Chrysler Neon Engine
   HOME

TheInfoList



OR:

The Chrysler 1.8, 2.0, and 2.4 are
inline-4 engine A straight-four engine (also called an inline-four) is a four-cylinder piston engine where cylinders are arranged in a line along a common crankshaft. The vast majority of automotive four-cylinder engines use a straight-four layout (with the e ...
s designed originally for the Dodge and Plymouth Neon compact car. These engines were loosely based on their predecessors, the Chrysler 2.2 & 2.5 engine, sharing the same bore. The engine was developed by Chrysler with input from the Chrysler-Lamborghini team that developed the Chrysler/Lamborghini Formula 1 V12 engine in the early 1990s. Beginning in 2005, these engines were phased out in favor of the new World engine built by the
Global Engine Manufacturing Alliance Global Engine Alliance LLC, began as a joint venture of Chrysler, Mitsubishi Motors, and Hyundai Motor Company for developing a line of shared engines. In September 2009, Chrysler purchased Mitsubishi and Hyundai's shares, after 5 years of all ...
joint-venture. The 2.0 and 2.4 variants were built at
Saltillo Engine Saltillo Engine is a Chrysler engine plant in Ramos Arizpe, Coahuila, Mexico. The factory opened in 1981. It was built as a scale model of the plant at Trenton, Michigan, United States, but with more work flexibility, having only 20 job classifica ...
in
Ramos Arizpe, Coahuila Ramos Arizpe () is a city and seat of the surrounding municipality of the same name in the Mexican state of Coahuila. Ramos Arizpe is located 11 km from the state capital of Saltillo. It is part of the Saltillo metropolitan area. The city ...
, Mexico. The 1.8 and 2.0 was also built at
Trenton Engine Trenton Engine Complex is Stellantis North America automotive factory complex in Trenton, Michigan. It is composed of two plants, North and South. The north factory opened in 1952 while the south plant opened in 2010. Both factories manufacture 3 ...
in
Trenton, Michigan Trenton is a city in Wayne County, Michigan, United States. At the 2010 census, the city population was 18,853. A Shawnee village was built in the area by war chief Blue Jacket after the 1795 Treaty of Greenville. The area later became the site ...
, United States.


1.8

The EBD is a 1.8 L (1796 cc/109.6 cid), under-bored variant of the 2.0 L engine. This engine features a
square In Euclidean geometry, a square is a regular quadrilateral, which means that it has four equal sides and four equal angles (90-degree angles, π/2 radian angles, or right angles). It can also be defined as a rectangle with two equal-length adj ...
bore and stroke with a 10.0:1 compression ratio. This engine was built at the
Trenton Engine Plant Trenton Engine Complex is Stellantis North America automotive factory complex in Trenton, Michigan. It is composed of two plants, North and South. The north factory opened in 1952 while the south plant opened in 2010. Both factories manufacture 3 ...
for use in export market (non-US)
Chrysler Neon The Chrysler/Dodge/Plymouth Neon is a front-engine, front-wheel drive compact car that was introduced in January 1994 for model year 1995 by Chrysler's Dodge and Plymouth divisions in two- and four-door bodystyles over two generations. Marketed ...
s. It produces at 5750 rpm and at 4950 rpm and meets
Euro III The European emission standards are vehicle emission standards for pollution from the use of new land surface vehicles sold in the European Union and EEA member states and the UK, and ships in EU waters. The standards are defined in a ser ...
emission standard Emission standards are the legal requirements governing air pollutants released into the atmosphere. Emission standards set quantitative limits on the permissible amount of specific air pollutants that may be released from specific sources over ...
s. Applications: * 1997–1999
Chrysler Neon The Chrysler/Dodge/Plymouth Neon is a front-engine, front-wheel drive compact car that was introduced in January 1994 for model year 1995 by Chrysler's Dodge and Plymouth divisions in two- and four-door bodystyles over two generations. Marketed ...


2.0

The 2.0 L (1,996 cc/121.8 cid) version of the engine was the first offered. Production began in 1994 in
Trenton, MI Trenton is a city in Wayne County, Michigan, Wayne County, Michigan, United States. At the 2010 United States Census, 2010 census, the city population was 18,853. A Shawnee village was built in the area by war chief Blue Jacket after the 1795 Trea ...
, and it was used in many
Chrysler Corporation Stellantis North America (officially FCA US and formerly Chrysler ()) is one of the " Big Three" automobile manufacturers in the United States, headquartered in Auburn Hills, Michigan. It is the American subsidiary of the multinational automoti ...
vehicles. It is available in both
SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
and
DOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
16-valve versions (4 valves per cylinder). The engine features a cast iron
block Block or blocked may refer to: Arts, entertainment and media Broadcasting * Block programming, the result of a programming strategy in broadcasting * W242BX, a radio station licensed to Greenville, South Carolina, United States known as ''96.3 ...
, and pistons with shallow crowns to save weight. The block uses a bedplate featuring a perimeter wall with transverse webbings for durability and quiet operation at high engine speeds. The pistons are attached to fracture-split forged, powdered metal connecting rods using semi-floating press-fit pins. A
gerotor A gerotor is a positive displacement pump. The name ''gerotor'' is derived from "generated rotor". A gerotor unit consists of an inner and outer rotor. The inner rotor has ''n'' teeth, while the outer rotor has ''n''+1 teeth; with ''n'' defined a ...
oil pump is driven directly from the
crankshaft A crankshaft is a mechanical component used in a piston engine to convert the reciprocating motion into rotational motion. The crankshaft is a rotating shaft containing one or more crankpins, that are driven by the pistons via the connecting ...
on the front of the engine. A timing belt is used to drive the
valvetrain A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
. Early production 2.0 L engines used a hydraulic tensioner to tension the timing belt. 2000 and 2001 engines used a mechanical spring-loaded tensioner that tended to wear out prematurely, causing serious valve and piston damage upon belt failure due to the interference design of the engine. 2002 and up engines utilized a different mechanical tensioner. The water pump is driven from the timing belt, with the water pump housing cast partially into the engine block itself. 1995 model year engines had three features that set them apart from later engines. The
positive crankcase ventilation A crankcase ventilation system removes unwanted gases from the crankcase of an internal combustion engine. The system usually consists of a tube, a one-way valve and a vacuum source (such as the inlet manifold). The unwanted gases, called "blow- ...
(PCV) system utilized a plastic oil separator box that was vented directly to the block itself; the breather hose and
PCV valve A crankcase ventilation system removes unwanted gases from the crankcase of an internal combustion engine. The system usually consists of a tube, a one-way valve and a vacuum source (such as the inlet manifold). The unwanted gases, called "blow- ...
hoses attached to the box, and connected to the induction system. Later engines featured a PCV system that was molded to the cylinder head
valve cover Rocker covers are covers that are bolted on over rocker arms in an internal combustion engine. They are called valve covers in the United States, Canada, and in situations where Rocker Arms are not present, such as some Overhead Cam, and most Du ...
. The second feature was internal in nature - the crankshaft
main bearing Main may refer to: Geography * Main River (disambiguation) **Most commonly the Main (river) in Germany * Main, Iran, a village in Fars Province *"Spanish Main", the Caribbean coasts of mainland Spanish territories in the 16th and 17th centuries ...
s were keyed into the bedplate on the right rear of each transverse web. Later model years featured keys machined on the right front of each web. The third feature would be a slightly bigger camshaft profile that was changed on 1996 and up SOHC vehicles due to a rough idle when the air conditioning was on. 2002 and earlier engines featured a one-piece cast nodular iron crankshaft with counterweights present on either side of each crank pin. A crankshaft tone wheel was present between number 1 and number 2 connecting rod pins, and was machined such that a Hall-effect magnetic pickup mounted to the engine block could read the crankshaft's position as it rotates. 2003 and later engines switched to a two-piece crankshaft. The tone wheel was re-engineered to attach to the crankshaft using three bolts, had a tone pattern substantially different from previous engines, and was moved to the rear of the crankshaft. For this reason, these engines are generally not interchangeable between the 2002 (and prior) and 2003 (and newer) model years. Up to late 1999, this engine type suffered from oil leaks and head gasket failures between the block and cylinder head. Chrysler Corporation used several different designs of composite material head gaskets in an attempt to solve this problem. The cause of the problem was found to be one head bolt hole that was drilled too shallow at the factory, meaning the head bolt bottomed out and could never seal properly. In 1998, a thicker, multi-layer steel head gasket was introduced that eliminated this problem. ;General Specifications *Cylinder Configuration: In-line 4 *Number of Valves: 16 (4 per cylinder) *Fuel Delivery:
Sequential multi-port fuel injection Fuel injection is the introduction of fuel in an internal combustion engine, most commonly automotive engines, by the means of an injector. This article focuses on fuel injection in reciprocating piston and Wankel rotary engines. All compr ...
*Bore x Stroke: *Displacement: *Redline: 6500 rpm *Rev Limiter: 6750 rpm


A588

The A588 is the
SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
version found in most post-2001 Chrysler products. The ECB SOHC version, found in earlier models, is identical except for the crank trigger wheel. When equipped with the newer crank wheel for the new NGC engine computer, the A588 version cannot be directly transplanted into a vehicle originally equipped with the earlier style engine using an SBEC (Single Board Engine Controller). Output is
SAE SAE or Sae may refer to: Science and technology : * Selective area epitaxy, local growth of epitaxial layer through a patterned dielectric mask deposited on a semiconductor substrate * Serious adverse event, in a clinical trial * Simultaneous Auth ...
at 5600 rpm with of torque at 4600 rpm. It has an aluminum SOHC cylinder head. It uses a reinforced plastic
intake manifold In automotive engineering, an inlet manifold or intake manifold (in American English) is the part of an engine that supplies the fuel/air mixture to the cylinders. The word ''manifold'' comes from the Old English word ''manigfeald'' (from the ...
(although a few of the 1995 and 1996 engines received an aluminum intake manifold due to a shortage of the plastic parts). They were painted black, but it's easy to see the casting marks and prints on the manifold. The aluminum version is prized among enthusiasts as it is easy to port and polish for improved airflow characteristics. Applications: * 1995–2005
Dodge Neon Dodge is an American brand of automobiles and a division of Stellantis, based in Auburn Hills, Michigan. Dodge vehicles have historically included performance cars, and for much of its existence Dodge was Chrysler's mid-priced brand above Ply ...
/
Plymouth Neon Plymouth () is a port city and unitary authority in South West England. It is located on the south coast of Devon, approximately south-west of Exeter and south-west of London. It is bordered by Cornwall to the west and south-west. Plymouth ...
* 1995–2000
Dodge Stratus The Dodge Stratus is a mid-size car that was introduced by Dodge in December 1994 and was based on the 4-door sedan Chrysler JA platform. The Stratus, Plymouth Breeze, and Chrysler Cirrus were all on ''Car and Driver'' magazine's Ten Best list ...
/
Plymouth Breeze The Chrysler Cirrus is a mid-sized 4-door notchback sedan introduced by Chrysler motors for the 1995 model year. Built on the Chrysler JA platform, the 4-door notchback sedan joined Chrysler's roster of "Cloud Car" models drawing their names ...
Specifications: *Compression Ratio: 9.8:1 *Camshaft Configuration:
SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
*Power: at 6000 rpm *Torque: at 4600 rpm


Magnum

The Magnum SOHC version, code ECH, develops
SAE SAE or Sae may refer to: Science and technology : * Selective area epitaxy, local growth of epitaxial layer through a patterned dielectric mask deposited on a semiconductor substrate * Serious adverse event, in a clinical trial * Simultaneous Auth ...
at 6500 rpm, and of torque at 4800 rpm. Chief differences between this version and the A588 include a cast aluminum SOHC cylinder head that more easily passes exhaust gases than the base engine, a camshaft that is optimized for higher engine speeds, a factory welded exhaust short-tube header instead of a cast exhaust manifold, and a two-piece intake manifold. This manifold features unequal-length intake runners that are switched by an electric actuator that controls butterfly-type valves in the shorter intake runners. The longer runners are always open, and provide a mild supercharging effect due to their length between 3000 rpm and 4800 rpm. The shorter runners, open from 4800 rpm to redline at wide-open throttle, also provide a tuned resonance effect due to their length. The shorter runners are also opened at wide-open throttle below 3000 rpm to provide an intake path to each cylinder that is as free-flowing as possible. Applications: *
Dodge Neon Dodge is an American brand of automobiles and a division of Stellantis, based in Auburn Hills, Michigan. Dodge vehicles have historically included performance cars, and for much of its existence Dodge was Chrysler's mid-priced brand above Ply ...
R/T (2001–2004)U.S (1998-2004)Canada *
Dodge Neon Dodge is an American brand of automobiles and a division of Stellantis, based in Auburn Hills, Michigan. Dodge vehicles have historically included performance cars, and for much of its existence Dodge was Chrysler's mid-priced brand above Ply ...
ACR (2001–2002)U.S (1998-2002)Canada Specifications: *Compression Ratio: 9.8:1 *Camshaft Configuration:
SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
*Power: @ 6500 rpm *Torque: @ 4800 rpm *Rev-Limiter: 6750 rpm


ECC

The
DOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
ECC 2.0 produces SAE at 6500 rpm with of torque at 4800 rpm. It has a cast iron engine block and aluminum
DOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
cylinder head. It uses
Sequential fuel injection Fuel injection is the introduction of fuel in an internal combustion engine, most commonly automotive engines, by the means of an injector. This article focuses on fuel injection in reciprocating piston and Wankel rotary engines. All compr ...
, has 4 valves per cylinder with roller rocker arms and features fracture-split forged powder metal
connecting rod A connecting rod, also called a 'con rod', is the part of a piston engine which connects the piston to the crankshaft. Together with the crank, the connecting rod converts the reciprocating motion of the piston into the rotation of the cranksh ...
s, a one-piece cast camshaft, and an aluminum intake manifold. The version used in the
PT Cruiser The Chrysler PT Cruiser is a retro-styled compact car manufactured and marketed internationally by Chrysler in 5-door hatchback wagon (2001–2010) and 2-door convertible (2005–2008) body styles—over a single generation, with an intermed ...
(non-US) and
Dodge Neon Dodge is an American brand of automobiles and a division of Stellantis, based in Auburn Hills, Michigan. Dodge vehicles have historically included performance cars, and for much of its existence Dodge was Chrysler's mid-priced brand above Ply ...
features a cylinder head with the intake ports facing the front of the vehicle, like the
SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
A588. The 420A used in the Dodge-designed chassis, such as the
Dodge Avenger The Dodge Avenger is a front-wheel drive, mid-sized sedan that was marketed by Dodge. The Avenger made its North American debut in 1994 for the 1995 model year as a coupe that was produced until 2000. The model name was reintroduced to the ...
and
Mitsubishi Eclipse The Mitsubishi Eclipse is a sport compact car that was produced by Mitsubishi Motors, Mitsubishi in four generations from 1989 until 2011. A convertible body style was added during the 1996 model year. The first two generations share the autom ...
, have intake ports facing the rear of the vehicle. Most other specifications are identical, however, and even some head components (such as the valve cover) are compatible. Applications: *
Dodge Neon Dodge is an American brand of automobiles and a division of Stellantis, based in Auburn Hills, Michigan. Dodge vehicles have historically included performance cars, and for much of its existence Dodge was Chrysler's mid-priced brand above Ply ...
/
Plymouth Neon Plymouth () is a port city and unitary authority in South West England. It is located on the south coast of Devon, approximately south-west of Exeter and south-west of London. It is bordered by Cornwall to the west and south-west. Plymouth ...
(1995–1999) (ECC) *
Mitsubishi Eclipse The Mitsubishi Eclipse is a sport compact car that was produced by Mitsubishi Motors, Mitsubishi in four generations from 1989 until 2011. A convertible body style was added during the 1996 model year. The first two generations share the autom ...
/
Eagle Talon The Eagle Talon is a two-door 2+2, front-wheel drive (FWD) or all-wheel drive (AWD) hatchback coupé manufactured and marketed from 1989 until 1998 and sold by Eagle along with rebadged variants the Plymouth Laser and Mitsubishi Eclipse. The l ...
(second generation, 1995–1999) (420A) *
Dodge Avenger The Dodge Avenger is a front-wheel drive, mid-sized sedan that was marketed by Dodge. The Avenger made its North American debut in 1994 for the 1995 model year as a coupe that was produced until 2000. The model name was reintroduced to the ...
/
Chrysler Sebring The Chrysler Sebring ( ) is a line of mid-size automobiles that was sold from 1995 through 2010 by Chrysler. Three generations of convertibles, two generations of sedans, and two generations of coupes were produced. Although the coupe shared th ...
(1995–1999) (420A) *
Chrysler PT Cruiser The Chrysler PT Cruiser is a retro-styled compact car manufactured and marketed internationally by Chrysler in 5-door hatchback wagon (2001–2010) and 2-door convertible (2005–2008) body styles—over a single generation, with an intermedia ...
(non-US) (ECC) Specifications: *Compression Ratio: 9.6:1 *Camshaft Configuration:
DOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
*Displacement: *Power: @ 6500 rpm *Torque: @ 4800 rpm *Rev-Limiter: 7500 rpm


2.4 and 2.4 Turbo

The Neon used the naturally aspirated 2.4 in the models final year of 2005 ,same N/A version was used in Chrysler's JA, JX, and JR platform cars from 1995 to 2006 along with the
Jeep Liberty The Jeep Liberty is a four door unibody compact SUV four-door manufactured and marketed by Jeep for model years 2002–2012 over two generations, internally designed the KJ (2002-2007) and KK (2008-2012), respectively. Both generations were mark ...
from 2002 to 2005 and the
Dodge Caravan The Dodge Caravan (and the long-wheelbase Dodge Grand Caravan) is a series of minivans that was manufactured by Chrysler from the 1984 to 2020 model years. The Dodge version of the Chrysler minivans, the Caravan was marketed as both a passenger v ...
and
Plymouth Voyager Plymouth Voyager is a nameplate for a range of vans that were marketed by the Plymouth division of Chrysler. From 1974 until 1983, the Voyager was a full-size van, sold as the counterpart of Dodge Sportsman (later the Dodge Ram Wagon). For 1984 ...
from 1996 to 2000. The code for this engine was EDZ. As with some other engines of various architecture used in Jeeps, EDZs used in the Liberty carried Chrysler's PowerTech name. The first 2.4L turbocharged engine was the EDZ turbo (variant of regular EDZ engine and developed by Chrysler's Mexican division), used on the Mexican Dodge Stratus R/T & Cirrus since 1996 to 2000. The SRT-4 performance variant utilized a 2.4L Turbo. The
turbocharged In an internal combustion engine, a turbocharger (often called a turbo) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake gas, forcing more air into the engine in order to pro ...
EDV/EDT is similar to the regular EDZ. Output is SAE at 5300 rpm with of torque at 2200-4400 rpm. This engine, code A855, has a cast iron partially open deck block and split crankcase. It uses an 8.1:1 compression ratio with Mahle cast eutectic aluminum alloy pistons, forged connecting rods with cracked caps and threaded-in rod bolts, and a cast high-hardness steel crankshaft. The cylinder head is cast aluminum, with the cylinder heads being a 48-degree pent-roof design with a partial cloverleaf between the intake valves. The valves are actuated by hydraulically adjusted rocker arms with roller cam followers. The
SRT-4 The Dodge Neon SRT-4 is a sport compact car manufactured by Dodge from 2003 to 2005. A turbocharged variant of the Neon, the car was developed by DaimlerChrysler's in house PVO (Performance Vehicle Operations) tuner group. PVO was officially r ...
, PT Cruiser Turbo, Cirrus LXi éxico onlyand Stratus R/T éxico onlyuse the same engine block and heads. The intake manifold, reverse-rotation turbocharger, jet oil coolers, oil pump, manual transmission, special ecu tuning, intercooler size, and weight are the only differences between those cars. The cast-aluminum 8-row Valeo intercooler is mounted in the front, and the reverse-rotation Mitsubishi TD04LR-16Gk turbocharger has a turbine inlet. The turbocharger compressor housing features a built-in bypass valve, and the turbo housing is cast into the exhaust manifold with a loop-around flow pattern. The boost level of a stock SRT-4 varies anywhere from to , depending on the PCM's desired torque target and temperature conditions, but will be reduced if significant knock is detected. Such as using low octane (less than 91 R+M/2) gas. 2.4 N/A applications: * 1995–1998, 2000
Chrysler Cirrus The Chrysler Cirrus is a mid-sized 4-door notchback sedan introduced by Chrysler motors for the 1995 model year. Built on the Chrysler JA platform, the 4-door notchback sedan joined Chrysler's roster of "Cloud Car" models drawing their names ...
* 1995–2006
Chrysler Sebring The Chrysler Sebring ( ) is a line of mid-size automobiles that was sold from 1995 through 2010 by Chrysler. Three generations of convertibles, two generations of sedans, and two generations of coupes were produced. Although the coupe shared th ...
* 1995–2006
Dodge Stratus The Dodge Stratus is a mid-size car that was introduced by Dodge in December 1994 and was based on the 4-door sedan Chrysler JA platform. The Stratus, Plymouth Breeze, and Chrysler Cirrus were all on ''Car and Driver'' magazine's Ten Best list ...
* 1996–2007
Dodge Caravan The Dodge Caravan (and the long-wheelbase Dodge Grand Caravan) is a series of minivans that was manufactured by Chrysler from the 1984 to 2020 model years. The Dodge version of the Chrysler minivans, the Caravan was marketed as both a passenger v ...
* 1996–2000
Plymouth Voyager Plymouth Voyager is a nameplate for a range of vans that were marketed by the Plymouth division of Chrysler. From 1974 until 1983, the Voyager was a full-size van, sold as the counterpart of Dodge Sportsman (later the Dodge Ram Wagon). For 1984 ...
* 1996–2000
Plymouth Breeze The Chrysler Cirrus is a mid-sized 4-door notchback sedan introduced by Chrysler motors for the 1995 model year. Built on the Chrysler JA platform, the 4-door notchback sedan joined Chrysler's roster of "Cloud Car" models drawing their names ...
* 2001–2010
Chrysler PT Cruiser The Chrysler PT Cruiser is a retro-styled compact car manufactured and marketed internationally by Chrysler in 5-door hatchback wagon (2001–2010) and 2-door convertible (2005–2008) body styles—over a single generation, with an intermedia ...
* 2002–2005
Jeep Liberty The Jeep Liberty is a four door unibody compact SUV four-door manufactured and marketed by Jeep for model years 2002–2012 over two generations, internally designed the KJ (2002-2007) and KK (2008-2012), respectively. Both generations were mark ...
* 2003–2006
Jeep Wrangler The Jeep Wrangler is a series of compact and mid-size four-wheel drive off-road SUVs manufactured by Jeep since 1986 and is currently in its fourth generation. The Wrangler JL, the most recent generation, was revealed in late 2017 and is produ ...
* 2007–2010 GAZ-31105 Volga * 2008–2010
Volga Siber The GAZ Volga Siber (russian: Волга Сайбер) is a four-door sedan manufactured by the Russian firm GAZ, introduced at the 2007 Moscow International Automobile Salon and marketed in a single generation for model years 2008 to 2010. Man ...
2.4 Turbo Applications: * 2003–2005 Dodge Neon SRT4 * 2003–2007
Chrysler PT Cruiser The Chrysler PT Cruiser is a retro-styled compact car manufactured and marketed internationally by Chrysler in 5-door hatchback wagon (2001–2010) and 2-door convertible (2005–2008) body styles—over a single generation, with an intermedia ...
GT * 2004–2009
Chrysler PT Cruiser The Chrysler PT Cruiser is a retro-styled compact car manufactured and marketed internationally by Chrysler in 5-door hatchback wagon (2001–2010) and 2-door convertible (2005–2008) body styles—over a single generation, with an intermedia ...
Limited *
Dodge Stratus The Dodge Stratus is a mid-size car that was introduced by Dodge in December 1994 and was based on the 4-door sedan Chrysler JA platform. The Stratus, Plymouth Breeze, and Chrysler Cirrus were all on ''Car and Driver'' magazine's Ten Best list ...
R/T with EDZ turbo (México since 1996-2000) and EDV (México since 2001-2006) *
Chrysler Cirrus The Chrysler Cirrus is a mid-sized 4-door notchback sedan introduced by Chrysler motors for the 1995 model year. Built on the Chrysler JA platform, the 4-door notchback sedan joined Chrysler's roster of "Cloud Car" models drawing their names ...
LXi with EDZ turbo (México since 1996-2000) and EDV (México since 2001-2006)


See also

*
Tritec engine The Tritec engine (also known as Pentagon) is a four-cylinder petrol engine that was manufactured between 1999 and 2007 by Tritec Motors in Brazil and was used in various cars including Chrysler and Mini models. Tritec Motors Ltda In 1997, Chrysl ...
*
List of Chrysler engines Chrysler Four cylinder 1926–1933: Flathead 4 1981–1995: K Engine 1994–2010: PowerTech 2007–present: World Engine * 1.8, 2.0, and 2.4 "World Engine" (2007–2017) * 2.0 and 2.4 "Tigershark" (2012–present) Six cylinder 192 ...


References


External links


The Chrysler 2.0 liter engine - used mainly in Neons
{{DEFAULTSORT:Chrysler 1.8, 2.0 and 2.4 engine
Neon Neon is a chemical element with the symbol Ne and atomic number 10. It is a noble gas. Neon is a colorless, odorless, inert monatomic gas under standard conditions, with about two-thirds the density of air. It was discovered (along with krypton ...