|
Line Laser
A line laser is a device that employs a laser and an optical lens to project the laser beam as a line rather than a point (e.g. laser pointer). This may be achieved by passing the beam through a cylindrical lens or a Powell lens. Depending on the application, independent line lasers may be used to generate lines, or multiple line lasers may be used together to produce crosses or other composite patterns. In civil engineering and interior design, line lasers are used to assist in levelling building sites and structures. Multiple lines may be generated for use with image processing. Applications * Diffractive beam splitter * Calibration * Spirit level * David Laserscanner * Light section * Image processing An image is a visual representation of something. It can be two-dimensional, three-dimensional, or somehow otherwise feed into the visual system to convey information. An image can be an artifact, such as a photograph or other two-dimensiona ... * Machine vision * 3D sca ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Light Section
The light section is a technology for optical 3-D measurement, which makes the measurement of a height profile along a projected line of light. It is based on the principle of triangulation. References Laser applications {{measurement-stub ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Construction Surveying
Construction surveying or building surveying (otherwise known as "staking", "stake-out", "lay-out", "setting-out" or "BS") is to stake out reference points and markers that will guide the construction of new structures such as roads or buildings. These markers are usually staked out according to a suitable coordinate system selected for the project. History of construction surveying * The nearly perfect squareness and north–south orientation of the Great Pyramid of Giza, built c. 2700 BC, affirm the Egyptians' command of surveying. *A recent reassessment of Stonehenge (c.2500 BC) suggests that the monument was set out by prehistoric surveyors using peg and rope geometry. *In the sixth century BC geometric based techniques were used to construct the tunnel of Eupalinos on the island of Samos. *Modern technology advanced surveying's accuracy and efficiency. For example, surveyors used to use two posts joined with a chain to measure distance. This technology could only account for ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tripwire
A tripwire is a passive triggering mechanism. Typically, a wire or cord is attached to a device for detecting or reacting to physical movement. Military applications Such tripwires may be attached to one or more mines – especially fragmentation or bounding mines – in order to increase the area where triggering may occur.. Trip wires are frequently used in booby traps—where either a tug on the wire, or the release of tension on it, will trigger the explosives. Soldiers sometimes detect the presence of tripwires by spraying the area with Silly String. It will settle to the ground in areas where there are no wires. Where wires are present, the "strings" will rest on the taut wires without triggering the explosive, due to its light weight. Its use in detecting tripwires was first discovered in 1993 by Sergeant First Class (SFC) David B. Chandler, Chief Instructor of the U.S. Army's Sapper Leader Course. That year it was introduced to students attending the course, an ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Surveying
Surveying or land surveying is the technique, profession, art, and science of determining the terrestrial two-dimensional or three-dimensional positions of points and the distances and angles between them. A land surveying professional is called a land surveyor. These points are usually on the surface of the Earth, and they are often used to establish maps and boundaries for ownership, locations, such as the designed positions of structural components for construction or the surface location of subsurface features, or other purposes required by government or civil law, such as property sales. Surveyors work with elements of geodesy, geometry, trigonometry, regression analysis, physics, engineering, metrology, programming languages, and the law. They use equipment, such as total stations, robotic total stations, theodolites, GNSS receivers, retroreflectors, 3D scanners, LiDAR sensors, radios, inclinometer, handheld tablets, optical and digital levels, subsurface locators, d ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Laser Level
In surveying and construction, the laser level is a control tool consisting of a rotating laser beam projector that can be affixed to a tripod. The tool is leveled according to the accuracy of the device and projects a fixed red or green beam in a plane about the horizontal and/or vertical axis. Development The concept of a laser level has been around since at least the early 1970s, the original spinning-mirror design laser plane and line level was patented by the late 1980s, and the compact lens-based laser line level (as produced by many tool manufacturers today) was patented in the late 1990s. It was invented by Oscar Soliz in the late 1960’s, who later sold the rights to it. Rotary laser level A rotary laser level is a more advanced laser level in that it spins the beam of light fast enough to give the effect of a complete 360 degree horizontal or vertical plane, thus illuminating not just a fixed line, but a horizontal plane. The laser beam projector employs a rotating ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Laser Line Level
A laser line level is a tool combining a spirit level and/or plumb bob with a laser to display an accurately horizontal or vertical illuminated line on a surface the laser line level is laid against. Laser line levels are used wherever accurate verticals and horizontals are required, typically in the construction and cabinetry industries. Some models are inexpensive enough for do-it-yourself applications. The laser beam is fanned to produce a thin plane beam accurately horizontal or vertical, rather than a pinpoint beam. The axis of the laser is offset from the wall, so that a pinpoint beam would be parallel to and offset from the wall, and would not illuminate it; the fanned beam will intersect the wall, creating an accurately horizontal (or vertical) illuminated line along it. The machine is set up using the built-in spirit level or plumb bob, and the line along the surface is then guaranteed to be accurately horizontal or vertical to within a certain tolerance, specified eithe ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Laser Scanning
Laser scanning is the controlled deflection of laser beams, visible or invisible. Scanned laser beams are used in some 3-D printers, in rapid prototyping, in machines for material processing, in laser engraving machines, in ophthalmological laser systems for the treatment of presbyopia, in confocal microscopy, in laser printers, in laser shows, in Laser TV, and in barcode scanners. Applications specific to mapping and 3D object reconstruction are known as '' 3D laser scanner''. Technology Scanning mirrors Most laser scanners use moveable mirrors to steer the laser beam. The steering of the beam can be ''one-dimensional'', as inside a laser printer, or ''two-dimensional'', as in a laser show system. Additionally, the mirrors can lead to a ''periodic'' motion - like the rotating ''polygon mirrror'' in a barcode scanner or so-called ''resonant galvanometer'' scanners - or to a ''freely addressable'' motion, as in servo-controlled galvanometer scanners. One also uses the terms ' ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
3D Scanner
3D scanning is the process of analyzing a real-world object or environment to collect data on its shape and possibly its appearance (e.g. color). The collected data can then be used to construct digital 3D modelling, 3D models. A 3D scanner can be based on many different technologies, each with its own limitations, advantages and costs. Many limitations in the kind of objects that can be digitization, digitised are still present. For example, optical technology may encounter many difficulties with dark, shiny, reflective or transparent objects. For example, industrial computed tomography scanning, structured-light 3D scanners, Lidar, LiDAR and Time-of-flight camera, Time Of Flight 3D Scanners can be used to construct digital 3D modeling, 3D models, without non-destructive testing, destructive testing. Collected 3D data is useful for a wide variety of applications. These devices are used extensively by the entertainment industry in the production of movies and video games, includ ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Machine Vision
Machine vision (MV) is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of computer science. It attempts to integrate existing technologies in new ways and apply them to solve real world problems. The term is the prevalent one for these functions in industrial automation environments but is also used for these functions in other environment vehicle guidance. The overall machine vision process includes planning the details of the requirements and project, and then creating a solution. During run-time, the process starts with imaging, followed by automated analysis of the image and extraction of the requir ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Image Processing
An image is a visual representation of something. It can be two-dimensional, three-dimensional, or somehow otherwise feed into the visual system to convey information. An image can be an artifact, such as a photograph or other two-dimensional picture, that resembles a subject. In the context of signal processing, an image is a distributed amplitude of color(s). In optics, the term “image” may refer specifically to a 2D image. An image does not have to use the entire visual system to be a visual representation. A popular example of this is of a greyscale image, which uses the visual system's sensitivity to brightness across all wavelengths, without taking into account different colors. A black and white visual representation of something is still an image, even though it does not make full use of the visual system's capabilities. Images are typically still, but in some cases can be moving or animated. Characteristics Images may be two or three-dimensional, such as a pho ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
David Laserscanner
DAVID Laserscanner is a software package for low-cost 3D laser scanning. It allows scanning and digitizing of three-dimensional objects using a camera (e.g. a web cam), a hand-held line laser (i.e. one that projects a line, not just a point), and two plain boards in the background. The software generates 3D data in real time and shows them on the computer screen while the laser line is swept over the object by hand (like a virtual brush). The line may be swept over the object multiple times, until the results are satisfactory. The resulting 3D mesh can be exported into well-known file formats and can thus be imported and processed in most 3D applications. The software is also able to grab the texture and "stitch together" scans made from different viewing directions. Scanning process An initial calibration is made to determine the lens parameters and location of the camera relative to the background boards, which are two vertical planes positioned at 90 degrees to one another b ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
_crop.jpg "Click for more on -> Surveying")
