
that replaced many hardware components such as timers and drum sequencers used in relay logic–type systems. General-purpose process control computers have increasingly replaced stand-alone controllers, with a single computer able to perform the operations of hundreds of controllers. Process control computers can process data from a network of PLCs, instruments, and controllers to implement typical (such as PID) control of many individual variables or, in some cases, to implement complex control algorithm
In mathematics and computer science, an algorithm () is a finite sequence of rigorous instructions, typically used to solve a class of specific problems or to perform a computation. Algorithms are used as specifications for performing ...
s using multiple inputs and mathematical manipulations. They can also analyze data and create real-time graphical displays for operators and run reports for operators, engineers, and management.
Control of an automated teller machine
An automated teller machine (ATM) or cash machine (in British English) is an electronic telecommunications device that enables customers of financial institutions to perform financial transactions, such as cash withdrawals, deposits, fun ...
(ATM) is an example of an interactive process in which a computer will perform a logic-derived response to a user selection based on information retrieved from a networked database. The ATM process has similarities with other online transaction processes. The different logical responses are called ''scenarios''. Such processes are typically designed with the aid of use case
In software and systems engineering, the phrase use case is a polyseme with two senses:
# A usage scenario for a piece of software; often used in the plural to suggest situations where a piece of software may be useful.
# A potential scenario ...
s and flowcharts, which guide the writing of the software code. The earliest feedback control mechanism was the water clock invented by Greek engineer Ctesibius (285–222 BC).
History
Early history
It was a preoccupation of the Greeks and Arabs (in the period between about 300 BC and about 1200 AD) to keep accurate track of time. In Ptolemaic Egypt, about 270 BC, Ctesibius
Ctesibius or Ktesibios or Tesibius ( grc-gre, Κτησίβιος; fl. 285–222 BC) was a Greek inventor and mathematician in Alexandria, Ptolemaic Egypt. He wrote the first treatises on the science of compressed air and its uses in pumps (a ...
described a float regulator for a water clock
A water clock or clepsydra (; ; ) is a timepiece by which time is measured by the regulated flow of liquid into (inflow type) or out from (outflow type) a vessel, and where the amount is then measured.
Water clocks are one of the oldest time- ...
, a device not unlike the ball and cock in a modern flush toilet. This was the earliest feedback-controlled mechanism. The appearance of the mechanical clock in the 14th century made the water clock and its feedback control system obsolete.
The Persian
Persian may refer to:
* People and things from Iran, historically called ''Persia'' in the English language
** Persians, the majority ethnic group in Iran, not to be conflated with the Iranic peoples
** Persian language, an Iranian language of the ...
Banū Mūsā brothers, in their ''Book of Ingenious Devices
The ''Book of Ingenious Devices'' (Arabic: كتاب الحيل ''Kitab al-Hiyal'', Persian: كتاب ترفندها ''Ketab tarfandha'', literally: "The Book of Tricks") is a large illustrated work on mechanical devices, including automata, pub ...
'' (850 AD), described a number of automatic controls.Ahmad Y Hassan
Ahmad Yousef Al-Hassan ( ar, links=no, أحمد يوسف الحسن) (June 25, 1925 – April 28, 2012) was a Palestinian/Syrian/Canadian historian of Arabic and Islamic science and technology, educated in Jerusalem, Cairo, and London with a PhD i ...
Transfer Of Islamic Technology To The West, Part II: Transmission Of Islamic Engineering
Two-step level controls for fluids, a form of discontinuous variable structure control
Variable structure control (VSC) is a form of discontinuous nonlinear control. The method alters the dynamics of a nonlinear system by application of a high-frequency ''switching control''. The state- feedback control law is ''not'' a continuou ...
s, was developed by the Banu Musa brothers. They also described a feedback controller
Control theory is a field of mathematics that deals with the control of dynamical systems in engineered processes and machines. The objective is to develop a model or algorithm governing the application of system inputs to drive the system to a ...
.Otto Mayr
Otto Mayr (born November 2, 1930) is a German mechanical engineer, historian of technology, curator, author and former director of the National Museum of History and Technology in Washington DC and the Deutsches Museum in Munich. He is particularl ...
(1970). ''The Origins of Feedback Control'', MIT Press
The MIT Press is a university press affiliated with the Massachusetts Institute of Technology (MIT) in Cambridge, Massachusetts (United States). It was established in 1962.
History
The MIT Press traces its origins back to 1926 when MIT publish ...
.Donald Routledge Hill
Donald Routledge Hill (6 August 1922 – 30 May 1994)D. A. King, “In Memoriam: Donald Routledge Hill (1922-1994)”, ''Arabic Sciences and Philosophy,'' Volume 5 / Issue 02 / September 1995, pp 297-302 was a British engineer and historian of sc ...
, "Mechanical Engineering in the Medieval Near East", ''Scientific American'', May 1991, p. 64-69. The design of feedback control systems up through the Industrial Revolution was by trial-and-error, together with a great deal of engineering intuition. Thus, it was more of an art than a science. It was not until the mid-19th century that the stability of feedback control systems was analyzed using mathematics, the formal language of automatic control theory.
The centrifugal governor
A centrifugal governor is a specific type of governor with a feedback system that controls the speed of an engine by regulating the flow of fuel or working fluid, so as to maintain a near-constant speed. It uses the principle of proportional con ...
was invented by Christiaan Huygens in the seventeenth century, and used to adjust the gap between millstones.
Industrial Revolution in Western Europe
The introduction of prime movers, or self-driven machines advanced grain mills, furnaces, boilers, and the steam engine created a new requirement for automatic control systems including temperature regulators (invented in 1624; see Cornelius Drebbel
Cornelis Jacobszoon Drebbel ( ) (1572 – 7 November 1633) was a Dutch engineer and inventor. He was the builder of the first operational submarine in 1620 and an innovator who contributed to the development of measurement and control systems, ...
), pressure regulator
A pressure regulator is a valve that controls the pressure of a fluid or gas to a desired value, using negative feedback from the controlled pressure. Regulators are used for gases and liquids, and can be an integral device with a pressure setti ...
s (1681), float regulators (1700) and speed control
Cruise control (also known as speed control, cruise command, autocruise, or tempomat) is a system that automatically controls the speed of a motor vehicle. The system is a servomechanism that takes over the throttle of the car to maintain a ste ...
devices. Another control mechanism was used to tent the sails of windmills. It was patented by Edmund Lee in 1745. Also in 1745, Jacques de Vaucanson
Jacques de Vaucanson (; February 24, 1709 – November 21, 1782) was a French inventor and artist who built the first all-metal lathe which was very important to the Industrial Revolution. The lathe is known as the mother of machine tools, as i ...
invented the first automated loom. Around 1800, Joseph Marie Jacquard created a punch-card system to program looms.
In 1771 Richard Arkwright invented the first fully automated spinning mill driven by water power, known at the time as the water frame
The water frame is a spinning frame that is powered by a water-wheel. Water frames in general have existed since Ancient Egypt times. Richard Arkwright, who patented the technology in 1769, designed a model for the production of cotton thread; ...
. An automatic flour mill was developed by Oliver Evans
Oliver Evans (September 13, 1755 – April 15, 1819) was an American inventor, engineer and businessman born in rural Delaware and later rooted commercially in Philadelphia. He was one of the first Americans building steam engines and an advoca ...
in 1785, making it the first completely automated industrial process.
A centrifugal governor was used by Mr. Bunce of England in 1784 as part of a model steam crane
A steam crane is a crane powered by a steam engine. It may be fixed or mobile and, if mobile, it may run on rail tracks, caterpillar tracks, road wheels, or be mounted on a barge. It usually has a vertical boiler placed at the back so that ...
. The centrifugal governor was adopted by James Watt for use on a steam engine in 1788 after Watt's partner Boulton saw one at a flour mill Boulton & Watt
Boulton & Watt was an early British engineering and manufacturing firm in the business of designing and making marine and stationary steam engines. Founded in the English West Midlands around Birmingham in 1775 as a partnership between the Eng ...
were building. The governor could not actually hold a set speed; the engine would assume a new constant speed in response to load changes. The governor was able to handle smaller variations such as those caused by fluctuating heat load to the boiler. Also, there was a tendency for oscillation whenever there was a speed change. As a consequence, engines equipped with this governor were not suitable for operations requiring constant speed, such as cotton spinning.
Several improvements to the governor, plus improvements to valve cut-off timing on the steam engine, made the engine suitable for most industrial uses before the end of the 19th century. Advances in the steam engine stayed well ahead of science, both thermodynamics and control theory. The governor received relatively little scientific attention until James Clerk Maxwell
James Clerk Maxwell (13 June 1831 – 5 November 1879) was a Scottish mathematician and scientist responsible for the classical theory of electromagnetic radiation, which was the first theory to describe electricity, magnetism and li ...
published a paper that established the beginning of a theoretical basis for understanding control theory.
20th century
Relay logic was introduced with factory electrification
Electrification is the process of powering by electricity and, in many contexts, the introduction of such power by changing over from an earlier power source.
The broad meaning of the term, such as in the history of technology, economic histor ...
, which underwent rapid adaption from 1900 through the 1920s. Central electric power stations were also undergoing rapid growth and the operation of new high-pressure boilers, steam turbines and electrical substations created a large demand for instruments and controls. Central control rooms became common in the 1920s, but as late as the early 1930s, most process controls were on-off. Operators typically monitored charts drawn by recorders that plotted data from instruments. To make corrections, operators manually opened or closed valves or turned switches on or off. Control rooms also used color-coded lights to send signals to workers in the plant to manually make certain changes.
The development of the electronic amplifier during the 1920s, which was important for long-distance telephony, required a higher signal-to-noise ratio, which was solved by negative feedback noise cancellation. This and other telephony applications contributed to the control theory. In the 1940s and 1950s, German mathematician Irmgard Flügge-Lotz
Irmgard Flügge-Lotz, née Lotz (16 July 1903 – 22 May 1974) was a German-American mathematician and aerospace engineer. She was a pioneer in the development of the theory of discontinuous automatic control, which has found wide application ...
developed the theory of discontinuous automatic controls, which found military applications during the Second World War
World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposi ...
to fire control system
A fire-control system (FCS) is a number of components working together, usually a gun data computer, a director, and radar, which is designed to assist a ranged weapon system to target, track, and hit a target. It performs the same task as a h ...
s and aircraft navigation system A navigation system is a computing system that aids in navigation. Navigation systems may be entirely on board the vehicle or vessel that the system is controlling (for example, on the ship's bridge) or located elsewhere, making use of radio or othe ...
s.
Controllers, which were able to make calculated changes in response to deviations from a set point rather than on-off control, began being introduced in the 1930s. Controllers allowed manufacturing to continue showing productivity gains to offset the declining influence of factory electrification.
Factory productivity was greatly increased by electrification in the 1920s. U.S. manufacturing productivity growth fell from 5.2%/yr 1919–29 to 2.76%/yr 1929–41. Alexander Field notes that spending on non-medical instruments increased significantly from 1929 to 1933 and remained strong thereafter.
The First and Second World Wars saw major advancements in the field of mass communication and signal processing
Signal processing is an electrical engineering subfield that focuses on analyzing, modifying and synthesizing ''signals'', such as sound, images, and scientific measurements. Signal processing techniques are used to optimize transmissions, ...
. Other key advances in automatic controls include differential equation
In mathematics, a differential equation is an equation that relates one or more unknown functions and their derivatives. In applications, the functions generally represent physical quantities, the derivatives represent their rates of change, an ...
s, stability theory and system theory (1938), frequency domain analysis (1940), ship control (1950), and stochastic analysis
Stochastic calculus is a branch of mathematics that operates on stochastic processes. It allows a consistent theory of integration to be defined for integrals of stochastic processes with respect to stochastic processes. This field was created an ...
(1941).
Starting in 1958, various systems based on solid-state
Solid state, or solid matter, is one of the four fundamental states of matter.
Solid state may also refer to:
Electronics
* Solid-state electronics, circuits built of solid materials
* Solid state ionics, study of ionic conductors and their use ...
digital logic
A logic gate is an idealized or physical device implementing a Boolean function, a logical operation performed on one or more binary inputs that produces a single binary output. Depending on the context, the term may refer to an ideal logic gate ...
modules for hard-wired programmed logic controllers (the predecessors of programmable logic controllers LC emerged to replace electro-mechanical relay logic in industrial control system
An industrial control system (ICS) is an electronic control system and associated instrumentation used for industrial process control. Control systems can range in size from a few modular panel-mounted controllers to large interconnected and in ...
s for process control and automation, including early Telefunken
Telefunken was a German radio and television apparatus company, founded in Berlin in 1903, as a joint venture of Siemens & Halske and the ''Allgemeine Elektrizitäts-Gesellschaft'' (AEG) ('General electricity company').
The name "Telefunken" ap ...
/ AEG Logistat, Siemens Simatic
SIMATIC is a series of programmable logic controller and automation systems, developed by Siemens. Introduced in 1958, the series has gone through four major generations, the latest being the ''SIMATIC S7'' generation. The series is intended for ...
, Philips
Koninklijke Philips N.V. (), commonly shortened to Philips, is a Dutch multinational conglomerate corporation that was founded in Eindhoven in 1891. Since 1997, it has been mostly headquartered in Amsterdam, though the Benelux headquarters i ...
/Mullard
Mullard Limited was a British manufacturer of electronic components. The Mullard Radio Valve Co. Ltd. of Southfields, London, was founded in 1920 by Captain Stanley R. Mullard, who had previously designed thermionic valves for the Admir ...
/ Norbit
In electronics, the NORBIT family of modules is a very early form (since 1960) of digital logic developed by Philips (and also provided through and Mullard) that uses modules containing discrete components to build logic function blocks in re ...
, BBC #REDIRECT BBC #REDIRECT BBC
Here i going to introduce about the best teacher of my life b BALAJI sir. He is the precious gift that I got befor 2yrs . How has helped and thought all the concept and made my success in the 10th board exam. ...
...
Sigmatronic,
ACEC Logacec
SA Ateliers de Constructions Electriques de Charleroi (abbrev. ACEC) was a Belgian manufacturer of electrical generation, transmission, transport, lighting and industrial equipment, with origins dating to the late 19th century as a successor to th ...
,
Estacord, Krone Mibakron, Bistat, Datapac, Norlog, SSR, or Procontic systems.
In 1959
Texaco
Texaco, Inc. ("The Texas Company") is an American oil brand owned and operated by Chevron Corporation. Its flagship product is its fuel "Texaco with Techron". It also owned the Havoline motor oil brand. Texaco was an independent company unt ...
's
Port Arthur Refinery
The Motiva refinery is an oil refinery located in Port Arthur, Texas. It is the largest oil refinery in North America.
The first processing units of the Port Arthur Refinery were constructed in 1902 by the Texas Company, later Texaco. The root ...
became the first chemical plant to use
digital control
Digital control is a branch of control theory that uses digital computers to act as system controllers.
Depending on the requirements, a digital control system can take the form of a microcontroller to an ASIC to a standard desktop computer. ...
.
Conversion of factories to digital control began to spread rapidly in the 1970s as the price of
computer hardware fell.
Significant applications
The automatic
telephone switchboard
A telephone switchboard was a device used to connect circuits of telephones to establish telephone calls between users or other switchboards, throughout the 20th century. The switchboard was an essential component of a manual telephone exchange, ...
was introduced in 1892 along with dial telephones. By 1929, 31.9% of the Bell system was automatic.
Automatic telephone switching originally used vacuum tube amplifiers and electro-mechanical switches, which consumed a large amount of electricity. Call volume eventually grew so fast that it was feared the telephone system would consume all electricity production, prompting
Bell Labs
Nokia Bell Labs, originally named Bell Telephone Laboratories (1925–1984),
then AT&T Bell Laboratories (1984–1996)
and Bell Labs Innovations (1996–2007),
is an American industrial Research and development, research and scientific developm ...
to begin research on the
transistor
upright=1.4, gate (G), body (B), source (S) and drain (D) terminals. The gate is separated from the body by an insulating layer (pink).
A transistor is a semiconductor device used to Electronic amplifier, amplify or electronic switch, switch ...
.
The logic performed by telephone switching relays was the inspiration for the digital computer.
The first commercially successful glass bottle-blowing machine was an automatic model introduced in 1905. The machine, operated by a two-man crew working 12-hour shifts, could produce 17,280 bottles in 24 hours, compared to 2,880 bottles made by a crew of six men and boys working in a shop for a day. The cost of making bottles by machine was 10 to 12 cents per gross compared to $1.80 per gross by the manual glassblowers and helpers.
Sectional electric drives were developed using control theory. Sectional electric drives are used on different sections of a machine where a precise differential must be maintained between the sections. In steel rolling, the metal elongates as it passes through pairs of rollers, which must run at successively faster speeds. In paper making paper, the sheet shrinks as it passes around steam-heated drying arranged in groups, which must run at successively slower speeds. The first application of a sectional electric drive was on a paper machine in 1919. One of the most important developments in the steel industry during the 20th century was continuous wide strip rolling, developed by Armco in 1928.
![Automated liquid oral dose](https://upload.wikimedia.org/wikipedia/commons/a/a9/Automated_liquid_oral_dose.jpg)
Before automation, many chemicals were made in batches. In 1930, with the widespread use of instruments and the emerging use of controllers, the founder of Dow Chemical Co. was advocating
continuous production
Continuous production is a flow production method used to manufacture, produce, or process materials without interruption. Continuous production is called a continuous process or a continuous flow process because the materials, either dry bulk ...
.
Self-acting machine tools that displaced hand dexterity so they could be operated by boys and unskilled laborers were developed by
James Nasmyth
James Hall Nasmyth (sometimes spelled Naesmyth, Nasmith, or Nesmyth) (19 August 1808 – 7 May 1890) was a Scottish engineer, philosopher, artist and inventor famous for his development of the steam hammer. He was the co-founder of Nasmyth, ...
in the 1840s.
Machine tools were automated with
Numerical control (NC) using punched paper tape in the 1950s. This soon evolved into computerized numerical control (CNC).
Today extensive automation is practiced in practically every type of manufacturing and assembly process. Some of the larger processes include electrical power generation, oil refining, chemicals, steel mills, plastics, cement plants, fertilizer plants, pulp and paper mills, automobile and truck assembly, aircraft production, glass manufacturing, natural gas separation plants, food and beverage processing, canning and bottling and manufacture of various kinds of parts. Robots are especially useful in hazardous applications like automobile spray painting. Robots are also used to assemble electronic circuit boards. Automotive welding is done with robots and automatic welders are used in applications like pipelines.
Space/computer age
With the advent of the space age in 1957, controls design, particularly in the United States, turned away from the frequency-domain techniques of classical control theory and backed into the differential equation techniques of the late 19th century, which were couched in the time domain. During the 1940s and 1950s, German mathematician
Irmgard Flugge-Lotz Irmgard is a feminine German given name. Notable people with the name include:
* Irmgard of Berg (fl. 12th century), German noble, daughter of Adolf VI, Count of Berg
* Irmgard of Chiemsee (c. 831/833 – 16 July 866)
* Irmgard of Cleves (c. 130 ...
developed the theory of discontinuous automatic control, which became widely used in
hysteresis control systems such as
navigation system A navigation system is a computing system that aids in navigation. Navigation systems may be entirely on board the vehicle or vessel that the system is controlling (for example, on the ship's bridge) or located elsewhere, making use of radio or othe ...
s,
fire-control systems, and
electronics
The field of electronics is a branch of physics and electrical engineering that deals with the emission, behaviour and effects of electrons using electronic devices. Electronics uses active devices to control electron flow by amplification ...
. Through Flugge-Lotz and others, the modern era saw time-domain design for
nonlinear systems
In mathematics and science, a nonlinear system is a system in which the change of the output is not proportional to the change of the input. Nonlinear problems are of interest to engineers, biologists, physicists, mathematicians, and many other ...
(1961),
navigation
Navigation is a field of study that focuses on the process of monitoring and controlling the movement of a craft or vehicle from one place to another.Bowditch, 2003:799. The field of navigation includes four general categories: land navigation, ...
(1960),
optimal control and
estimation theory (1962),
nonlinear control theory
Nonlinear control theory is the area of control theory which deals with systems that are nonlinear, time-variant, or both. Control theory is an interdisciplinary branch of engineering and mathematics that is concerned with the behavior of dyn ...
(1969),
digital control
Digital control is a branch of control theory that uses digital computers to act as system controllers.
Depending on the requirements, a digital control system can take the form of a microcontroller to an ASIC to a standard desktop computer. ...
and
filtering theory (1974), and the
personal computer
A personal computer (PC) is a multi-purpose microcomputer whose size, capabilities, and price make it feasible for individual use. Personal computers are intended to be operated directly by an end user, rather than by a computer expert or tec ...
(1983).
Advantages, disadvantages, and limitations
Perhaps the most cited advantage of automation in industry is that it is associated with faster production and cheaper labor costs. Another benefit could be that it replaces hard, physical, or monotonous work. Additionally, tasks that take place in
hazardous environments or that are otherwise beyond human capabilities can be done by machines, as machines can operate even under extreme temperatures or in atmospheres that are radioactive or toxic. They can also be maintained with simple quality checks. However, at the time being, not all tasks can be automated, and some tasks are more expensive to automate than others. Initial costs of installing the machinery in factory settings are high, and failure to maintain a system could result in the loss of the product itself.
Moreover, some studies seem to indicate that industrial automation could impose ill effects beyond operational concerns, including worker displacement due to systemic loss of employment and compounded environmental damage; however, these findings are both convoluted and controversial in nature, and could potentially be circumvented.
The main advantages of automation are:
*Increased throughput or productivity
*Improved quality
*Increased
predictability
Predictability is the degree to which a correct prediction or forecast of a system's state can be made, either qualitatively or quantitatively.
Predictability and causality
Causal determinism has a strong relationship with predictability. Per ...
*Improved
robustness
Robustness is the property of being strong and healthy in constitution. When it is transposed into a system, it refers to the ability of tolerating perturbations that might affect the system’s functional body. In the same line ''robustness'' ca ...
(consistency), of processes or product
*Increased consistency of output
*Reduced direct human labor costs and expenses
*Reduced
cycle time
*Increased accuracy
*Relieving humans of monotonously repetitive work
*Required work in development, deployment, maintenance, and operation of automated processes — often structured as “jobs”
*Increased human freedom to do other things
Automation primarily describes machines replacing human action, but it is also loosely associated with mechanization, machines replacing human labor. Coupled with mechanization, extending human capabilities in terms of size, strength, speed, endurance, visual range & acuity, hearing frequency & precision, electromagnetic sensing & effecting, etc., advantages include:
*Relieving humans of dangerous work stresses and
occupational injuries (e.g., fewer strained backs from lifting heavy objects)
*Removing humans from dangerous environments (e.g. fire, space, volcanoes, nuclear facilities, underwater, etc.)
The main disadvantages of automation are:
*High initial cost
*Faster production without human intervention can mean faster unchecked production of defects where automated processes are defective.
*Scaled-up capacities can mean scaled-up problems when systems fail — releasing dangerous toxins, forces, energies, etc., at scaled-up rates.
*Human adaptiveness is often poorly understood by automation initiators. It is often difficult to anticipate every contingency and develop fully preplanned automated responses for every situation. The discoveries inherent in automating processes can require unanticipated iterations to resolve, causing unanticipated costs and delays.
*People anticipating employment income may be seriously disrupted by others deploying automation where no similar income is readily available.
Paradox of automation
The
paradox
A paradox is a logically self-contradictory statement or a statement that runs contrary to one's expectation. It is a statement that, despite apparently valid reasoning from true premises, leads to a seemingly self-contradictory or a logically u ...
of automation says that the more efficient the automated system, the more crucial the human contribution of the operators. Humans are less involved, but their involvement becomes more critical.
Lisanne Bainbridge, a cognitive psychologist, identified these issues notably in her widely cited paper "Ironies of Automation." If an automated system has an error, it will multiply that error until it is fixed or shut down. This is where human operators come in. A fatal example of this was
Air France Flight 447
Air France Flight 447 (AF447 or AFR447) was a scheduled international passenger flight from Rio de Janeiro, Brazil, to Paris, France. On 1 June 2009, inconsistent airspeed indications led to the pilots inadvertently stalling the Airbus A330 ser ...
, where a failure of automation put the pilots into a manual situation they were not prepared for.
Limitations
* Current technology is unable to automate all the desired tasks.
* Many operations using automation have large amounts of invested capital and produce high volumes of product, making malfunctions extremely costly and potentially hazardous. Therefore, some personnel is needed to ensure that the entire system functions properly and that safety and product quality are maintained.
* As a process becomes increasingly automated, there is less and less labor to be saved or quality improvement to be gained. This is an example of both
diminishing returns
In economics, diminishing returns are the decrease in marginal (incremental) output of a production process as the amount of a single factor of production is incrementally increased, holding all other factors of production equal ( ceteris parib ...
and the
logistic function.
* As more and more processes become automated, there are fewer remaining non-automated processes. This is an example of the exhaustion of opportunities. New technological paradigms may, however, set new limits that surpass the previous limits.
Current limitations
Many roles for humans in industrial processes presently lie beyond the scope of automation. Human-level
pattern recognition
Pattern recognition is the automated recognition of patterns and regularities in data. It has applications in statistical data analysis, signal processing, image analysis, information retrieval, bioinformatics, data compression, computer graphics ...
,
language comprehension
Sentence processing takes place whenever a reader or listener processes a language utterance, either in isolation or in the context of a conversation or a text. Many studies of the human language comprehension process have focused on reading of s ...
, and language production ability are well beyond the capabilities of modern mechanical and computer systems (but see ''
Watson computer''). Tasks requiring subjective assessment or synthesis of complex sensory data, such as scents and sounds, as well as high-level tasks such as strategic planning, currently require human expertise. In many cases, the use of humans is more
cost-effective
Cost-effectiveness analysis (CEA) is a form of economic analysis that compares the relative costs and outcomes (effects) of different courses of action. Cost-effectiveness analysis is distinct from cost–benefit analysis, which assigns a monetar ...
than mechanical approaches even where the automation of industrial tasks is possible. Overcoming these obstacles is a theorized path to
post-scarcity
Post-scarcity is a theoretical economic situation in which most goods can be produced in great abundance with minimal human labor needed, so that they become available to all very cheaply or even freely.
Post-scarcity does not mean that scarc ...
economics.
Societal impact and unemployment
Increased automation often causes workers to feel anxious about losing their jobs as technology renders their skills or experience unnecessary. Early in the
Industrial Revolution
The Industrial Revolution was the transition to new manufacturing processes in Great Britain, continental Europe, and the United States, that occurred during the period from around 1760 to about 1820–1840. This transition included going f ...
, when inventions like the
steam engine were making some job categories expendable, workers forcefully resisted these changes.
Luddites
The Luddites were a secret oath-based organisation of English textile workers in the 19th century who formed a radical faction which destroyed textile machinery. The group is believed to have taken its name from Ned Ludd, a legendary weaver ...
, for instance, were English
textile workers
Textile is an umbrella term that includes various fiber-based materials, including fibers, yarns, filaments, threads, different fabric types, etc. At first, the word "textiles" only referred to woven fabrics. However, weaving is not the ...
who protested the introduction of
weaving machines by destroying them. More recently, some residents of
Chandler, Arizona
Chandler is a city in Maricopa County, Arizona, United States, and a suburb in the Phoenix-Mesa-Chandler Metropolitan Statistical Area (MSA). It is bordered to the north and west by Tempe, to the north by Mesa, to the west by Phoenix, to the ...
, have slashed tires and pelted rocks at
driver-less cars, in protest over the cars' perceived threat to human safety and job prospects.
The relative anxiety about automation reflected in opinion polls seems to correlate closely with the strength of
organized labor in that region or nation. For example, while a study by the
Pew Research Center indicated that 72% of Americans are worried about increasing automation in the workplace, 80% of Swedes see automation and
artificial intelligence
Artificial intelligence (AI) is intelligence—perceiving, synthesizing, and inferring information—demonstrated by machines, as opposed to intelligence displayed by animals and humans. Example tasks in which this is done include speech r ...
(AI) as a good thing, due to the country's still-powerful unions and a more robust national
safety net
A safety net is a net to protect people from injury after falling from heights by limiting the distance they fall, and deflecting to dissipate the impact energy. The term also refers to devices for arresting falling or flying objects for the ...
.
In the U.S., 47% of all current jobs have the potential to be fully automated by 2033, according to the research of experts
Carl Benedikt Frey
Carl Benedikt Frey is a Swedish-German economist and economic historian. He is Oxford Martin Citi Fellow at Oxford University where he directs the programme on the Future of Work at the Oxford Martin School.
Career
After studying economics, his ...
and Michael Osborne. Furthermore, wages and educational attainment appear to be strongly negatively correlated with an occupation's risk of being automated. Even highly skilled professional jobs like a
lawyer,
doctor
Doctor or The Doctor may refer to:
Personal titles
* Doctor (title), the holder of an accredited academic degree
* A medical practitioner, including:
** Physician
** Surgeon
** Dentist
** Veterinary physician
** Optometrist
*Other roles
** ...
,
engineer
Engineers, as practitioners of engineering, are professionals who invent, design, analyze, build and test machines, complex systems, structures, gadgets and materials to fulfill functional objectives and requirements while considering the limit ...
,
journalist
A journalist is an individual that collects/gathers information in form of text, audio, or pictures, processes them into a news-worthy form, and disseminates it to the public. The act or process mainly done by the journalist is called journalis ...
are at risk of automation.
Prospects are particularly bleak for occupations that do not presently require a university degree, such as truck driving. Even in high-tech corridors like
Silicon Valley
Silicon Valley is a region in Northern California that serves as a global center for high technology and innovation. Located in the southern part of the San Francisco Bay Area, it corresponds roughly to the geographical areas San Mateo Coun ...
, concern is spreading about a future in which a sizable percentage of adults have little chance of sustaining gainful employment. "In ''The Second Machine Age,'' Erik Brynjolfsson and Andrew McAfee argue that "...there's never been a better time to be a worker with special skills or the right education, because these people can use technology to create and capture value. However, there's never been a worse time to be a worker with only 'ordinary' skills and abilities to offer, because computers, robots, and other digital technologies are acquiring these skills and abilities at an extraordinary rate." As the example of Sweden suggests, however, the transition to a more automated future need not inspire panic, if there is sufficient political will to promote the retraining of workers whose positions are being rendered obsolete.
According to a 2020 study in the ''
Journal of Political Economy'', automation has robust negative effects on employment and wages: "One more robot per thousand workers reduces the employment-to-population ratio by 0.2 percentage points and wages by 0.42%."
Research by
Carl Benedikt Frey
Carl Benedikt Frey is a Swedish-German economist and economic historian. He is Oxford Martin Citi Fellow at Oxford University where he directs the programme on the Future of Work at the Oxford Martin School.
Career
After studying economics, his ...
and Michael Osborne of the
Oxford Martin School
The Oxford Martin School is a research and policy unit based in the Social Sciences Division of the University of Oxford. It was founded in June 2005 as the James Martin 21st Century School and is located in the original building of the Indian I ...
argued that employees engaged in "tasks following well-defined procedures that can easily be performed by sophisticated algorithms" are at risk of displacement, and 47% of jobs in the US were at risk. The study, released as a
working paper
A working paper or work paper may be:
*A working paper or technical paper. Often, authors will release working papers to share ideas about a topic or to elicit feedback before submitting to a peer reviewed conference or academic journal. Worki ...
in 2013 and published in 2017, predicted that automation would put low-paid physical occupations most at risk, by surveying a group of colleagues on their opinions.
However, according to a study published in ''
McKinsey Quarterly
The ''McKinsey Quarterly'' is a business magazine focused on management and organizational theory. It is written primarily by McKinsey
McKinsey & Company is a global management consulting firm founded in 1926 by University of Chicago profess ...
''
in 2015 the impact of computerization in most cases is not the replacement of employees but automation of portions of the tasks they perform.
The
methodology
In its most common sense, methodology is the study of research methods. However, the term can also refer to the methods themselves or to the philosophical discussion of associated background assumptions. A method is a structured procedure for br ...
of the McKinsey study has been heavily criticized for being intransparent and relying on subjective assessments. The methodology of Frey and Osborne has been subjected to criticism, as lacking evidence, historical awareness, or credible methodology. Additionally, the Organisation for Economic Co-operation and Development (
OECD
The Organisation for Economic Co-operation and Development (OECD; french: Organisation de coopération et de développement économiques, ''OCDE'') is an intergovernmental organisation with 38 member countries, founded in 1961 to stimulate e ...
) found that across the 21 OECD countries, 9% of jobs are automatable.
The
Obama administration pointed out that every 3 months "about 6 percent of jobs in the economy are destroyed by shrinking or closing businesses, while a slightly larger percentage of jobs are added." A recent
MIT economics study of automation in the U.S. from 1990 to 2007 found that there may be a negative impact on employment and wages when robots are introduced to an industry. When one robot is added per one thousand workers, the employment to population ratio decreases between 0.18 and 0.34 percentages and wages are reduced by 0.25–0.5 percentage points. During the time period studied, the US did not have many robots in the economy which restricts the impact of automation. However, automation is expected to triple (conservative estimate) or quadruple (a generous estimate) leading these numbers to become substantially higher.
Based on a formula by
Gilles Saint-Paul
Gilles Saint-Paul (born 8 February 1963) is a French economist at Paris School of Economics. He also is a scientific advisor to the Economic Studies Directorate at the French Ministry of the Environment. His main interests include the political e ...
, an economist at
Toulouse 1 University, the demand for unskilled human capital declines at a slower rate than the demand for skilled human capital increases. In the long run and for society as a whole it has led to cheaper products,
lower average work hours, and new industries forming (i.e., robotics industries, computer industries, design industries). These new industries provide many high salary skill-based jobs to the economy. By 2030, between 3 and 14 percent of the global workforce will be forced to switch job categories due to automation eliminating jobs in an entire sector. While the number of jobs lost to automation is often offset by jobs gained from technological advances, the same type of job loss is not the same one replaced and that leading to increasing unemployment in the lower-middle class. This occurs largely in the US and developed countries where technological advances contribute to higher demand for highly skilled labor but demand for middle-wage labor continues to fall. Economists call this trend "income polarization" where unskilled labor wages are driven down and skilled labor is driven up and it is predicted to continue in developed economies.
Unemployment is becoming a problem in the U.S. due to the exponential growth rate of automation and technology. According to Kim, Kim, and Lee (2017:1), "
seminal study by Frey and Osborne in 2013 predicted that 47% of the 702 examined occupations in the U.S. faced a high risk of decreased employment rate within the next 10–25 years as a result of computerization." As many jobs are becoming obsolete, which is causing job displacement, one possible solution would be for the government to assist with a
universal basic income
Universal basic income (UBI) is a social welfare proposal in which all citizens of a given population regularly receive an unconditional transfer payment, that is, without a means test or need to work. It would be received independently of a ...
(UBI) program. UBI would be a guaranteed, non-taxed income of around 1000 dollars per month, paid to all U.S. citizens over the age of 21. UBI would help those who are displaced take on jobs that pay less money and still afford to get by. It would also give those that are employed with jobs that are likely to be replaced by automation and technology extra money to spend on education and training on new demanding employment skills. UBI, however, should be seen as a short-term solution as it doesn't fully address the issue of income inequality which will be exacerbated by job displacement.
Lights-out manufacturing
Lights-out manufacturing is a production system with no human workers, to eliminate labor costs.
Lights out manufacturing grew in popularity in the U.S. when General Motors in 1982 implemented humans "hands-off" manufacturing to "replace risk-averse bureaucracy with automation and robots". However, the factory never reached full "lights out" status.
The expansion of lights out manufacturing requires:
* Reliability of equipment
* Long-term mechanic capabilities
* Planned preventive maintenance
* Commitment from the staff
Health and environment
The costs of automation to the environment are different depending on the technology, product or engine automated. There are automated engines that consume more energy resources from the Earth in comparison with previous engines and vice versa. Hazardous operations, such as
oil refining, the manufacturing of
industrial chemicals
The chemical industry comprises the companies that produce industrial chemicals. Central to the modern world economy, it converts raw materials (oil, natural gas, air, water, metals, and minerals) into more than 70,000 different products. The ...
, and all forms of
metal working
Metalworking is the process of shaping and reshaping metals to create useful objects, parts, assemblies, and large scale structures. As a term it covers a wide and diverse range of processes, skills, and tools for producing objects on every scale ...
, were always early contenders for automation.
The automation of vehicles could prove to have a substantial impact on the environment, although the nature of this impact could be beneficial or harmful depending on several factors. Because
automated vehicles are much less likely to get into accidents compared to human-driven vehicles, some precautions built into current models (such as
anti-lock brake
An anti-lock braking system (ABS) is a safety anti-skid braking system used on aircraft and on land vehicles, such as cars, motorcycles, trucks, and buses. ABS operates by preventing the wheels from locking up during braking, thereby maintai ...
s or
laminated glass
Laminated glass (LG) is a type of safety glass that holds together when shattered. In the event of breaking, it is held in place by a thin polymer interlayer, typically of polyvinyl butyral (PVB), ethylene-vinyl acetate (EVA), lonoplast polyme ...
) would not be required for self-driving versions. Removing these safety features would also significantly reduce the weight of the vehicle, thus increasing
fuel economy and reducing emissions per mile. Self-driving vehicles are also more precise concerning acceleration and breaking, and this could contribute to reduced emissions. Self-driving cars could also potentially utilize fuel-efficient features such as route mapping that can calculate and take the most efficient routes. Despite this potential to reduce emissions, some researchers theorize that an increase in the production of self-driving cars could lead to a boom of vehicle ownership and use. This boom could potentially negate any environmental benefits of self-driving cars if a large enough number of people begin driving personal vehicles more frequently.
Automation of homes and home appliances is also thought to impact the environment, but the benefits of these features are also questioned. A study of energy consumption of automated homes in Finland showed that
smart home
Smart or SMART may refer to:
Arts and entertainment
* ''Smart'' (Hey! Say! JUMP album), 2014
* Smart (Hotels.com), former mascot of Hotels.com
* ''Smart'' (Sleeper album), 1995 debut album by Sleeper
* '' SMart'', a children's television se ...
s could reduce energy consumption by monitoring levels of consumption in different areas of the home and adjusting consumption to reduce energy leaks (e.g. automatically reducing consumption during the nighttime when activity is low). This study, along with others, indicated that the smart home's ability to monitor and adjust consumption levels would reduce unnecessary energy usage. However, new research suggests that smart homes might not be as efficient as non-automated homes. A more recent study has indicated that, while monitoring and adjusting consumption levels do decrease unnecessary energy use, this process requires monitoring systems that also consume a significant amount of energy. This study suggested that the energy required to run these systems is so much so that it negates any benefits of the systems themselves, resulting in little to no ecological benefit.
Convertibility and turnaround time
Another major shift in automation is the increased demand for
flexibility
Stiffness is the extent to which an object resists deformation in response to an applied force.
The complementary concept is flexibility or pliability: the more flexible an object is, the less stiff it is.
Calculations
The stiffness, k, of a bo ...
and
convertibility
Convertibility is the quality that allows money or other financial instruments to be converted into other liquid stores of value. Convertibility is an important factor in international trade, where instruments valued in different currencies mus ...
in
manufacturing processes
Manufacturing is the creation or production of goods with the help of equipment, labor, machines, tools, and chemical or biological processing or formulation. It is the essence of secondary sector of the economy. The term may refer to a rang ...
. Manufacturers are increasingly demanding the ability to easily switch from manufacturing Product A to manufacturing Product B without having to completely rebuild the
production line
A production line is a set of sequential operations established in a factory where components are assembled to make a finished article or where materials are put through a refining process to produce an end-product that is suitable for onward c ...
s. Flexibility and distributed processes have led to the introduction of
Automated Guided Vehicles with Natural Features Navigation.
Digital electronics helped too. Former analog-based
instrumentation
Instrumentation a collective term for measuring instruments that are used for indicating, measuring and recording physical quantities. The term has its origins in the art and science of scientific instrument-making.
Instrumentation can refer to ...
was replaced by digital equivalents which can be more accurate and flexible, and offer greater scope for more sophisticated
configuration,
parametrization, and operation. This was accompanied by the
fieldbus
Fieldbus is the name of a family of industrial computer networks used for real-time distributed control. Fieldbus profiles are standardized by the
International Electrotechnical Commission (IEC) as IEC 61784/61158.
A complex automated industrial ...
revolution which provided a networked (i.e. a single cable) means of communicating between control systems and field-level instrumentation, eliminating hard-wiring.
Discrete manufacturing
Discrete manufacturing is the production of distinct items. Automobiles, furniture, toys, smartphones, and aeroplanes are examples of discrete manufacturing products. The resulting products are easily identifiable and differ greatly from process ...
plants adopted these technologies fast. The more conservative process industries with their longer plant life cycles have been slower to adopt and analog-based measurement and control still dominate. The growing use of
Industrial Ethernet
Industrial Ethernet (IE) is the use of Ethernet in an industrial environment with protocols that provide determinism and real-time control. Protocols for industrial Ethernet include EtherCAT, EtherNet/IP, PROFINET, POWERLINK, SERCOS III, CC ...
on the factory floor is pushing these trends still further, enabling manufacturing plants to be integrated more tightly within the enterprise, via the internet if necessary. Global competition has also increased demand for
Reconfigurable Manufacturing Systems.
Automation tools
Engineers can now have
numerical control over automated devices. The result has been a rapidly expanding range of applications and human activities.
Computer-aided technologies
Computer-aided technologies (CAx) is the use of computer technology to aid in the design, analysis, and manufacture of products.
Advanced CAx tools merge many different aspects of the product lifecycle management (PLM), including design, finite ...
(or CAx) now serve as the basis for mathematical and organizational tools used to create complex systems. Notable examples of CAx include
computer-aided design (CAD software) and
computer-aided manufacturing
Computer-aided manufacturing (CAM) also known as computer-aided modeling or computer-aided machining is the use of software to control machine tools in the manufacturing of work pieces. This is not the only definition for CAM, but it is the most ...
(CAM software). The improved design, analysis, and manufacture of products enabled by CAx has been beneficial for industry.
Information technology
Information technology (IT) is the use of computers to create, process, store, retrieve, and exchange all kinds of Data (computing), data . and information. IT forms part of information and communications technology (ICT). An information te ...
, together with
industrial machinery
The following outline is provided as an overview of and topical guide to industrial machinery:
Essence of industrial machinery
* Heavy equipment
* Hardware
* Industrial process
* Machine
* Machine tool
* Tool
Industrial machines
* Agricul ...
and
process
A process is a series or set of activities that interact to produce a result; it may occur once-only or be recurrent or periodic.
Things called a process include:
Business and management
*Business process, activities that produce a specific se ...
es, can assist in the design, implementation, and monitoring of control systems. One example of an
industrial control system
An industrial control system (ICS) is an electronic control system and associated instrumentation used for industrial process control. Control systems can range in size from a few modular panel-mounted controllers to large interconnected and in ...
is a
programmable logic controller (PLC). PLCs are specialized hardened computers which are frequently used to synchronize the flow of inputs from (physical)
sensors and events with the flow of outputs to actuators and events.
[
]
Human-machine interface
In the industrial design field of human–computer interaction, a user interface (UI) is the space where interactions between humans and machines occur. The goal of this interaction is to allow effective operation and control of the machine fr ...
s (HMI) or
computer human interfaces (CHI), formerly known as ''man-machine interfaces'', are usually employed to communicate with PLCs and other computers. Service personnel who monitor and control through HMIs can be called by different names. In the industrial process and manufacturing environments, they are called operators or something similar. In boiler houses and central utility departments, they are called ''stationary engineers''.
Different types of automation tools exist:
* ANN –
Artificial Neural Network
Artificial neural networks (ANNs), usually simply called neural networks (NNs) or neural nets, are computing systems inspired by the biological neural networks that constitute animal brains.
An ANN is based on a collection of connected unit ...
* DCS –
Distributed Control System
A distributed control system (DCS) is a computerised control system for a process or plant usually with many control loops, in which autonomous controllers are distributed throughout the system, but there is no central operator supervisory contro ...
* HMI –
Human Machine Interface
In the industrial design field of human–computer interaction, a user interface (UI) is the space where interactions between humans and machines occur. The goal of this interaction is to allow effective operation and control of the machine fr ...
* RPA –
Robotic Process Automation
Robotic process automation (RPA) is a form of business process automation technology based on metaphorical software robots (bots) or on artificial intelligence (AI)/digital workers. It is sometimes referred to as ''software robotics'' (not to be ...
* SCADA –
Supervisory Control and Data Acquisition
* PLC –
Programmable Logic Controller
*
Instrumentation
Instrumentation a collective term for measuring instruments that are used for indicating, measuring and recording physical quantities. The term has its origins in the art and science of scientific instrument-making.
Instrumentation can refer to ...
*
Motion control
Motion control is a sub-field of automation, encompassing the systems or sub-systems involved in moving parts of machines in a controlled manner. Motion control systems are extensively used in a variety of fields for automation purposes, includi ...
*
Robotics
Robotics is an interdisciplinary branch of computer science and engineering. Robotics involves design, construction, operation, and use of robots. The goal of robotics is to design machines that can help and assist humans. Robotics integrate ...
Host
simulation software
Simulation software is based on the process of modeling a real phenomenon with a set of mathematical formulas. It is, essentially, a program that allows the user to observe an operation through simulation without actually performing that operation ...
(HSS) is a commonly used testing tool that is used to test the equipment software. HSS is used to test equipment performance concerning factory automation standards (timeouts, response time, processing time).
Cognitive automation
Cognitive automation, as a subset of AI, is an emerging genus of automation enabled by
cognitive computing
Cognitive computing (CC) refers to technology platforms that, broadly speaking, are based on the scientific disciplines of artificial intelligence and signal processing. These platforms encompass machine learning, reasoning, natural languag ...
. Its primary concern is the automation of clerical tasks and workflows that consist of structuring
unstructured data
Unstructured data (or unstructured information) is information that either does not have a pre-defined data model or is not organized in a pre-defined manner. Unstructured information is typically text-heavy, but may contain data such as dates, num ...
. Cognitive automation relies on multiple disciplines:
natural language processing,
real-time computing
Real-time computing (RTC) is the computer science term for hardware and software systems subject to a "real-time constraint", for example from event to system response. Real-time programs must guarantee response within specified time constra ...
,
machine learning algorithms
The following outline is provided as an overview of and topical guide to machine learning. Machine learning is a subfield of soft computing within computer science that evolved from the study of pattern recognition and computational learning ...
,
big data analytics
Though used sometimes loosely partly because of a lack of formal definition, the interpretation that seems to best describe Big data is the one associated with large body of information that we could not comprehend when used only in smaller am ...
, and
evidence-based learning
Evidence-based education (EBE) is the principle that education practices should be based on the best available scientific evidence, rather than tradition, personal judgement, or other influences. Evidence-based education is related to evidence-base ...
.
According to
Deloitte
Deloitte Touche Tohmatsu Limited (), commonly referred to as Deloitte, is an international professional services network headquartered in London, England. Deloitte is the largest professional services network by revenue and number of professio ...
, cognitive automation enables the replication of human tasks and judgment "at rapid speeds and considerable scale." Such tasks include:
*
Document redaction
*
Data extraction
Data extraction is the act or process of retrieving data out of (usually unstructured or poorly structured) data sources for further data processing or data storage ( data migration). The import into the intermediate extracting system is thus usua ...
and document synthesis / reporting
*
Contract management Contract management or contract administration is the management of contracts made with customers, vendors, partners, or employees. Contract management includes negotiating the terms and conditions in contracts and ensuring compliance with the terms ...
*
Natural language search
* Customer, employee, and
stakeholder onboarding
''Onboarding'' or organizational socialization is the mechanism through which new employees acquire the necessary knowledge, skills, and behaviors in order to become effective organizational members and insiders. In the United States, for example ...
* Manual activities and verifications
* Follow-up and email communications
Recent and emerging applications
Automated power production
Technologies like
solar panels,
wind turbines
A wind turbine is a device that converts the kinetic energy of wind into electrical energy. Hundreds of thousands of large turbines, in installations known as wind farms, now generate over 650 gigawatts of power, with 60 GW added each year. Wi ...
, and other
renewable energy sources—together with
smart grids,
micro-grids,
battery storage
A battery storage power station is a type of energy storage power station that uses a group of batteries to store electrical energy. Battery storage is the fastest responding dispatchable source of power on electric grids, and it is used to stab ...
—can automate power production.
Retail
Many
supermarkets and even smaller stores are rapidly introducing
self-checkout
Self-checkouts (SCOs), also known as assisted checkouts (ACOs) or self-service checkouts, are machines that provide a mechanism for customers to complete their own transaction from a retailer without needing a traditional staffed checkout. When ...
systems reducing the need for employing checkout workers. In the U.S., the retail industry employs 15.9 million people as of 2017 (around 1 in 9 Americans in the workforce). Globally, an estimated 192 million workers could be affected by automation according to research by
Eurasia Group
Eurasia Group is a political risk consultancy founded in 1998 by Ian Bremmer.
History
Eurasia Group reports on emerging markets including frontier and developed economies, in addition to establishing practices focused on geo-technology and ener ...
.
Online shopping
Online shopping is a form of electronic commerce which allows consumers to directly buy goods or services from a seller over the Internet using a web browser or a mobile app. Consumers find a product of interest by visiting the website of the ...
could be considered a form of automated retail as the payment and checkout are through an automated
online transaction processing In online transaction processing (OLTP), information systems typically facilitate and manage transaction-oriented applications. This is contrasted with online analytical processing.
The term "transaction" can have two different meanings, both of w ...
system, with the share of online retail accounting jumping from 5.1% in 2011 to 8.3% in 2016. However, two-thirds of books, music, and films are now purchased online. In addition, automation and online shopping could reduce demands for shopping malls, and retail property, which in the USA is currently estimated to account for 31% of all commercial property or around .
Amazon
Amazon most often refers to:
* Amazons, a tribe of female warriors in Greek mythology
* Amazon rainforest, a rainforest covering most of the Amazon basin
* Amazon River, in South America
* Amazon (company), an American multinational technolog ...
has gained much of the growth in recent years for online shopping, accounting for half of the growth in online retail in 2016.
Other forms of automation can also be an integral part of online shopping, for example, the deployment of automated warehouse robotics such as that applied by
Amazon
Amazon most often refers to:
* Amazons, a tribe of female warriors in Greek mythology
* Amazon rainforest, a rainforest covering most of the Amazon basin
* Amazon River, in South America
* Amazon (company), an American multinational technolog ...
using
Kiva Systems.
Food and drink
![Factory Automation Robotics Palettizing Bread](https://upload.wikimedia.org/wikipedia/commons/2/22/Factory_Automation_Robotics_Palettizing_Bread.jpg)
The food retail industry has started to apply automation to the ordering process;
McDonald's
McDonald's Corporation is an American multinational fast food chain, founded in 1940 as a restaurant operated by Richard and Maurice McDonald, in San Bernardino, California, United States. They rechristened their business as a hambur ...
has introduced touch screen ordering and payment systems in many of its restaurants, reducing the need for as many cashier employees.
The University of Texas at Austin
The University of Texas at Austin (UT Austin, UT, or Texas) is a public research university in Austin, Texas. It was founded in 1883 and is the oldest institution in the University of Texas System. With 40,916 undergraduate students, 11,075 ...
has introduced fully automated cafe retail locations. Some Cafes and restaurants have utilized mobile and tablet "
apps" to make the ordering process more efficient by customers ordering and paying on their device. Some restaurants have automated food delivery to tables of customers using a
Conveyor belt system. The use of
robots "\n\n\n\n\nThe robots exclusion standard, also known as the robots exclusion protocol or simply robots.txt, is a standard used by websites to indicate to visiting web crawlers and other web robots which portions of the site they are allowed to visi ...
is sometimes employed to replace
waiting staff
Waiting staff (British English), waitstaff (North American English), waiters (male) / waitresses (female), or servers (North American English), are those who work at a restaurant, a diner, or a bar and sometimes in private homes, attendi ...
.
Construction
Mining
Automated mining involves the removal of human labor from the
mining
Mining is the extraction of valuable minerals or other geological materials from the Earth, usually from an ore body, lode, vein, seam, reef, or placer deposit. The exploitation of these deposits for raw material is based on the economic ...
process. The
mining industry
Mining is the extraction of valuable minerals or other geological materials from the Earth, usually from an ore body, lode, vein, seam, reef, or placer deposit. The exploitation of these deposits for raw material is based on the economic via ...
is currently in the transition towards automation. Currently, it can still require a large amount of
human capital, particularly in the
third world
The term "Third World" arose during the Cold War to define countries that remained non-aligned with either NATO or the Warsaw Pact. The United States, Canada, Japan, South Korea, Western European nations and their allies represented the " First ...
where labor costs are low so there is less incentive for increasing efficiency through automation.
Video surveillance
The Defense Advanced Research Projects Agency (
DARPA
The Defense Advanced Research Projects Agency (DARPA) is a research and development agency of the United States Department of Defense responsible for the development of emerging technologies for use by the military.
Originally known as the Ad ...
) started the research and development of automated visual
surveillance and monitoring (VSAM) program, between 1997 and 1999, and airborne video surveillance (AVS) programs, from 1998 to 2002. Currently, there is a major effort underway in the vision community to develop a fully-automated
tracking surveillance system. Automated video surveillance monitors people and vehicles in real-time within a busy environment. Existing automated surveillance systems are based on the environment they are primarily designed to observe, i.e., indoor, outdoor or airborne, the number of sensors that the automated system can handle and the mobility of sensors, i.e., stationary camera vs. mobile camera. The purpose of a surveillance system is to record properties and trajectories of objects in a given area, generate warnings or notify the designated authorities in case of occurrence of particular events.
Highway systems
As demands for safety and mobility have grown and technological possibilities have multiplied, interest in automation has grown. Seeking to accelerate the development and introduction of fully automated vehicles and highways, the
U.S. Congress
The United States Congress is the legislature of the federal government of the United States. It is bicameral, composed of a lower body, the House of Representatives, and an upper body, the Senate. It meets in the U.S. Capitol in Washin ...
authorized more than $650 million over six years for
intelligent transport systems (ITS) and demonstration projects in the 1991 ''
Intermodal Surface Transportation Efficiency Act
The Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA, pronounced ''Ice-Tea'') is a United States federal law that posed a major change to transportation planning and policy, as the first U.S. federal legislation on the subject in ...
'' (ISTEA). Congress legislated in ISTEA that:
e Secretary of Transportation shall develop an automated highway and vehicle prototype from which future fully automated intelligent vehicle-highway systems can be developed. Such development shall include research in human factors to ensure the success of the man-machine relationship. The goal of this program is to have the first fully automated highway roadway or an automated test track in operation by 1997. This system shall accommodate the installation of equipment in new and existing motor vehicles.
Full automation commonly defined as requiring no control or very limited control by the driver; such automation would be accomplished through a combination of sensor, computer, and communications systems in vehicles and along the roadway. Fully automated driving would, in theory, allow closer vehicle spacing and higher speeds, which could enhance traffic capacity in places where additional road building is physically impossible, politically unacceptable, or prohibitively expensive. Automated controls also might enhance road safety by reducing the opportunity for driver error, which causes a large share of motor vehicle crashes. Other potential benefits include improved air quality (as a result of more-efficient traffic flows), increased fuel economy, and spin-off technologies generated during research and development related to automated highway systems.
Waste management
Automated waste collection trucks prevent the need for as many workers as well as easing the level of labor required to provide the service.
Business process
Business process automation (BPA) is the technology-enabled automation of complex
business process
A business process, business method or business function is a collection of related, structured activities or tasks by people or equipment in which a specific sequence produces a service or product (serves a particular business goal) for a parti ...
es. It can help to streamline a business for simplicity, achieve
digital transformation
Digital transformation is the adoption of digital technology by an organization to digitize non-digital products, services or operations. The goal for its implementation is to increase value through innovation, invention, customer experience or e ...
, increase
service quality Service quality (SQ), in its contemporary conceptualisation, is a comparison of perceived expectations (E) of a service with perceived performance (P), giving rise to the equation SQ=P-E. This conceptualistion of service quality has its origins in ...
, improve service delivery or contain costs. BPA consists of integrating applications, restructuring labor resources and using software applications throughout the organization.
Robotic process automation
Robotic process automation (RPA) is a form of business process automation technology based on metaphorical software robots (bots) or on artificial intelligence (AI)/digital workers. It is sometimes referred to as ''software robotics'' (not to be ...
(RPA; or RPAAI for self-guided RPA 2.0) is an emerging field within BPA and uses AI. BPAs can be implemented in a number of business areas including marketing, sales and workflow.
Home
Home automation (also called domotics) designates an emerging practice of increased automation of household appliances and features in residential dwellings, particularly through electronic means that allow for things impracticable, overly expensive or simply not possible in recent past decades. The rise in the usage of home automation solutions has taken a turn reflecting the increased dependency of people on such automation solutions. However, the increased comfort that gets added through these automation solutions is remarkable.
Laboratory
![GammaGIF](https://upload.wikimedia.org/wikipedia/commons/b/b8/GammaGIF.gif)
Automation is essential for many scientific and clinical applications. Therefore, automation has been extensively employed in laboratories. From as early as 1980 fully automated laboratories have already been working. However, automation has not become widespread in laboratories due to its high cost. This may change with the ability of integrating low-cost devices with standard laboratory equipment.
Autosampler
An autosampler is commonly a device that is coupled to an analytical instrument providing samples periodically for analysis. An autosampler can also be understood as a device that collects samples periodically from a large sample source, like the ...
s are common devices used in laboratory automation.
Logistics automation
Logistics automation is the application of
computer software
Software is a set of computer programs and associated documentation and data. This is in contrast to hardware, from which the system is built and which actually performs the work.
At the lowest programming level, executable code consists ...
or automated machinery to improve the efficiency of
logistics
Logistics is generally the detailed organization and implementation of a complex operation. In a general business sense, logistics manages the flow of goods between the point of origin and the point of consumption to meet the requirements of ...
operations. Typically this refers to operations within a
warehouse
A warehouse is a building for storing goods. Warehouses are used by manufacturers, importers, exporters, wholesalers, transport businesses, customs, etc. They are usually large plain buildings in industrial parks on the outskirts of cities ...
or
distribution center
A distribution center for a set of products is a warehouse or other specialized building, often with refrigeration or air conditioning, which is stocked with products (goods) to be redistributed to retailers, to wholesalers, or directly to co ...
, with broader tasks undertaken by
supply chain engineering systems and
enterprise resource planning
Enterprise resource planning (ERP) is the integrated management of main business processes, often in real time and mediated by software and technology. ERP is usually referred to as a category of business management software—typically a sui ...
systems.
Industrial automation
Industrial automation deals primarily with the automation of
manufacturing
Manufacturing is the creation or production of goods with the help of equipment, labor, machines, tools, and chemical or biological processing or formulation. It is the essence of secondary sector of the economy. The term may refer to ...
,
quality control, and
material handling
Material handling involves short-distance movement within the confines of a building or between a building and a transportation vehicle. It uses a wide range of manual, semi-automated, and automated equipment and includes consideration of the pro ...
processes. General-purpose controllers for industrial processes include
programmable logic controllers,
stand-alone I/O modules, and computers. Industrial automation is to replace the human action and manual command-response activities with the use of mechanized equipment and logical programming commands. One trend is increased use of
machine vision
Machine vision (MV) is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to ...
to provide automatic inspection and robot guidance functions, another is a continuing increase in the use of robots. Industrial automation is simply required in industries.
Energy efficiency
Energy efficiency may refer to:
* Energy efficiency (physics), the ratio between the useful output and input of an energy conversion process
** Electrical efficiency, useful power output per electrical power consumed
** Mechanical efficiency, a ra ...
in
industrial processes
Industrial processes are procedures involving chemical, physical, electrical or mechanical steps to aid in the manufacturing of an item or items, usually carried out on a very large scale. Industrial processes are the key components of heavy ind ...
has become a higher priority.
Semiconductor
A semiconductor is a material which has an electrical conductivity value falling between that of a conductor, such as copper, and an insulator, such as glass. Its resistivity falls as its temperature rises; metals behave in the opposite way. ...
companies like
Infineon Technologies
Infineon Technologies AG is a German semiconductor manufacturer founded in 1999, when the semiconductor operations of the former parent company Siemens AG were spun off. Infineon has about 50,280 employees and is one of the ten largest semicon ...
are offering
8-bit micro-controller applications for example found in
motor controls,
general purpose pumps, fans, and
ebike
An electric bicycle (e-bike, eBike, etc.) is a motorized bicycle with an integrated electric motor used to assist propulsion. Many kinds of e-bikes are available worldwide, but they generally fall into two broad categories: bikes that assis ...
s to reduce
energy consumption and thus increase efficiency.
Industrial Automation and Industry 4.0
The rise of industrial automation is directly tied to the “
Fourth Industrial Revolution
The Fourth Industrial Revolution, 4IR, or Industry 4.0, conceptualizes rapid change to technology, industries, and societal patterns and processes in the 21st century due to increasing interconnectivity and smart automation. The term has bee ...
”, which is better known now as Industry 4.0. Originating from Germany, Industry 4.0 encompasses numerous devices, concepts, and machines,
as well as the advancement of the
industrial internet of things
The industrial internet of things (IIoT) refers to interconnected sensors, instruments, and other devices networked together with computers' industrial applications, including manufacturing and energy management. This connectivity allows for data ...
(IIoT). An "
Internet of Things is a seamless integration of diverse physical objects in the Internet through a virtual representation." These new revolutionary advancements have drawn attention to the world of automation in an entirely new light and shown ways for it to grow to increase productivity and efficiency in machinery and manufacturing facilities. Industry 4.0 works with the IIoT and software/hardware to connect in a way that (through
communication technologies) add enhancements and improve manufacturing processes. Being able to create smarter, safer, and more advanced manufacturing is now possible with these new technologies. It opens up a manufacturing platform that is more reliable, consistent, and efficient than before. Implementation of systems such as
SCADA is an example of software that takes place in Industrial Automation today. SCADA is a supervisory data collection software, just one of the many used in Industrial Automation. Industry 4.0 vastly covers many areas in manufacturing and will continue to do so as time goes on.
Industrial robotics
Industrial robotics
An industrial robot is a robot system used for manufacturing. Industrial robots are automated, programmable and capable of movement on three or more axes.
Typical applications of robots include welding, painting, assembly, disassembly, pick ...
is a sub-branch in industrial automation that aids in various manufacturing processes. Such manufacturing processes include machining, welding, painting, assembling and material handling to name a few. Industrial robots use various mechanical, electrical as well as software systems to allow for high precision, accuracy and speed that far exceed any human performance. The birth of industrial robots came shortly after World War II as the U.S. saw the need for a quicker way to produce industrial and consumer goods. Servos, digital logic and solid-state electronics allowed engineers to build better and faster systems and over time these systems were improved and revised to the point where a single robot is capable of running 24 hours a day with little or no maintenance. In 1997, there were 700,000 industrial robots in use, the number has risen to 1.8M in 2017 In recent years, AI with
robotics
Robotics is an interdisciplinary branch of computer science and engineering. Robotics involves design, construction, operation, and use of robots. The goal of robotics is to design machines that can help and assist humans. Robotics integrate ...
is also used in creating an automatic labeling solution, using robotic arms as the automatic label applicator, and AI for learning and detecting the products to be labelled.
Programmable Logic Controllers
Industrial automation incorporates programmable logic controllers in the manufacturing process.
Programmable logic controllers (PLCs) use a processing system which allows for variation of controls of inputs and outputs using simple programming. PLCs make use of programmable memory, storing instructions and functions like logic, sequencing, timing, counting, etc. Using a logic-based language, a PLC can receive a variety of inputs and return a variety of logical outputs, the input devices being sensors and output devices being motors, valves, etc. PLCs are similar to computers, however, while computers are optimized for calculations, PLCs are optimized for control tasks and use in industrial environments. They are built so that only basic logic-based programming knowledge is needed and to handle vibrations, high temperatures, humidity, and noise. The greatest advantage PLCs offer is their flexibility. With the same basic controllers, a PLC can operate a range of different control systems. PLCs make it unnecessary to rewire a system to change the control system. This flexibility leads to a cost-effective system for complex and varied control systems.
PLCs can range from small "building brick" devices with tens of I/O in a housing integral with the processor, to large rack-mounted modular devices with a count of thousands of I/O, and which are often networked to other PLC and
SCADA systems.
They can be designed for multiple arrangements of digital and analog
inputs and outputs (I/O), extended temperature ranges, immunity to
electrical noise
In electronics, noise is an unwanted disturbance in an electrical signal.
Noise generated by electronic devices varies greatly as it is produced by several different effects.
In particular, noise is inherent in physics, and central to the ...
, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed-up or
non-volatile memory
Non-volatile memory (NVM) or non-volatile storage is a type of computer memory that can retain stored information even after power is removed. In contrast, volatile memory needs constant power in order to retain data.
Non-volatile memory typi ...
.
It was from the automotive industry in the USA that the PLC was born. Before the PLC, control, sequencing, and safety interlock logic for manufacturing automobiles was mainly composed of
relay
A relay
Electromechanical relay schematic showing a control coil, four pairs of normally open and one pair of normally closed contacts
An automotive-style miniature relay with the dust cover taken off
A relay is an electrically operated switch ...
s,
cam timer
A cam timer or drum sequencer is an electromechanical system for controlling a sequence of events automatically. It resembles a music box with movable pins, controlling electrical switches instead of musical notes.
Description
An electric moto ...
s,
drum sequencers, and dedicated closed-loop controllers. Since these could number in the hundreds or even thousands, the process for updating such facilities for the yearly model
change-over was very time-consuming and expensive, as
electrician
An electrician is a tradesperson specializing in electrical wiring of buildings, transmission lines, stationary machines, and related equipment. Electricians may be employed in the installation of new electrical components or the maintenance ...
s needed to individually rewire the relays to change their operational characteristics.
When digital computers became available, being general-purpose programmable devices, they were soon applied to control sequential and combinatorial logic in industrial processes. However, these early computers required specialist programmers and stringent operating environmental control for temperature, cleanliness, and power quality. To meet these challenges, the PLC was developed with several key attributes. It would tolerate the shop-floor environment, it would support discrete (bit-form) input and output in an easily extensible manner, it would not require years of training to use, and it would permit its operation to be monitored. Since many industrial processes have timescales easily addressed by millisecond response times, modern (fast, small, reliable) electronics greatly facilitate building reliable controllers, and performance could be traded off for reliability.
[E. A. Parr, ''Industrial Control Handbook'', Industrial Press Inc., 1999 ]
Agent-assisted automation
Agent-assisted automation refers to automation used by call center agents to handle customer inquiries. The key benefit of agent-assisted automation is compliance and error-proofing. Agents are sometimes not fully trained or they forget or ignore key steps in the process. The use of automation ensures that what is supposed to happen on the call actually does, every time. There are two basic types: desktop automation and automated voice solutions.
Desktop automation refers to
software programming
Computer programming is the process of performing a particular computation (or more generally, accomplishing a specific computing result), usually by designing and building an executable computer program. Programming involves tasks such as an ...
that makes it easier for the call center agent to work across multiple desktop tools. The automation would take the information entered into one tool and populate it across the others so it did not have to be entered more than once, for example.
Automated voice solutions allow the agents to remain on the line while disclosures and other important information is provided to customers in the form of pre-recorded audio files. Specialized applications of these automated voice solutions enable the agents to process
credit card
A credit card is a payment card issued to users (cardholders) to enable the cardholder to pay a merchant for goods and services based on the cardholder's accrued debt (i.e., promise to the card issuer to pay them for the amounts plus the o ...
s without ever seeing or hearing the
credit card number
A payment card number, primary account number (PAN), or simply a card number, is the card identifier found on payment cards, such as credit cards and debit cards, as well as stored-value cards, gift cards and other similar cards. In some situati ...
s or
CVV codes.
See also
*
Automated storage and retrieval system
*
Automation technician
*
Cognitive computing
Cognitive computing (CC) refers to technology platforms that, broadly speaking, are based on the scientific disciplines of artificial intelligence and signal processing. These platforms encompass machine learning, reasoning, natural languag ...
*
Control engineering
Control engineering or control systems engineering is an engineering discipline that deals with control systems, applying control theory to design equipment and systems with desired behaviors in control environments. The discipline of controls o ...
*
Cybernetics
*
Critique of work
Critique of work or critique of labour is the critique of, and wish to abolish, work ''as such'', and to critique what the critics of works deem wage slavery.
Critique of work can be existential, and focus on how labour can be and/or feel meaning ...
*
Data-driven control system
Data-driven control systems are a broad family of control systems, in which the identification of the process model and/or the design of the controller are based entirely on ''experimental data'' collected from the plant.
In many control applicati ...
*
Dirty, dangerous and demeaning
"Dirty, dangerous and demeaning" (often "dirty, dangerous and demanding" or "dirty, dangerous and difficult"), also known as the 3Ds, is an American neologism derived from the Asian concept, and refers to certain kinds of labor often performed by ...
*
Feedforward control
A feed forward (sometimes written feedforward) is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command ...
*
Futures studies
Futures studies, futures research, futurism or futurology is the systematic, interdisciplinary and holistic study of social and technological advancement, and other environmental trends, often for the purpose of exploring how people will l ...
*
Industrial Revolution
The Industrial Revolution was the transition to new manufacturing processes in Great Britain, continental Europe, and the United States, that occurred during the period from around 1760 to about 1820–1840. This transition included going f ...
*
Machine to machine Machine to machine (M2M) is direct communication between devices using any communications channel, including wired and wireless.
Machine to machine communication can include industrial instrumentation, enabling a sensor or meter to communicate th ...
*
Mobile manipulator
A mobile manipulator is a robot system built from a robotic manipulator arm mounted on a mobile platform. Such systems unite the advantages of mobile platforms and robotic manipulator arms and reduce their drawbacks. For instance, the mobile platf ...
*
Multi-agent system
A multi-agent system (MAS or "self-organized system") is a computerized system composed of multiple interacting intelligent agents.Hu, J.; Bhowmick, P.; Jang, I.; Arvin, F.; Lanzon, A.,A Decentralized Cluster Formation Containment Framework f ...
*
Post-work society
In futurology, political science, and science fiction, a post-work society is a society in which the nature of work has been radically transformed.
Some post-work theorists imagine the complete automation of all jobs, or at least the takeover of ...
*
Process control
*
Productivity improving technologies The productivity-improving technologies are the technological innovations that have historically increased productivity.
Productivity is often measured as the ratio of (aggregate) output to (aggregate) input in the production of goods and services. ...
*
Robot tax
A robot tax is a legislative strategy to disincentivize the replacement of workers by machines and bolster the social safety net for those who are displaced. While the automation of manual labour has been contemplated since before the industrial r ...
*
Robotic process automation
Robotic process automation (RPA) is a form of business process automation technology based on metaphorical software robots (bots) or on artificial intelligence (AI)/digital workers. It is sometimes referred to as ''software robotics'' (not to be ...
*
Semi-automation
Semi-automation is a process or procedure that is performed by the combined activities of man and machine with both human and machine steps typically orchestrated by a centralized computer controller.
Within manufacturing, production processes ma ...
*
Industry 4.0
The Fourth Industrial Revolution, 4IR, or Industry 4.0, conceptualizes rapid change to technology, industries, and societal patterns and processes in the 21st century due to increasing interconnectivity and smart automation. The term has bee ...
*
Technological unemployment
Technological unemployment is the loss of jobs caused by technological change. It is a key type of structural unemployment.
Technological change typically includes the introduction of labour-saving "mechanical-muscle" machines or more efficie ...
References
Citations
Sources
*
*
*
* E. McGaughey, 'Will Robots Automate Your Job Away? Full Employment, Basic Income, and Economic Democracy' (2018
SSRN, part 2(3)*
*
*
* Executive Office of the President, Artificial Intelligence, Automation and the Economy
December 2016
Further reading
* Acemoglu, Daron, and Pascual Restrepo. “Automation and New Tasks: How Technology Displaces and Reinstates Labor.” The Journal of Economic Perspectives, vol. 33, no. 2,
American Economic Association, 2019, pp. 3–30, .
* Norton, Andrew. Automation and Inequality: The Changing World of Work in the Global South.
International Institute for Environment and Development
International is an adjective (also used as a noun) meaning "between nations".
International may also refer to:
Music Albums
* ''International'' (Kevin Michael album), 2011
* ''International'' (New Order album), 2002
* ''International'' (The T ...
, 2017, .
* Danaher, John. “The Case for Technological Unemployment.” Automation and Utopia: Human Flourishing in a World without Work,
Harvard University Press
Harvard University Press (HUP) is a publishing house established on January 13, 1913, as a division of Harvard University, and focused on academic publishing. It is a member of the Association of American University Presses. After the retir ...
, 2019, pp. 25–52, .
* Reinsch, William, and Jack Caporal. “The Digital Economy & Data Governance.” Key Trends in the Global Economy through 2030, edited by Matthew P. Goodman and Scott Miller,
Center for Strategic and International Studies
The Center for Strategic and International Studies (CSIS) is an American think tank based in Washington, D.C. CSIS was founded as the Center for Strategic and International Studies of Georgetown University in 1962. The center conducts polic ...
(CSIS), 2020, pp. 18–21, .
* Shiller, Robert J. “Automation and Artificial Intelligence Replace Almost All Jobs.” Narrative Economics: How Stories Go Viral and Drive Major Economic Events,
Princeton University Press
Princeton University Press is an independent publisher with close connections to Princeton University. Its mission is to disseminate scholarship within academia and society at large.
The press was founded by Whitney Darrow, with the financia ...
, 2019, pp. 196–211, .
* Wolf-Meyer, Matthew J. “The Revolutionary Horizons of Labor and Automation: Blue Collar and Player Piano.” Theory for the World to Come: Speculative Fiction and Apocalyptic Anthropology,
University of Minnesota Press
The University of Minnesota Press is a university press that is part of the University of Minnesota. It had annual revenues of just over $8 million in fiscal year 2018.
Founded in 1925, the University of Minnesota Press is best known for its boo ...
, 2019, pp. 41–50, .
* Dombalagian, Onnig H. “Automation.” Chasing the Tape: Information Law and Policy in Capital Markets, The
MIT Press
The MIT Press is a university press affiliated with the Massachusetts Institute of Technology (MIT) in Cambridge, Massachusetts (United States). It was established in 1962.
History
The MIT Press traces its origins back to 1926 when MIT publish ...
, 2015, pp. 163–78, .
* Diakopoulos, Nicholas. “HYBRIDIZATION: COMBINING ALGORITHMS, AUTOMATION, AND PEOPLE IN NEWSWORK.” Automating the News: How Algorithms Are Rewriting the Media,
Harvard University Press
Harvard University Press (HUP) is a publishing house established on January 13, 1913, as a division of Harvard University, and focused on academic publishing. It is a member of the Association of American University Presses. After the retir ...
, 2019, pp. 13–40, .
* HOLZER, HARRY J. “Automation, Jobs, and Wages: Should Workers Fear the New Automation?” Shifting Paradigms: Growth, Finance, Jobs, and Inequality in the Digital Economy, edited by ZIA QURESHI and CHEONSIK WOO,
Brookings Institution Press
The Brookings Institution, often stylized as simply Brookings, is an American research group founded in 1916. Located on Think Tank Row in Washington, D.C., the organization conducts research and education in the social sciences, primarily in e ...
, 2022, pp. 123–50, .
* CLAYPOOL, MOLLIE, JANE BURRY, JENNY SABIN, BOB SHEIL, and MARILENA SKAVARA. “TOWARDS DISCRETE AUTOMATION.” In Fabricate 2020: Making Resilient Architecture, 272–79.
UCL Press
, mottoeng = Let all come who by merit deserve the most reward
, established =
, type = Public research university
, endowment = £143 million (2020)
, budget = ...
, 2020. .
* TYSON, LAURA D., and Christine Lagarde. “Trade and Policy Adjustment to Automation Challenges.” Meeting Globalization’s Challenges: Policies to Make Trade Work for All, edited by LUÍS A. V. CATÃO and MAURICE OBSTFELD,
Princeton University Press
Princeton University Press is an independent publisher with close connections to Princeton University. Its mission is to disseminate scholarship within academia and society at large.
The press was founded by Whitney Darrow, with the financia ...
, 2019, pp. 229–36, .
* McAfee, Andrew, and Erik Brynjolfsson. “Human Work in the Robotic Future: Policy for the Age of Automation.” Foreign Affairs, vol. 95, no. 4,
Council on Foreign Relations, 2016, pp. 139–50, .
* FREY, CARL BENEDIKT. “ARTIFICIAL INTELLIGENCE.” The Technology Trap: Capital, Labor, and Power in the Age of Automation, Princeton University Press, 2019, pp. 301–41, .
* ATANASOSKI, NEDA, and KALINDI VORA. “Automation and the Invisible Service Function: Toward an ‘Artificial Artificial Intelligence.’” Surrogate Humanity: Race, Robots, and the Politics of Technological Futures,
Duke University Press
Duke University Press is an academic publisher and university press affiliated with Duke University. It was founded in 1921 by William T. Laprade as The Trinity College Press. (Duke University was initially called Trinity College). In 1926 D ...
, 2019, pp. 87–107, .
* BORRIE, JOHN. “Cold War Lessons for Automation in Nuclear Weapon Systems.” The Impact of Artificial Intelligence on Strategic Stability and Nuclear Risk: Volume I Euro-Atlantic Perspectives, edited by VINCENT BOULANIN,
Stockholm International Peace Research Institute, 2019, pp. 41–52, .
*
*
*
*
*
{{Authority control
Articles containing video clips