|
Attack Time
In telecommunication, attack time is the time between the instant that a signal at the input of a device or circuit exceeds the activation threshold of the device or circuit and the instant that the device or circuit reacts in a specified manner, or to a specified degree, to the input. Attack time occurs in devices such as clippers, peak limiters, compressors, and voxes. See also * Transmitter attack-time delay *Federal Standard 1037C *Fall time *Overshoot (signal) *ADSR envelope ADSR may refer to: * ADSR envelope (attack decay sustain release), a common type of music envelope * Accelerator-driven sub-critical reactor, a nuclear reactor using a particle accelerator to generate a fission reaction in a sub-critical assembly ... References {{DEFAULTSORT:Attack Time Telecommunication theory Audio engineering ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telecommunication
Telecommunication is the transmission of information by various types of technologies over wire, radio, optical, or other electromagnetic systems. It has its origin in the desire of humans for communication over a distance greater than that feasible with the human voice, but with a similar scale of expediency; thus, slow systems (such as postal mail) are excluded from the field. The transmission media in telecommunication have evolved through numerous stages of technology, from beacons and other visual signals (such as smoke signals, semaphore telegraphs, signal flags, and optical heliographs), to electrical cable and electromagnetic radiation, including light. Such transmission paths are often divided into communication channels, which afford the advantages of multiplexing multiple concurrent communication sessions. ''Telecommunication'' is often used in its plural form. Other examples of pre-modern long-distance communication included audio messages, such as coded drumb ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Time
Time is the continued sequence of existence and events that occurs in an apparently irreversible succession from the past, through the present, into the future. It is a component quantity of various measurements used to sequence events, to compare the duration of events or the intervals between them, and to quantify rates of change of quantities in material reality or in the conscious experience. Time is often referred to as a fourth dimension, along with three spatial dimensions. Time has long been an important subject of study in religion, philosophy, and science, but defining it in a manner applicable to all fields without circularity has consistently eluded scholars. Nevertheless, diverse fields such as business, industry, sports, the sciences, and the performing arts all incorporate some notion of time into their respective measuring systems. 108 pages. Time in physics is operationally defined as "what a clock reads". The physical nature of time is addre ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Signal (information Theory)
In signal processing, a signal is a function that conveys information about a phenomenon. Any quantity that can vary over space or time can be used as a signal to share messages between observers. The ''IEEE Transactions on Signal Processing'' includes audio, video, speech, image, sonar, and radar as examples of signal. A signal may also be defined as observable change in a quantity over space or time (a time series), even if it does not carry information. In nature, signals can be actions done by an organism to alert other organisms, ranging from the release of plant chemicals to warn nearby plants of a predator, to sounds or motions made by animals to alert other animals of food. Signaling occurs in all organisms even at cellular levels, with cell signaling. Signaling theory, in evolutionary biology, proposes that a substantial driver for evolution is the ability of animals to communicate with each other by developing ways of signaling. In human engineering, signals are typi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Telecommunication Circuit
A telecommunication circuit is a path in a telecommunications network used to transmit information. Circuits have evolved over time from generally being built on physical connections between individual hardware cables, as in an analog phone switch, to virtual circuits established over packet switching networks. Definitions A telecommunication circuit may be defined as follows: * The complete path between two terminals over which one-way or two-way communications may be provided. * An electronic path between two or more points, capable of providing a single or multiple communication channels. * An electronic closed-loop path among two or more points used for signal transfer. In operational terms, a telecommunication circuit may be capable of transmitting information in only one direction (''simplex'' circuit), or it may be bi-directional (''duplex'' circuit). Bi-directional circuits may support half- duplex operation, when only one end of the channel transmits at any one time, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Clipping (audio)
Clipping is a form of waveform distortion that occurs when an amplifier is overdriven and attempts to deliver an output voltage or current beyond its maximum capability. Driving an amplifier into clipping may cause it to output power in excess of its power rating. In the frequency domain, clipping produces strong harmonics in the high-frequency range (as the clipped waveform comes closer to a squarewave). The extra high-frequency weighting of the signal could make tweeter damage more likely than if the signal was not clipped. In some cases, the distortion associated with clipping is unwanted, and is visible on an oscilloscope even if it is inaudible. However, clipping is often used in music for artistic effect, especially in heavier genres. Overview When an amplifier is pushed to create a signal with more power than its power supply can produce, it will amplify the signal only up to its maximum capacity, at which point the signal can be amplified no further. As the signa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Dynamic Range Compression
Dynamic range compression (DRC) or simply compression is an audio signal processing operation that reduces the volume of loud sounds or amplifies quiet sounds, thus reducing or ''compressing'' an audio signal's dynamic range. Compression is commonly used in sound recording and reproduction, broadcasting, sound reinforcement system, live sound reinforcement and in some instrument amplifiers. A dedicated electronic hardware unit or audio software that applies compression is called a compressor. In the 2000s, compressors became available as software plugins that run in digital audio workstation software. In recorded and live music, compression parameters may be adjusted to change the way they affect sounds. Compression and limiting are identical in process but different in degree and perceived effect. A limiter is a compressor with a high #Ratio, ratio and, generally, a short #Attack and release, attack time. Types There are two types of compression, downward and upward. Bot ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Voice Operated Switch
In telecommunications, a voice operated switch, also known as VOX or voice-operated exchange, is a switch that operates when sound over a certain threshold is detected. It is usually used to turn on a transmitter or recorder when someone speaks and turn it off when they stop speaking. It is used instead of a push-to-talk button on transmitters or to save storage space on recording devices. On cell phones, it is used to save battery life. Intercom systems that use a speaker in a room as both a speaker and a microphone will often use VOX on the main console to switch the audio direction during a conversation. The circuit usually includes a delay between the sound stopping and switching direction, to avoid the circuit turning off during short pauses in speech. A special case exists, if there is enough energy to power the system directly. For example, a microphone may send a voltage high enough to directly operate a transmitter. Comparison with push-to-talk Unlike manual push-to-talk ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Transmitter Attack-time Delay
In telecommunications, attack-time delay is the time needed for a receiver or transmitter to respond to an incoming signal. For a receiver, the attack-time delay is defined as the time interval from the instant a step radio-frequency (RF) signal, at a level equal to the receiver's threshold of sensitivity, is applied to the receiver input, to the instant when the receiver's output amplitude reaches 90% of its steady-state value.Federal Standard 1037C If a squelch circuit is operating, the receiver attack-time delay includes the time for the receiver to break squelch. For a transmitter, the attack-time delay is defined as the interval from the instant the transmitter is keyed-on to the instant the transmitted RF signal amplitude has increased to a specified level, usually 90% of its key-on steady-state value. The transmitter attack-time delay excludes the time required for automatic antenna tuning Tuning can refer to: Common uses * Tuning, the process of tuning a tuned am ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Federal Standard 1037C
Federal Standard 1037C, titled Telecommunications: Glossary of Telecommunication Terms, is a United States Federal Standard issued by the General Services Administration pursuant to the Federal Property and Administrative Services Act of 1949, as amended. This document provides federal departments and agencies a comprehensive source of definitions of terms used in telecommunications and directly related fields by international and U.S. government telecommunications specialists. As a publication of the U.S. government, prepared by an agency of the U.S. government, it appears to be mostly available as a public domain resource, but a few items are derived from copyrighted sources: where this is the case, there is an attribution to the source. This standard was superseded in 2001 by American National Standard T1.523-2001, Telecom Glossary 2000, which is published by ATIS. The old standard is still frequently used, because the new standard is protected by copyright, as usual for A ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fall Time
In electronics, fall time (pulse decay time) t_f is the time taken for the amplitude of a pulse to decrease (fall) from a specified value (usually 90% of the peak value exclusive of overshoot or undershoot) to another specified value (usually 10% of the maximum value exclusive of overshoot or undershoot). Limits on undershoot and oscillation (also known as ringing and hunting) are sometimes additionally stated when specifying fall time limits. See also *Rise time *Transition time In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value. These values may be expressed as ratiosSee for example , and . or, equivalen ... References *{{FS1037C MS188 Transient response characteristics ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Overshoot (signal)
In signal processing, control theory, electronics, and mathematics, overshoot is the occurrence of a signal or function exceeding its target. Undershoot is the same phenomenon in the opposite direction. It arises especially in the step response of bandlimited systems such as low-pass filters. It is often followed by ringing, and at times conflated with the latter. Definition Maximum overshoot is defined in Katsuhiko Ogata's ''Discrete-time control systems'' as "the maximum peak value of the response curve measured from the desired response of the system." Control theory In control theory, overshoot refers to an output exceeding its final, steady-state value. For a step input, the ''percentage overshoot'' (PO) is the maximum value minus the step value divided by the step value. In the case of the unit step, the ''overshoot'' is just the maximum value of the step response minus one. Also see the definition of ''overshoot'' in an electronics context. For second-order system ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ADSR Envelope
ADSR may refer to: * ADSR envelope (attack decay sustain release), a common type of music envelope * Accelerator-driven sub-critical reactor, a nuclear reactor using a particle accelerator to generate a fission reaction in a sub-critical assembly of fissionable material * A.D.S.R. Musicwerks, a Seattle, Washington store and US record label that releases Synth Pop and Electro Industrial music *'' Attack Decay Sustain Release'', the debut album from Simian Mobile Disco, released on June 18, 2007 {{disambiguation ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
