Volvo D5 Engine
   HOME

TheInfoList



OR:

The Volvo D5 is a type of
turbocharged In an internal combustion engine, a turbocharger (often called a turbo) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake gas, forcing more air into the engine in order to pro ...
diesel engine The diesel engine, named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated temperature of the air in the cylinder due to mechanical compression; thus, the diesel engine is a so-call ...
developed by
Volvo Cars Volvo Cars ( sv, Volvo personvagnar, styled VOLVO in the company's logo) is a Swedish multinational manufacturer of luxury vehicles headquartered in Torslanda, Gothenburg. The company manufactures SUVs, station wagons, and sedans. The company's ...
for use in its passenger cars. The D5 engine is based on the Volvo Modular petrol engine. The D5 displaces 2.4 liters; a smaller series of two-litre engines were developed in 2010 and marketed as the Volvo D3 and D4.


History

It is an all aluminium five-cylinder engine with 20 valves and
double overhead camshaft An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
s. In all but one late version it has a VGT turbocharger of the type VNT (variable nozzle turbine),
common rail Common rail direct fuel injection is a direct fuel injection system built around a high-pressure (over ) fuel rail feeding solenoid valves, as opposed to a low-pressure fuel pump feeding unit injectors (or pump nozzles). High-pressure injection ...
direct injection and cooled
exhaust gas recirculation In internal combustion engines, exhaust gas recirculation (EGR) is a nitrogen oxide () emissions reduction technique used in petrol/gasoline, diesel engines and some hydrogen engines. EGR works by recirculating a portion of an engine's exhaust ...
(EGR). There are three generations of D5 engines: * The first generation was introduced in 2001. * The second generation was introduced in 2005. The second generation got a slight reduction in stroke and has a reduced
compression ratio The compression ratio is the ratio between the volume of the cylinder and combustion chamber in an internal combustion engine at their maximum and minimum values. A fundamental specification for such engines, it is measured two ways: the stati ...
, a
water-cooled Cooling tower and water discharge of a nuclear power plant Water cooling is a method of heat removal from components and industrial equipment. Evaporative cooling using water is often more efficient than air cooling. Water is inexpensive and non ...
VNT turbocharger with a bigger compressor and an electric
servo motor A servomotor (or servo motor) is a rotary actuator or linear actuator that allows for precise control of angular or linear position, velocity and acceleration. It consists of a suitable motor coupled to a sensor for position feedback. It also r ...
to adjust the vanes, an improved EGR system, a throttle valve, revised intake and exhaust ports and a newer generation of common-rail direct injection with improved injectors. * The third generation was introduced in 2009. The third generation got a further reduction in
compression ratio The compression ratio is the ratio between the volume of the cylinder and combustion chamber in an internal combustion engine at their maximum and minimum values. A fundamental specification for such engines, it is measured two ways: the stati ...
, a two-stage turbo system (D5244T10), an improved
exhaust gas recirculation In internal combustion engines, exhaust gas recirculation (EGR) is a nitrogen oxide () emissions reduction technique used in petrol/gasoline, diesel engines and some hydrogen engines. EGR works by recirculating a portion of an engine's exhaust ...
(EGR) system, revised intake and exhaust ports and a newer generation of common-rail direct injection with higher pressure and
piezoelectric Piezoelectricity (, ) is the electric charge that accumulates in certain solid materials—such as crystals, certain ceramics, and biological matter such as bone, DNA, and various proteins—in response to applied Stress (mechanics), mechanical s ...
injectors. Volvo has a special version of the D5 (D5244T8/T13) for use in the C30, S40, V50 and C70 models that produces and of torque, reduced to with
automatic transmission An automatic transmission (sometimes abbreviated to auto or AT) is a multi-speed transmission used in internal combustion engine-based motor vehicles that does not require any input from the driver to change forward gears under normal driving c ...
. The engine compartments of these cars are smaller so among other things the engine has a different
air intake An intake (also inlet) is an opening, structure or system through which a fluid is admitted to a space or machine as a consequence of a pressure differential between the outside and the inside. The pressure difference may be generated on the ins ...
system, different
exhaust system An exhaust system is used to guide reaction exhaust gases away from a controlled combustion inside an engine or stove. The entire system conveys burnt gases from the engine and includes one or more exhaust pipes. Depending on the overall system ...
, smaller charge air cooler and a smaller
radiator Radiators are heat exchangers used to transfer thermal energy from one medium to another for the purpose of cooling and heating. The majority of radiators are constructed to function in cars, buildings, and electronics. A radiator is always a ...
. In 2009 Volvo, in conjunction with
Polestar Polestar is a Swedish automotive brand established in 1996 by Volvo Cars' partner Flash/Polestar Racing and acquired in 2015 by Volvo, which itself was acquired by Geely in 2010. It is headquartered in Torslanda outside Gothenburg, Sweden with ...
, launched software upgrades for many of its D5 engines. These upgrades have no impact on official emission or fuel consumption figures, but produce power and torque gains of typically a little over 10%. The first engine to have such an upgrade available was the D5244T4, and the upgrade increased the torque from , and power from . The same upgrade was available for the mechanically-identical D5244T5. Similar upgrades have since been launched for later engines.


Marine engine

The D5244T is also offered as a
marine engine An inboard motor is a marine propulsion system for boats. As opposed to an outboard motor where an engine is mounted outside the hull of the craft, an ''inboard motor'' is an engine enclosed within the hull of the boat, usually connected to a pr ...
by
Volvo Penta Volvo Penta was founded as Penta in 1907 with the production of its first marine engine, the B1. The Penta company soon became an established internal combustion engine manufacturer, which in 1927 delivered the engine for Volvo's first passenge ...
under the name D3. The marinised engine is in large parts identical to D5244T. This includes crankshaft, pistons, camshafts, valves, cylinder block, cylinder head, turbo, injectors and the high pressure pump. The D3 ECU has a modified software, which e.g. gives a modified torque suited for marine applications and has a simplified starting sequence. The hardware differences between D5244T and D3 are: a water-cooled
intercooler An intercooler is a heat exchanger used to cool a gas after compression. Often found in turbocharged engines, intercoolers are also used in air compressors, air conditioners, refrigeration and gas turbines. Internal combustion engines Mo ...
, a water-cooled
exhaust manifold In automotive engineering, an exhaust manifold collects the exhaust gases from multiple cylinders into one pipe. The word ''manifold'' comes from the Old English word ''manigfeald'' (from the Anglo-Saxon ''manig'' anyand ''feald'' old and refe ...
, a heavier monolithic crankwheel, a seawater-pump and a
heat exchanger A heat exchanger is a system used to transfer heat between a source and a working fluid. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contac ...
. The output is at 3,000 rpm, , , , at 4,000 rpm and it is coupled to a duoprop I/O system.


Models

Note: 'D5' is branding. All these engines share the five-cylinder block, although not all consistently used the 'D5' badge over time. This is due to changes in hardware and the specific model the engine was deployed in. E.g. On the S60 -05 range, the D5244T was labelled 'D5', and subsequently the D5244T5 was labelled '2.4D' as a (software) detuned version of the D5244T4 'D5' on the 05-09 range. The D5244T21 was even badged 'D4' when used in the S60 D4 AWD automatic between 2016 and 2018. Similarly the 2016 XC60 AWD branded the 190PS D5244T21 as 'D4', but the 220PS D5244T20 as 'D5', whilst the two wheel drive XC60 model of the same year used 'D4' to describe the different D4204T four-cylinder diesel engine developed in conjunction with Ford and
PSA PSA, PsA, Psa, or psa may refer to: Biology and medicine * Posterior spinal artery * Primary systemic amyloidosis, a disease caused by the accumulation of abnormal proteins * Prostate-specific antigen, an enzyme used as a blood tracer for pros ...
.


Volvo D3 and D4

In 2010 Volvo debuted a new series of two-liter engines based on the third generation D5 with all the features of that engine. Three models with different power outputs were available (internal model codes D5204T, D5204T2, and D5204T5), marketed as the D3 and D4 depending on output. The direct injection pump is a Bosch CP4 with two heads, helping to produce torque of around even at low engine speeds. The D3/D4 bore remains the same as in the D5, but with a stroke the displacement is brought down to , keeping it below the vital two-litre threshold in many countries. The D3 is the lower-powered series, with the higher output D5204T referred to as the D4. In April 2011 the original D5204T2 was replaced by the upgraded D3 version, which featured Volvo's "Volvo Environment Diesel" (VED) technologies to lower emissions and consumption. Power and torque figures remained largely unchanged. In April 2012 a lower tuned engine, the D5204T7 was announced; it was marketed as a "D3" and meanwhile the version changed its name to "D4".


Specifications


Successor

In autumn of 2013 the new
Volvo Engine Architecture The Volvo Engine Architecture (VEA) is a family of straight-three and straight-four automobile petrol and diesel engines produced by Volvo Cars in Skövde, Sweden, since 2013, Zhangjiakou, China since 2016 and Tanjung Malim, Malaysia since 2022 ...
was introduced. The 5-cylinder D5 began a process of being gradually phased out along with the V70/XC70 and first generation XC60. Production of the D5 type engines ended in 2017.


References


External links


D5 215 HP Official press-release
{{DEFAULTSORT:Volvo D5 Engine D5 Straight-five engines Diesel engines by model