Properties Of Metals, Metalloids And Nonmetals

can be broadly divided into metals, metalloids, and nonmetals according to their shared physical and chemical properties. All elemental metals have a shiny appearance (at least when freshly polished); are good conductors of heat and electricity; form alloys with other metallic elements; and have at least one basic oxide. Metalloids are metallic-looking, often brittle solids that are either semiconductors or exist in semiconducting forms, and have amphoteric or weakly acidic oxides. Typical elemental nonmetals have a dull, coloured or colourless appearance; are often brittle when solid; are poor conductors of heat and electricity; and have acidic oxides. Most or some elements in each category share a range of other properties; a few elements have properties that are either anomalous given their category, or otherwise extraordinary.

Properties

Metals

Elemental metals appear lustrous (beneath any patina); form compounds (alloys) when combined with other elements; tend to lose or share electrons when they react with other substances; and each forms at least one predominantly basic oxide.

Most metals are silvery looking, high density, relatively soft and easily deformed solids with good electrical and thermal conductivity, closely packed structures, low ionisation energies and electronegativities, and are found naturally in combined states.

Some metals appear coloured ( Cu, Cs, Au), have low densities (e.g. Be, Al) or very high melting points (e.g. W, Nb), are liquids at or near room temperature (e.g. Hg, Ga), are brittle (e.g. Os, Bi), not easily machined (e.g. Ti, Re), or are noble (hard to oxidise, e.g. Au, Pt), or have nonmetallic structures ( Mn and Ga are structurally analogous to, respectively, white P and I).

Metals comprise the large majority of the elements, and can be subdivided into several different categories. From left to right in the periodic table, these categories include the highly reactive alkali metals; the less-reactive alkaline earth metals, lanthanides, and radioactive actinides; the archetypal transition metals; and the physically and chemically weak post-transition metals. Specialized subcategories such as the refractory metals and the noble metals also exist.

Metalloids

Metalloids are metallic-looking often brittle solids; tend to share electrons when they react with other substances; have weakly acidic or amphoteric oxides; and are usually found naturally in combined states.

Most are semiconductors, and moderate thermal conductors, and have structures that are more open than those of most metals.

Some metalloids ( As, Sb) conduct electricity like metals.

The metalloids, as the smallest major category of elements, are not subdivided further.

Nonmetals

Nonmetallic elements often have open structures; tend to gain or share electrons when they react with other substances; and do not form distinctly basic oxides.

Most are gases at room temperature; have relatively low densities; are poor electrical and thermal conductors; have relatively high ionisation energies and electronegativities; form acidic oxides; and are found naturally in uncombined states in large amounts.

Some nonmetals (black P, S, and Se) are brittle solids at room temperature (although each of these also have malleable, pliable or ductile allotropes).

From left to right in the periodic table, the nonmetals can be divided into the reactive nonmetals and the noble gases. The reactive nonmetals near the metalloids show some incipient metallic character, such as the metallic appearance of graphite, black phosphorus, selenium and iodine. The noble gases are almost completely inert.

Comparison of properties

Overview

properties of elemental metals and nonmetals are quite distinct, as shown in the table below. Metalloids, straddling the metal-nonmetal border, are mostly distinct from either, but in a few properties resemble one or the other, as shown in the shading of the metalloid column below and summarized in the small table at the top of this section.

Authors differ in where they divide metals from nonmetals and in whether they recognize an intermediate metalloid category. Some authors count metalloids as nonmetals with weakly nonmetallic properties. Others count some of the metalloids as post-transition metals.

Details

Anomalous properties

Within each category, elements can be found with one or two properties very different from the expected norm, or that are otherwise notable.

Metals

Sodium, potassium, rubidium, caesium, barium, platinum, gold
:*The common notions that "alkali metal ions (group 1A) always have a +1 charge" and that "transition elements do not form anions" are textbook errors. The synthesis of a crystalline salt of the sodium anion Na⁻ was reported in 1974. Since then further compounds (" alkalides") containing anions of all other alkali metals except Li and Fr, as well as that of Ba, have been prepared. In 1943, Sommer reported the preparation of the yellow transparent compound CsAu. This was subsequently shown to consist of caesium cations (Cs⁺) and auride anions (Au⁻) although it was some years before this conclusion was accepted. Several other aurides (KAu, RbAu) have since been synthesized, as well as the red transparent compound Cs₂Pt which was found to contain Cs⁺ and Pt²⁻ ions.

Manganese
:*Well-behaved metals have crystal structures featuring unit cells with up to four atoms. Manganese has a complex crystal structure with a 58-atom unit cell, effectively four different atomic radii, and four different coordination numbers (10, 11, 12 and 16). It has been described as resembling "a quaternary intermetallic compound with four Mn atom types bonding as if they were different elements." Russell & Lee 2005, p. 246 The half-filled ''3d'' shell of manganese appears to be the cause of the complexity. This confers a large magnetic moment on each atom. Below 727 °C, a unit cell of 58 spatially diverse atoms represents the energetically lowest way of achieving a zero net magnetic moment. The crystal structure of manganese makes it a hard and brittle metal, with low electrical and thermal conductivity. At higher temperatures "greater lattice vibrations nullify magnetic effects" and manganese adopts less-complex structures.

Iron, cobalt, nickel, gadolinium, terbium, dysprosium, holmium, erbium, thulium
:*The only elements strongly attracted to magnets are iron, cobalt, and nickel at room temperature, gadolinium just below, and terbium, dysprosium, holmium, erbium, and thulium at ultra-cold temperatures (below −54 °C, −185 °C, −254 °C, −254 °C, and −241 °C respectively).

Iridium
:*The only element encountered with an oxidation state of +9 is iridium, in the rO₄sup>+ cation. Other than this, the highest known oxidation state is +8, in Ru, Xe, Os, Ir, and Hs.

Gold
:*The malleability of gold is extraordinary: a fist-sized lump can be hammered and separated into one million paperback-sized sheets, each 10 nm thick, 1600 times thinner than regular kitchen aluminium foil (0.016 mm thick).

Mercury
#Bricks and bowling balls will float on the surface of mercury thanks to it having a density 13.5 times that of water. Equally, a solid mercury bowling ball would weigh around 50 pounds and, if it could be kept cold enough, would float on the surface of liquid gold.
#The only metal having an ionisation energy higher than some nonmetals (sulfur and selenium) is mercury.
#Mercury and its compounds have a reputation for toxicity but on a scale of 1 to 10, dimethylmercury ((CH₃)₂Hg) (abbr. DMM), a volatile colourless liquid, has been described as a 15. It is so dangerous that scientists have been encouraged to use less-toxic mercury compounds wherever possible. In 1997, Karen Wetterhahn, a professor of chemistry specialising in toxic metal exposure, died of mercury poisoning ten months after a few drops of DMM landed on her "protective" latex gloves. Although Wetterhahn had been following the then-published procedures for handling this compound, it passed through her gloves and skin within seconds. It is now known that DMM is exceptionally permeable to (ordinary) gloves, skin, and tissues. And its toxicity is such that less than one-tenth of a ml applied to the skin will be seriously toxic.

Lead
:*The expression, to " go down like a lead balloon" is anchored in the common view of lead as a dense, heavy metal—being nearly as dense as mercury. However, it is possible to construct a balloon made of lead foil, filled with a helium and air mixture, which will float and be buoyant enough to carry a small load.

Bismuth
:*Bismuth has the longest half-life of any naturally occurring element; its only primordial isotope, bismuth-209, was found in 2003 to be slightly radioactive, decaying via alpha decay with a half-life more than a billion times the estimated age of the universe. Prior to this discovery, bismuth-209 was thought to be the heaviest naturally occurring stable isotope; this distinction now belongs to lead-208.

Uranium
:*The only element with a naturally occurring isotope capable of undergoing nuclear fission is uranium. The capacity of uranium-235 to undergo fission was first suggested (and ignored) in 1934, and subsequently discovered in 1938.

Plutonium
:*It is normally true that metals reduce their electrical conductivity when heated. Plutonium increases its electrical conductivity when heated in the temperature range of around –175 to +125 °C. There is evidence that this behavior, and similar with some of the other transuranic elements is due to more complex relativistic and spin interactions that are not captured by simple model of electrical conductivity.

Metalloids

Boron
:*Boron is the only element with a partially disordered structure in its most thermodynamically stable crystalline form.

Boron, antimony
:*These elements are record holders within the field of superacid chemistry. For seven decades, fluorosulfonic acid HSO₃F and trifluoromethanesulfonic acid CF₃SO₃H were the strongest known acids that could be isolated as single compounds. Both are about a thousand times more acidic than pure sulfuric acid. In 2004, a boron compound broke this record by a thousand fold with the synthesis of carborane acid H(CHB₁₁Cl₁₁). Another metalloid, antimony, features in the strongest known acid, a mixture 10 billion times stronger than carborane acid. This is fluoroantimonic acid H₂F bF₆ a mixture of antimony pentafluoride SbF₅ and hydrofluoric acid HF.

Silicon
#The thermal conductivity of silicon is better than that of most metals.
#A sponge-like porous form of silicon (p-Si) is typically prepared by the electrochemical etching of silicon wafers in a hydrofluoric acid solution. DuPlessis 2007, p. 133 Flakes of p-Si sometimes appear red; it has a band gap of 1.97–2.1 eV. The many tiny pores in porous silicon give it an enormous internal surface area, up to 1,000 m²/cm³. Kovalev et al. 2001, p. 068301-1 When exposed to an oxidant, especially a liquid oxidant, the high surface-area to volume ratio of p-Si creates a very efficient burn, accompanied by nano-explosions, and sometimes by ball-lightning-like plasmoids with, for example, a diameter of 0.1–0.8 m, a velocity of up to 0.5 m/s and a lifetime of up to 1s. The first ever spectrographic analysis of a ball lightning event (in 2012) revealed the presence of silicon, iron and calcium, these elements also being present in the soil.

Arsenic
:*Metals are said to be fusible, resulting in some confusion in old chemistry as to whether arsenic was a true metal, or a nonmetal, or something in-between. It sublimes rather than melts at standard atmospheric pressure, like the nonmetals carbon and red phosphorus.

Antimony
:*A high-energy explosive form of antimony was first produced in 1858. It is prepared by the electrolysis of any of the heavier antimony trihalides (SbCl₃, SbBr₃, SbI₃) in a hydrochloric acid solution at low temperature. It comprises amorphous antimony with some occluded antimony trihalide (7–20% in the case of the trichloride). When scratched, struck, powdered or heated quickly to 200 °C, it "flares up, emits sparks and is converted explosively into the lower-energy, crystalline grey antimony".

Nonmetals

Hydrogen
#Water (H₂O), a well-known oxide of hydrogen, is a spectacular anomaly. Extrapolating from the heavier hydrogen chalcogenides, namely hydrogen sulfide H₂S, hydrogen selenide H₂Se, and hydrogen telluride H₂Te, water should be "a foul-smelling, poisonous, inflammable gas... condensing to a nasty liquid taround –100 °C". Instead, due to hydrogen bonding, water is "stable, potable, odorless, benign, and... indispensable to life".
#Less well-known of the oxides of hydrogen is the trioxide, H₂O₃. Berthelot proposed the existence of this oxide in 1880 but his suggestion was soon forgotten as there was no way of testing it using the technology of the time. Cerkovnik & Plesničar 2013, p. 7930 Hydrogen trioxide was prepared in 1994 by replacing the oxygen used in the industrial process for making hydrogen peroxide, with ozone. The yield is about 40 per cent, at –78 °C; above around –40 °C it decomposes into water and oxygen. Derivatives of hydrogen trioxide, such as ("bis(trifluoromethyl) trioxide") are known; these are metastable at room temperature. Mendeleev went a step further, in 1895, and proposed the existence of hydrogen tetroxide as a transient intermediate in the decomposition of hydrogen peroxide; this was prepared and characterised in 1974, using a matrix isolation technique. Alkali metal ozonide salts of the unknown hydrogen ozonide (HO₃) are also known; these have the formula MO₃. Wiberg 2001, p. 497

Helium
#At temperatures below 0.3 and 0.8 K respectively, helium-3 and helium-4 each have a negative enthalpy of fusion. This means that, at the appropriate constant pressures, these substances freeze with the ''addition'' of heat.
#Until 1999 helium was thought to be too small to form a cage clathrate—a compound in which a guest atom or molecule is encapsulated in a cage formed by a host molecule—at atmospheric pressure. In that year the synthesis of microgram quantities of He@C₂₀H₂₀ represented the first such helium clathrate and (what was described as) the world's smallest helium balloon.

Carbon
#Graphite is the most electrically conductive nonmetal, better than some metals.
#Diamond is the best natural conductor of heat; it even feels cold to the touch. Its thermal conductivity (2,200 W/m•K) is five times greater than the most conductive metal ( Ag at 429); 300 times higher than the least conductive metal ( Pu at 6.74); and nearly 4,000 times that of water (0.58) and 100,000 times that of air (0.0224). This high thermal conductivity is used by jewelers and gemologists to separate diamonds from imitations.
#Graphene aerogel, produced in 2012 by freeze-drying a solution of carbon nanotubes and graphite oxide sheets and chemically removing oxygen, is seven times lighter than air, and ten per cent lighter than helium. It is the lightest solid known (0.16 mg/cm³), conductive and elastic.

Phosphorus
:*The least stable and most reactive form of phosphorus is the white allotrope. It is a hazardous, highly flammable and toxic substance, spontaneously igniting in air and producing phosphoric acid residue. It is therefore normally stored under water. White phosphorus is also the most common, industrially important, and easily reproducible allotrope, and for these reasons is regarded as the standard state of phosphorus. The most stable form is the black allotrope, which is a metallic looking, brittle and relatively non-reactive semiconductor (unlike the white allotrope, which has a white or yellowish appearance, is pliable, highly reactive and a semiconductor). When assessing periodicity in the physical properties of the elements it needs to be borne in mind that the quoted properties of phosphorus tend to be those of its least stable form rather than, as is the case with all other elements, the most stable form.

Iodine
:*The mildest of the halogens, iodine is the active ingredient in tincture of iodine, a disinfectant. This can be found in household medicine cabinets or emergency survival kits. Tincture of iodine will rapidly dissolve gold, Nakao 1992 a task ordinarily requiring the use of aqua regia (a highly corrosive mixture of nitric and hydrochloric acids).

Notes

Citations

References

*Addison WE 1964, ''The allotropy of the elements'', Oldbourne Press, London
*Adler D 1969, 'Half-way elements: The technology of metalloids', book review, ''Technology Review'', vol. 72, no. 1, Oct/Nov, pp. 18–19
*Benedict M, Alvarez LW, Bliss LA, English SG, Kinzell AB, Morrison P, English FH, Starr C & Williams WJ 1946, 'Technological control of atomic energy activities', "Bulletin of the Atomic Scientists", vol. 2, no. 11, pp. 18–29
*Anthony S 2013
'Graphene aerogel is seven times lighter than air, can balance on a blade of grass'
''ExtremeTech'', April 10, accessed 8 February 2015
*Antia, Meher. 1998
'Focus: Levitating Liquid Boron'
''American Physical Society'', viewed 14 December 2014
*
*Askeland DR, Fulay PP & Wright JW 2011, ''The science and engineering of materials'', 6th ed., Cengage Learning, Stamford, CT,
*Atkins P, Overton T, Rourke J, Weller M & Armstrong F 2006, ''Shriver & Atkins' inorganic chemistry'', 4th ed., Oxford University Press, Oxford,
*Austen K 2012, 'A factory for elements that barely exist', ''NewScientist'', 21 Apr, p. 12, ISSN 1032-1233
*Bagnall KW 1966, ''The chemistry of selenium, tellurium and polonium'', Elsevier, Amsterdam
*Bailar JC, Moeller T, Kleinberg J, Guss CO, Castellion ME & Metz C 1989, ''Chemistry'', 3rd ed., Harcourt Brace Jovanovich, San Diego,
*Bassett LG, Bunce SC, Carter AE, Clark HM & Hollinger HB 1966, ''Principles of chemistry'', Prentice-Hall, Englewood Cliffs, NJ
*Batsanov SS & Batsanov AS 2012, ''Introduction to structural chemistry'', Springer Science+Business Media, Dordrecht,
*Berei K & Vasáros L 1985, 'Astatine compounds', in Kugler & Keller
*
*Beveridge TJ, Hughes MN, Lee H, Leung KT, Poole RK, Savvaidis I, Silver S & Trevors JT 1997, 'Metal–microbe interactions: Contemporary approaches', in RK Poole (ed.), ''Advances in microbial physiology'', vol. 38, Academic Press, San Diego, pp. 177–243,
*Bogoroditskii NP & Pasynkov VV 1967, ''Radio and electronic materials'', Iliffe Books, London
*Booth VH & Bloom ML 1972, ''Physical science: a study of matter and energy'', Macmillan, New York
*Born M & Wolf E 1999, '' Principles of optics: Electromagnetic theory of propagation, interference and diffraction of light'', 7th ed., Cambridge University Press, Cambridge,
*
*Brasted RC 1974, 'Oxygen group elements and their compounds', in ''The new Encyclopædia Britannica'', vol. 13, Encyclopædia Britannica, Chicago, pp. 809–824
*Brescia F, Arents J, Meislich H & Turk A 1975, ''Fundamentals of chemistry'', 3rd ed., Academic Press, New York, p. 453,
*Brinkley SR 1945, ''Introductory general chemistry'', 3rd ed., Macmillan, New York
*Brown TL, LeMay HE, Bursten BE, Murphy CJ & Woodward P 2009, ''Chemistry: The Central Science'', 11th ed., Pearson Education, New Jersey,
*Burakowski T & Wierzchoń T 1999, ''Surface engineering of metals: Principles, equipment, technologies'', CRC Press, Boca Raton, Fla,
*Bychkov VL 2012, 'Unsolved Mystery of Ball Lightning', in ''Atomic Processes in Basic and Applied Physics'', V Shevelko & H Tawara (eds), Springer Science & Business Media, Heidelberg, pp. 3–24,
*Carapella SC 1968a, 'Arsenic' in CA Hampel (ed.), ''The encyclopedia of the chemical elements'', Reinhold, New York, pp. 29–32
*
*Chang R 1994, ''Chemistry'', 5th (international) ed., McGraw-Hill, New York
*Chang R 2002, ''Chemistry'', 7th ed., McGraw Hill, Boston
*Chedd G 1969, ''Half-way elements: The technology of metalloids'', Doubleday, New York
*
*Chizhikov DM & Shchastlivyi VP 1968, ''Selenium and selenides'', translated from the Russian by EM Elkin, Collet's, London
*Choppin GR & Johnsen RH 1972, ''Introductory chemistry'', Addison-Wesley, Reading, Massachusetts
*Christensen RM 2012, 'Are the elements ductile or brittle: A nanoscale evaluation', in
Failure theory for materials science and engineering
', chapter 12, p. 14
*
*
*Cordes EH & Scaheffer R 1973, ''Chemistry'', Harper & Row, New York
*Cotton SA 1994, 'Scandium, yttrium & the lanthanides: Inorganic & coordination chemistry', in RB King (ed.), ''Encyclopedia of inorganic chemistry'', 2nd ed., vol. 7, John Wiley & Sons, New York, pp. 3595–3616,
*Cox PA 2004, ''Inorganic chemistry'', 2nd ed., Instant notes series, Bios Scientific, London,
*
*Cverna F 2002, ''ASM ready reference: Thermal properties of metals'', ASM International, Materials Park, Ohio,
*Dalhouse University 2015

media release, 28 January, accessed 9 May 2015
*Deming HG 1952, ''General chemistry: An elementary survey'', 6th ed., John Wiley & Sons, New York
*
*Donohoe J 1982, ''The Structures of the Elements'', Robert E. Krieger, Malabar, Florida,
*
*
*Dunstan S 1968, ''Principles of chemistry'', D. Van Nostrand Company, London
*Du Plessis M 2007, 'A Gravimetric Technique to Determine the Crystallite Size Distribution in High Porosity Nanoporous Silicon, in JA Martino, MA Pavanello & C Claeys (eds), ''Microelectronics Technology and Devices–SBMICRO 2007'', vol. 9, no. 1, The Electrochemical Society, New Jersey, pp. 133–142,
*Eby GS, Waugh CL, Welch HE & Buckingham BH 1943, ''The physical sciences'', Ginn and Company, Boston
*
*Edwards PP 1999, 'Chemically engineering the metallic, insulating and superconducting state of matter' in KR Seddon & M Zaworotko (eds), ''Crystal engineering: The design and application of functional solids'', Kluwer Academic, Dordrecht, pp. 409–431
*Edwards PP 2000, 'What, why and when is a metal?', in N Hall (ed.), ''The new chemistry'', Cambridge University, Cambridge, pp. 85–114
*
*
*Emsley 1994, 'Science: Surprise legacy of Germany's Flying Bombs', ''New Scientist'', no. 1910, January 29
*Emsley J 2001,
Nature's building blocks: An A–Z guide to the elements
',
*Endicott K 1998
'The Trembling Edge of Science'
''Dartmouth Alumni Magazine'', April, accessed 8 May 2015
*
*
*Georgievskii VI 1982, 'Biochemical regions. Mineral composition of feeds', in VI Georgievskii, BN Annenkov & VT Samokhin (eds), ''Mineral nutrition of animals: Studies in the agricultural and food sciences'', Butterworths, London, pp. 57–68,
*Gillespie RJ & Robinson EA 1959, 'The sulphuric acid solvent system', in HJ Emeléus & AG Sharpe (eds), ''Advances in inorganic chemistry and radiochemistry'', vol. 1, Academic Press, New York, pp. 386–424
*Glazov VM, Chizhevskaya SN & Glagoleva NN 1969, ''Liquid semiconductors'', Plenum, New York
*Glinka N 1965, ''General chemistry'', trans. D Sobolev, Gordon & Breach, New York
*Gösele U & Lehmann V 1994, 'Porous Silicon Quantum Sponge Structures: Formation Mechanism, Preparation Methods and Some Properties', in Feng ZC & Tsu R (eds), ''Porous Silicon'', World Scientific, Singapore, pp. 17–40,
*
*Greenwood NN & Earnshaw A 2002, ''Chemistry of the elements'', 2nd ed., Butterworth-Heinemann,
*
*Gupta A, Awana VPS, Samanta SB, Kishan H & Narlikar AV 2005, 'Disordered superconductors' in AV Narlikar (ed.)
''Frontiers in superconducting materials''
Springer-Verlag, Berlin, p. 502,
*Habashi F 2003, ''Metals from ores: an introduction to extractive metallurgy'', Métallurgie Extractive Québec, Sainte Foy, Québec,
*Manson SS & Halford GR 2006, ''Fatigue and Durability of Structural Materials'', ASM International, Materials Park, OH,
*Hampel CA & Hawley GG 1976, ''Glossary of chemical terms'', Van Nostrand Reinhold, New York
*Hem JD 1985, ''Study and interpretation of the chemical characteristics of natural water'', paper 2254, 3rd ed., US Geological Society, Alexandria, Virginia
*
*
*Heslop RB & Robinson PL 1963, ''Inorganic chemistry: A guide to advanced study'', Elsevier, Amsterdam
*Hill G & Holman J 2000
''Chemistry in context''
5th ed., Nelson Thornes, Cheltenham,
*Hiller LA & Herber RH 1960, ''Principles of chemistry'', McGraw-Hill, New York
*Holtzclaw HF, Robinson WR & Odom JD 1991, ''General chemistry'', 9th ed., DC Heath, Lexington,
*
*''Chemistry Views'' 2012, 'Horst Prinzbach (1931 – 2012)', Wiley-VCH, accessed 28 February 2015
*Huheey JE, Keiter EA & Keiter RL 1993, ''Principles of Structure & Reactivity'', 4th ed., HarperCollins College Publishers,
*Hultgren HH 1966, 'Metalloids', in GL Clark & GG Hawley (eds), ''The encyclopedia of inorganic chemistry'', 2nd ed., Reinhold Publishing, New York
*Hunt A 2000, ''The complete A-Z chemistry handbook'', 2nd ed., Hodder & Stoughton, London
*Iler RK 1979, ''The chemistry of silica: solubility, polymerization, colloid and surface properties, and biochemistry'', John Wiley, New York,
*
*
*Jauncey GEM 1948, ''Modern physics: A second course in college physics'', D. Von Nostrand, New York
*Jenkins GM & Kawamura K 1976, ''Polymeric carbons—carbon fibre, glass and char'', Cambridge University Press, Cambridge
*Keenan CW, Kleinfelter DC & Wood JH 1980, ''General college chemistry'', 6th ed., Harper & Row, San Francisco,
*Keogh DW 2005, 'Actinides: Inorganic & coordination chemistry', in RB King (ed.), ''Encyclopedia of inorganic chemistry'', 2nd ed., vol. 1, John Wiley & Sons, New York, pp. 2–32,
*Klein CA & Cardinale GF 1992, 'Young's modulus and Poisson's ratio of CVD diamond', in A Feldman & S Holly, ''SPIE Proceedings'', vol. 1759, Diamond Optics V, pp. 178‒192,
*Kneen WR, Rogers MJW & Simpson P 1972, ''Chemistry: Facts, patterns, and principles'', Addison-Wesley, London
*
*Kozyrev PT 1959, 'Deoxidized selenium and the dependence of its electrical conductivity on pressure. II', ''Physics of the solid state'', translation of the journal Solid State Physics (Fizika tverdogo tela) of the Academy of Sciences of the USSR, vol. 1, pp. 102–110
*Kugler HK & Keller C (eds) 1985, ''Gmelin Handbook of Inorganic and Organometallic chemistry'', 8th ed., 'At, Astatine', system no. 8a, Springer-Verlag, Berlin,
*Lagrenaudie J 1953, 'Semiconductive properties of boron' (in French), ''Journal de chimie physique'', vol. 50, nos. 11–12, Nov-Dec, pp. 629–633
*
*
*Leith MM 1966, Velocity of sound in solid iodine, MSc thesis, University of British Columbia. Leith comments that, '... as iodine is anisotropic in many of its physical properties most attention was paid to two amorphous samples which were thought to give representative average values of the properties of iodine' (p. iii).
*Lide DR & Frederikse HPR (eds) 1998, ''CRC Handbook of chemistry and physics'', 79th ed., CRC Press, Boca Raton, Florida,
*Lidin RA 1996, ''Inorganic substances handbook'', Begell House, New York,
*
*
*Marlowe MO 1970, ''Elastic properties of three grades of fine grained graphite to 2000 °C'', NASA CR‒66933, National Aeronautics and Space Administration, Scientific and Technical Information Facility, College Park, Maryland
*Martienssen W & Warlimont H (eds) 2005, ''Springer Handbook of Condensed Matter and Materials Data'', Springer, Heidelberg,
*
*McQuarrie DA & Rock PA 1987, ''General chemistry'', 3rd ed., WH Freeman, New York
*Mendeléeff DI 1897, ''The Principles of Chemistry'', vol. 2, 5th ed., trans. G Kamensky, AJ Greenaway (ed.), Longmans, Green & Co., London
*
*Metcalfe HC, Williams JE & Castka JF 1966, ''Modern chemistry'', 3rd ed., Holt, Rinehart and Winston, New York
*
*Moss TS 1952, ''Photoconductivity in the Elements'', London, Butterworths
*Mott NF & Davis EA 2012, 'Electronic Processes in Non-Crystalline Materials', 2nd ed., Oxford University Press, Oxford,
*
*Nemodruk AA & Karalova ZK 1969, ''Analytical chemistry of boron'', R Kondor trans., Ann Arbor Humphrey Science, Ann Arbor, Michigan
*''New Scientist'' 1975, 'Chemistry on the islands of stability', 11 Sep, p. 574, ISSN 1032-1233
*
*
*Orton JW 2004, ''The story of semiconductors'', Oxford University, Oxford,
*Parish RV 1977, ''The metallic elements'', Longman, London
*Partington JR 1944, ''A text-book of inorganic chemistry'', 5th ed., Macmillan & Co., London
*Pauling L 1988,
General chemistry
', Dover Publications, NY,
*Perkins D 1998, ''Mineralogy'', Prentice Hall Books, Upper Saddle River, New Jersey,
*Pottenger FM & Bowes EE 1976, ''Fundamentals of chemistry'', Scott, Foresman and Co., Glenview, Illinois
*
*
*Rao KY 2002
''Structural chemistry of glasses''
Elsevier, Oxford,
*Raub CJ & Griffith WP 1980, 'Osmium and sulphur', in ''Gmelin handbook of inorganic chemistry'', 8th ed., 'Os, Osmium: Supplement', K Swars (ed.), system no. 66, Springer-Verlag, Berlin, pp. 166–170,
*
*Reynolds WN 1969, ''Physical properties of graphite'', Elsevier, Amsterdam
*Rochow EG 1966, ''The metalloids'', DC Heath and Company, Boston
*Rock PA & Gerhold GA 1974, ''Chemistry: Principles and applications'', WB Saunders, Philadelphia
*Russell JB 1981, ''General chemistry'', McGraw-Hill, Auckland
*Russell AM & Lee KL 2005
''Structure-property relations in nonferrous metals''
Wiley-Interscience, New York,
*Sacks O 2001, ''Uncle Tungsten: Memories of a chemical boyhood'', Alfred A Knopf, New York,
*Sanderson RT 1960, ''Chemical periodicity'', Reinhold Publishing, New York
*Sanderson RT 1967, ''Inorganic chemistry'', Reinhold, New York
*Sanderson K 2012, 'Stinky rocks hide Earth's only haven for natural fluorine', ''Nature News'', July,
*Schaefer JC 1968, 'Boron' in CA Hampel (ed.), ''The encyclopedia of the chemical elements'', Reinhold, New York, pp. 73–81
*Sidgwick NV 1950, ''The chemical elements and their compounds'', vol. 1, Clarendon, Oxford
*
*Sisler HH 1973, ''Electronic structure, properties, and the periodic law'', Van Nostrand, New York
*Slezak 2014
'Natural ball lightning probed for the first time'
''New Scientist'', 16 January
*Slough W 1972, 'Discussion of session 2b: Crystal structure and bond mechanism of metallic compounds', in O Kubaschewski (ed.), ''Metallurgical chemistry, proceedings of a symposium held at Brunel University and the National Physical Laboratory on the 14, 15 and 16 July 1971'', Her Majesty's Stationery Office or theNational Physical Laboratory, London
*Slyh JA 1955, 'Graphite', in JF Hogerton & RC Grass (eds), ''Reactor handbook: Materials'', US Atomic Energy Commission, McGraw Hill, New York, pp. 133‒154
*Smith A 1921, ''General chemistry for colleges'', 2nd ed., Century, New York
*Sneed MC 1954, ''General college chemistry'', Van Nostrand, New York
*
*Soverna S 2004
'Indication for a gaseous element 112'
in U Grundinger (ed.), ''GSI Scientific Report 2003'', GSI Report 2004-1, p. 187, ISSN 0174-0814
*Stoker HS 2010
''General, organic, and biological chemistry''
5th ed., Brooks/Cole, Cengage Learning, Belmont CA,
*Stoye, E., 2014
'Iridium forms compound in +9 oxidation state'
''Chemistry World'', 22 October 2014
*
*
*Sundara Rao RVG 1954, 'Erratum to: Elastic constants of orthorhombic sulphur', ''Proceedings of the Indian Academy of Sciences, Section A'', vol. 40, no. 3, p. 151
*Swalin RA 1962, ''Thermodynamics of solids'', John Wiley & Sons, New York
*Tilley RJD 2004, ''Understanding solids: The science of materials'', 4th ed., John Wiley, New York
*Walker JD, Newman MC & Enache M 2013, ''Fundamental QSARs for metal ions'', CRC Press, Boca Raton,
*
*Wiberg N 2001,
Inorganic chemistry
', Academic Press, San Diego,
*
*Wickleder MS 2007, 'Chalcogen-oxygen chemistry', in FA Devillanova (ed.), ''Handbook of chalcogen chemistry: new perspectives in sulfur, selenium and tellurium'', RSC, Cambridge, pp. 344–377,
*Wilson JR 1965, 'The structure of liquid metals and alloys', ''Metallurgical reviews'', vol. 10, p. 502
*Wilson AH 1966, ''Thermodynamics and statistical mechanics'', Cambridge University, Cambridge
*Witczak Z, Goncharova VA & Witczak PP 2000, 'Irreversible effect of hydrostatic pressure on the elastic properties of polycrystalline tellurium', in MH Manghnani, WJ Nellis & MF Nicol (eds), ''Science and technology of high pressure: Proceedings of the International Conference on High Pressure Science and Technology (AIRAPT-17)'', Honolulu, Hawaii, 25‒30 July 1999, vol. 2, Universities Press, Hyderabad, pp. 822‒825,
*Witt SF 1991
'Dimethylmercury'
''Occupational Safety & Health Administration Hazard Information Bulletin'', US Department of Labor, February 15, accessed 8 May 2015
*
*Wulfsberg G 2000,
Inorganic chemistry
', University Science Books, Sausalito CA,
*Young RV & Sessine S (eds) 2000, ''World of chemistry'', Gale Group, Farmington Hills, Michigan
*Zhigal'skii GP & Jones BK 2003, ''Physical properties of thin metal films'', Taylor & Francis, London,
*Zuckerman & Hagen (eds) 1991, ''Inorganic reactions and methods, vol, 5: The formation of bonds to group VIB ( O, S, Se, Te, Po) elements'' (part 1), VCH Publishers, Deerfield Beach, Fla,

{{Periodic table (navbox)

Metals
Metalloids
Nonmetals