Victorian Railways C Class (diesel)
   HOME
*





Victorian Railways C Class (diesel)
The C Class are a class of diesel locomotive built by Clyde Engineering, Rosewater for the Victorian Railways in 1977–1978. History The C class were purchased by the Victorian Railways for heavy freight haulage. They are a variant of the WAGR L class (itself an Australianised EMD SD40) fitted with safety cabs. Initially, the first four were placed on the North East line to haul services from Melbourne to Albury while the latter six were put on the broad gauge to haul services on the Serviceton line. Following upgrades to the infrastructure, they were also able to operate on the Ballarat to Geelong line and from January 1982 through to Adelaide with the standard gauge units transferred to the broad gauge. On 3 August 1979, engines C505 and 506 ran through to Adelaide for the first time as part of a trial of through-running, in place of the previous practice involving changing locomotives at the border. C505 led on the westbound trip with a trailing load of 1,755 tonnes and ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Seymour Railway Heritage Centre
The Seymour Railway Heritage Centre (SRHC) is a railway preservation group based in Seymour, Victoria, Australia. The volunteer non-profit incorporated association was established in 1983 as the Seymour Loco Steam Preservation Group to restore and preserve locomotives and rolling stock as used on the railways of Victoria. The group is an accredited railway operator under the Victorian Rail Safety Act 2006, permitting it to move trains within its own depot. The group is also accredited to maintain and provide rolling stock on the Victorian railway network,V/Line: Network Service Plan - Addenda (5 December 2007) (NA_NSP_03 – R40)
running s,

picture info

Canadian Comfort Cab
The Canadian comfort cab or wide cab or North American Safety Cab is a broad-nosed cab design found on modern North American diesel locomotives, and some export models. It occupies the entire width of the locomotive, and typically has an access door on the front of the nose. The term ''wide cab'' is somewhat of a misnomer because it is the nose, not the cab, that is widened. Development The basic shape of the Canadian comfort cab first appeared on a hood unit, the EMD DDA40X, in 1969. It was the same design as the F45 and FP45 cowl units being built by EMD at the time. The cab used on the DDA40X was not a true Canadian comfort (or "Safety") cab because it consisted mainly of restyled sheet metal and lacked the structural reinforcements of the Canadian design. EMD Design The first true Canadian cabs were designed and built for the Canadian National Railway by input from railway employees. The locomotives were GP38-2s, GP40-2s and GP40-2Ls, and SD40-2s. To denote the pre ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Parkes Railway Station
Parkes railway station is a heritage-listed former locomotive depot and railway station and now locomotive roundhouse and railway station located on the Broken Hill line in May Street, Parkes in the Parkes Shire local government area of New South Wales, Australia. The railway station serves the town of Parkes and was built from 1881 to 1893. It is also known as the Parkes Railway Station group. The property was added to the New South Wales State Heritage Register on 2 April 1999. History A railway Shop Order was issued on 7 December 1912 for the construction of a 'permanent "Rest House" at Parkes (Enginemans or crew barracks). This reference indicates that a "temporary" Rest House or Barracks was provided there much earlier, more likely at or near the time of opening, in the 1898 period. The style of barracks usually provided in the 1890s, up until the early 1900s at many locations in the state, usually consisted of what was known as 'Engine Driver's' and "Guards Accommodation ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Track Gauge Conversion
Gauge conversion is the changing of one railway track gauge (the distance between the running rails) to another. Sleepers If tracks are converted to a narrower gauge, the existing sleepers (ties) may be used. However, replacement is required if the conversion is to a wider gauge. Some sleepers may be long enough to accommodate the fittings of both existing and alternative gauges. Wooden sleepers are suitable for conversion because they can be drilled for the repositioned rail spikes. Being difficult to drill, concrete sleepers are less suitable for conversion. Concrete sleepers may be cast with alternative gauge fittings in place, an example being those used during the conversion of the Melbourne–Adelaide railway from to . Steel sleepers may have alternative gauge fittings cast at production, may be drilled for new fittings or may be welded with new fittings. Structures Conversion from a narrow to a wider gauge may require enlargement of the structure gauge of the bridges, ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


Railway Digest
''Railway Digest'' is a monthly magazine, published in Sydney, covering contemporary railways of Australia. Overview The magazine's publisher is the Australian Railway Historical Society (ARHS), NSW Division. The first issue was published in March 1963 under the name ''New South Wales Digest'' and regular publication commenced with the May 1963 edition. It was renamed in January 1983. In January 1985 it changed paper size from SRA5 to A4. Originally an enthusiast magazine mainly focusing on reporting day-to-day workings of the New South Wales Government Railways and it successors, it was produced by volunteers using a hand-operated duplicator at the home of one of its members. In May 1993, a paid editor was appointed and the magazine's focus gradually shifted to reporting news from across Australia. It has evolved into a professional full-colour production directed at the wider community and commercially distributed to newsagents throughout Australia."Adapt or disappear - the ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Sydney
Sydney ( ) is the capital city of the state of New South Wales, and the most populous city in both Australia and Oceania. Located on Australia's east coast, the metropolis surrounds Sydney Harbour and extends about towards the Blue Mountains to the west, Hawkesbury to the north, the Royal National Park to the south and Macarthur to the south-west. Sydney is made up of 658 suburbs, spread across 33 local government areas. Residents of the city are known as "Sydneysiders". The 2021 census recorded the population of Greater Sydney as 5,231,150, meaning the city is home to approximately 66% of the state's population. Estimated resident population, 30 June 2017. Nicknames of the city include the 'Emerald City' and the 'Harbour City'. Aboriginal Australians have inhabited the Greater Sydney region for at least 30,000 years, and Aboriginal engravings and cultural sites are common throughout Greater Sydney. The traditional custodians of the land on which modern Sydney stands are ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Irish Gauge
Railways with a track gauge of fall within the category of broad gauge railways. , they were extant in Australia, Brazil and Ireland. History 600 BC :The Diolkos (Δίολκος) across the Isthmus of Corinth in Greece – a grooved paved trackway – was constructed with an average gauge of . 1840 : The Grand Duchy of Baden State Railway was constructed in 1840-1851 to gauge before being converted to in 1854–1855. 1843 : The Board of Trade of the United Kingdom of Great Britain and Ireland, after investigating a dispute caused by diverse gauges, recommended the use of in Ireland. 1846 : The Regulating the Gauge of Railways Act 1846 made mandatory throughout all of Ireland. 1847 : The Swiss Northern Railway was opened as a line and converted to in 1854. 1854 : The first Australian railway to operate steam-powered freight and passenger services, Melbourne and Hobson's Bay Railway Company, was built as a line. 1858 : The first Brazilian railway was opened: ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  




Standard Gauge
A standard-gauge railway is a railway with a track gauge of . The standard gauge is also called Stephenson gauge (after George Stephenson), International gauge, UIC gauge, uniform gauge, normal gauge and European gauge in Europe, and SGR in East Africa. It is the most widely used track gauge around the world, with approximately 55% of the lines in the world using it. All high-speed rail lines use standard gauge except those in Russia, Finland, and Uzbekistan. The distance between the inside edges of the rails is defined to be 1435 mm except in the United States and on some heritage British lines, where it is defined in U.S. customary/Imperial units as exactly "four feet eight and one half inches" which is equivalent to 1435.1mm. History As railways developed and expanded, one of the key issues was the track gauge (the distance, or width, between the inner sides of the rails) to be used. Different railways used different gauges, and where rails of different gauge met – ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Adelaide
Adelaide ( ) is the capital city of South Australia, the state's largest city and the fifth-most populous city in Australia. "Adelaide" may refer to either Greater Adelaide (including the Adelaide Hills) or the Adelaide city centre. The demonym ''Adelaidean'' is used to denote the city and the residents of Adelaide. The Traditional Owners of the Adelaide region are the Kaurna people. The area of the city centre and surrounding parklands is called ' in the Kaurna language. Adelaide is situated on the Adelaide Plains north of the Fleurieu Peninsula, between the Gulf St Vincent in the west and the Mount Lofty Ranges in the east. Its metropolitan area extends from the coast to the foothills of the Mount Lofty Ranges, and stretches from Gawler in the north to Sellicks Beach in the south. Named in honour of Queen Adelaide, the city was founded in 1836 as the planned capital for the only freely-settled British province in Australia. Colonel William Light, one of Adelaide's foun ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]  


picture info

Serviceton Railway Line
The Serviceton railway line (also known in Victoria, Australia as the Western line) is part of the Melbourne–Adelaide rail corridor. It serves the west of Victoria, linking the state capital of Melbourne to the cities of Ballarat and Ararat. It once extended to the disputed South Australian border as part of the Melbourne–Adelaide railway. The former broad-gauge () track was replaced in 1995 by the Western standard gauge line. Services Metro Trains Melbourne operates suburban passenger train services along the inner section of the line as far as Sunshine on the Sunbury Line, while V/Line services operate as the Interurban Ballarat Line and the Intercity Ararat Line. During peak hour some services originate and terminate at Bacchus Marsh. Passengers on the inner section of the line to Melton are permitted to use Myki tickets to access the services, with this section marked as the Melton line on suburban network maps. Beyond Ararat the line is part of the Western stan ...
[...More Info...]      
[...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]