|
Steiner Tunnel Test
The Steiner tunnel test is a widely used method of testing building interior wall and ceiling finishes for their ability to support and propagate fire, and for their tendency to emit smoke. The test was developed in 1944 by Al Steiner of Underwriters Laboratories, and has been incorporated as a reference into North American standards for materials testing as tests ASTME84, NFPA255, UL723 and ULCS102. These standards are in widespread use for the regulation and selection of materials for interior building construction throughout North America. The test may be carried out inside a dedicated, instrumented test apparatus. The test itself involves an assembly of the tested material, fabricated into an otherwise noncombustible horizontal box or tunnel as the tunnel's roof, in a section long and wide. The tunnel is as wide and long as the test specimen, and high. The apparatus is equipped with two gas burners providing a flame intensity of 89 kilowatts, and air and combustion product ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Smoke
Smoke is a suspension of airborne particulates and gases emitted when a material undergoes combustion or pyrolysis, together with the quantity of air that is entrained or otherwise mixed into the mass. It is commonly an unwanted by-product of fires (including stoves, candles, internal combustion engines, oil lamps, and fireplaces), but may also be used for pest control ( fumigation), communication ( smoke signals), defensive and offensive capabilities in the military (smoke screen), cooking, or smoking (tobacco, cannabis, etc.). It is used in rituals where incense, sage, or resin is burned to produce a smell for spiritual or magical purposes. It can also be a flavoring agent and preservative. Smoke inhalation is the primary cause of death in victims of indoor fires. The smoke kills by a combination of thermal damage, poisoning and pulmonary irritation caused by carbon monoxide, hydrogen cyanide and other combustion products. Smoke is an aerosol (or mist) of solid particl ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Underwriters Laboratories
The UL enterprise is a global safety science company headquartered in Northbrook, Illinois, composed of three organizations, UL Research Institutes, UL Standards & Engagement and UL Solutions. Established in 1894, the UL enterprise was founded as the Underwriters' Electrical Bureau (a bureau of the National Board of Fire Underwriters), and was known throughout the 20th century as Underwriters Laboratories. On January 1, 2012, Underwriters Laboratories became the parent company of a for-profit company in the U.S named UL LLC, a limited liability corporation, which took over the product testing and certification business. On June 26, 2022, the companies rebranded into three distinct organizations that make up the UL enterprise. UL Solutions partners with customers and stakeholders in more than 100 countries to help solve safety, security and sustainability challenges and is also responsible for managing and issuing the highly respected portfolio of UL Marks. The company is one of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ASTM
ASTM International, formerly known as American Society for Testing and Materials, is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services. Some 12,575 ASTM voluntary consensus standards operate globally. The organization's headquarters is in West Conshohocken, Pennsylvania, about northwest of Philadelphia. It is founded in 1902 as the American Section of the International Association for Testing Materials (see also International Organization for Standardization). History A group of scientists and engineers, led by Charles Dudley, formed ASTM in 1898 to address the frequent rail breaks affecting the fast-growing railroad industry. The group developed a standard for the steel used to fabricate rails. Originally called the "American Society for Testing Materials" in 1902, it became the "American Society for Testing And Materials" in 1961. In 2001, ASTM official ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
National Fire Protection Association
The National Fire Protection Association (NFPA) is an international nonprofit organization devoted to eliminating death, injury, property and economic loss due to fire, electrical and related hazards. As of 2018, the NFPA claims to have 50,000 members and 9,000 volunteers working with the organization through its 250 technical committees. History In 1895, a Committee on Automatic Sprinkler Protection was formed in Massachusetts by men affiliated with several fire insurance companies and a pipe manufacturer to develop a uniform standard for the design and installation of fire sprinkler systems. At the time, there were nine such standards in effect within of Boston, Massachusetts, and such diversity was causing great difficulties for plumbers working in the New England region. The next year, the committee published its initial report on a uniform standard, and went on to form the NFPA in late 1896. The committee's initial report evolved into NFPA 13, ''Standard for the Installat ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Flame Spread
A flame (from Latin ''flamma'') is the visible, gaseous part of a fire. It is caused by a highly exothermic chemical reaction taking place in a thin zone. When flames are hot enough to have ionized gaseous components of sufficient density they are then considered plasma. Mechanism Color and temperature of a flame are dependent on the type of fuel involved in the combustion, as, for example, when a lighter is held to a candle. The applied heat causes the fuel molecules in the candle wax to vaporize (if this process happens in inert atmosphere without oxidizer, it is called pyrolysis). In this state they can then readily react with oxygen in the air, which gives off enough heat in the subsequent exothermic reaction to vaporize yet more fuel, thus sustaining a consistent flame. The high temperature of the flame causes the vaporized fuel molecules to decompose, forming various incomplete combustion products and free radicals, and these products then react with each other and with th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Smoke-developed Index
Smoke-developed index (abbreviated SDI) is a measure of the concentration of smoke a material emits as it burns. Like the Flame Spread Index, it is based on an arbitrary scale in which asbestos-cement board has a value of 0, and red oak wood has 100. The SDI is measured using a horizontal test specimen, according to the Steiner tunnel test protocol. The ASTM standard E84 defines a standard test method for surface flame spread and smoke density measurements. A smoke-developed index of less than 450 is required by IBC section 803.1 at interior walls and ceilings for all surface materials except trim. See also *Steiner tunnel test *Limiting oxygen index The limiting oxygen index (LOI) is the minimum concentration of oxygen, expressed as a percentage, that will support combustion of a polymer. It is measured by passing a mixture of oxygen and nitrogen over a burning specimen, and reducing the oxygen ... References {{reflist Fire test standards ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Asbestos-cement
Asbestos cement, genericized as fibro, fibrolite (short for "fibrous (or fibre) cement sheet") or AC sheet, is a building material in which asbestos fibres are used to reinforce thin rigid cement sheets. Although invented at the end of the 19th century, the material was adopted extensively during World War II to make easily-built, sturdy and inexpensive structures for military purposes, and it continued to be used widely following the war as an affordable external cladding for buildings. Advertised as a fireproof alternative to other roofing materials such as asphalt, asbestos-cement roofs were popular, not only for safety but also for affordability. Due to asbestos-cement's imitation of more expensive materials such as wood siding and shingles, brick, slate, and stone, the product was marketed as an affordable renovation material. Asbestos-cement faced competition with the aluminum alloy, available in large quantities after WWII, and the reemergence of wood clapboard and vinyl ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Erythrobalanus
The genus Oak, ''Quercus'' contains about 500 species, some of which are listed here. The genus, as is the case with many List of the largest genera of flowering plants, large genera, is Taxonomic rank#Ranks in botany, divided into subgenus, subgenera and Section (botany), sections. Traditionally, the genus ''Quercus'' was divided into the two subgenera ''Cyclobalanopsis'', the ring-cupped oaks, and ''Quercus'', which included all the other sections. However, a comprehensive revision in 2017 identified different relationships. Now the genus is commonly divided into a subgenus ''Quercus'' and a sugenus ''Cerris'', with ''Cyclobalanopsis'' included in the latter. The sections of subgenus ''Quercus'' are mostly native to the New World, with the notable exception of the white oaks of sect. ''Quercus'' and the endemic Quercus pontica. In contrast, the sections of the subgenus ''Cerris'' are exclusively native to the Old World. Legend Species with evergreen foliage ("live oaks") are tagge ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hexamine Fuel Tablet
A hexamine fuel tablet (or heat tablet, Esbit) is a form of solid fuel in tablet form. The tablets burn smokelessly, have a high energy density, do not liquefy while burning and leave no ashes. Invented in Murrhardt, Germany, in 1936, the main component is hexamine, which was discovered by Aleksandr Butlerov in 1859. Some fuel tablets use 1,3,5-trioxane as another ingredient. ''Esbit'' is a genericized trademark that people often use to refer to similar products made by other companies. In most countries from the former Soviet bloc, fuel tablets are called ''dry alcohol''. Uses The tablets are used for cooking by campers, the military and relief organizations. They are often used with disposable metal stoves that are included with field ration packs. An Esbit beverage-can stove can be made by cutting off the bottom of an aluminium soft drink can, and turning it upside down to support the fuel tablet. A pot can be supported above this with a circle of chicken wire or metal ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Flammability
A combustible material is something that can burn (i.e., ''combust'') in air. A combustible material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame. The degree of flammability or combustibility in air depends largely upon the volatility of the material - this is related to its composition-specific vapour pressure, which is temperature dependent. The quantity of vapour produced can be enhanced by increasing the surface area of the material forming a mist or dust. Take wood as an example. Finely divided wood dust can undergo explosive combustion and produce a blast wave. A piece of paper (made from wood) catches on fire quite easily. A heavy oak desk is much harder to ignite, even though the wood fibre is the same in all three materials. Common sense (and indeed scientific consensus until the mid-1700s) would seem to suggest that ma ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fire Test
A fire test is a means of determining whether fire protection products meet minimum performance criteria as set out in a building code or other applicable legislation. Successful tests in laboratories holding national accreditation for testing and certification result in the issuance of a certification listing. Components and systems subject to certification fire testing include fire rated walls and floors, closures within them such as windows, fire doors, fire dampers, structural steel, and fire stops. Fire tests are conducted both on active fire protection and on passive fire protection items. There are full-scale, small-scale and bench-scale tests. Fire testing considers all applicable provisions of the product certification. Examples of fire testing for products and systems * ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials, also known as the Steiner tunnel test * ASTM E1354 Standard Test Method for Heat and Visible Smoke Release Ra ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Fire-safe Polymers
Fire-safe polymers are polymers that are resistant to degradation at high temperatures. There is need for fire-resistant polymers in the construction of small, enclosed spaces such as skyscrapers, boats, and airplane cabins.Zhang, H. ''Fire-Safe Polymers and Polymer Composites,'' Federal Aviation Administration technical report; U.S. Department of Transportation: Washington, D.C., 2004. In these tight spaces, ability to escape in the event of a fire is compromised, increasing fire risk. In fact, some studies report that about 20% of victims of airplane crashes are killed not by the crash itself but by ensuing fires.Sarkos, C. P. The Effect of Cabin Materials on Aircraft Postcrash Fire Survivability. ''Technical Papers of the Annual Technical Conference'' 1996, ''54'' (3), 3068-3071. Fire-safe polymers also find application as adhesives in aerospace materials,Kumar, D.; Gupta, A. D.; Khullar, M. Heat-resistant thermosetting polymers based on a novel tetrakisaminophenoxycyclotriphospha ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
