|
Neepsend Engine Shed
Neepsend engine shed was an engine shed in Neepsend, Sheffield, South Yorkshire, England. It was built by the Sheffield, Ashton-under-Lyne and Manchester Railway to provide and service locomotives for passenger trains originating or changing at Sheffield Victoria and goods trains from various outlets within the area. The shed was built around 400 yards on the Sheffield side (southeast) of Neepsend railway station. The shed was situated on the north side of the line between Bardwell Road and Rutland Road. It began as a four road stone building with a double pitched slate roof. Extensions In 1850 the shed had the road nearest the main line extended through to give an alternative exit to the running lines, whilst the road furthest from the main lines could only be accessed from the turntable. This was also the engine repair road. By 1875 the shed had been doubled in length and the number of roads increased to 6. An extra bay was added to the north side, its design being such that i ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Motive Power Depot
The motive power depot (MPD) or locomotive depot, or traction maintenance depot (TMD), is the place where locomotives are usually housed, repaired and maintained when not being used. They were originally known as "running sheds", "engine sheds" or, for short, just sheds. Facilities are provided for refuelling and replenishing water, lubricating oil and grease and, for steam engines, disposal of the ash. There are often workshops for day to day repairs and maintenance, although locomotive building and major overhauls are usually carried out in the locomotive works. (Note: In American English, the term ''depot'' is used to refer to passenger stations or goods (freight) facilities and not to vehicle maintenance facilities.) German practice The equivalent of such depots in German-speaking countries is the ''Bahnbetriebswerk'' or ''Bw'' which has similar functions, with major repairs and overhauls being carried out at ''Ausbesserungswerke''. The number of these reduced drastic ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Transfer Table
A transfer table or traverser is a piece of railway equipment. It functions similarly to a turntable, although it cannot be used to turn vehicles around. Overview A transfer table, also known as a traverser, consists of a single length of track that can be moved from side to side, in a direction perpendicular to the track. There are often multiple tracks on one side of the table and a single or multiple track(s) on the other. Applications Yards They are often found in yards with locomotive maintenance facilities. The table allows a shed with multiple stalls for locomotives or carriages to be served by a single track, without the need for points that could take up a much larger area. [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Buildings And Structures Demolished In 1965
A building, or edifice, is an enclosed structure with a roof and walls standing more or less permanently in one place, such as a house or factory (although there's also portable buildings). Buildings come in a variety of sizes, shapes, and functions, and have been adapted throughout history for a wide number of factors, from building materials available, to weather conditions, land prices, ground conditions, specific uses, prestige, and aesthetic reasons. To better understand the term ''building'' compare the list of nonbuilding structures. Buildings serve several societal needs – primarily as shelter from weather, security, living space, privacy, to store belongings, and to comfortably live and work. A building as a shelter represents a physical division of the human habitat (a place of comfort and safety) and the ''outside'' (a place that at times may be harsh and harmful). Ever since the first cave paintings, buildings have also become objects or canvasses of much artistic ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Darnall Engine Shed
Darnall DMU Depot was a traction maintenance depot in Darnall, Sheffield, England. It was built by the London and North Eastern Railway to serve the Sheffield area, passenger trains originating or changing at Sheffield Victoria and goods and pilot workings. The shed was built adjacent to the main line immediately west of Darnall station. British Railways initially allocated the shed code 39B to Darnall, and later 41A, both within the Eastern Region code sequence. History Knowing that facilities at Neepsend were too cramped to operate efficiently the L.N.E.R. set about finding a suitable site for new facilities with easy access to their system in Sheffield. A site at Darnall was chosen and planning for the new engine shed commenced in 1936. Opening did not take place until 1943 with much machinery, due to wartime restrictions on new purchase, being brought from Neepsend. Photographs published in the "LNER Journal" showed the new facilities but, due to information restrictions ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
2-4-0
Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of two leading wheels on one axle, four powered and coupled driving wheels on two axles and no trailing wheels. The notation 2-4-0T indicates a tank locomotive of this wheel arrangement, on which its water and fuel is carried on board the engine itself, rather than in an attached tender. Overview The 2-4-0 configuration was developed in the United Kingdom in the late 1830s or early 1840s as an enlargement of the 2-2-0 and 2-2-2 types, with the additional pair of coupled wheels giving better adhesion. The type was initially designed for freight haulage. One of the earliest examples was the broad-gauge GWR Leo Class, designed by Daniel Gooch and built during 1841 and 1842 by R. & W. Hawthorn, Leslie and Company; Fenton, Murray and Jackson; and Rothwell, Hick and Rothwell. Because of its popularity for a period with English railways, noted railway author C. Hamilton Ellis ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Thomas Parker (engineer)
Thomas Parker (11 July 1829 – 25 November 1903)Thomas Parker (1829-1903) Grace's Guide, accessed 29 July 2015. was Locomotive, Carriage and Wagon Superintendent of the from 1886–1893. He introduced a new type of locomotive in Britain, which used a . Life Parker was born in |
4-4-0
4-4-0 is a locomotive type with a classification that uses the Whyte notation for the classification of steam locomotives by wheel arrangement and represents the arrangement: four leading wheels on two axles (usually in a leading bogie), four powered and coupled driving wheels on two axles, and a lack of trailing wheels. Due to the large number of the type that were produced and used in the United States, the 4-4-0 is most commonly known as the American type, but the type subsequently also became popular in the United Kingdom, where large numbers were produced.White, John H., Jr. (1968). ''A history of the American locomotive; its development: 1830-1880''. New York: Dover Publications, pp. 46-. Almost every major railroad that operated in North America in the first half of the 19th century owned and operated locomotives of this type. The first use of the name ''American'' to describe locomotives of this wheel arrangement was made by ''Railroad Gazette'' in April 1872. Prior to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Harry Pollitt (engineer)
Harry Pollitt (26 December 1865 – 23 January 1945) was an English railway engineer, who was Locomotive Engineer of the Manchester, Sheffield and Lincolnshire Railway from 1894 to 1897 and its successor, the Great Central Railway, from 1897 to 1900. Biography He was born on 26 December 1865 in Ashton-under-Lyne, Lancashire. His father was Sir William Pollitt, who became general manager of the Manchester, Sheffield and Lincolnshire Railway (MSLR) between 1866 and 1899. Harry Pollitt was appointed Locomotive Engineer of the MSLR from January 1894, replacing Thomas Parker, who resigned at the end of 1893. Pollitt had previously been Works Manager at the Gorton locomotive works of the MSLR, under Parker. In June 1894, his duties were expanded to cover the MSLR's fleet of ferries on the Humber, and his job title was changed to Locomotive & Marine Engineer. On 1 August 1897, the MSLR was renamed the Great Central Railway (GCR). Pollitt personally saw off the first GCR passenger s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Railway Turntable
In rail terminology, a railway turntable or wheelhouse is a device for turning railway rolling stock, usually locomotives, so that they can be moved back in the direction from which they came. Naturally, it is especially used in areas where economic considerations or a lack of sufficient space have served to weigh against the construction of a turnaround wye. In the case of steam locomotives, railways needed a way to turn the locomotives around for return trips as their controls were often not configured for extended periods of running in reverse and in many locomotives the top speed was lower in reverse motion. In the case of diesel locomotives, though most can be operated in either direction, they are treated as having "front ends" and "rear ends" (often determined by reference to the location of the crew cab). When operated as a single unit, the railway company often prefers, or requires, that a diesel locomotive is run "front end" first. When operated as part of a multiple ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Neepsend
Neepsend is a suburb of the city of Sheffield, it stands just north-west of the city centre. The main area of Neepsend covers the flood plain of the River Don from Lady's Bridge at the Wicker up to Hillfoot Bridge. The suburb falls within the Central Ward of the City. The adjacent district of Parkwood Springs is often regarded as part of the suburb. Etymology The origin of the word Neepsend is believed to come from the Old Norse language, with the word "nypr" meaning a peak, the "end" part was added as Neepsend lies in the Don valley at the termination of a high ridge which descends from Shirecliffe and over Parkwood. The morphology of the ridge was changed when an artificial ski slope was created to form the Sheffield Ski Village. The Concise Oxford Dictionary of Place Names gives the word "Nipa" as of Swedish and Norwegian origin and means a crag or steep river bank. In a 1297 subsidy roll the suburb was referred to as Nipisend and in 1637 as Nypysend. History There is n ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Neepsend Railway Station
Neepsend railway station was a railway station on the former Great Central Railway in England. History Neepsend railway station was opened on 1 July 1888 to serve the industrial suburb of Neepsend, to the north west of Sheffield city centre. It was situated on the Manchester, Sheffield and Lincolnshire Railway's (latterly the Great Central Railway) Woodhead line which connected Sheffield Victoria and Manchester London Road stations and was located to the northwest of Neepsend engine shed. There had been much local pressure over a long period of time to get a station at Neepsend; in December 1857 the mayor of Sheffield was told that it would be too expensive. Four years later, local activists were informed that their latest petition would be granted if they could raise £211, this being half the cost of providing the station. The building of the station was further delayed when a dispute arose about who should pay the cost of constructing a road bridge across the River Don to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sheffield Victoria Railway Station
Sheffield Victoria was the main railway station in Sheffield, Yorkshire, England, on the Great Central Railway, between Chesterfield and Penistone. History Early history Engineered by Joseph Locke, the Sheffield, Ashton-under-Lyne and Manchester Railway linking Manchester and Sheffield opened in 1845. Originally, this line terminated at the Bridgehouses station, which was about to the west of the future Victoria station. In 1847, the Sheffield, Ashton-under-Lyne and Manchester Railway merged with two other railway companies to form the Manchester, Sheffield and Lincolnshire Railway. The station at Bridgehouses had been outgrown, so an extension and new station were planned. John Fowler, who later gained fame for co-designing the Forth Railway Bridge in Scotland, was employed to engineer the extension and station. Fowler's design included a viaduct over the Wicker that was high, long and two island platforms long. The extension was completed in 1847–1848 and the new Vic ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
