One model policy
Before the First World War Austin had produced a range of expensive cars including a 3.6-litre 20-hp car but, influenced by the manufacturing philosophy of Henry Ford,Massed motor-car production, first British example
Perhaps hoping to help ''The Times'' published a long item at the beginning of June 1920 in which they professed admiration for Austin's enterprise in launching on the British market "a car made on American lines". The result, they said, "is good but not of the class of the old 20-hp. It would have been wiser to have given the new car a new name. The whole finish is poor. The engine vibrates at anything over moderate speeds and sometimes at low speeds. It is difficult to access the power unit and the whole car is difficult to associate with the 10-hp and 15-hp, the famous 18-hp and the 20-hp which did so well in the 1914 Alpine Trials.Massed Motor-Car Production. ''The Times'', Saturday, Jun 12, 1920; pg. 11; Issue 42435. "However it is true the car is an excellent hill-climber, runs very quietly, accelerates rapidly and has very good steering. The (unfortunately) central gear change is good if a shade coarse. The wheel brakes worked by their side lever are excellent", but the transmission brake worked by the pedal was described as "indifferent". "The car holds the road well at any speed and the springing is good. The coachwork is comfortable enough but the open body is rather ugly". Summing up the motoring correspondent suggested that "if pains were taken to damp out engine vibration and a slightly higher price set which would allow more 'spit and polish'...Austin will do a lasting service to the country and to their shareholders".Receivership for Austin
The one-model policy was rapidly dropped in mid-1921 when Austin's company was placed in receivership. Six months later in November 1921 Austin launched his Austin Twelve, in many ways a scaled-down Twenty.Four-cylinder engine
The engine with its 95 mm bore and 127 mm stroke had a cast-iron cylinder block with detachable cylinder head mounted on top of an aluminium crankcase. It developed 45 bhp at 2000 rpm. As an advance on pre-war practice, the engine was directly bolted to the four-speed centre-change gearbox, which drove the rear wheels through an open propeller shaft.Chassis
The chassis, based on that of the Hudson, was conventional, with semi-elliptic leaf springs on all wheels and rigid axles front and rear. Wooden-spoked artillery-style wheels were fitted. Initially brakes were on the rear wheels, only but front wheel brakes were fitted as standard from 1925 and at the same time the wheels became steel-spoked.Body
At its 1919 introduction three body types were listed; a tourer, coupé and landaulette. These were joined in 1921 by the ''Ranelagh'' fixed head, two-door, coupé. For 1922 the ''Grosvenor'' limousine and landaulette, a ''Ranelagh'' four-door, fixed head, coupé and ''Westminster'' drop-head coupé were added. A 75 mph Sports variant was added in 1921 with a modified higher-compression engine and wire wheels, but it was very expensive, and only around 23 were sold. As well as the cars, a range of commercial vehicles was also built on the chassis. By the end of October 1921 Austin were able to advertise that 6,566 Austin Twenty cars were now on the road, 2,246 had so far been delivered during 1921, and that distributors and agents were showing unbounded confidence with their orders for Twenties and the new Austin Twelve, placing large contracts for 1922.20/6 Six-cylinder engine
New body October 1926
The car that was destined to succeed the Twenty, the six-cylinder 20/6, was announced at the October 1926 London Motor Show with production really starting in early 1928, and until 1930 the two different engines were sold alongside each other, but 1929 would be the last year of full production for what was now called the 20/4. There was a 12-volt electrical system for lighting and starting. Timing was at the back of the engine. From there on the off-side were driven in-line the generator, water-pump and magneto. Reported refinements for the 1929 Motor Show included: chromium-plated exterior fittings, '' Triplex'' glass, improved (dome type) "mud wings (front mudguards) and new gas (sic) and ignition control levers "neatly placed above the steering wheel". For 1930 the specification included '' Biflex'' magnetic dip and switch headlights and wire wheels.Chassis
The engine, clutch and gearbox, which was centrally controlled, all formed one assembly that was held in the frame by two brackets with a rubber-lined frame at the front. The rear axle was three-quarter floating.Steering
Steering is worm and worm wheel type. Beneath the hand wheel there is a convenient ring-operated horn switch.Brakes
Behind the gearbox there was a "locomotive" transmission brake operated by a hand lever on the off-side of the gear lever. The brake's shoes were to some extent self-adjusting but might be regulated by two hand screws. "This brake is intended to be more than just a parking brake". The four wheels had brakes operated by rods from the brake pedal. Compensation was made so that balance was preserved in the back and front sets of brakes. The application was partly taken by rods but finally by cables. The brake drums were enclosed and have outlets for water or oil. The front braking mechanism was simple, there was only one arm which had anchorage above the pivot pin and did not turn with the wheel. The cams were at the bottom of the drums and the steering pins were hollowed to allow the necessary expanding control.Suspension
The front and back springs were half-elliptical. At the back they were carried under the axle. Both sets had lubricating gaiters and shock absorbers. There was no camber to the forward springs. There were no stops behind the back shackles.Pricing
* Open Road tourer 4-cylinder £425 * Open Road tourer 6-cylinder £525 * Carlton saloon 4-cylinder £495 * Carlton saloon 6-cylinder £595 * Marlborough landaulette 4-cylinder £475 * Ranelagh limousine or landaulette 4-cylinder £575 * Ranelagh limousine or landaulette 6-cylinder £675Road test
Seats are comfortable. The speedometer only showed up to 60 mph, within the engine's capacity. No sign of overheating. Clutch satisfactory, lower gears much quieter than on previous Austins. Brakes suspension and steering were not at all bad but could be made better.New body August 1932
"A body design that makes this magnificent seven-seater even more than ever like a £1,000 car. Its streamline front, waistline moulding and petrol tank housing, all new, enhance its superb lines".Road test
This 7-seater limousine has four good doors and six side windows. Front seat is fixed as is unfortunately the windscreen but the screen is large and gives a good view. The back seat has three armrests. The occasional seats fold away neatly, give enough support to the back and knee and toe room is well arranged. Equipment includes such fittings as: two interior lights, five blinds, parcel net and ventilator in the roof, bag pockets on the doors. Upholstery in the rear is cord and in front is leather. There is a large cupboard to the left of the instruments. An amplifying telephone (to the driver) is provided. The gear lever has a catch for reverse and a quiet-second together with syncro-mesh is provided. There are just the four brakes which are applied by rods and cables by hand lever or by pedal. The half-elliptical springs have ''New body August 1934
"Clean-cut beauty in the modern trend". "Entirely new frontal design including a longer bonnet and new-shaped radiator and rear panelling". Syncromesh on all but first gear. Flush direction indicators with automatic return. Bumpers are fitted fore and aft. The spare wire wheel and its tyre are now carried in the boot and the luggage platform on the door can be swivelled to one side. Dip and switch of the headlamps is controlled by a foot button. The ''Jackall'' four-wheel hydraulic jacks, workable from inside the car, will raise all four wheels at once or the front and back ones in pairs. The brakes are of ''Girling'' type.Austin Motor Company Limited. Display ad. ''The Times'', Tuesday, 13 August 1935; pg. 23; Issue 47141Cars of To-Day. Austin Twenty, ''The Times'', 14 July 1936; pg. 8; Issue 47426Road test
The engine has been greatly improved in its running as to its smoothness and refinement probably due to the revised carburation. Syncromesh is often obstructive for second gear. The landaulette will do about 65 miles an hour in top gear. Price £650, landaulette and limousine. :Produced: * 1933— 629 * 1934— 491 * 1935— 555 * 1936— * 1937— 38028 Six-cylinder engine
New body July 1938
The last of the Austin range to be given Dick Burzi's new body shape it was announced twelve months after the entry into production of Austin's update of their Sixteen into their stubby-nosed Eighteen, a 50% more powerful engine in a longer-nosed (by 18 inches) body. The new body which only shared its general appearance with the smaller Eighteen was described as notable for its roominess and luxurious comfort. Generous seating with a flat unobstructed floor together with draught-free ventilation by sliding quarter windows, sound insulation for all the steel body panels and generous luggage accommodation were further new features. Equipment includes a reversing light. The price of the new Twenty-Eight was £700. Other improvements across the board included: pistol-grip handbrakes under the dashboard, increased luggage accommodation, piston-type hydraulic shock absorbers, more accessible batteries and a quick-filling petrol tank.Steering
Steering system was by '' Marles-Weller''.Brakes
Brakes were by '' Girling''.Suspension
Rigid axles back and front supported low-periodicity positively lubricated half-elliptical springs with hydraulic shock absorbers and jacks.New engine July 1938
The new 4-litre engine was announced to a gathering of Austin agents and distributors at Longbridge at the end of July 1938. The design with the alloy cylinder head having proved so successful on the Austin Fourteen it would now be applied across the range. It included a higher compression ratio, "upwards of 6 : 1" which in combination with the larger inlet valves improved fuel consumption and power output.Austin Car Programme:''The Scotsman''; 27 July 1938; The cylinder bore was increased by 7 mm from 79.35 to 86.36 mm lifting cubic capacity from 3.4-litres to 4-litres. The tax rating was increased from 23.42 to 27.75 but the power output went up from @2,600 rpm to a reported @3,200 rpm. The previous eight main bearing crankshaft was replaced with a four-bearing crankshaft fitted with a vibration damper which decision fitted with the then current trend. The new detachable aluminium alloy cylinder head was fitted over inclined side valves and anodised aluminium alloy pistons. Pressure lubrication was supplied to the tappets, coolant temperature was controlled by thermostat and coil ignition was provided with automatic advance.Road test
A new and roomy seven-seater which has much to recommend it including the price. Unusually good windows, long and fairly deep give a good view and enhance the appearance of the car. The cushions and shaped squabs are comfortable, the compartments are divided by sliding glass panels. There are folding foot rests, blinds to the division window, shaped armchair backs to the seat and a double arm rest in the centre. The occasional seats give reasonable comfort, the doorways behind are wide, the boot has two good-sized fitted suitcases with the spare wheel below and its platform is designed to take 1½ cwt of extra luggage. The new engine has the extra refinement in running noticeable in the other new Austin units and shows much improvement on the former Twenty. The horn button and the signalling lever are on the top of the thin three-spoked steering wheel. The brake lever is inverted and under the dash. Accessible it does not interfere with entrance and has a thumb-plate trigger. The greatest comfortable speed was 70 miles per hour.Stamina
In 2004 Martyn Nutland reported there were just two still in existence and some part of a third car.Martyn Nutland, ''Few Coronets, Few Kind Hearts'', Austin Times, 2004, Vol 2, Issue 4References
External links