![2017 TOCAMAC Fusion Chamber N0689](https://upload.wikimedia.org/wikipedia/commons/0/00/2017_TOCAMAC_Fusion_Chamber_N0689.jpg)
A tokamak (; russian: токамáк; otk, 𐱃𐰸𐰢𐰴, Toḳamaḳ) is a device which uses a powerful
magnetic field to confine
plasma in the shape of a
torus
In geometry, a torus (plural tori, colloquially donut or doughnut) is a surface of revolution generated by revolving a circle in three-dimensional space about an axis that is coplanar with the circle.
If the axis of revolution does not tou ...
. The tokamak is one of several types of
magnetic confinement
Magnetic confinement fusion is an approach to generate thermonuclear fusion power that uses magnetic fields to confine fusion fuel in the form of a plasma. Magnetic confinement is one of two major branches of fusion energy research, along with ...
devices being developed to produce controlled
thermonuclear
Thermonuclear fusion is the process of atomic nuclei combining or “fusing” using high temperatures to drive them close enough together for this to become possible. There are two forms of thermonuclear fusion: ''uncontrolled'', in which the re ...
fusion power
Fusion power is a proposed form of power generation that would generate electricity by using heat from nuclear fusion reactions. In a fusion process, two lighter atomic nuclei combine to form a heavier nucleus, while releasing energy. Devices de ...
. , it was the leading candidate for a practical
fusion reactor
Fusion power is a proposed form of power generation that would generate electricity by using heat from nuclear fusion reactions. In a fusion process, two lighter atomic nuclei combine to form a heavier nucleus, while releasing energy. Devices ...
.
Tokamaks were initially conceptualized in the 1950s by Soviet physicists
Igor Tamm
Igor Yevgenyevich Tamm ( rus, И́горь Евге́ньевич Тамм , p=ˈiɡərʲ jɪvˈɡʲenʲjɪvitɕ ˈtam , a=Ru-Igor Yevgenyevich Tamm.ogg; 8 July 1895 – 12 April 1971) was a Soviet physicist who received the 1958 Nobel Prize in ...
and
Andrei Sakharov
Andrei Dmitrievich Sakharov ( rus, Андрей Дмитриевич Сахаров, p=ɐnˈdrʲej ˈdmʲitrʲɪjevʲɪtɕ ˈsaxərəf; 21 May 192114 December 1989) was a Soviet nuclear physicist, dissident, nobel laureate and activist for n ...
, inspired by a letter by
Oleg Lavrentiev. The first working tokamak was attributed to the work of
Natan Yavlinsky
Natan Aronovich Yavlinsky (russian: Натан Аронович Явлинский; 13 February 191228 July 1962) was a Russian physicist in the former Soviet Union who invented and developed the first working tokamak.
Early life and career
Yav ...
on the T-1 in 1958.
It had been demonstrated that a
stable plasma equilibrium requires
magnetic field line
A magnetic field is a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials. A moving charge in a magnetic field experiences a force perpendicular to its own velocity and to ...
s that wind around the torus in a
helix
A helix () is a shape like a corkscrew or spiral staircase. It is a type of smooth space curve with tangent lines at a constant angle to a fixed axis. Helices are important in biology, as the DNA molecule is formed as two intertwined helic ...
. Devices like the
z-pinch
In fusion power research, the Z-pinch (zeta pinch) is a type of plasma confinement system that uses an electric current in the plasma to generate a magnetic field that compresses it (see pinch). These systems were originally referred to simp ...
and
stellarator
A stellarator is a plasma device that relies primarily on external magnets to confine a plasma. Scientists researching magnetic confinement fusion aim to use stellarator devices as a vessel for nuclear fusion reactions. The name refers to the ...
had attempted this, but demonstrated serious instabilities. It was the development of the concept now known as the
safety factor
In engineering, a factor of safety (FoS), also known as (and used interchangeably with) safety factor (SF), expresses how much stronger a system is than it needs to be for an intended load. Safety factors are often calculated using detailed analy ...
(labelled ''q'' in mathematical notation) that guided tokamak development; by arranging the reactor so this critical factor ''q'' was always greater than 1, the tokamaks strongly suppressed the instabilities which plagued earlier designs.
By the mid-1960s, the tokamak designs began to show greatly improved performance. The initial results were released in 1965, but were ignored;
Lyman Spitzer
Lyman Spitzer Jr. (June 26, 1914 – March 31, 1997) was an American theoretical physicist, astronomer and mountaineer. As a scientist, he carried out research into star formation, plasma physics, and in 1946, conceived the idea of telesco ...
dismissed them out of hand after noting potential problems in their system for measuring temperatures. A second set of results was published in 1968, this time claiming performance far in advance of any other machine. When these were also met skeptically, the Soviets invited a delegation from the
United Kingdom
The United Kingdom of Great Britain and Northern Ireland, commonly known as the United Kingdom (UK) or Britain, is a country in Europe, off the north-western coast of the European mainland, continental mainland. It comprises England, Scotlan ...
to make their own measurements. These confirmed the Soviet results, and their 1969 publication resulted in a stampede of tokamak construction.
By the mid-1970s, dozens of tokamaks were in use around the world. By the late 1970s, these machines had reached all of the conditions needed for practical fusion, although not at the same time nor in a single reactor. With the goal of breakeven (a
fusion energy gain factor
A fusion energy gain factor, usually expressed with the symbol ''Q'', is the ratio of fusion power produced in a nuclear fusion reactor to the power required to maintain the plasma in steady state. The condition of ''Q'' = 1, when the power bei ...
equal to 1) now in sight, a new series of machines were designed that would run on a fusion fuel of
deuterium
Deuterium (or hydrogen-2, symbol or deuterium, also known as heavy hydrogen) is one of two stable isotopes of hydrogen (the other being protium, or hydrogen-1). The nucleus of a deuterium atom, called a deuteron, contains one proton and one ...
and
tritium
Tritium ( or , ) or hydrogen-3 (symbol T or H) is a rare and radioactive isotope of hydrogen with half-life about 12 years. The nucleus of tritium (t, sometimes called a ''triton'') contains one proton and two neutrons, whereas the nucleus of ...
. These machines, notably the
Joint European Torus
The Joint European Torus, or JET, is an operational Magnetic confinement fusion, magnetically confined Plasma (physics), plasma physics experiment, located at Culham Centre for Fusion Energy in Oxfordshire, United Kingdom, UK. Based on a tokamak ...
(JET),
Tokamak Fusion Test Reactor
The Tokamak Fusion Test Reactor (TFTR) was an experimental tokamak built at Princeton Plasma Physics Laboratory (PPPL) circa 1980 and entering service in 1982. TFTR was designed with the explicit goal of reaching scientific breakeven, the point w ...
(TFTR), had the explicit goal of reaching breakeven.
Instead, these machines demonstrated new problems that limited their performance. Solving these would require a much larger and more expensive machine, beyond the abilities of any one country. After an initial agreement between
Ronald Reagan and
Mikhail Gorbachev in November 1985, the
International Thermonuclear Experimental Reactor
ITER (initially the International Thermonuclear Experimental Reactor, ''iter'' meaning "the way" or "the path" in Latin) is an international nuclear fusion research and engineering megaproject aimed at creating energy by replicating, on Earth ...
(ITER) effort emerged and remains the primary international effort to develop practical fusion power. Many smaller designs, and offshoots like the
spherical tokamak
A spherical tokamak is a type of fusion power device based on the tokamak principle. It is notable for its very narrow profile, or '' aspect ratio''. A traditional tokamak has a toroidal confinement area that gives it an overall shape similar to ...
, continue to be used to investigate performance parameters and other issues. , JET remains the record holder for fusion output, reaching 16 MW of output for 24 MW of input heating power.
Etymology
The word ''tokamak'' is a
transliteration
Transliteration is a type of conversion of a text from one script to another that involves swapping letters (thus ''trans-'' + '' liter-'') in predictable ways, such as Greek → , Cyrillic → , Greek → the digraph , Armenian → or L ...
of the
Russian
Russian(s) refers to anything related to Russia, including:
*Russians (, ''russkiye''), an ethnic group of the East Slavic peoples, primarily living in Russia and neighboring countries
*Rossiyane (), Russian language term for all citizens and peo ...
word , an acronym of either:
:
:
: toroidal chamber with magnetic coils;
or
:
:
: toroidal chamber with axial magnetic field.
The term was created in 1957 by
Igor Golovin, the vice-director of the Laboratory of Measuring Apparatus of Academy of Science, today's
Kurchatov Institute
The Kurchatov Institute (russian: Национальный исследовательский центр «Курчатовский Институт», 'National Research Centre "Kurchatov Institute) is Russia's leading research and developmen ...
. A similar term, ''tokomag'', was also proposed for a time.
Also considering the existence of many
Turkic nations living in the Russian region, it can be thought that the etymological analogy is the origin of the word Turkish tokmak. Old Turkish
toḳımaḳref name=toḳımaḳ>
Dīwān Lughāt al-Turk 1073br>
Turkish Etimology/ref> (the beater used by the beaters)
In addition, since it is used for forging iron in blacksmithing, it is technically reasonable to conside
this Turkish wordas appropriate. It is known that the oldest usage of the word Tokamak/Tokmak is in
Göktürk Khanate
History
First steps
In 1934,
Mark Oliphant
Sir Marcus Laurence Elwin Oliphant, (8 October 1901 – 14 July 2000) was an Australian physicist and humanitarian who played an important role in the first experimental demonstration of nuclear fusion and in the development of nuclear weapon ...
,
Paul Harteck
Paul Karl Maria Harteck (20 July 190222 January 1985) was an Austrian physical chemist. In 1945 under Operation Epsilon in "the big sweep" throughout Germany, Harteck was arrested by the allied British and American Armed Forces for suspicion of ...
and
Ernest Rutherford
Ernest Rutherford, 1st Baron Rutherford of Nelson, (30 August 1871 – 19 October 1937) was a New Zealand physicist who came to be known as the father of nuclear physics.
''Encyclopædia Britannica'' considers him to be the greatest ...
were the first to achieve fusion on Earth, using a
particle accelerator
A particle accelerator is a machine that uses electromagnetic fields to propel charged particles to very high speeds and energies, and to contain them in well-defined beams.
Large accelerators are used for fundamental research in particle ...
to shoot
deuterium
Deuterium (or hydrogen-2, symbol or deuterium, also known as heavy hydrogen) is one of two stable isotopes of hydrogen (the other being protium, or hydrogen-1). The nucleus of a deuterium atom, called a deuteron, contains one proton and one ...
nuclei into metal foil containing deuterium or other atoms. This allowed them to measure the
nuclear cross section
The nuclear cross section of a nucleus is used to describe the probability that a nuclear reaction will occur. The concept of a nuclear cross section can be quantified physically in terms of "characteristic area" where a larger area means a large ...
of various fusion reactions, and determined that the deuterium–deuterium reaction occurred at a lower energy than other reactions, peaking at about 100,000
electronvolt
In physics, an electronvolt (symbol eV, also written electron-volt and electron volt) is the measure of an amount of kinetic energy gained by a single electron accelerating from rest through an electric potential difference of one volt in vacuum ...
s (100 keV).
Accelerator-based fusion is not practical because the reactor
cross section
Cross section may refer to:
* Cross section (geometry)
** Cross-sectional views in architecture & engineering 3D
*Cross section (geology)
* Cross section (electronics)
* Radar cross section, measure of detectability
* Cross section (physics)
**Abs ...
is tiny; most of the particles in the accelerator will scatter off the fuel, not fuse with it. These scatterings cause the particles to lose energy to the point where they can no longer undergo fusion. The energy put into these particles is thus lost, and it is easy to demonstrate this is much more energy than the resulting fusion reactions can release.
To maintain fusion and produce net energy output, the bulk of the fuel must be raised to high temperatures so its atoms are constantly colliding at high speed; this gives rise to the name ''thermonuclear'' due to the high temperatures needed to bring it about. In 1944,
Enrico Fermi calculated the reaction would be self-sustaining at about 50,000,000 K; at that temperature, the rate that energy is given off by the reactions is high enough that they heat the surrounding fuel rapidly enough to maintain the temperature against losses to the environment, continuing the reaction.
During the
Manhattan Project
The Manhattan Project was a research and development undertaking during World War II that produced the first nuclear weapons. It was led by the United States with the support of the United Kingdom and Canada. From 1942 to 1946, the project w ...
, the first practical way to reach these temperatures was created, using an
atomic bomb. In 1944, Fermi gave a talk on the physics of fusion in the context of a then-hypothetical
hydrogen bomb. However, some thought had already been given to a ''controlled'' fusion device, and
James L. Tuck
James Leslie Tuck Order of the British Empire, OBE, (9 January 1910 – 15 December 1980) was a British physicist. He was born in Manchester, England, and educated at the Victoria University of Manchester. Because of his involvement with the Manh ...
and
Stanislaw Ulam had attempted such using
shaped charge
A shaped charge is an explosive charge shaped to form an explosively formed penetrator (EFP) to focus the effect of the explosive's energy. Different types of shaped charges are used for various purposes such as cutting and forming metal, ini ...
s driving a metal foil infused with deuterium, although without success.
The first attempts to build a practical fusion machine took place in the
United Kingdom
The United Kingdom of Great Britain and Northern Ireland, commonly known as the United Kingdom (UK) or Britain, is a country in Europe, off the north-western coast of the European mainland, continental mainland. It comprises England, Scotlan ...
, where
George Paget Thomson
Sir George Paget Thomson, FRS (; 3 May 189210 September 1975) was a British physicist and Nobel laureate in physics recognized for his discovery of the wave properties of the electron by electron diffraction.
Education and early life
Thomso ...
had selected the
pinch effect
A pinch (or: Bennett pinch (after Willard Harrison Bennett), electromagnetic pinch, magnetic pinch, pinch effect, or plasma pinch.) is the compression of an electrically conducting Electrical filament, filament by magnetic forces, or a device tha ...
as a promising technique in 1945. After several failed attempts to gain funding, he gave up and asked two graduate students, Stanley (Stan) W. Cousins and Alan Alfred Ware (1924–2010), to build a device out of surplus
radar
Radar is a detection system that uses radio waves to determine the distance ('' ranging''), angle, and radial velocity of objects relative to the site. It can be used to detect aircraft, ships, spacecraft, guided missiles, motor vehicles, we ...
equipment. This was successfully operated in 1948, but showed no clear evidence of fusion and failed to gain the interest of the
Atomic Energy Research Establishment.
Lavrentiev's letter
In 1950,
Oleg Lavrentiev, then a
Red Army
The Workers' and Peasants' Red Army ( Russian: Рабо́че-крестья́нская Кра́сная армия),) often shortened to the Red Army, was the army and air force of the Russian Soviet Federative Socialist Republic and, afte ...
sergeant stationed on
Sakhalin
Sakhalin ( rus, Сахали́н, r=Sakhalín, p=səxɐˈlʲin; ja, 樺太 ''Karafuto''; zh, c=, p=Kùyèdǎo, s=库页岛, t=庫頁島; Manchu: ᠰᠠᡥᠠᠯᡳᠶᠠᠨ, ''Sahaliyan''; Orok: Бугата на̄, ''Bugata nā''; Nivkh ...
, wrote a letter to the
Central Committee of the Communist Party of the Soviet Union. The letter outlined the idea of using an
atomic bomb to ignite a fusion fuel, and then went on to describe a system that used
electrostatic
Electrostatics is a branch of physics that studies electric charges at rest ( static electricity).
Since classical times, it has been known that some materials, such as amber, attract lightweight particles after rubbing. The Greek word for amb ...
fields to contain a hot plasma in a steady state for energy production.
The letter was sent to
Andrei Sakharov
Andrei Dmitrievich Sakharov ( rus, Андрей Дмитриевич Сахаров, p=ɐnˈdrʲej ˈdmʲitrʲɪjevʲɪtɕ ˈsaxərəf; 21 May 192114 December 1989) was a Soviet nuclear physicist, dissident, nobel laureate and activist for n ...
for comment. Sakharov noted that "the author formulates a very important and not necessarily hopeless problem", and found his main concern in the arrangement was that the plasma would hit the electrode wires, and that "wide meshes and a thin current-carrying part which will have to reflect almost all incident nuclei back into the reactor. In all likelihood, this requirement is incompatible with the mechanical strength of the device."
Some indication of the importance given to Lavrentiev's letter can be seen in the speed with which it was processed; the letter was received by the Central Committee on 29 July, Sakharov sent his review in on 18 August, by October, Sakharov and
Igor Tamm
Igor Yevgenyevich Tamm ( rus, И́горь Евге́ньевич Тамм , p=ˈiɡərʲ jɪvˈɡʲenʲjɪvitɕ ˈtam , a=Ru-Igor Yevgenyevich Tamm.ogg; 8 July 1895 – 12 April 1971) was a Soviet physicist who received the 1958 Nobel Prize in ...
had completed the first detailed study of a fusion reactor, and they had asked for funding to build it in January 1951.
Magnetic confinement
When heated to fusion temperatures, the
electron
The electron ( or ) is a subatomic particle with a negative one elementary electric charge. Electrons belong to the first generation of the lepton particle family,
and are generally thought to be elementary particles because they have no ...
s in atoms dissociate, resulting in a fluid of nuclei and electrons known as
plasma. Unlike electrically neutral atoms, a plasma is electrically conductive, and can, therefore, be manipulated by electrical or magnetic fields.
Sakharov's concern about the electrodes led him to consider using magnetic confinement instead of electrostatic. In the case of a magnetic field, the particles will circle around the
lines of force
A line of force in Faraday's extended sense is synonymous with Maxwell's line of induction. According to J.J. Thomson, Faraday usually discusses ''lines of force'' as chains of polarized particles in a dielectric, yet sometimes Faraday discusses ...
. As the particles are moving at high speed, their resulting paths look like a helix. If one arranges a magnetic field so lines of force are parallel and close together, the particles orbiting adjacent lines may collide, and fuse.
Such a field can be created in a
solenoid, a cylinder with magnets wrapped around the outside. The combined fields of the magnets create a set of parallel magnetic lines running down the length of the cylinder. This arrangement prevents the particles from moving sideways to the wall of the cylinder, but it does not prevent them from running out the end. The obvious solution to this problem is to bend the cylinder around into a donut shape, or torus, so that the lines form a series of continual rings. In this arrangement, the particles circle endlessly.
Sakharov discussed the concept with
Igor Tamm
Igor Yevgenyevich Tamm ( rus, И́горь Евге́ньевич Тамм , p=ˈiɡərʲ jɪvˈɡʲenʲjɪvitɕ ˈtam , a=Ru-Igor Yevgenyevich Tamm.ogg; 8 July 1895 – 12 April 1971) was a Soviet physicist who received the 1958 Nobel Prize in ...
, and by the end of October 1950 the two had written a proposal and sent it to
Igor Kurchatov
Igor Vasil'evich Kurchatov (russian: Игорь Васильевич Курчатов; 12 January 1903 – 7 February 1960), was a Soviet physicist who played a central role in organizing and directing the former Soviet program of nuclear weapo ...
, the director of the atomic bomb project within the USSR, and his deputy,
Igor Golovin. However, this initial proposal ignored a fundamental problem; when arranged along a straight solenoid, the external magnets are evenly spaced, but when bent around into a torus, they are closer together on the inside of the ring than the outside. This leads to uneven forces that cause the particles to drift away from their magnetic lines.
During visits to the
Laboratory of Measuring Instruments of the USSR Academy of Sciences (LIPAN), the Soviet nuclear research centre, Sakharov suggested two possible solutions to this problem. One was to suspend a current-carrying ring in the centre of the torus. The current in the ring would produce a magnetic field that would mix with the one from the magnets on the outside. The resulting field would be twisted into a helix, so that any given particle would find itself repeatedly on the outside, then inside, of the torus. The drifts caused by the uneven fields are in opposite directions on the inside and outside, so over the course of multiple orbits around the long axis of the torus, the opposite drifts would cancel out. Alternately, he suggested using an external magnet to induce a current in the plasma itself, instead of a separate metal ring, which would have the same effect.
In January 1951, Kurchatov arranged a meeting at LIPAN to consider Sakharov's concepts. They found widespread interest and support, and in February a report on the topic was forwarded to
Lavrentiy Beria
Lavrentiy Pavlovich Beria (; rus, Лавре́нтий Па́влович Бе́рия, Lavréntiy Pávlovich Bériya, p=ˈbʲerʲiə; ka, ლავრენტი ბერია, tr, ; – 23 December 1953) was a Georgian Bolsheviks ...
, who oversaw the atomic efforts in the USSR. For a time, nothing was heard back.
Richter and the birth of fusion research
![Ronald Richter y Perón](https://upload.wikimedia.org/wikipedia/commons/3/34/Ronald_Richter_y_Per%C3%B3n.jpg)
On 25 March 1951, Argentine President
Juan Perón announced that a former German scientist,
Ronald Richter
Ronald Richter (1909–1991) was an Austrian-born German, later Argentine citizen, scientist who became infamous in connection with the Argentine Huemul Project and the National Atomic Energy Commission (CNEA). The project was intended to generat ...
, had succeeded in producing fusion at a laboratory scale as part of what is now known as the
Huemul Project
The Huemul Project ( es, Proyecto Huemul) was an early 1950s Argentine effort to develop a fusion power device known as the Thermotron. The concept was invented by Austrian scientist Ronald Richter, who claimed to have a design that would produc ...
. Scientists around the world were excited by the announcement, but soon concluded it was not true; simple calculations showed that his experimental setup could not produce enough energy to heat the fusion fuel to the needed temperatures.
Although dismissed by nuclear researchers, the widespread news coverage meant politicians were suddenly aware of, and receptive to, fusion research. In the UK, Thomson was suddenly granted considerable funding. Over the next months, two projects based on the pinch system were up and running. In the US,
Lyman Spitzer
Lyman Spitzer Jr. (June 26, 1914 – March 31, 1997) was an American theoretical physicist, astronomer and mountaineer. As a scientist, he carried out research into star formation, plasma physics, and in 1946, conceived the idea of telesco ...
read the Huemul story, realized it was false, and set about designing a machine that would work. In May he was awarded $50,000 to begin research on his
stellarator
A stellarator is a plasma device that relies primarily on external magnets to confine a plasma. Scientists researching magnetic confinement fusion aim to use stellarator devices as a vessel for nuclear fusion reactions. The name refers to the ...
concept. Jim Tuck had returned to the UK briefly and saw Thomson's pinch machines. When he returned to Los Alamos he also received $50,000 directly from the Los Alamos budget.
Similar events occurred in the USSR. In mid-April, Dmitri Efremov of the Scientific Research Institute of Electrophysical Apparatus stormed into Kurchatov's study with a magazine containing a story about Richter's work, demanding to know why they were beaten by the Argentines. Kurchatov immediately contacted Beria with a proposal to set up a separate fusion research laboratory with
Lev Artsimovich
Lev Andreyevich Artsimovich ( Russian: Лев Андреевич Арцимович, February 25, 1909 – March 1, 1973), also transliterated Arzimowitsch, was a Soviet physicist who is regarded as the one of the founder of Tokamak— a device ...
as director. Only days later, on 5 May, the proposal had been signed by
Joseph Stalin
Joseph Vissarionovich Stalin (born Ioseb Besarionis dze Jughashvili; – 5 March 1953) was a Georgian revolutionary and Soviet political leader who led the Soviet Union from 1924 until his death in 1953. He held power as General Secretar ...
.
New ideas
![EAST_Tokamak_plasma_image3](https://upload.wikimedia.org/wikipedia/commons/1/1a/EAST_Tokamak_plasma_image3.jpg)
By October, Sakharov and Tamm had completed a much more detailed consideration of their original proposal, calling for a device with a major radius (of the torus as a whole) of and a minor radius (the interior of the cylinder) of . The proposal suggested the system could produce of
tritium
Tritium ( or , ) or hydrogen-3 (symbol T or H) is a rare and radioactive isotope of hydrogen with half-life about 12 years. The nucleus of tritium (t, sometimes called a ''triton'') contains one proton and two neutrons, whereas the nucleus of ...
a day, or breed of U233 a day.
As the idea was further developed, it was realized that a current in the plasma could create a field that was strong enough to confine the plasma as well, removing the need for the external magnets. At this point, the Soviet researchers had re-invented the pinch system being developed in the UK, although they had come to this design from a very different starting point.
Once the idea of using the pinch effect for confinement had been proposed, a much simpler solution became evident. Instead of a large toroid, one could simply induce the current into a linear tube, which could cause the plasma within to collapse down into a filament. This had a huge advantage; the current in the plasma would heat it through normal
resistive heating
Joule heating, also known as resistive, resistance, or Ohmic heating, is the process by which the passage of an electric current through a conductor produces heat.
Joule's first law (also just Joule's law), also known in countries of former U ...
, but this would not heat the plasma to fusion temperatures. However, as the plasma collapsed, the
adiabatic process
In thermodynamics, an adiabatic process (Greek: ''adiábatos'', "impassable") is a type of thermodynamic process that occurs without transferring heat or mass between the thermodynamic system and its environment. Unlike an isothermal proces ...
would result in the temperature rising dramatically, more than enough for fusion. With this development, only Golovin and
Natan Yavlinsky
Natan Aronovich Yavlinsky (russian: Натан Аронович Явлинский; 13 February 191228 July 1962) was a Russian physicist in the former Soviet Union who invented and developed the first working tokamak.
Early life and career
Yav ...
continued considering the more static toroidal arrangement.
Instability
On 4 July 1952,
Nikolai Filippov's group measured
neutron
The neutron is a subatomic particle, symbol or , which has a neutral (not positive or negative) charge, and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons beh ...
s being released from a linear pinch machine.
Lev Artsimovich
Lev Andreyevich Artsimovich ( Russian: Лев Андреевич Арцимович, February 25, 1909 – March 1, 1973), also transliterated Arzimowitsch, was a Soviet physicist who is regarded as the one of the founder of Tokamak— a device ...
demanded that they check everything before concluding fusion had occurred, and during these checks, they found that the neutrons were not from fusion at all. This same linear arrangement had also occurred to researchers in the UK and US, and their machines showed the same behaviour. But the great secrecy surrounding the type of research meant that none of the groups were aware that others were also working on it, let alone having the identical problem.
After much study, it was found that some of the released neutrons were produced by instabilities in the plasma. There were two common types of instability, the ''sausage'' that was seen primarily in linear machines, and the ''kink'' which was most common in the toroidal machines.
[ Groups in all three countries began studying the formation of these instabilities and potential ways to address them.] Important contributions to the field were made by Martin David Kruskal
Martin David Kruskal (; September 28, 1925 – December 26, 2006) was an American mathematician and physicist. He made fundamental contributions in many areas of mathematics and science, ranging from plasma physics to general relativity and ...
and Martin Schwarzschild
Martin Schwarzschild (May 31, 1912 – April 10, 1997) was a German-American astrophysicist.
Biography
Schwarzschild was born in Potsdam into a distinguished German Jewish academic family. His father was the physicist Karl Schwarzschild and ...
in the US, and Shafranov in the USSR.
One idea that came from these studies became known as the "stabilized pinch". This concept added additional magnets to the outside of the chamber, which created a field that would be present in the plasma before the pinch discharge. In most concepts, the external field was relatively weak, and because a plasma is diamagnetic
Diamagnetic materials are repelled by a magnetic field; an applied magnetic field creates an induced magnetic field in them in the opposite direction, causing a repulsive force. In contrast, paramagnetic and ferromagnetic materials are attracted ...
, it penetrated only the outer areas of the plasma.[ When the pinch discharge occurred and the plasma quickly contracted, this field became "frozen in" to the resulting filament, creating a strong field in its outer layers. In the US, this was known as "giving the plasma a backbone."
Sakharov revisited his original toroidal concepts and came to a slightly different conclusion about how to stabilize the plasma. The layout would be the same as the stabilized pinch concept, but the role of the two fields would be reversed. Instead of weak external fields providing stabilization and a strong pinch current responsible for confinement, in the new layout, the external magnets would be much more powerful in order to provide the majority of confinement, while the current would be much smaller and responsible for the stabilizing effect.
]
Steps toward declassification
In 1955, with the linear approaches still subject to instability, the first toroidal device was built in the USSR. TMP was a classic pinch machine, similar to models in the UK and US of the same era. The vacuum chamber was made of ceramic, and the spectra of the discharges showed silica, meaning the plasma was not perfectly confined by magnetic field and hitting the walls of the chamber. Two smaller machines followed, using copper shells.[ The conductive shells were intended to help stabilize the plasma, but were not completely successful in any of the machines that tried it.
With progress apparently stalled, in 1955, Kurchatov called an All Union conference of Soviet researchers with the ultimate aim of opening up fusion research within the USSR. In April 1956, Kurchatov travelled to the UK as part of a widely publicized visit by ]Nikita Khrushchev
Nikita Sergeyevich Khrushchev (– 11 September 1971) was the First Secretary of the Communist Party of the Soviet Union from 1953 to 1964 and chairman of the country's Council of Ministers from 1958 to 1964. During his rule, Khrushchev s ...
and Nikolai Bulganin
Nikolai Alexandrovich Bulganin (russian: Никола́й Алекса́ндрович Булга́нин; – 24 February 1975) was a Soviet politician who served as Minister of Defense (1953–1955) and Premier of the Soviet Union (1955–19 ...
. He offered to give a talk at Atomic Energy Research Establishment, at the former RAF Harwell
Royal Air Force Harwell or more simply RAF Harwell is a former Royal Air Force station, near the village of Harwell, located south east of Wantage, Oxfordshire and north west of Reading, Berkshire, England.
The site is now the Harwell Sc ...
, where he shocked the hosts by presenting a detailed historical overview of the Soviet fusion efforts. He took time to note, in particular, the neutrons seen in early machines and warned that neutrons did not mean fusion.
Unknown to Kurchatov, the British ZETA
Zeta (, ; uppercase Ζ, lowercase ζ; grc, ζῆτα, el, ζήτα, label= Demotic Greek, classical or ''zē̂ta''; ''zíta'') is the sixth letter of the Greek alphabet. In the system of Greek numerals, it has a value of 7. It was derived f ...
stabilized pinch machine was being built at the far end of the former runway. ZETA was, by far, the largest and most powerful fusion machine to date. Supported by experiments on earlier designs that had been modified to include stabilization, ZETA intended to produce low levels of fusion reactions. This was apparently a great success, and in January 1958, they announced the fusion had been achieved in ZETA based on the release of neutrons and measurements of the plasma temperature.
Vitaly Shafranov
Vitaly Dmitrievich Shafranov (russian: Виталий Дмитриевич Шафранов; December 1, 1929 – June 9, 2014) was a Russian theoretical physicist and Academician who worked with plasma physics and thermonuclear fusion research.
...
and Stanislav Braginskii examined the news reports and attempted to figure out how it worked. One possibility they considered was the use of weak "frozen in" fields, but rejected this, believing the fields would not last long enough. They then concluded ZETA was essentially identical to the devices they had been studying, with strong external fields.
First tokamaks
By this time, Soviet researchers had decided to build a larger toroidal machine along the lines suggested by Sakharov. In particular, their design considered one important point found in Kruskal's and Shafranov's works; if the helical path of the particles made them circulate around the plasma's circumference more rapidly than they circulated the long axis of the torus, the kink instability would be strongly suppressed.[
Today this basic concept is known as the '']safety factor
In engineering, a factor of safety (FoS), also known as (and used interchangeably with) safety factor (SF), expresses how much stronger a system is than it needs to be for an intended load. Safety factors are often calculated using detailed analy ...
''. The ratio of the number of times the particle orbits the major axis compared to the minor axis is denoted ''q'', and the ''Kruskal-Shafranov Limit'' stated that the kink will be suppressed as long as ''q'' > 1. This path is controlled by the relative strengths of the external magnets compared to the field created by the internal current. To have ''q'' > 1, the external magnets must be much more powerful, or alternatively, the internal current has to be reduced.[
Following this criterion, design began on a new reactor, T-1, which today is known as the first real tokamak.][ T-1 used both stronger external magnets and a reduced current compared to stabilized pinch machines like ZETA. The success of the T-1 resulted in its recognition as the first working tokamak.][
For his work on "powerful impulse discharges in a gas, to obtain unusually high temperatures needed for thermonuclear processes", Yavlinskii was awarded the Lenin Prize and the ]Stalin Prize Stalin Prize may refer to:
* The State Stalin Prize in science and engineering and in arts, awarded 1941 to 1954, later known as the USSR State Prize
The USSR State Prize (russian: links=no, Государственная премия СССР, ...
in 1958. Yavlinskii was already preparing the design of an even larger model, later built as T-3. With the apparently successful ZETA announcement, Yavlinskii's concept was viewed very favourably.
Details of ZETA became public in a series of articles in ''Nature'' later in January. To Shafranov's surprise, the system did use the "frozen in" field concept. He remained sceptical, but a team at the Ioffe Institute
The Ioffe Physical-Technical Institute of the Russian Academy of Sciences (for short, Ioffe Institute, russian: Физико-технический институт им. А. Ф. Иоффе) is one of Russia's largest research centers specialized ...
in St. Petersberg began plans to build a similar machine known as Alpha. Only a few months later, in May, the ZETA team issued a release stating they had not achieved fusion, and that they had been misled by erroneous measures of the plasma temperature.
T-1 began operation at the end of 1958. It demonstrated very high energy losses through radiation. This was traced to impurities in the plasma due to the vacuum system causing outgassing from the container materials. In order to explore solutions to this problem, another small device was constructed, T-2. This used an internal liner of corrugated metal that was baked at to cook off trapped gasses.
Atoms for Peace and the doldrums
As part of the second Atoms for Peace
"Atoms for Peace" was the title of a speech delivered by U.S. President Dwight D. Eisenhower to the UN General Assembly in New York City on December 8, 1953.
The United States then launched an "Atoms for Peace" program that supplied equipment ...
meeting in Geneva
, neighboring_municipalities= Carouge, Chêne-Bougeries, Cologny, Lancy, Grand-Saconnex, Pregny-Chambésy, Vernier, Veyrier
, website = https://www.geneve.ch/
Geneva ( ; french: Genève ) frp, Genèva ; german: link=no, Genf ; it, Ginevr ...
in September 1958, the Soviet delegation released many papers covering their fusion research. Among them was a set of initial results on their toroidal machines, which at that point had shown nothing of note.
The "star" of the show was a large model of Spitzer's stellarator, which immediately caught the attention of the Soviets. In contrast to their designs, the stellarator produced the required twisted paths in the plasma without driving a current through it, using a series of magnets that could operate in the steady state rather than the pulses of the induction system. Kurchatov began asking Yavlinskii to change their T-3 design to a stellarator, but they convinced him that the current provided a useful second role in heating, something the stellarator lacked.
At the time of the show, the stellarator had suffered a long string of minor problems that were just being solved. Solving these revealed that the diffusion rate of the plasma was much faster than theory predicted. Similar problems were seen in all the contemporary designs, for one reason or another. The stellarator, various pinch concepts and the magnetic mirror
A magnetic mirror, known as a magnetic trap (магнитный захват) in Russia and briefly as a pyrotron in the US, is a type of magnetic confinement device used in fusion power to trap high temperature plasma using magnetic fields. T ...
machines in both the US and USSR all demonstrated problems that limited their confinement times.
From the first studies of controlled fusion, there was a problem lurking in the background. During the Manhattan Project, David Bohm
David Joseph Bohm (; 20 December 1917 – 27 October 1992) was an American-Brazilian-British scientist who has been described as one of the most significant theoretical physicists of the 20th centuryPeat 1997, pp. 316-317 and who contributed ...
had been part of the team working on isotopic separation of uranium
Uranium is a chemical element with the symbol U and atomic number 92. It is a silvery-grey metal in the actinide series of the periodic table. A uranium atom has 92 protons and 92 electrons, of which 6 are valence electrons. Uranium is weak ...
. In the post-war era he continued working with plasmas in magnetic fields. Using basic theory, one would expect the plasma to diffuse across the lines of force at a rate inversely proportional to the square of the strength of the field, meaning that small increases in force would greatly improve confinement. But based on their experiments, Bohm developed an empirical formula, now known as Bohm diffusion The diffusion of plasma across a magnetic field was conjectured to follow the Bohm diffusion scaling as indicated from the early plasma experiments of very lossy machines. This predicted that the rate of diffusion was linear with temperature and ...
, that suggested the rate was linear with the magnetic force, not its square.
If Bohm's formula was correct, there was no hope one could build a fusion reactor based on magnetic confinement. To confine the plasma at the temperatures needed for fusion, the magnetic field would have to be orders of magnitude greater than any known magnet. Spitzer ascribed the difference between the Bohm and classical diffusion rates to turbulence in the plasma, and believed the steady fields of the stellarator would not suffer from this problem. Various experiments at that time suggested the Bohm rate did not apply, and that the classical formula was correct.
But by the early 1960s, with all of the various designs leaking plasma at a prodigious rate, Spitzer himself concluded that the Bohm scaling was an inherent quality of plasmas, and that magnetic confinement would not work. The entire field descended into what became known as "the doldrums", a period of intense pessimism.
Progress in the 1960s
In contrast to the other designs, the experimental tokamaks appeared to be progressing well, so well that a minor theoretical problem was now a real concern. In the presence of gravity, there is a small pressure gradient in the plasma, formerly small enough to ignore but now becoming something that had to be addressed. This led to the addition of yet another set of magnets in 1962, which produced a vertical field that offset these effects. These were a success, and by the mid-1960s the machines began to show signs that they were beating the Bohm limit.
At the 1965 Second International Atomic Energy Agency Conference on fusion at the UK's newly opened Culham Centre for Fusion Energy
The Culham Centre for Fusion Energy (CCFE) is the UK's national laboratory for fusion research. It is located at the Culham Science Centre, near Culham, Oxfordshire, and is the site of the Joint European Torus (JET), Mega Ampere Spherical Tokam ...
, Artsimovich reported that their systems were surpassing the Bohm limit by 10 times. Spitzer, reviewing the presentations, suggested that the Bohm limit may still apply; the results were within the range of experimental error of results seen on the stellarators, and the temperature measurements, based on the magnetic fields, were simply not trustworthy.
The next major international fusion meeting was held in August 1968 in Novosibirsk. By this time two additional tokamak designs had been completed, TM-2 in 1965, and T-4 in 1968. Results from T-3 had continued to improve, and similar results were coming from early tests of the new reactors. At the meeting, the Soviet delegation announced that T-3 was producing electron temperatures of 1000 eV (equivalent to 10 million degrees Celsius) and that confinement time was at least 50 times the Bohm limit.
These results were at least 10 times that of any other machine. If correct, they represented an enormous leap for the fusion community. Spitzer remained sceptical, noting that the temperature measurements were still based on the indirect calculations from the magnetic properties of the plasma. Many concluded they were due to an effect known as runaway electrons The term runaway electrons (RE) is used to denote electrons that undergo free fall acceleration into the realm of relativistic particles. REs may be classified as thermal (lower energy) or relativistic. The study of runaway electrons is thought to ...
, and that the Soviets were measuring only those extremely energetic electrons and not the bulk temperature. The Soviets countered with several arguments suggesting the temperature they were measuring was Maxwellian, and the debate raged.
Culham Five
In the aftermath of ZETA, the UK teams began the development of new plasma diagnostic tools to provide more accurate measurements. Among these was the use of a laser
A laser is a device that emits light through a process of optical amplification based on the stimulated emission of electromagnetic radiation. The word "laser" is an acronym for "light amplification by stimulated emission of radiation". The fi ...
to directly measure the temperature of the bulk electrons using Thomson scattering
Thomson scattering is the elastic scattering of electromagnetic radiation by a free charged particle, as described by classical electromagnetism. It is the low-energy limit of Compton scattering: the particle's kinetic energy and photon frequen ...
. This technique was well known and respected in the fusion community; Artsimovich had publicly called it "brilliant". Artsimovich invited Bas Pease
Rendel Sebastian "Bas" Pease FRS (2 November 1922 – 17 October 2004) was a British physicist who strongly opposed nuclear weapons while advocating the use of nuclear fusion as a clean source of power.
Biography
Pease was born at 9 Brunswick ...
, the head of Culham, to use their devices on the Soviet reactors. At the height of the cold war, in what is still considered a major political manoeuvre on Artsimovich's part, British physicists were allowed to visit the Kurchatov Institute, the heart of the Soviet nuclear bomb effort.
The British team, nicknamed "The Culham Five", arrived late in 1968. After a lengthy installation and calibration process, the team measured the temperatures over a period of many experimental runs. Initial results were available by August 1969; the Soviets were correct, their results were accurate. The team phoned the results home to Culham, who then passed them along in a confidential phone call to Washington. The final results were published in ''Nature'' in November 1969. The results of this announcement have been described as a "veritable stampede" of tokamak construction around the world.
One serious problem remained. Because the electrical current in the plasma was much lower and produced much less compression than a pinch machine, this meant the temperature of the plasma was limited to the resistive heating rate of the current. First proposed in 1950, Spitzer resistivity The Spitzer resistivity (or plasma resistivity) is an expression describing the electrical resistance in a plasma, which was first formulated by Lyman Spitzer in 1950. The Spitzer resistivity of a plasma decreases in proportion to the electron temp ...
stated that the electrical resistance
The electrical resistance of an object is a measure of its opposition to the flow of electric current. Its reciprocal quantity is , measuring the ease with which an electric current passes. Electrical resistance shares some conceptual paralle ...
of a plasma was reduced as the temperature increased, meaning the heating rate of the plasma would slow as the devices improved and temperatures were pressed higher. Calculations demonstrated that the resulting maximum temperatures while staying within ''q'' > 1 would be limited to the low millions of degrees. Artsimovich had been quick to point this out in Novosibirsk, stating that future progress would require new heating methods to be developed.
US turmoil
One of the people attending the Novosibirsk meeting in 1968 was Amasa Stone Bishop
Amasa Stone Bishop (1921 – May 21, 1997) was an American nuclear physicist specializing in fusion physics. He received his B.S. in physics from the California Institute of Technology in 1943. From 1943 to 1946 he was a member of the staff of R ...
, one of the leaders of the US fusion program. One of the few other devices to show clear evidence of beating the Bohm limit at that time was the multipole
A multipole expansion is a mathematical series representing a function that depends on angles—usually the two angles used in the spherical coordinate system (the polar and azimuthal angles) for three-dimensional Euclidean space, \R^3. Similarly ...
concept. Both Lawrence Livermore and the Princeton Plasma Physics Laboratory
Princeton Plasma Physics Laboratory (PPPL) is a United States Department of Energy national laboratory for plasma physics and nuclear fusion science. Its primary mission is research into and development of fusion as an energy source. It is known ...
(PPPL), home of Spitzer's stellarator, were building variations on the multipole design. While moderately successful on their own, T-3 greatly outperformed either machine. Bishop was concerned that the multipoles were redundant and thought the US should consider a tokamak of its own.
When he raised the issue at a December 1968 meeting, directors of the labs refused to consider it. Melvin B. Gottlieb of Princeton was exasperated, asking "Do you think that this committee can out-think the scientists?" With the major labs demanding they control their own research, one lab found itself left out. Oak Ridge had originally entered the fusion field with studies for reactor fueling systems, but branched out into a mirror program of their own. By the mid-1960s, their DCX designs were running out of ideas, offering nothing that the similar program at the more prestigious and politically powerful Livermore didn't. This made them highly receptive to new concepts.
After a considerable internal debate, Herman Postma formed a small group in early 1969 to consider the tokamak. They came up with a new design, later christened Ormak, that had several novel features. Primary among them was the way the external field was created in a single large copper block, fed power from a large transformer
A transformer is a passive component that transfers electrical energy from one electrical circuit to another circuit, or multiple circuits. A varying current in any coil of the transformer produces a varying magnetic flux in the transformer' ...
below the torus. This was as opposed to traditional designs that used magnet windings on the outside. They felt the single block would produce a much more uniform field. It would also have the advantage of allowing the torus to have a smaller major radius, lacking the need to route cables through the donut hole, leading to a lower '' aspect ratio'', which the Soviets had already suggested would produce better results.
Tokamak race in the US
In early 1969, Artsimovich visited MIT
The Massachusetts Institute of Technology (MIT) is a private land-grant research university in Cambridge, Massachusetts. Established in 1861, MIT has played a key role in the development of modern technology and science, and is one of the m ...
, where he was hounded by those interested in fusion. He finally agreed to give several lectures in April and then allowed lengthy question-and-answer sessions. As these went on, MIT itself grew interested in the tokamak, having previously stayed out of the fusion field for a variety of reasons. Bruno Coppi
Bruno Coppi (born 19 November 1935 in Gonzaga, Lombardy, Italy) is an Italian-American physicist specializing in plasma physics.
In 1959, Coppi attained an Italian doctoral degree at Polytechnic University of Milan and was subsequently a docent ...
was at MIT at the time, and following the same concepts as Postma's team, came up with his own low-aspect-ratio concept, Alcator
Alcator C-Mod was a tokamak (a type of magnetically confined fusion device) that operated between 1991 and 2016 at the Massachusetts Institute of Technology (MIT) Plasma Science and Fusion Center (PSFC). Notable for its high toroidal magnetic ...
. Instead of Ormak's toroidal transformer, Alcator used traditional ring-shaped magnets but required them to be much smaller than existing designs. MIT's Francis Bitter Magnet Laboratory
The MIT School of Science is one of the five schools of the Massachusetts Institute of Technology, located in Cambridge, Massachusetts, United States. The School is composed of 6 academic departments who grant SB, SM, and PhD or ScD degrees; as ...
was the world leader in magnet design and they were confident they could build them.
During 1969, two additional groups entered the field. At General Atomics
General Atomics is an American energy and defense corporation headquartered in San Diego, California, specializing in research and technology development. This includes physics research in support of nuclear fission and nuclear fusion energy. Th ...
, Tihiro Ohkawa
was a Japanese physicist whose field of work was in plasma physics and fusion power. He was a pioneer in developing ways to generate electricity by nuclear fusion when he worked at General Atomics. Ohkawa died September 27, 2014 in La Jolla, Cal ...
had been developing multipole reactors, and submitted a concept based on these ideas. This was a tokamak that would have a non-circular plasma cross-section; the same math that suggested a lower aspect-ratio would improve performance also suggested that a C or D-shaped plasma would do the same. He called the new design Doublet. Meanwhile, a group at University of Texas at Austin
The University of Texas at Austin (UT Austin, UT, or Texas) is a public research university in Austin, Texas. It was founded in 1883 and is the oldest institution in the University of Texas System. With 40,916 undergraduate students, 11,07 ...
was proposing a relatively simple tokamak to explore heating the plasma through deliberately induced turbulence, the Texas Turbulent Tokamak.
When the members of the Atomic Energy Commissions' Fusion Steering Committee met again in June 1969, they had "tokamak proposals coming out of our ears." The only major lab working on a toroidal design that was not proposing a tokamak was Princeton, who refused to consider it in spite of their Model C stellarator being just about perfect for such a conversion. They continued to offer a long list of reasons why the Model C should not be converted. When these were questioned, a furious debate broke out about whether the Soviet results were reliable.
Watching the debate take place, Gottlieb had a change of heart. There was no point moving forward with the tokamak if the Soviet electron temperature measurements were not accurate, so he formulated a plan to either prove or disprove their results. While swimming in the pool during the lunch break, he told Harold Furth his plan, to which Furth replied: "well, maybe you're right." After lunch, the various teams presented their designs, at which point Gottlieb presented his idea for a "stellarator-tokamak" based on the Model C.
The Standing Committee noted that this system could be complete in six months, while Ormak would take a year. It was only a short time later that the confidential results from the Culham Five were released. When they met again in October, the Standing Committee released funding for all of these proposals. The Model C's new configuration, soon named Symmetrical Tokamak
Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definit ...
, intended to simply verify the Soviet results, while the others would explore ways to go well beyond T-3.
Heating: US takes the lead
Experiments on the Symmetric Tokamak began in May 1970, and by early the next year they had confirmed the Soviet results and then surpassed them. The stellarator was abandoned, and PPPL turned its considerable expertise to the problem of heating the plasma. Two concepts seemed to hold promise. PPPL proposed using magnetic compression, a pinch-like technique to compress a warm plasma to raise its temperature, but providing that compression through magnets rather than current. Oak Ridge suggested neutral beam injection
Neutral-beam injection (NBI) is one method used to heat plasma inside a fusion device consisting in a beam of high-energy neutral particles that can enter the magnetic confinement field. When these neutral particles are ionized by collision with ...
, small particle accelerators that would shoot fuel atoms through the surrounding magnetic field where they would collide with the plasma and heat it.
PPPL's Adiabatic Toroidal Compressor (ATC) began operation in May 1972, followed shortly thereafter by a neutral-beam equipped Ormak. Both demonstrated significant problems, but PPPL leapt past Oak Ridge by fitting beam injectors to ATC and provided clear evidence of successful heating in 1973. This success "scooped" Oak Ridge, who fell from favour within the Washington Steering Committee.
By this time a much larger design based on beam heating was under construction, the Princeton Large Torus
The Princeton Large Torus (or PLT), was an early tokamak built at the Princeton Plasma Physics Laboratory (PPPL). It was one of the first large scale tokamak machines, and among the most powerful in terms of current and magnetic fields. Originally ...
, or PLT. PLT was designed specifically to "give a clear indication whether the tokamak concept plus auxiliary heating can form a basis for a future fusion reactor". PLT was an enormous success, continually raising its internal temperature until it hit 60 million Celsius (8,000 eV, eight times T-3's record) in 1978. This is a key point in the development of the tokamak; fusion reactions become self-sustaining at temperatures between 50 and 100 million Celsius, PLT demonstrated that this was technically achievable.[
These experiments, especially PLT, put the US far in the lead in tokamak research. This is due largely to budget; a tokamak cost about $500,000 and the US annual fusion budget was around $25 million at that time. They could afford to explore all of the promising methods of heating, ultimately discovering neutral beams to be among the most effective.
During this period, Robert Hirsch took over the Directorate of fusion development in the ]U.S. Atomic Energy Commission
The United States Atomic Energy Commission (AEC) was an agency of the United States government established after World War II by U.S. Congress to foster and control the peacetime development of atomic science and technology. President ...
. Hirsch felt that the program could not be sustained at its current funding levels without demonstrating tangible results. He began to reformulate the entire program. What had once been a lab-led effort of mostly scientific exploration was now a Washington-led effort to build a working power-producing reactor. This was given a boost by the 1973 oil crisis, which led to greatly increased research into alternative energy systems.
1980s: great hope, great disappointment
By the late-1970s, tokamaks had reached all the conditions needed for a practical fusion reactor; in 1978 PLT had demonstrated ignition temperatures, the next year the Soviet T-7 successfully used superconducting
Superconductivity is a set of physical properties observed in certain materials where electrical resistance vanishes and magnetic flux fields are expelled from the material. Any material exhibiting these properties is a superconductor. Unlike ...
magnets for the first time, Doublet proved to be a success and led to almost all future designs adopting this "shaped plasma" approach. It appeared all that was needed to build a power-producing reactor was to put all of these design concepts into a single machine, one that would be capable of running with the radioactive tritium
Tritium ( or , ) or hydrogen-3 (symbol T or H) is a rare and radioactive isotope of hydrogen with half-life about 12 years. The nucleus of tritium (t, sometimes called a ''triton'') contains one proton and two neutrons, whereas the nucleus of ...
in its fuel mix.
The race was on. During the 1970s, four major second-generation proposals were funded worldwide. The Soviets continued their development lineage with the T-15, while a pan-European effort was developing the Joint European Torus
The Joint European Torus, or JET, is an operational Magnetic confinement fusion, magnetically confined Plasma (physics), plasma physics experiment, located at Culham Centre for Fusion Energy in Oxfordshire, United Kingdom, UK. Based on a tokamak ...
(JET) and Japan began the JT-60
JT-60 (short for Japan Torus-60) is a large research tokamak, the flagship of Japan's magnetic fusion program, previously run by the Japan Atomic Energy Research Institute (JAERI) and currently run by the Japan Atomic Energy Agency's (JAEA) Naka ...
effort (originally known as the "Breakeven Plasma Test Facility"). In the US, Hirsch began formulating plans for a similar design, skipping over proposals for another stepping-stone design directly to a tritium-burning one. This emerged as the Tokamak Fusion Test Reactor
The Tokamak Fusion Test Reactor (TFTR) was an experimental tokamak built at Princeton Plasma Physics Laboratory (PPPL) circa 1980 and entering service in 1982. TFTR was designed with the explicit goal of reaching scientific breakeven, the point w ...
(TFTR), run directly from Washington and not linked to any specific lab. Originally favouring Oak Ridge as the host, Hirsch moved it to PPPL after others convinced him they would work the hardest on it because they had the most to lose.
The excitement was so widespread that several commercial ventures to produce commercial tokamaks began around this time. Best known among these, in 1978, Bob Guccione
Robert Charles Joseph Edward Sabatini Guccione ( ; December 17, 1930 – October 20, 2010) was an American photographer and publisher. He founded the adult magazine '' Penthouse'' in 1965. This was aimed at competing with Hugh Hefner's ''Playboy' ...
, publisher of Penthouse Magazine
''Penthouse'' is a men's magazine founded by Bob Guccione. It combines urban lifestyle articles and softcore pornographic pictures of women that, in the 1990s, evolved into hardcore pornographic pictures of women.
Although Guccione was Americ ...
, met Robert Bussard
Robert W. Bussard (August 11, 1928 – October 6, 2007) was an American physicist who worked primarily in nuclear fusion energy research. He was the recipient of the Schreiber-Spence Achievement Award for STAIF-2004. He was also a fellow of th ...
and became the world's biggest and most committed private investor in fusion technology, ultimately putting $20 million of his own money into Bussard's Compact Tokamak. Funding by the Riggs Bank
Riggs Bank was a bank headquartered in Washington, D.C. For most of its history, it was the largest bank headquartered in that city. On May 13, 2005, after the exposure of several money laundering scandals, the bank was acquired by PNC Financia ...
led to this effort being known as the Riggatron.
TFTR won the construction race and began operation in 1982, followed shortly by JET in 1983 and JT-60 in 1985. JET quickly took the lead in critical experiments, moving from test gases to deuterium and increasingly powerful "shots". But it soon became clear that none of the new systems were working as expected. A host of new instabilities appeared, along with a number of more practical problems that continued to interfere with their performance. On top of this, dangerous "excursions" of the plasma hitting with the walls of the reactor were evident in both TFTR and JET. Even when working perfectly, plasma confinement at fusion temperatures, the so-called "fusion triple product
The Lawson criterion is a figure of merit used in nuclear fusion research. It compares the rate of energy being generated by fusion reactions within the fusion fuel to the rate of energy losses to the environment. When the rate of production is ...
", continued to be far below what would be needed for a practical reactor design.
Through the mid-1980s the reasons for many of these problems became clear, and various solutions were offered. However, these would significantly increase the size and complexity of the machines. A follow-on design incorporating these changes would be both enormous and vastly more expensive than either JET or TFTR. A new period of pessimism descended on the fusion field.
ITER
At the same time these experiments were demonstrating problems, much of the impetus for the US's massive funding disappeared; in 1986 Ronald Reagan declared the 1970s energy crisis
The 1970s energy crisis occurred when the Western world, particularly the United States, Canada, Western Europe, Australia, and New Zealand, faced substantial petroleum shortages as well as elevated prices. The two worst crises of this period wer ...
was over, and funding for advanced energy sources had been slashed in the early 1980s.
Some thought of an international reactor design had been ongoing since June 1973 under the name INTOR, for INternational TOkamak Reactor. This was originally started through an agreement between Richard Nixon
Richard Milhous Nixon (January 9, 1913April 22, 1994) was the 37th president of the United States, serving from 1969 to 1974. A member of the Republican Party, he previously served as a representative and senator from California and was ...
and Leonid Brezhnev
Leonid Ilyich Brezhnev; uk, links= no, Леонід Ілліч Брежнєв, . (19 December 1906– 10 November 1982) was a Soviet politician who served as General Secretary of the Communist Party of the Soviet Union between 1964 and ...
, but had been moving slowly since its first real meeting on 23 November 1978.
During the Geneva Summit in November 1985, Reagan raised the issue with Mikhail Gorbachev and proposed reforming the organization. "... The two leaders emphasized the potential importance of the work aimed at utilizing controlled thermonuclear fusion for peaceful purposes and, in this connection, advocated the widest practicable development of international cooperation in obtaining this source of energy, which is essentially inexhaustible, for the benefit for all mankind."
The next year, an agreement was signed between the US, Soviet Union, European Union and Japan, creating the International Thermonuclear Experimental Reactor
ITER (initially the International Thermonuclear Experimental Reactor, ''iter'' meaning "the way" or "the path" in Latin) is an international nuclear fusion research and engineering megaproject aimed at creating energy by replicating, on Earth ...
organization.
Design work began in 1988, and since that time the ITER reactor has been the primary tokamak design effort worldwide.
Design
Basic problem
Positively charged ion
An ion () is an atom or molecule with a net electrical charge.
The charge of an electron is considered to be negative by convention and this charge is equal and opposite to the charge of a proton, which is considered to be positive by conve ...
s and negatively charged electron
The electron ( or ) is a subatomic particle with a negative one elementary electric charge. Electrons belong to the first generation of the lepton particle family,
and are generally thought to be elementary particles because they have no ...
s in a fusion plasma are at very high temperatures, and have correspondingly large velocities. In order to maintain the fusion process, particles from the hot plasma must be confined in the central region, or the plasma will rapidly cool. Magnetic confinement fusion devices exploit the fact that charged particles in a magnetic field experience a Lorentz force and follow helical paths along the field lines.
The simplest magnetic confinement system is a solenoid. A plasma in a solenoid will spiral about the lines of field running down its center, preventing motion towards the sides. However, this does not prevent motion towards the ends. The obvious solution is to bend the solenoid around into a circle, forming a torus. However, it was demonstrated that such an arrangement is not uniform; for purely geometric reasons, the field on the outside edge of the torus is lower than on the inside edge. This asymmetry causes the electrons and ions to drift across the field, and eventually hit the walls of the torus.
The solution is to shape the lines so they do not simply run around the torus, but twist around like the stripes on a barber pole or candycane. In such a field any single particle will find itself at the outside edge where it will drift one way, say up, and then as it follows its magnetic line around the torus it will find itself on the inside edge, where it will drift the other way. This cancellation is not perfect, but calculations showed it was enough to allow the fuel to remain in the reactor for a useful time.
Tokamak solution
The two first solutions to making a design with the required twist were the stellarator
A stellarator is a plasma device that relies primarily on external magnets to confine a plasma. Scientists researching magnetic confinement fusion aim to use stellarator devices as a vessel for nuclear fusion reactions. The name refers to the ...
which did so through a mechanical arrangement, twisting the entire torus, and the z-pinch
In fusion power research, the Z-pinch (zeta pinch) is a type of plasma confinement system that uses an electric current in the plasma to generate a magnetic field that compresses it (see pinch). These systems were originally referred to simp ...
design which ran an electrical current through the plasma to create a second magnetic field to the same end. Both demonstrated improved confinement times compared to a simple torus, but both also demonstrated a variety of effects that caused the plasma to be lost from the reactors at rates that were not sustainable.
The tokamak is essentially identical to the z-pinch concept in its physical layout. Its key innovation was the realization that the instabilities that were causing the pinch to lose its plasma could be controlled. The issue was how "twisty" the fields were; fields that caused the particles to transit inside and out more than once per orbit around the long axis torus were much more stable than devices that had less twist. This ratio of twists to orbits became known as the ''safety factor
In engineering, a factor of safety (FoS), also known as (and used interchangeably with) safety factor (SF), expresses how much stronger a system is than it needs to be for an intended load. Safety factors are often calculated using detailed analy ...
'', denoted ''q''. Previous devices operated at ''q'' about , while the tokamak operates at ''q'' >> 1. This increases stability by orders of magnitude.
When the problem is considered even more closely, the need for a vertical (parallel to the axis of rotation) component of the magnetic field arises. The Lorentz force of the toroidal plasma current in the vertical field provides the inward force that holds the plasma torus in equilibrium.
Other issues
While the tokamak addresses the issue of plasma stability in a gross sense, plasmas are also subject to a number of dynamic instabilities. One of these, the kink instability
A kink instability (also kink oscillation or kink mode), is a current-driven plasma instability characterized by transverse displacements of a plasma column's cross-section from its center of mass without any change in the characteristics of the ...
, is strongly suppressed by the tokamak layout, a side-effect of the high safety factors of tokamaks. The lack of kinks allowed the tokamak to operate at much higher temperatures than previous machines, and this allowed a host of new phenomena to appear.
One of these, the banana orbits, is caused by the wide range of particle energies in a tokamak – much of the fuel is hot but a certain percentage is much cooler. Due to the high twist of the fields in the tokamak, particles following their lines of force rapidly move towards the inner edge and then outer. As they move inward they are subject to increasing magnetic fields due to the smaller radius concentrating the field. The low-energy particles in the fuel will reflect off this increasing field and begin to travel backwards through the fuel, colliding with the higher energy nuclei and scattering them out of the plasma. This process causes fuel to be lost from the reactor, although this process is slow enough that a practical reactor is still well within reach.
Breakeven, Q, and ignition
One of the first goals for any controlled fusion device is to reach ''breakeven
Break-even (or break even), often abbreviated as B/E in finance, (sometimes called point of equilibrium) is the point of balance making neither a profit nor a loss. Any number below the break-even point constitutes a loss while any number above i ...
'', the point where the energy being released by the fusion reactions is equal to the amount of energy being used to maintain the reaction. The ratio of output to input energy is denoted ''Q'', and breakeven corresponds to a ''Q'' of 1. A ''Q'' of more than one is needed for the reactor to generate net energy, but for practical reasons, it is desirable for it to be much higher.
Once breakeven is reached, further improvements in confinement generally lead to a rapidly increasing ''Q''. That is because some of the energy being given off by the fusion reactions of the most common fusion fuel, a 50-50 mix of deuterium
Deuterium (or hydrogen-2, symbol or deuterium, also known as heavy hydrogen) is one of two stable isotopes of hydrogen (the other being protium, or hydrogen-1). The nucleus of a deuterium atom, called a deuteron, contains one proton and one ...
and tritium
Tritium ( or , ) or hydrogen-3 (symbol T or H) is a rare and radioactive isotope of hydrogen with half-life about 12 years. The nucleus of tritium (t, sometimes called a ''triton'') contains one proton and two neutrons, whereas the nucleus of ...
, is in the form of alpha particle
Alpha particles, also called alpha rays or alpha radiation, consist of two protons and two neutrons bound together into a particle identical to a helium-4 nucleus. They are generally produced in the process of alpha decay, but may also be pr ...
s. These can collide with the fuel nuclei in the plasma and heat it, reducing the amount of external heat needed. At some point, known as ''ignition'', this internal self-heating is enough to keep the reaction going without any external heating, corresponding to an infinite ''Q''.
In the case of the tokamak, this self-heating process is maximized if the alpha particles remain in the fuel long enough to guarantee they will collide with the fuel. As the alphas are electrically charged, they are subject to the same fields that are confining the fuel plasma. The amount of time they spend in the fuel can be maximized by ensuring their orbit in the field remains within the plasma. It can be demonstrated that this occurs when the electrical current in the plasma is about 3 MA.
Advanced tokamaks
In the early 1970s, studies at Princeton into the use of high-power superconducting magnets in future tokamak designs examined the layout of the magnets. They noticed that the arrangement of the main toroidal coils meant that there was significantly more tension between the magnets on the inside of the curvature where they were closer together. Considering this, they noted that the tensional forces within the magnets would be evened out if they were shaped like a D, rather than an O. This became known as the "Princeton D-coil".
This was not the first time this sort of arrangement had been considered, although for entirely different reasons. The safety factor varies across the axis of the machine; for purely geometrical reasons, it is always smaller at the inside edge of the plasma closest to the machine's center because the long axis is shorter there. That means that a machine with an average ''q'' = 2 might still be less than 1 in certain areas. In the 1970s, it was suggested that one way to counteract this and produce a design with a higher average ''q'' would be to shape the magnetic fields so that the plasma only filled the outer half of the torus, shaped like a D or C when viewed end-on, instead of the normal circular cross section.
One of the first machines to incorporate a D-shaped plasma was the JET, which began its design work in 1973. This decision was made both for theoretical reasons as well as practical; because the force is larger on the inside edge of the torus, there is a large net force pressing inward on the entire reactor. The D-shape also had the advantage of reducing the net force, as well as making the supported inside edge flatter so it was easier to support. Code exploring the general layout noticed that a non-circular shape would slowly drift vertically, which led to the addition of an active feedback system to hold it in the center. Once JET had selected this layout, the General Atomics
General Atomics is an American energy and defense corporation headquartered in San Diego, California, specializing in research and technology development. This includes physics research in support of nuclear fission and nuclear fusion energy. Th ...
Doublet III team redesigned that machine into the D-IIID with a D-shaped cross-section, and it was selected for the Japanese JT-60
JT-60 (short for Japan Torus-60) is a large research tokamak, the flagship of Japan's magnetic fusion program, previously run by the Japan Atomic Energy Research Institute (JAERI) and currently run by the Japan Atomic Energy Agency's (JAEA) Naka ...
design as well. This layout has been largely universal since then.
One problem seen in all fusion reactors is that the presence of heavier elements causes energy to be lost at an increased rate, cooling the plasma. During the very earliest development of fusion power, a solution to this problem was found, the ''divertor
In nuclear fusion power research, a divertor is a device within a tokamak or a stellarator that allows the online removal of waste material from the plasma while the reactor is still operating. This allows control over the buildup of fusion pro ...
'', essentially a large mass spectrometer
Mass spectrometry (MS) is an analytical technique that is used to measure the mass-to-charge ratio of ions. The results are presented as a '' mass spectrum'', a plot of intensity as a function of the mass-to-charge ratio. Mass spectrometry is us ...
that would cause the heavier elements to be flung out of the reactor. This was initially part of the stellarator
A stellarator is a plasma device that relies primarily on external magnets to confine a plasma. Scientists researching magnetic confinement fusion aim to use stellarator devices as a vessel for nuclear fusion reactions. The name refers to the ...
designs, where it is easy to integrate into the magnetic windings. However, designing a divertor for a tokamak proved to be a very difficult design problem.
Another problem seen in all fusion designs is the heat load that the plasma places on the wall of the confinement vessel. There are materials that can handle this load, but they are generally undesirable and expensive heavy metals. When such materials are sputtered in collisions with hot ions, their atoms mix with the fuel and rapidly cool it. A solution used on most tokamak designs is the ''limiter'', a small ring of light metal that projected into the chamber so that the plasma would hit it before hitting the walls. This eroded the limiter and caused its atoms to mix with the fuel, but these lighter materials cause less disruption than the wall materials.
When reactors moved to the D-shaped plasmas it was quickly noted that the escaping particle flux of the plasma could be shaped as well. Over time, this led to the idea of using the fields to create an internal divertor that flings the heavier elements out of the fuel, typically towards the bottom of the reactor. There, a pool of liquid lithium
Lithium (from el, λίθος, lithos, lit=stone) is a chemical element with the symbol Li and atomic number 3. It is a soft, silvery-white alkali metal. Under standard conditions, it is the least dense metal and the least dense solid ...
metal is used as a sort of limiter; the particles hit it and are rapidly cooled, remaining in the lithium. This internal pool is much easier to cool, due to its location, and although some lithium atoms are released into the plasma, its very low mass makes it a much smaller problem than even the lightest metals used previously.
As machines began to explore this newly shaped plasma, they noticed that certain arrangements of the fields and plasma parameters would sometimes enter what is now known as the high-confinement mode High-confinement mode, or H-mode, is an operating mode possible in toroidal magnetic confinement fusion devices mostly tokamaks, but also in stellarators.[bootstrap current In a toroidal fusion power device, a plasma is confined within a donut-shaped cylinder. If the gas pressure of the plasma varies across the radius of the cylinder, a self-generated current will spontaneously arise within the plasma, due to collisi ...]
''. This allows a properly designed reactor to generate some of the internal current needed to twist the magnetic field lines without having to supply it from an external source. This has a number of advantages, and modern designs all attempt to generate as much of their total current through the bootstrap process as possible.
By the early 1990s, the combination of these features and others collectively gave rise to the "advanced tokamak" concept. This forms the basis of modern research, including ITER.
Plasma disruptions
Tokamaks are subject to events known as "disruptions" that cause confinement to be lost in milliseconds. There are two primary mechanisms. In one, the "vertical displacement event" (VDE), the entire plasma moves vertically until it touches the upper or lower section of the vacuum chamber. In the other, the "major disruption", long wavelength, non-axisymmetric magnetohydrodynamical instabilities cause the plasma to be forced into non-symmetrical shapes, often squeezed into the top and bottom of the chamber.
When the plasma touches the vessel walls it undergoes rapid cooling, or "thermal quenching". In the major disruption case, this is normally accompanied by a brief increase in plasma current as the plasma concentrates. Quenching ultimately causes the plasma confinement to break up. In the case of the major disruption the current drops again, the "current quench". The initial increase in current is not seen in the VDE, and the thermal and current quench occurs at the same time.[ In both cases, the thermal and electrical load of the plasma is rapidly deposited on the reactor vessel, which has to be able to handle these loads. ITER is designed to handle 2600 of these events over its lifetime.][Runaway Electrons in Tokamaks and Their Mitigation in ITER]
S. Putvinski, ITER Organization
For modern high-energy devices, where plasma currents are on the order of 15 mega amperes in ITER, it is possible the brief increase in current during a major disruption will cross a critical threshold. This occurs when the current produces a force on the electrons that is higher than the frictional forces of the collisions between particles in the plasma. In this event, electrons can be rapidly accelerated to relativistic velocities, creating so-called "runaway electrons" in the relativistic runaway electron avalanche. These retain their energy even as the current quench is occurring on the bulk of the plasma.[
When confinement finally breaks down, these runaway electrons follow the path of least resistance and impact the side of the reactor. These can reach 12 megaamps of current deposited in a small area, well beyond the capabilities of any mechanical solution.] In one famous case, the Tokamak de Fontenay aux Roses
The Tokamak de Fontenay-aux-Roses (TFR) was the first French tokamak, built in a research centre of the French Atomic Energy Commission (CEA) in Fontenay-aux-Roses, a commune in the southwestern suburbs of Paris, France. Roughly the same size as t ...
had a major disruption where the runaway electrons burned a hole through the vacuum chamber.[
The occurrence of major disruptions in running tokamaks has always been rather high, of the order of a few percent of the total numbers of the shots. In currently operated tokamaks, the damage is often large but rarely dramatic. In the ITER tokamak, it is expected that the occurrence of a limited number of major disruptions will definitively damage the chamber with no possibility to restore the device. The development of systems to counter the effects of runaway electrons is considered a must-have piece of technology for the operational level ITER.][
A large amplitude of the central current density can also result in internal disruptions, or sawteeth, which do not generally result in termination of the discharge.
]
Plasma heating
In an operating fusion reactor, part of the energy generated will serve to maintain the plasma temperature as fresh deuterium
Deuterium (or hydrogen-2, symbol or deuterium, also known as heavy hydrogen) is one of two stable isotopes of hydrogen (the other being protium, or hydrogen-1). The nucleus of a deuterium atom, called a deuteron, contains one proton and one ...
and tritium
Tritium ( or , ) or hydrogen-3 (symbol T or H) is a rare and radioactive isotope of hydrogen with half-life about 12 years. The nucleus of tritium (t, sometimes called a ''triton'') contains one proton and two neutrons, whereas the nucleus of ...
are introduced. However, in the startup of a reactor, either initially or after a temporary shutdown, the plasma will have to be heated to its operating temperature of greater than 10 keV (over 100 million degrees Celsius). In current tokamak (and other) magnetic fusion experiments, insufficient fusion energy is produced to maintain the plasma temperature, and constant external heating must be supplied. Chinese researchers set up the Experimental Advanced Superconducting Tokamak
The Experimental Advanced Superconducting Tokamak (EAST), internal designation HT-7U (Hefei Tokamak 7 Upgrade), is an experimental superconducting tokamak magnetic fusion energy reactor in Hefei, China. The Hefei Institutes of Physical Scienc ...
(EAST) in 2006 which is believed to sustain 100 million degree Celsius plasma (sun has 15 million degree Celsius temperature) which is required to initiate the fusion between hydrogen atoms, according to the latest test conducted in EAST (test conducted in November 2018).
Ohmic heating ~ inductive mode
Since the plasma is an electrical conductor, it is possible to heat the plasma by inducing a current through it; the induced current that provides most of the poloidal field is also a major source of initial heating.
The heating caused by the induced current is called ohmic (or resistive) heating; it is the same kind of heating that occurs in an electric light bulb or in an electric heater. The heat generated depends on the resistance of the plasma and the amount of electric current running through it. But as the temperature of heated plasma rises, the resistance decreases and ohmic heating becomes less effective. It appears that the maximum plasma temperature attainable by ohmic heating in a tokamak is 20–30 million degrees Celsius. To obtain still higher temperatures, additional heating methods must be used.
The current is induced by continually increasing the current through an electromagnetic winding linked with the plasma torus: the plasma can be viewed as the secondary winding of a transformer. This is inherently a pulsed process because there is a limit to the current through the primary (there are also other limitations on long pulses). Tokamaks must therefore either operate for short periods or rely on other means of heating and current drive.
Magnetic compression
A gas can be heated by sudden compression. In the same way, the temperature of a plasma is increased if it is compressed rapidly by increasing the confining magnetic field. In a tokamak, this compression is achieved simply by moving the plasma into a region of higher magnetic field (i.e., radially inward). Since plasma compression brings the ions closer together, the process has the additional benefit of facilitating attainment of the required density for a fusion reactor.
Magnetic compression was an area of research in the early "tokamak stampede", and was the purpose of one major design, the ATC. The concept has not been widely used since then, although a somewhat similar concept is part of the General Fusion
General Fusion is a Canadian company based in Vancouver, British Columbia, which is developing a fusion power device based on magnetized target fusion (MTF). The company was founded in 2002 by Dr. Michel Laberge. The company has more than 200 emp ...
design.
Neutral-beam injection
Neutral-beam injection involves the introduction of high energy (rapidly moving) atoms or molecules into an ohmically heated, magnetically confined plasma within the tokamak.
The high energy atoms originate as ions in an arc chamber before being extracted through a high voltage grid set. The term "ion source" is used to generally mean the assembly consisting of a set of electron emitting filaments, an arc chamber volume, and a set of extraction grids. A second device, similar in concept, is used to separately accelerate electrons to the same energy. The much lighter mass of the electrons makes this device much smaller than its ion counterpart. The two beams then intersect, where the ions and electrons recombine into neutral atoms, allowing them to travel through the magnetic fields.
Once the neutral beam enters the tokamak, interactions with the main plasma ions occur. This has two effects. One is that the injected atoms re-ionize and become charged, thereby becoming trapped inside the reactor and adding to the fuel mass. The other is that the process of being ionized occurs through impacts with the rest of the fuel, and these impacts deposit energy in that fuel, heating it.
This form of heating has no inherent energy (temperature) limitation, in contrast to the ohmic method, but its rate is limited to the current in the injectors. Ion source extraction voltages are typically on the order of 50–100 kV, and high voltage, negative ion sources (-1 MV) are being developed for ITER. The ITER Neutral Beam Test Facility in Padova will be the first ITER facility to start operation.
While neutral beam injection is used primarily for plasma heating, it can also be used as a diagnostic tool and in feedback control by making a pulsed beam consisting of a string of brief 2–10 ms beam blips. Deuterium is a primary fuel for neutral beam heating systems and hydrogen and helium are sometimes used for selected experiments.
Radio-frequency heating
High-frequency electromagnetic waves are generated by oscillators (often by gyrotron
High-power 140 GHz gyrotron for plasma heating in the Wendelstein 7-X fusion experiment, Germany.
A gyrotron is a class of high-power linear-beam vacuum tubes that generates millimeter-wave electromagnetic waves by the cyclotron resonance of e ...
s or klystron
A klystron is a specialized linear-beam vacuum tube, invented in 1937 by American electrical engineers Russell and Sigurd Varian,Pond, Norman H. "The Tube Guys". Russ Cochran, 2008 p.31-40 which is used as an amplifier for high radio frequen ...
s) outside the torus. If the waves have the correct frequency (or wavelength) and polarization, their energy can be transferred to the charged particles in the plasma, which in turn collide with other plasma particles, thus increasing the temperature of the bulk plasma. Various techniques exist including electron cyclotron resonance
Electron cyclotron resonance (ECR) is a phenomenon observed in plasma physics, condensed matter physics, and accelerator physics. It happens when the frequency of incident radiation coincides with the natural frequency of rotation of electrons in m ...
heating (ECRH) and ion cyclotron resonance Ion cyclotron resonance is a phenomenon related to the movement of ions in a magnetic field. It is used for accelerating ions in a cyclotron, and for measuring the masses of an ionized analyte in mass spectrometry, particularly with Fourier transfo ...
heating. This energy is usually transferred by microwaves.
Particle inventory
Plasma discharges within the tokamak's vacuum chamber consist of energized ions and atoms and the energy from these particles eventually reaches the inner wall of the chamber through radiation, collisions, or lack of confinement. The inner wall of the chamber is water-cooled and the heat from the particles is removed via conduction through the wall to the water and convection of the heated water to an external cooling system.
Turbomolecular or diffusion pumps allow for particles to be evacuated from the bulk volume and cryogenic pumps, consisting of a liquid helium-cooled surface, serve to effectively control the density throughout the discharge by providing an energy sink for condensation to occur. When done correctly, the fusion reactions produce large amounts of high energy neutron
The neutron is a subatomic particle, symbol or , which has a neutral (not positive or negative) charge, and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons beh ...
s. Being electrically neutral and relatively tiny, the neutrons are not affected by the magnetic fields nor are they stopped much by the surrounding vacuum chamber.
The neutron flux is reduced significantly at a purpose-built neutron shield boundary that surrounds the tokamak in all directions. Shield materials vary but are generally materials made of atoms which are close to the size of neutrons because these work best to absorb the neutron and its energy. Good candidate materials include those with much hydrogen, such as water and plastics. Boron atoms are also good absorbers of neutrons. Thus, concrete and polyethylene doped with boron make inexpensive neutron shielding materials.
Once freed, the neutron has a relatively short half-life of about 10 minutes before it decays into a proton and electron with the emission of energy. When the time comes to actually try to make electricity from a tokamak-based reactor, some of the neutrons produced in the fusion process would be absorbed by a liquid metal blanket and their kinetic energy would be used in heat transfer processes to ultimately turn a generator.
Experimental tokamaks
Currently in operation
(in chronological order of start of operations)
*1960s: TM1-MH (since 1977 as Castor; since 2007 as Golem) in Prague
Prague ( ; cs, Praha ; german: Prag, ; la, Praga) is the capital and List of cities in the Czech Republic, largest city in the Czech Republic, and the historical capital of Bohemia. On the Vltava river, Prague is home to about 1.3 milli ...
, Czech Republic
The Czech Republic, or simply Czechia, is a landlocked country in Central Europe. Historically known as Bohemia, it is bordered by Austria to the south, Germany to the west, Poland to the northeast, and Slovakia to the southeast. The ...
. In operation in Kurchatov Institute
The Kurchatov Institute (russian: Национальный исследовательский центр «Курчатовский Институт», 'National Research Centre "Kurchatov Institute) is Russia's leading research and developmen ...
since the early 1960s but renamed to Castor in 1977 and moved to IPP CAS, Prague. In 2007 moved to FNSPE, Czech Technical University in Prague and renamed to Golem.
* 1975: T-10, in Kurchatov Institute
The Kurchatov Institute (russian: Национальный исследовательский центр «Курчатовский Институт», 'National Research Centre "Kurchatov Institute) is Russia's leading research and developmen ...
, Moscow
Moscow ( , US chiefly ; rus, links=no, Москва, r=Moskva, p=mɐskˈva, a=Москва.ogg) is the capital and largest city of Russia. The city stands on the Moskva River in Central Russia, with a population estimated at 13.0 millio ...
, Russia (formerly Soviet Union
The Soviet Union,. officially the Union of Soviet Socialist Republics. (USSR),. was a List of former transcontinental countries#Since 1700, transcontinental country that spanned much of Eurasia from 1922 to 1991. A flagship communist state, ...
); 2 MW
* 1983: Joint European Torus
The Joint European Torus, or JET, is an operational Magnetic confinement fusion, magnetically confined Plasma (physics), plasma physics experiment, located at Culham Centre for Fusion Energy in Oxfordshire, United Kingdom, UK. Based on a tokamak ...
(JET), in Culham
Culham is a village and civil parish in a bend of the River Thames, south of Abingdon in Oxfordshire. The parish includes Culham Science Centre and Europa School UK (formerly the European School, Culham, which was the only Accredited Europe ...
, United Kingdom
* 1986: DIII-D
DIII-D is a tokamak that has been operated since the late 1980s by General Atomics (GA) in San Diego, USA, for the U.S. Department of Energy. The DIII-D National Fusion Facility is part of the ongoing effort to achieve magnetically confined fusio ...
,[DIII-D]
(video) in San Diego
San Diego ( , ; ) is a city on the Pacific Ocean coast of Southern California located immediately adjacent to the Mexico–United States border. With a 2020 population of 1,386,932, it is the eighth most populous city in the United State ...
, United States; operated by General Atomics
General Atomics is an American energy and defense corporation headquartered in San Diego, California, specializing in research and technology development. This includes physics research in support of nuclear fission and nuclear fusion energy. Th ...
since the late 1980s
* 1987: STOR-M, University of Saskatchewan
A university () is an institution of higher (or tertiary) education and research which awards academic degrees in several academic disciplines. Universities typically offer both undergraduate and postgraduate programs. In the United States, ...
, Canada; its predecessor, STOR1-M built in 1983, was used for the first demonstration of alternating current in a tokamak.
* 1988: Tore Supra
WEST, Tungsten (chemical symbol "W") Environment in Steady-state Tokamak, (formerly Tore Supra) is a French tokamak that originally began operating as Tore Supra after the discontinuation of TFR (Tokamak of Fontenay-aux-Roses) and of Petula (in G ...
,[Tore Supra]
but renamed to WEST in 2016, at the CEA, Cadarache
Cadarache is the largest technological research and development centre for energy in Europe. It includes the CEA research activities and ITER.
CEA Cadarache is one of the 10 research centres of the French Commission of Atomic and Alternative En ...
, France
* 1989: Aditya
Surya (; sa, सूर्य, ) is the sun as well as the solar deity in Hinduism. He is traditionally one of the major five deities in the Smarta tradition, all of whom are considered as equivalent deities in the Panchayatana puja and a ...
, at Institute for Plasma Research (IPR) in Gujarat
Gujarat (, ) is a state along the western coast of India. Its coastline of about is the longest in the country, most of which lies on the Kathiawar peninsula. Gujarat is the fifth-largest Indian state by area, covering some ; and the ninth ...
, India
* 1989: COMPASS
A compass is a device that shows the cardinal directions used for navigation and geographic orientation. It commonly consists of a magnetized needle or other element, such as a compass card or compass rose, which can pivot to align itself wit ...
,[ in ]Prague
Prague ( ; cs, Praha ; german: Prag, ; la, Praga) is the capital and List of cities in the Czech Republic, largest city in the Czech Republic, and the historical capital of Bohemia. On the Vltava river, Prague is home to about 1.3 milli ...
, Czech Republic
The Czech Republic, or simply Czechia, is a landlocked country in Central Europe. Historically known as Bohemia, it is bordered by Austria to the south, Germany to the west, Poland to the northeast, and Slovakia to the southeast. The ...
; in operation since 2008, previously operated from 1989 to 1999 in Culham, United Kingdom
* 1990: FTU, in Frascati
Frascati () is a city and ''comune'' in the Metropolitan City of Rome Capital in the Lazio region of central Italy. It is located south-east of Rome, on the Alban Hills close to the ancient city of Tusculum. Frascati is closely associated wit ...
, Italy
* 1991: ISTTOK, at the Instituto de Plasmas e Fusão Nuclear, Lisbon, Portugal
* 1991: ASDEX Upgrade
ASDEX Upgrade (''Axially Symmetric Divertor Experiment'') is a divertor tokamak, that went into operation at the Max-Planck-Institut für Plasmaphysik, Garching in 1991. At present, it is Germany's second largest fusion experiment after stella ...
, in Garching, Germany
* 1992: H-1NF (H-1 National Plasma Fusion Research Facility)[Fusion Research: Australian Connections, Past and Future]
B. D. Blackwell, M.J. Hole, J. Howard and J. O'Connor based on the H-1 Heliac device built by Australia National University's plasma physics group and in operation since 1992
* 1992: Tokamak à configuration variable
The ''Tokamak à configuration variable'' (''TCV'', literally "variable configuration tokamak") is a Swiss research fusion reactor of the École Polytechnique Fédérale de Lausanne (EPFL). As the largest experimental facility of the Swiss Plas ...
(TCV), at the EPFL, Switzerland
* 1993: HBT-EP Tokamak, at the Columbia University
Columbia University (also known as Columbia, and officially as Columbia University in the City of New York) is a private research university in New York City. Established in 1754 as King's College on the grounds of Trinity Church in Manhatt ...
in New York City
New York, often called New York City or NYC, is the most populous city in the United States. With a 2020 population of 8,804,190 distributed over , New York City is also the most densely populated major city in the Un ...
, USA
* 1994: TCABR, at the University of São Paulo
The University of São Paulo ( pt, Universidade de São Paulo, USP) is a public university in the Brazilian state of São Paulo. It is the largest Brazilian public university and the country's most prestigious educational institution, the bes ...
, São Paulo
São Paulo (, ; Portuguese for ' Saint Paul') is the most populous city in Brazil, and is the capital of the state of São Paulo, the most populous and wealthiest Brazilian state, located in the country's Southeast Region. Listed by the Ga ...
, Brazil; this tokamak was transferred fro
Swiss Plasma Center
in Switzerland
* 1995: HT-7, at the Institute of Plasma Physics, Hefei, China
* 1996: Pegasus Toroidal Experiment at the University of Wisconsin–Madison
A university () is an institution of higher (or tertiary) education and research which awards academic degrees in several academic disciplines. Universities typically offer both undergraduate and postgraduate programs. In the United Stat ...
; in operation since the late 1990s
* 1999: NSTX in Princeton, New Jersey
Princeton is a municipality with a borough form of government in Mercer County, in the U.S. state of New Jersey. It was established on January 1, 2013, through the consolidation of the Borough of Princeton and Princeton Township, both of whi ...
* 1999
Globus-M
in Ioffe Institute
The Ioffe Physical-Technical Institute of the Russian Academy of Sciences (for short, Ioffe Institute, russian: Физико-технический институт им. А. Ф. Иоффе) is one of Russia's largest research centers specialized ...
, Saint Petersburg
Saint Petersburg ( rus, links=no, Санкт-Петербург, a=Ru-Sankt Peterburg Leningrad Petrograd Piter.ogg, r=Sankt-Peterburg, p=ˈsankt pʲɪtʲɪrˈburk), formerly known as Petrograd (1914–1924) and later Leningrad (1924–1991), i ...
, Russia
* 2000: ETE
Ete, Été or ETE may refer to:
People
* Erik Zabel (born 1970), German cyclist known by the nickname "Ete"
* Eteuati Ete, New Zealand actor
Other uses
* ETE (tokamak) at the National Institute for Space Research in Brazil
* Ete, Hungary
* ...
at the National Institute for Space Research
The National Institute for Space Research ( pt, Instituto Nacional de Pesquisas Espaciais, INPE) is a research unit of the Brazilian Ministry of Science, Technology and Innovations, the main goals of which are fostering scientific research an ...
, São Paulo
São Paulo (, ; Portuguese for ' Saint Paul') is the most populous city in Brazil, and is the capital of the state of São Paulo, the most populous and wealthiest Brazilian state, located in the country's Southeast Region. Listed by the Ga ...
, Brazil
* 2002: HL-2A
HL-2A (Huan-Liuqi-2A) is a medium-sized tokamak for fusion research in Chengdu, China. It was constructed by the China National Nuclear Corporation from early 1999 to 2002, based on the main components (magnet coils and plasma vessel) of the form ...
, in Chengdu
Chengdu (, ; simplified Chinese: 成都; pinyin: ''Chéngdū''; Sichuanese pronunciation: , Standard Chinese pronunciation: ), alternatively romanized as Chengtu, is a sub-provincial city which serves as the capital of the Chinese pro ...
, China
* 2006: EAST
East or Orient is one of the four cardinal directions or points of the compass. It is the opposite direction from west and is the direction from which the Sun rises on the Earth.
Etymology
As in other languages, the word is formed from the fac ...
(HT-7U), in Hefei, at The Hefei Institutes of Physical Science
The Hefei Institutes of Physical Science of the Chinese Academy of Sciences (CASHIPS, ) is a large-scaled integrated research center in Hefei, China. The inception of CASHIPS involved the integration of several existing institutes that were all ...
, China ( ITER member)
* 2007: QUEST, in Fukuoka
is the sixth-largest city in Japan, the second-largest port city after Yokohama, and the capital city of Fukuoka Prefecture, Japan. The city is built along the shores of Hakata Bay, and has been a center of international commerce since anc ...
, JAPAN https://www.triam.kyushu-u.ac.jp/QUEST_HP/suben/history.html
* 2008: KSTAR
The KSTAR (or Korea Superconducting Tokamak Advanced Research; ko, 초전도 핵융합연구장치, literally "superconducting nuclear fusion research device") is a magnetic fusion device at the Korea Institute of Fusion Energy in Daejeon, So ...
, in Daejon
Daejeon () is South Korea's fifth-largest metropolis, with a population of 1.5 million as of 2019. Located in the central-west region of South Korea alongside forested hills and the Geum River, the city is known both for its technology and ...
, South Korea ( ITER member)
* 2010: JT-60SA
JT-60 (short for Japan Torus-60) is a large research tokamak, the flagship of Japan's magnetic fusion program, previously run by the Japan Atomic Energy Research Institute (JAERI) and currently run by the Japan Atomic Energy Agency's (JAEA) Naka ...
, in Naka, Japan ( ITER member); upgraded from the JT-60.
* 2012: Medusa CR, in Cartago, at the Costa Rica Institute of Technology
The Costa Rica Institute of Technology (TEC) ( es, Tecnológico de Costa Rica) is a university in Costa Rica specializing in engineering and advanced science and research, modeled as an institute of technology. Its main campus is located in the Du ...
, Costa Rica
* 2012: SST-1, in Gandhinagar
Gandhinagar (, ) is the capital of the state of Gujarat in India. Gandhinagar is located approximately 23 km north of Ahmedabad, on the west central point of the Industrial corridor between Delhi, the political capital of India, and Mum ...
, at the Institute for Plasma Research, India ( ITER member)
* 2012: IR-T1, , Iran
Iran, officially the Islamic Republic of Iran, and also called Persia, is a country located in Western Asia. It is bordered by Iraq and Turkey to the west, by Azerbaijan and Armenia to the northwest, by the Caspian Sea and Turkmeni ...
* 2015: ST25-HTS at Tokamak Energy
Tokamak Energy is a fusion power research company based in the United Kingdom, established in 2009.
The company employs over 200 people and holds over 50 families of patent applications. It has built several versions of tokamaks, in the form of sp ...
Ltd in Culham
Culham is a village and civil parish in a bend of the River Thames, south of Abingdon in Oxfordshire. The parish includes Culham Science Centre and Europa School UK (formerly the European School, Culham, which was the only Accredited Europe ...
, United Kingdom
* 2017: KTM – this is an experimental thermonuclear facility for research and testing of materials under energy load conditions close to ITER and future energy fusion reactors, Kazakhstan
* 2018: ST40 at Tokamak Energy
Tokamak Energy is a fusion power research company based in the United Kingdom, established in 2009.
The company employs over 200 people and holds over 50 families of patent applications. It has built several versions of tokamaks, in the form of sp ...
Ltd in Oxford
Oxford () is a city in England. It is the county town and only city of Oxfordshire. In 2020, its population was estimated at 151,584. It is north-west of London, south-east of Birmingham and north-east of Bristol. The city is home to the ...
, United Kingdom
* 2020: HL-2M
HL-2M is a research tokamak at the Southwestern Institute of Physics in Chengdu, China. It was completed on November 26, 2019 and commissioned on December 4, 2020. HL-2M is now used for nuclear fusion research, in particular to study heat extractio ...
China National Nuclear Corporation
The China National Nuclear Corporation (CNNC; ) is a state-owned enterprise founded in 1955 in Beijing. CNNC's president and vice-president are appointed by the Premier of the People's Republic of China. CNNC oversees all aspects of China's civ ...
and the Southwestern Institute of Physics, China
* 2020: MAST Upgrade, in Culham
Culham is a village and civil parish in a bend of the River Thames, south of Abingdon in Oxfordshire. The parish includes Culham Science Centre and Europa School UK (formerly the European School, Culham, which was the only Accredited Europe ...
, United Kingdom
* 2021 SPARC
SPARC (Scalable Processor Architecture) is a reduced instruction set computer (RISC) instruction set architecture originally developed by Sun Microsystems. Its design was strongly influenced by the experimental Berkeley RISC system develope ...
a development of Commonwealth Fusion Systems
Commonwealth Fusion Systems (CFS) is an American company founded in 2018 aiming to build a compact fusion power plant based on the ARC tokamak power plant concept. The company is based in Cambridge, Massachusetts, and is a spin-off of the Massa ...
(CFS) in collaboration with the Massachusetts Institute of Technology
The Massachusetts Institute of Technology (MIT) is a private land-grant research university in Cambridge, Massachusetts. Established in 1861, MIT has played a key role in the development of modern technology and science, and is one of the ...
(MIT) Plasma Science and Fusion Center (PSFC) in Devens, Massachusetts
Devens is a regional enterprise zone and census-designated place in the towns of Ayer and Shirley (in Middlesex County) and Harvard (in Worcester County) in the U.S. state of Massachusetts. It is the successor to Fort Devens, a military post tha ...
.
Previously operated
* 1960s: T-3 and T-4, in Kurchatov Institute
The Kurchatov Institute (russian: Национальный исследовательский центр «Курчатовский Институт», 'National Research Centre "Kurchatov Institute) is Russia's leading research and developmen ...
, Moscow, Russia (formerly Soviet Union); T-4 in operation in 1968.
* 1963: LT-1, Australia National University's plasma physics group built a device to explore toroidal configurations, independently discovering the tokamak layout
* 1970: Stellarator C reopens as the Symmetric Tokamak in May at PPPL
* 1971–1980: Texas Turbulent Tokamak, University of Texas at Austin
The University of Texas at Austin (UT Austin, UT, or Texas) is a public research university in Austin, Texas. It was founded in 1883 and is the oldest institution in the University of Texas System. With 40,916 undergraduate students, 11,07 ...
, US
* 1972: The Adiabatic Toroidal Compressor begins operation at PPPL
* 1973–1976: Tokamak de Fontenay aux Roses
The Tokamak de Fontenay-aux-Roses (TFR) was the first French tokamak, built in a research centre of the French Atomic Energy Commission (CEA) in Fontenay-aux-Roses, a commune in the southwestern suburbs of Paris, France. Roughly the same size as t ...
(TFR), near Paris, France
* 1973–1979: Alcator A, MIT, US
* 1975: Princeton Large Torus
The Princeton Large Torus (or PLT), was an early tokamak built at the Princeton Plasma Physics Laboratory (PPPL). It was one of the first large scale tokamak machines, and among the most powerful in terms of current and magnetic fields. Originally ...
begins operation at PPPL
* 1978–1987: Alcator C, MIT, US
* 1978–2013: TEXTOR, in Jülich, Germany
* 1979–1998: MT-1 Tokamak, Budapest, Hungary (Built at the Kurchatov Institute, Russia, transported to Hungary in 1979, rebuilt as MT-1M in 1991)
* 1980–1990: Tokoloshe Tokamak, Atomic Energy Board, South Africa
* 1980–2004: TEXT/TEXT-U, University of Texas at Austin
The University of Texas at Austin (UT Austin, UT, or Texas) is a public research university in Austin, Texas. It was founded in 1883 and is the oldest institution in the University of Texas System. With 40,916 undergraduate students, 11,07 ...
, US
* 1982–1997: TFTR
The Tokamak Fusion Test Reactor (TFTR) was an experimental tokamak built at Princeton Plasma Physics Laboratory (PPPL) circa 1980 and entering service in 1982. TFTR was designed with the explicit goal of reaching scientific breakeven, the point wh ...
, Princeton University
Princeton University is a private research university in Princeton, New Jersey. Founded in 1746 in Elizabeth as the College of New Jersey, Princeton is the fourth-oldest institution of higher education in the United States and one of the ...
, US
* 1983–2000: Novillo Tokamak, at the Instituto Nacional de Investigaciones Nucleares, in Mexico City
Mexico City ( es, link=no, Ciudad de México, ; abbr.: CDMX; Nahuatl: ''Altepetl Mexico'') is the capital city, capital and primate city, largest city of Mexico, and the List of North American cities by population, most populous city in North Amer ...
, Mexico
* 1984–1992: HL-1 Tokamak, in Chengdu
Chengdu (, ; simplified Chinese: 成都; pinyin: ''Chéngdū''; Sichuanese pronunciation: , Standard Chinese pronunciation: ), alternatively romanized as Chengtu, is a sub-provincial city which serves as the capital of the Chinese pro ...
, China
* 1985–2010: JT-60
JT-60 (short for Japan Torus-60) is a large research tokamak, the flagship of Japan's magnetic fusion program, previously run by the Japan Atomic Energy Research Institute (JAERI) and currently run by the Japan Atomic Energy Agency's (JAEA) Naka ...
, in Naka, Ibaraki Prefecture
is a prefecture of Japan located in the Kantō region of Honshu. Ibaraki Prefecture has a population of 2,871,199 (1 June 2019) and has a geographic area of . Ibaraki Prefecture borders Fukushima Prefecture to the north, Tochigi Prefecture ...
, Japan; (Being upgraded 2015–2018 to Super, Advanced model)
* 1987–1999: Tokamak de Varennes; Varennes
Varennes-en-Argonne (, literally ''Varennes in Argonne'') or simply Varennes (German: Wöringen) is a commune in the Meuse department in the Grand Est region in Northeastern France. In 2019, it had a population of 639.
Geography
Varennes-en-Ar ...
, Canada; operated by Hydro-Québec and used by researchers from '' Institut de recherche en électricité du Québec'' (IREQ) and the ''Institut national de la recherche scientifique'' (INRS)
* 1988–2005: T-15, in Kurchatov Institute
The Kurchatov Institute (russian: Национальный исследовательский центр «Курчатовский Институт», 'National Research Centre "Kurchatov Institute) is Russia's leading research and developmen ...
, Moscow, Russia (formerly Soviet Union); 10 MW
* 1991–1998: START, in Culham
Culham is a village and civil parish in a bend of the River Thames, south of Abingdon in Oxfordshire. The parish includes Culham Science Centre and Europa School UK (formerly the European School, Culham, which was the only Accredited Europe ...
, United Kingdom
* 1990s–2001: COMPASS
A compass is a device that shows the cardinal directions used for navigation and geographic orientation. It commonly consists of a magnetized needle or other element, such as a compass card or compass rose, which can pivot to align itself wit ...
, in Culham, United Kingdom
* 1994–2001: HL-1M Tokamak, in Chengdu
Chengdu (, ; simplified Chinese: 成都; pinyin: ''Chéngdū''; Sichuanese pronunciation: , Standard Chinese pronunciation: ), alternatively romanized as Chengtu, is a sub-provincial city which serves as the capital of the Chinese pro ...
, China
* 1999–2006: UCLA Electric Tokamak, in Los Angeles
Los Angeles ( ; es, Los Ángeles, link=no , ), often referred to by its initials L.A., is the List of municipalities in California, largest city in the U.S. state, state of California and the List of United States cities by population, sec ...
, US
* 1999–2014: MAST, in Culham
Culham is a village and civil parish in a bend of the River Thames, south of Abingdon in Oxfordshire. The parish includes Culham Science Centre and Europa School UK (formerly the European School, Culham, which was the only Accredited Europe ...
, United Kingdom
* 1992–2016: Alcator C-Mod
Alcator C-Mod was a tokamak (a type of magnetically confined fusion device) that operated between 1991 and 2016 at the Massachusetts Institute of Technology (MIT) Plasma Science and Fusion Center (PSFC). Notable for its high toroidal magnetic ...
, MIT
The Massachusetts Institute of Technology (MIT) is a private land-grant research university in Cambridge, Massachusetts. Established in 1861, MIT has played a key role in the development of modern technology and science, and is one of the m ...
, Cambridge
Cambridge ( ) is a College town, university city and the county town in Cambridgeshire, England. It is located on the River Cam approximately north of London. As of the 2021 United Kingdom census, the population of Cambridge was 145,700. Cam ...
, US
Planned
* ITER, international project in Cadarache
Cadarache is the largest technological research and development centre for energy in Europe. It includes the CEA research activities and ITER.
CEA Cadarache is one of the 10 research centres of the French Commission of Atomic and Alternative En ...
, France; 500 MW; construction began in 2010, first plasma expected in 2025. Expected fully operational by 2035.
* DEMO
Demo, usually short for demonstration, may refer to:
Music and film
*Demo (music), a song typically recorded for reference rather than release
* ''Demo'' (Behind Crimson Eyes), a 2004 recording by the band Behind Crimson Eyes
* ''Demo'' (Deafhea ...
; 2000 MW, continuous operation, connected to power grid. Planned successor to ITER; construction to begin in 2024 according to preliminary timetable.
* CFETR
The China Fusion Engineering Test Reactor (中国聚变工程实验堆, CFETR) is a proposed tokamak fusion reactor, which uses a magnetic field in order to confine plasma and generate energy.
Presently, tokamak devices are leading candidates fo ...
, also known as "China Fusion Engineering Test Reactor"; 200 MW; Next generation Chinese fusion reactor, is a new tokamak device.
* K-DEMO in South Korea; 2200–3000 MW, a net electric generation on the order of 500 MW is planned; construction is targeted by 2037.
See also
* Magnetic mirror
A magnetic mirror, known as a magnetic trap (магнитный захват) in Russia and briefly as a pyrotron in the US, is a type of magnetic confinement device used in fusion power to trap high temperature plasma using magnetic fields. T ...
s
* Edge-localized mode An edge-localized mode (ELM) is a disruptive instability occurring in the edge region of a tokamak plasma due to the quasi-periodic relaxation of a transport barrier previously formed during a transition from low to high-confinement mode. This phen ...
, a tokamak plasma instability
* Stellarator
A stellarator is a plasma device that relies primarily on external magnets to confine a plasma. Scientists researching magnetic confinement fusion aim to use stellarator devices as a vessel for nuclear fusion reactions. The name refers to the ...
, an alternative design
* Reversed-field pinch, an alternative design
* Divertor
In nuclear fusion power research, a divertor is a device within a tokamak or a stellarator that allows the online removal of waste material from the plasma while the reactor is still operating. This allows control over the buildup of fusion pro ...
, used in long pulse tokamaks
* Ball-pen probe
A ball-pen probe is a modified Langmuir probe used to measure the plasma potential in magnetized plasmas. The ball-pen probe balances the electron and ion saturation currents, so that its floating potential is equal to the plasma potential. Be ...
* Dimensionless parameters in tokamaks in the article on Plasma scaling
The parameters of plasmas, including their spatial and temporal extent, vary by many orders of magnitude. Nevertheless, there are significant similarities in the behaviors of apparently disparate plasmas. Understanding the scaling of plasma beh ...
* Lawson criterion
The Lawson criterion is a figure of merit used in nuclear fusion research. It compares the rate of energy being generated by fusion reactions within the fusion fuel to the rate of energy losses to the environment. When the rate of production is ...
, and triple product, needed for break-even and ignition
* Fusion power#Records, inc beta, Q
* ARC fusion reactor
The ARC fusion reactor (affordable, robust, compact) is a design for a compact fusion reactor developed by the Massachusetts Institute of Technology (MIT) Plasma Science and Fusion Center (PSFC). ARC aims to achieve an engineering breakeven of th ...
, an MIT tokamak design
* List of plasma (physics) articles
Notes
References
Citations
Bibliography
*
*
*
*
*
*
*
*
*
*
*
*
*
*
External links
CCFE
– site from the UK fusion research centre CCFE.
Int'l Tokamak research
– various that relate to ITER
– site on tokamaks from the French CEA.
Fusion Programs
at General Atomics
General Atomics is an American energy and defense corporation headquartered in San Diego, California, specializing in research and technology development. This includes physics research in support of nuclear fission and nuclear fusion energy. Th ...
, including the DIII-D National Fusion Facility, an experimental tokamak.
General Atomics DIII-D Program
Fusion and Plasma Physics Seminar
at MIT OCW
Unofficial ITER fan club
– fans of the biggest tokamak planned to be built in near future.
All-the-Worlds-Tokamaks
Extensive list of current and historic tokamaks from around the world.
SSTC-1
Overview video of a small scale tokamak concept.
* Section View Video of a small scale tokamak concept.
* Fly Through Video of a small scale tokamak concept.
Information on conditions necessary for nuclear reaction in a tokamak reactor
*
Observer Newspaper Article on Tokomak
Nuclear fusion and the promise of a brighter tomorrow
{{Authority control
Science and technology in the Soviet Union
Soviet inventions