Loop 500
Loop 500 is located in Shelby County. It runs from US 96 northwest of Center to SH 7 southwest of Center. Loop 500 was designated on April 29, 1971, as a loop off SH 7 in Center. On August 26, 2010, the northern section was extended west 2.9 miles to US 96 northwest of Center.Loop 505
Loop 505 is located inLoop 506
Loop 506 was located in Wise County. It is now Business US 81.Loop 507
Loop 507 was designated on August 31, 1972, as a loop off SH 6 in Bryan-College Station. The route was signed as SH 6 Business rather than Loop 507. On June 21, 1990, Loop 507 was cancelled and transferred to Business SH 6-R.Loop 508
Loop 508 was designated on August 31, 1972, as a loop off SH 6 in Navasota. The route was signed as SH 6 Business rather than Loop 508. On June 21, 1990, Loop 508 was cancelled and transferred to Business SH 6-S.Loop 509
Loop 509 was designated on July 31, 1972, as a loop off SH 78 in Copeville along an old routing of SH 78. on June 21, 1990, Loop 509 was cancelled and transferred to Business SH 78-F.Loop 512
Loop 512 was designated on November 3, 1972, as a loop off US 59 in Splendora along an old routing of US 59. The route was signed as US 59 Business rather than Loop 512. On June 21, 1990, Loop 512 was cancelled and transferred to Business US 59-L.Loop 513
Loop 513 was designated on September 4, 1973, as a loop off SH 123 in Seguin along an old routing of SH 123. The route was signed as SH 123 Business rather than Loop 513. On June 21, 1990, Loop 513 was cancelled and transferred to Business SH 123-B.Loop 516
Loop 516 was designated on May 31, 1973, as a loop off US 181 in Beeville along an old routing of US 181. The route was signed as US 181 Business rather than Loop 516. On June 21, 1990, Loop 516 was cancelled and transferred to Business US 181-J.Loop 517
Loop 517 is located inLoop 518
Loop 518 was designated on November 25, 1975, as a loop off US 190 in Killeen along an old routing of US 190. The route was signed as US 190 Business instead of Loop 518. On June 21, 1990, Loop 518 was cancelled and transferred to Business US 190-F.Loop 519
Loop 519 was located in Culberson County. It was the former alignment of US 80 through Van Horn. It is now Business I-10.Loop 520
Loop 520 was designated on November 25, 1975, as a loop off SH 171 in Covington along an old routing of SH 171. On June 21, 1990, Loop 520 was cancelled and transferred to Business SH 171-E.Loop 521
Loop 521 is located in Jackson County. It runs from US 59 east of Edna to US 59 west of Edna. Loop 521 was designated on June 30, 1976, on the current route along an old routing of US 59.Loop 522
Loop 522 is located in Jackson County. It runs from US 59 east of Ganado to US 59 west of Ganado. Loop 522 was designated on June 30, 1976, on the current route along an old routing of US 59; the route was signed as US 59 Business rather than Loop 522.Loop 523
Loop 523 is located inLoop 524
Loop 524 is located inLoop 525
Loop 525 was designated on August 23, 1976, as a loop off US 59 in El Campo along an old routing of US 59. The route was signed as US 59 Business rather than Loop 525. On April 23, 1997, Spur 525 was cancelled and transferred to Business US 59-S.Loop 526
Loop 526 is located inLoop 528
Loop 528 was designated on August 23, 1976, as a loop off US 287 in Waxahachie along an old routing of US 287. The route was signed as US 287 Business rather than Loop 528. On June 21, 1990, Loop 528 was cancelled and transferred to Business US 287-R.Loop 530
Loop 530 was designated on November 23, 1976, as a loop off US 190 in Belton along an old routing of US 190. On October 26, 2000, by district request, Loop 530 was cancelled and removed from the highway system due to the city of Belton planning utility improvements along the route.Loop 531
Loop 531 was designated on January 20, 1977, as a loop off US 287 in Grapeland along an old routing of US 287. On July 31, 2003, Loop 531 was cancelled by district request and redesignated as Business US 287-V.Loop 532
Loop 532 was located in Encinal. It is now Business I-35.Loop 533
Loop 533 is located inLoop 534
Loop 534, also known as Veterans Highway, is located inLoop 538
Loop 538 was designated on January 24, 1978, from FM 78, 0.5 mile east of SH 218, east and northeast to FM 78 near Live Oak Road (now Schertz Parkway) in Schertz. The route was never built, and was cancelled on June 18, 1996.Loop 539
Loop 539 was designated on January 24, 1978, from FM 78, 0.3 mile west of FM 1103, east and northeast to FM 78 near Haeckerville Road in Cibolo. On September 26, 1996, the road was rerouted along old FM 78 through Cibolo after FM 78 was rerouted south of town. On November 20, 2014, Loop 539 was cancelled and returned to the city of Cibolo.Loop 540
Loop 540 is located in Fort Bend County. It begins northeast of Beasley at an exit ramp off southbound Future I-69/ US 59, about past the intersection with Daily Road. Initially one-way, it runs southwest alongside theLoop 541
Loop 541 is located in Fort Bend County. It begins northeast of Kendleton at an exit ramp off southbound Future I-69/ US 59. It runs southwest along theLoop 543
Loop 543 is located in Fayette County. It runs from SH 71 west of West Point to SH 71 east of West Point. Loop 543 was designated on February 7, 1983, on the current route along an old routing of SH 71.Loop 544
Loop 544 was designated on February 23, 1983, as a loop off US 84 in Roscoe. On June 21, 1990, Loop 544 was cancelled and transferred to Business US 84-J.Loop 545
Loop 545 was designated on April 20, 1984, from US 67 northeast 5.1 miles to Main Street, then north along Main Street 0.5 mile to US 67 along an old routing of US 67. On March 29, 1988, a 1.1 mile section from US 87 to FM 380 was removed and returned to the city of San Angelo. The remainder of Loop 545 was cancelled on November 21, 1996, and transferred to Business US 67-H.Loop 546
Loop 546 was designated on April 9, 1984, from Loop 250 east and south 3.5 miles to Wall Avenue, then east 1.3 miles along Wall Avenue to SH 349 (now Business SH 349), then south along SH 349 to Florida Avenue, then southeast 2.5 miles along Florida Avenue and Garden City Highway to I-20/SH 158 along an old routing of SH 158. On June 21, 1990, Loop 546 was cancelled and transferred to Business SH 158-B.Loop 547
Loop 547 is located in San Augustine County. Both of its termini are at SH 21 within theLoop 549
Loop 549 was designated on September 27, 1985, from SH 70, 2 miles west of Sweetwater, south 2 miles to Loop 432 (now Business I-20). The route was signed, but not designated, as SH 70. Loop 549 was cancelled on June 21, 1990, as the SH 70 designation became official.Loop 550
Loop 550 was designated on April 18, 1985, as a loop off I-40 in Adrian along an old routing of US 66. On June 21, 1990, Loop 550 was cancelled and transferred to Business I-40-B.Loop 551
Loop 551 was designated on April 18, 1985, as a loop off I-40 in Vega along an old routing of US 66. On June 21, 1990, Loop 551 was cancelled and transferred to Business I-40-C.Loop 552
Loop 552 was designated on April 18, 1985, from I-40 west of Amarillo east, north, and east 9 miles to US 60/US 87, then east and northeast 10.8 miles along US 60 to its intersection with Loop 552, then southeast 4.6 miles to I-40 along an old routing of US 66. On October 25, 1990, Loop 552 was cancelled and transferred to Business I-40-D.Loop 554
Loop 554 was designated on April 18, 1985, as a loop off I-40 in Groom along an old routing of US 66. On June 21, 1990, Loop 554 was cancelled and transferred to Business I-40-F.Loop 555
Loop 555 was designated on April 18, 1985, as a loop off I-40 in McLean along an old routing of US 66. On June 21, 1990, Loop 555 was cancelled and transferred to Business I-40-H.Loop 556
Loop 556 was designated on April 18, 1985, as a loop off I-40 in Shamrock along an old routing of US 66. On March 24, 1993, Loop 556 was cancelled and transferred to Business I-40-J.Loop 558
Loop 558 was designated on January 15, 1986, from SH 35 southwest and west 4.9 miles to the intersection of SH 35 and SH 288. On February 25, 1987, the route was transferred to SH 35 and Loop 558 was reassigned to an old routing of SH 35 from SH 288 east 3.7 miles to SH 35. Loop 558 was cancelled on September 29, 1992, and transferred to FM 523.Loop 560
Loop 560 was located inLoop 561
Loop 561 is located in Ellis County. It is the former alignment of US 75 throughLoop 562
Loop 562 was located in Ellis County. It was the former alignment of US 75 through Palmer. It is now Business I-45.Loop 564
Loop 564 encircles Mineola. Loop 564 was designated on March 25, 2010, on the current route as a replacement of FM 564.Loop 564 (1987)
A previous route designated Loop 564 was located inLoop 566
Loop 566 was designated on May 2, 1988, from US 287/SH 283, south along SH 6, then west to US 277 along an old routing of US 277. On June 21, 1990, Loop 566 was cancelled and transferred to Business US 277-G.Loop 567
Loop 567 is located in Hood County. It runs from US 377 west of Granbury to Business US 377-H east of Granbury. Loop 567 was designated on November 25, 1986, from US 377 west of Granbury northeast to FM 51 north of town. On May 25, 2000, by district request, the road was extended 2.25 miles east and south to Business US 377-H.Loop 569
Loop 569 was designated on April 23, 1987, as a loop off US 380 in Decatur along an old routing of US 380. On June 21, 1990, Loop 569 was cancelled and transferred to Business US 380-F.Loop 570
Loop 570 is located in Tom Green County. It is the former route of US 87 throughLoop 571
Loop 571 is located in Rusk County. It runs from US 259 north of Henderson to US 259 south of Henderson. Loop 571 was designated on September 29, 1987, on the current route as a replacement of FM 454.Loop 573
Loop 573 is located in Liberty County. It runs from US 59 north of Cleveland to US 59 south of Cleveland. Loop 573 was designated on December 31, 1987, on the current route along an old routing of US 59.Loop 574
Loop 574 is located inLoop 577
Loop 577 is located in Concho County. It is the former route of US 87 through Vick.Loop 590
Loop 590 was designated on April 26, 1989, from US 77 south and southwest 13.9 miles along Helen Moore Road (now Paso Real Highway) to US 77/US 83 (now I-69E). On December 21, 1994, Loop 590 was cancelled and redesignated as FM 509 to provide a continuous route for FM 509.Loop 592
Loop 592 is located in Bell County. It runs from US 190/I-14 east of Nolanville to US 190/I-14 at Paddy Hamilton Road. The route is unsigned. Loop 592 was designated on May 24, 1990, on the current route.Loop 593
Loop 593 was a proposed route inLoop 635
Loop 635 was located inLoop 820
Loop 820 was located in Tarrant County. It was the temporary designation for segments ofLoop 1604
Loop 1604 serves as the outer highway loop ofLoop 1853
Loop 1853 is a proposed loop around the south side of Madisonville as a relief route for SH 21, which is routed through the city. It is proposed to run from US 190/SH 21, east of FM 1452, to another point on SH 21, west of FM 2346. Loop 1853 is expected to have two lanes in each direction with four overpasses, at SH 90, SH 75, I-45, and a city-owned road. TxDOT projects construction to begin in 2026. The number was chosen to commemorate the year that Madison County was established.References
{{DEFAULTSORT:List of state highway loops in Texas (500-9999) +5 State highway loops 500 State highway loops 500