HOME

TheInfoList



OR:

Jones, Turner and Evans was a
locomotive A locomotive or engine is a rail transport vehicle that provides the Power (physics), motive power for a train. If a locomotive is capable of carrying a payload, it is usually rather referred to as a multiple unit, Motor coach (rail), motor ...
manufacturer in
Newton-le-Willows Newton-le-Willows is a market town in the Metropolitan Borough of St Helens, Merseyside, England. The population at the 2011 census was 22,114. Newton-le-Willows is on the eastern edge of St Helens, south of Wigan and north of Warrington. The ...
,
England England is a country that is part of the United Kingdom. It shares land borders with Wales to its west and Scotland to its north. The Irish Sea lies northwest and the Celtic Sea to the southwest. It is separated from continental Europe b ...
from 1837, known as Jones and Potts between 1844 and 1852.


Jones, Turner and Evans

The company opened in 1837 with subcontracts from
Edward Bury Edward Bury (22 October 1794 – 25 November 1858) was an English locomotive manufacturer. Born in Salford, Lancashire, he was the son of a timber merchant and was educated at Chester. Career By 1823 he was a partner in Gregson and Bury's ste ...
and
Robert Stephenson Robert Stephenson Fellow of the Royal Society, FRS HFRSE FRSA Doctor of Civil Law, DCL (16 October 1803 – 12 October 1859) was an English civil engineer and designer of locomotives. The only son of George Stephenson, the "Father of Railway ...
. They provided locomotives for the
North Union Railway The North Union Railway was an early British railway company, operating in Lancashire. It was created in 1834, continuing independently until 1889. Formation The North Union Railway (NUR) was created by an Act of Parliament on 22 May 1834 whic ...
and the
Midland Counties Railway The Midland Counties' Railway (MCR) was a railway company in the United Kingdom which existed between 1839 and 1844, connecting Nottingham, Leicester and Derby with Rugby and thence, via the London and Birmingham Railway, to London. The MCR s ...
(MCR), the latter all
2-2-2 Under the Whyte notation for the classification of steam locomotives, 2-2-2 represents the wheel arrangement of two leading wheels on one axle, two powered driving wheels on one axle, and two trailing wheels on one axle. The wheel arrangement both ...
with diameter driving wheels, and cylinders. In 1840, they built two four-coupled
0-4-2 Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement with no leading wheels, four powered and coupled driving wheels on two axles and two trailing wheels on one axle. While the first locomotiv ...
s for the MCR. Further orders included engines for the Great Northern Railway,
London and Brighton Railway The London and Brighton Railway (L&BR) was a railway company in England which was incorporated in 1837 and survived until 1846. Its railway ran from a junction with the London and Croydon Railway (L&CR) at Norwood – which gives it access fro ...
and the
Grand Junction Railway The Grand Junction Railway (GJR) was an early railway company in the United Kingdom, which existed between 1833 and 1846 when it was amalgamated with other railways to form the London and North Western Railway. The line built by the company w ...
. They also supplied six broad gauge engines for the
Great Western Railway The Great Western Railway (GWR) was a British railway company that linked London with the southwest, west and West Midlands of England and most of Wales. It was founded in 1833, received its enabling Act of Parliament on 31 August 1835 and ran ...
, the first of the class being ''Firefly''. In 1841 built four for the
Eastern Counties Railway The Eastern Counties Railway (ECR) was an English Rail transport, railway company incorporated in 1836 intended to link London with Ipswich via Colchester, and then extend to Norwich and Great Yarmouth, Yarmouth. Construction began in 1837 on t ...
. Also in 1841 they exported two 0-4-2 locomotives to Austria: ''Minotaurus'' and ''Ajax''. ''Ajax'' is now the oldest preserved steam locomotive in mainland Europe. It was built for the inauguration of the '' Kaiser Ferdinands-Nordbahn'' in 1837. Originally built to transport goods it was, due to its large wheels and capability for high speeds, used for passenger services also. In 1874 it was withdrawn from service but not scrapped. From 1897 ''Ajax was stored at the Austrian Railway Museum. In 1908 on the occasion of the 70th anniversary of the ''Kaiser Ferdinands-Nordbahn'' it was restored and shortly afterwards transferred to the '' Techisches Museum'' in Vienna, where it is still on display.


Jones and Potts

After the initial railway boom, by 1844, orders were becoming slack and Jones formed a partnership with Arthur Potts, renaming the company Jones and Potts. Mr. Potts was instrumental in securing many more orders, particularly from the Eastern Counties Railway. Two long-boilered freight locomotives, No. 36 and 37 ''Bristol'' and ''Hercules'', were supplied to the
Birmingham and Gloucester Railway The Birmingham and Gloucester Railway (B&GR) was the first name of the railway linking the cities in its name and of the company which pioneered and developed it; the line opened in stages in 1840, using a terminus at Camp Hill in Birmingham. It ...
in June 1844. On
Midland Railway The Midland Railway (MR) was a railway company in the United Kingdom from 1844. The Midland was one of the largest railway companies in Britain in the early 20th century, and the largest employer in Derby, where it had its headquarters. It am ...
takeover they were renumbered 222 and 223 and rebuilt around 1855 as
Well tank A tank locomotive or tank engine is a steam locomotive that carries its water in one or more on-board water tanks, instead of a more traditional tender. Most tank engines also have bunkers (or fuel tanks) to hold fuel; in a tender-tank locomo ...
s and assigned to banking duties on the
Lickey Incline The Lickey Incline, south of Birmingham, is the steepest sustained main-line railway incline in Great Britain. The climb is a gradient of 1 in 37.7 (2.65% or 26.5‰ or 1.52°) for a continuous distance of two miles (3.2 km). Constructed ...
.


Locomotive designs

By 1850, the design of most of the locos was to Alexander Allan's pattern, with outside cylinders, and the ''long-boiler''
4-2-0 Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle and no trailing wheels. This type of locomotive is often called a ...
popularised by Robert Stephenson. As a result, they had a very rough ride and derailed frequently. They also built five
0-6-0 Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles and no trailing wheels. This was the most common wheel arrangemen ...
engines for the Scottish lines, which, however were converted to 0-4-2. Seven 2-2-2 well
tank engine A tank locomotive or tank engine is a steam locomotive that carries its water in one or more on-board water tanks, instead of a more traditional tender. Most tank engines also have bunkers (or fuel tanks) to hold fuel; in a tender-tank locomot ...
s were provided to the
London and Blackwall Railway Originally called the Commercial Railway, the London and Blackwall Railway (L&BR) in east London, England, ran from Minories to Blackwall, London, Blackwall via Stepney, with a branch line to the Isle of Dogs, connecting central London to many o ...
which served for many years.


Closure

Business tailed off again, and the company closed down in 1852. The works were leased by the
London and North Western Railway The London and North Western Railway (LNWR, L&NWR) was a British railway company between 1846 and 1922. In the late 19th century, the L&NWR was the largest joint stock company in the United Kingdom. In 1923, it became a constituent of the Lo ...
, who then bought it outright in 1860, forming the nucleus of the
Earlestown railway works Earlestown is a town and electoral ward in the Metropolitan Borough of St Helens in Merseyside, England. It forms the western part of the wider Newton-le-Willows urban area. At the United Kingdom Census 2011, 2011 Census the ward population was ...
.


John Jones and Son

One partner, John Jones, however carried on as John Jones and Son with a factory in
Liverpool Liverpool is a city and metropolitan borough in Merseyside, England. With a population of in 2019, it is the 10th largest English district by population and its metropolitan area is the fifth largest in the United Kingdom, with a popul ...
to continue building locomotives, until 1863. The firm continued beyond his death in 1866, making marine boilers and marine steam engines in the St George's Engine Works. In adverts the firm claimed to have been established in 1832, which is when John Jones dissolved his partnership with William Yates at the
Newton-le-Willows Newton-le-Willows is a market town in the Metropolitan Borough of St Helens, Merseyside, England. The population at the 2011 census was 22,114. Newton-le-Willows is on the eastern edge of St Helens, south of Wigan and north of Warrington. The ...
Viaduct Foundry. By 1900 the firm was building ships at their yard in Tranmere Bay, such as the steam ferries Lily and Rose built for Wallasey corporation in 1900. In December 1900, noting the decline in shipbuilding in the Mersey area, it was said that Laird Brothers Ltd and John Jones and Sons were the only 2 remaining firms who are in any sense producers of new shipping. During 1900 Messrs John Jones & Sons (of Liverpool and Tranmere) had produced 13 small vessels with an aggregate tonnage of 2802 tons. The ship building facility appears to have been sold to the Tranmere Bay Development Company (formed by Laird Brothers at the end of 1902), but the production of engines at the St George's Engine Works continued. As examples of their production, in 1872 Messrs John Jones & Sons built the 80 nominal HP engines for two screw steamers, Miguel Saenz and Moratin. In 1894 they are noted as producing the boilers for the Dublin Steam Packet "Liverpool" - at 80 tons the largest boilers ever made in Liverpool. Messrs John Jones & Sons of Liverpool built the Eastham Ferry paddle steamers Ruby and Pearl in 1897 and the Sapphire in 1898. These operated until 1929 and were the last paddle steamers on the Mersey. In Lloyd's List for 1901 the company is referred to as Messrs John Jones & Sons of Tranmere, and production for 1901 was 12 vessels aggregating 4745 tons. The twin-screw steam tug 'Seti' launched by the Tranmere Bay Development company on April 30th 1904, was then to have its engines and boiler installed by John Jones & Bros at their St George's works.Lloyd's List, 3 May 1904, p13


References

* * {{Refend


External links


The Viaduct Foundry
Locomotive manufacturers of the United Kingdom British companies established in 1837