|
Sulzer ZG9
Sulzer ZG9 was a pre-World War II opposed-piston two-stroke diesel engine by Sulzer. The engine was available with a choice of two, three and four cylinders (2ZG9, 3ZG9, 4ZG9); the two-cylinder version developed 120 bhp. It used a piston scavenge pump. This was mounted vertically above one rocker, driven by a bellcrank from the main rockers. This engine is sometimes cited as an inspiration for the Commer TS3 design. Specification See also * Arrol-Johnston - 1905 opposed piston petrol engine * Commer TS3 * Junkers Jumo 204 - an opposed-piston aircraft engine of the 1930s * Napier Deltic The Napier Deltic engine is a British opposed-piston valveless, supercharged uniflow scavenged, two-stroke diesel engine used in marine and locomotive applications, designed and produced by D. Napier & Son. Unusually, the cylinders were disp ... - large multi-bank engine, with crankshafts shared between cylinder banks. References {{reflist, colwidth=30em Opposed piston engine ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Opposed-piston Engine
An opposed-piston engine is a piston engine in which each cylinder has a piston at both ends, and no cylinder head. Petrol and diesel opposed-piston engines have been used mostly in large-scale applications such as ships, military tanks, and factories. Current manufacturers of opposed-piston engines include Fairbanks-Morse, Cummins and Achates Power. Design Compared to contemporary two-stroke engines, which used a conventional design of one piston per cylinder, the advantages of the opposed-piston engine have been recognized as: * Eliminating the cylinder head and valvetrain, which reduces weight, complexity, cost, heat loss, and friction loss of the engine. * Creating a uniflow-scavenged movement of gas through the combustion chamber, which avoided the drawbacks associated with the contemporary crossflow-scavenged designs (however later advancements have provided methods for achieving uniflow scavenging in conventional piston engine designs). * A reduced height of the e ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Two-stroke Diesel Engine
A two-stroke diesel engine is an internal combustion engine that uses compression ignition, with a two-stroke combustion cycle. It was invented by Hugo Güldner in 1899.Mau (1984) p.7 In compression ignition, air is first compressed and heated; fuel is then injected into the cylinder, causing it to self-ignite. The two-stroke cycle ignites the fuel to deliver a power stroke each time the piston rises and falls in the cylinder, without any need for the additional exhaust and induction strokes of the four-stroke cycle. History According to the designer of the first operational diesel engine, Imanuel Lauster, Rudolf Diesel did not originally intend using the two-stroke principle for the diesel engine. Hugo Güldner designed what is believed to be the first operational two-stroke diesel engine in 1899, and he convinced MAN, Krupp and Diesel to fund building this engine with ℳ 10,000 each. Güldner's engine had a 175 mm work cylinder, and a 185 mm scavenging cylinder ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sulzer (manufacturer)
Sulzer Ltd. is a Swiss industrial engineering and manufacturing firm, founded by Salomon Sulzer-Bernet in 1775 and established as Sulzer Brothers Ltd. (Gebrüder Sulzer) in 1834 in Winterthur, Switzerland. Today it is a publicly traded company with about 180 manufacturing facilities and service centers around the world. The company's shares are listed on the Swiss Stock Exchange. Sulzer is a global leader in fluid engineering. The company specializes in pumping, agitation, mixing, separation and purification technologies for fluids of all types. Sulzer provides new equipment for large infrastructure across various markets, among others water and wastewater, energy, chemicals, renewables and industrial processes. The service business makes up half of the company's sales. A growing part of the business are renewable applications such as biopolymers, recycling and low-carbon solutions. In its almost 200-year history, the company has gained international recognition with invention ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Caxton Publishing Company Ltd
Caxton may refer to: Places * Caxton Street, Brisbane, Australia * Caxton, Cambridgeshire, a village in Cambridgeshire, UK ** Caxton Gibbet, a knoll near the village * Caxton Hall, a historic building in London, UK * Caxton Building, a historic building in Cleveland, Ohio, US * Saint-Élie-de-Caxton, Quebec, Canada Publishers * Caxton Press (New Zealand) * Caxton and CTP Publishers and Printers, a publisher in South Africa * Caxton Press (United Kingdom) * Caxton Press (United States) Other uses * Caxton Associates, an American investment firm * Caxton Club, an American social club in Chicago, Illinois, US * Caxton College, a private school in Valencia, Spain * ''The Caxtons'', a novel by Edward Bulwer-Lytton * William Henry Rhodes or Caxton, American attorney * William Caxton, an English printer, credited as being the first person to introduce the printing press to England in the 1470s See also *Caxton Press (other) Caxton Press may refer to: *Caxton Press (New Z ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Scavenging (automotive)
Scavenging is the process of replacing the exhaust gas in a cylinder of an internal combustion engine with the fresh air/fuel mixture (or fresh air, in the case of direct-injection engines) for the next cycle. If scavenging is incomplete, the remaining exhaust gases can cause improper combustion for the next cycle, leading to reduced power output. Scavenging is equally important for both two-stroke and four-stroke engines. Most modern four-stroke engines use crossflow cylinder heads and valve timing overlap to scavenge the cylinders. Modern two-stroke engines use either Schnuerle scavenging (also known as "loop scavenging") or uniflow scavenging. The scavenge or scavenging port refers to that port through which clean air enters the cylinder, the exhaust port through which it leaves. Origins The first engines deliberately designed to encourage scavenging were gas engines built by Crossley Brothers Ltd in the United Kingdom in the early 1890s. These ''Crossley Otto Scavengin ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Commer TS3
The Commer TS3 was a diesel engine fitted in Commer trucks built by the Rootes Group in the 1950s and 1960s. It was the first diesel engine used by the company. Development Rootes' intention for the engine was for it to fit under the QX "cab forward" design fitted to the R7 7ton truck released in 1948. This very advanced design had been built with the engine under the seat to allow three men to fit comfortably across the cab. The petrol version used a development of the Humber Super Snipe engine, lying at a 66 degree angle, and the opposed piston design of the TS3 was used so that it would fit in the same space. It is often thought that "TS" in the engine's name derives from its Tilling-Stevens origins, a company acquired by Rootes in 1950 but this is incorrect. It stands for Two-stroke. Development of the engine started at the Humber plant at Stoke Aldermoor some four years before Rootes had acquired Tilling-Stevens. The small design team headed by Chief Engineer Eric Coy, began w ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Arrol-Johnston
Arrol-Johnston (later known as Arrol-Aster) was an early Scottish manufacturer of automobiles, which operated from 1895 to 1931 and produced the first automobile manufactured in Britain. The company also developed the world's first "off-road" vehicle for the Egyptian government, and another designed to travel on ice and snow for Ernest Shackleton's Nimrod Expedition to the South Pole. History George Johnston was by training a locomotive engineer from Neilson, Reid and Company Limited of Springburn, Glasgow. Johnston was commissioned by Glasgow Corporation Tramways in 1894 to build an experimental steam-powered tramcar to replace their fleet of horse-drawn trams. During a final test before a Corporation committee, it caught fire and work was abandoned. Johnston's attention was then turned to a detailed examination of continental makes of motor cars and he came to the conclusion that he could design and make a better vehicle than any of them and, in particular, a better engine. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Junkers Jumo 204
The Jumo 204 was an opposed-piston, inline, liquid-cooled 6-cylinder aircraft Diesel engine produced by the German manufacturer Junkers. It entered service in 1932. Later engines in the series, the Jumo 205, Jumo 206, Jumo 207 and Jumo 208, differed in stroke, bore, and supercharging arrangements. Design and development Development of the Junkers diesel engines started in the 1920s with the Junkers Fo3 and Junkers Fo4/Junkers SL1. The Fo4 was re-designated Junkers 4, which in turn was re-designated Junkers Jumo 204 by the Reichsluftfahrtministerium (RLM), where the first number indicates the manufacturer; 2 – Junkers Motoren. These engines used a two-stroke cycle with six cylinders and twelve pistons, in an opposed piston configuration with two crankshafts, one at the bottom of the cylinder block and the other at the top, geared together. The pistons moved towards each other during the operating cycle. There were two cam-operated injection pumps per cylinder, each feeding two n ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Napier Deltic
The Napier Deltic engine is a British opposed-piston valveless, supercharged uniflow scavenged, two-stroke diesel engine used in marine and locomotive applications, designed and produced by D. Napier & Son. Unusually, the cylinders were disposed in a three-bank triangle, with a crankshaft at each corner of the triangle. The term Deltic (meaning "in the form of the Greek letter (capital) delta") is used to refer to both the Deltic E.130 opposed-piston, high-speed diesel engine and the locomotives produced by English Electric using these engines, including its demonstrator locomotive named ''DELTIC'' and the production version for British Railways, which designated these as (TOPS) Class 55. A single, half-sized, turbocharged Deltic power unit also featured in the English Electric-built Type 2 locomotive, designated as the Class 23. Both locomotive and engine became better known as the "Baby Deltic". History and design The Deltic story began in 1943 when the British Admiral ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Two-stroke Diesel Engines
A two-stroke (or two-stroke cycle) engine is a type of internal combustion engine that completes a power cycle with two strokes (up and down movements) of the piston during one power cycle, this power cycle being completed in one revolution of the crankshaft. A four-stroke engine requires four strokes of the piston to complete a power cycle during two crankshaft revolutions. In a two-stroke engine, the end of the combustion stroke and the beginning of the compression stroke happen simultaneously, with the intake and exhaust (or scavenging) functions occurring at the same time. Two-stroke engines often have a high power-to-weight ratio, power being available in a narrow range of rotational speeds called the power band. Two-stroke engines have fewer moving parts than four-stroke engines. History The first commercial two-stroke engine involving cylinder compression is attributed to Scottish engineer Dugald Clerk, who patented his design in 1881. However, unlike most later two-st ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
