|
Short Interframe Space
Short Interframe Space (SIFS), is the amount of time in microseconds required for a wireless interface to process a received frame and to respond with a response frame. It is the difference in time between the first symbol of the response frame in the air and the last symbol of the received frame in the air. A SIFS time consists of the delay in receiver RF, PLCP delay and the MAC processing delay, which depends on the physical layer used. In IEEE 802.11 networks, SIFS is the interframe spacing prior to transmission of an acknowledgment, a Clear To Send (CTS) frame, a block ack frame that is an immediate response to either a block ack request frame or an A-MPDU, the second or subsequent MPDU of a fragment burst, a station responding to any polling a by point coordination function and during contention free periods of point coordination function. Implications for Software Radio Because most Software-Defined Radios use a host computer for processing, the SIFS impose ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Extended Interframe Space
Extended Interframe space (EIFS) is used in IEEE 802.11 based WLANs. If a previously received frame contains an error then a station has to defer EIFS duration instead of DIFS before transmitting a frame. This is because, although this station was not able to decode the frame, it could be that the intended receiver could decode the frame. It should have the opportunity to return an Acknowledgment frame; the EIFS ensures the transmission of the Ack can proceed without interference from those not able to decode the frame. This duration is calculated by the below method. EIFS = Transmission time of Ack frame at lowest phy mandatory rate + SIFS + DIFS See also * DIFS * RIFS * SIFS References {{reflist E ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Block Acknowledgement
Block acknowledgement (BA) was initially defined in IEEE 802.11e as an optional scheme to improve the MAC efficiency. 802.11n amendment ratified in 2009 enhances this BA mechanism then made it as mandatory to support by all 802.11n-capable devices (formally known as HT - High Throughput devices). Instead of transmitting an individual ACK for every MPDU (i.e., frame A frame is often a structural system that supports other components of a physical construction and/or steel frame that limits the construction's extent. Frame and FRAME may also refer to: Physical objects In building construction *Framing (con ...), multiple MPDUs can be acknowledged together using a single BA frame. Block Ack (BA) contains bitmap size of 64*16 bits. These 16 bits accounts the fragment number of the MPDUs to be acknowledged. Each bit of this bitmap represent the status (success/failure) of a MPDU. Block acknowledgement consist of a setup and tear-down of the session phases. In the setup phase, c ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
PCF Interframe Space
Point coordination function (PCF) is a media access control (MAC) technique used in IEEE 802.11 based WLANs, including Wi-Fi. It resides in a point coordinator also known as access point (AP), to coordinate the communication within the network. The AP waits for PIFS duration rather than DIFS duration to grasp the channel. PIFS is less than DIFS duration and hence the point coordinator always has the priority to access the channel. The PCF is located directly above the distributed coordination function (DCF), in the IEEE 802.11 MAC Architecture. Channel access in PCF mode is centralized and hence the point coordinator sends CF-Poll frame to the PCF capable station to permit it to transmit a frame. In case the polled station does not have any frames to send, then it must transmit null frame. Due to the priority of PCF over DCF, stations that only use DCF might not gain access to the medium. To prevent this, a repetition interval has been designed to cover both (Contention free) PC ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Point Coordination Function
Point coordination function (PCF) is a media access control (MAC) technique used in IEEE 802.11 based WLANs, including Wi-Fi. It resides in a point coordinator also known as access point (AP), to coordinate the communication within the network. The AP waits for PIFS duration rather than DIFS duration to grasp the channel. PIFS is less than DIFS duration and hence the point coordinator always has the priority to access the channel. The PCF is located directly above the distributed coordination function (DCF), in the IEEE 802.11 MAC Architecture. Channel access in PCF mode is centralized and hence the point coordinator sends CF-Poll frame to the PCF capable station to permit it to transmit a frame. In case the polled station does not have any frames to send, then it must transmit null frame. Due to the priority of PCF over DCF, stations that only use DCF might not gain access to the medium. To prevent this, a repetition interval has been designed to cover both (Contention free) PC ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Reduced Interframe Space
Reduced Interframe Space (RIFS) is one of the new features introduced in IEEE 802.11n to improve its efficiency. RIFS is the time in micro seconds by which the multiple transmissions from a single station are separated. RIFS is used when no SIFS separated response frames are expected from the receiver. The value of RIFS is 2μs for 802.11n phy. The use of RIFS is obsolete from 802.11ac amendment onwards. An 802.11ac station will not transmit frames separated by RIFS. So a 11ac station operating in HT mode sets the RIFS mode field in HT operation element to 0. See also * SIFS - Short Interframe Space * PIFS - PCF Interframe Space * DIFS - DCF Interframe Space * AIFS - Arbitration Interframe Space * PCF - Point Coordination Function Point coordination function (PCF) is a media access control (MAC) technique used in IEEE 802.11 based WLANs, including Wi-Fi. It resides in a point coordinator also known as access point (AP), to coordinate the communication within the network. .. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
DCF Interframe Space
The IEEE 802.11 family of standards describe the DCF protocol, which controls access to the physical medium. A station must sense the status of the wireless medium before transmitting. If it finds that the medium is continuously idle for DCF Interframe Space (DIFS) duration, it is then permitted to transmit a frame. If the channel is found busy during the DIFS interval, the station should defer its transmission. DIFS duration can be calculated by the following method. DIFS = SIFS + (2 * Slot time) , 2016, Equation (10-6), page 1332. IEEE 802.11g is backward compatible with IEEE 802.11b IEEE 802.11b-1999 or 802.11b is an amendment to the IEEE 802.11 wireless networking specification that extends throughput up to 11 Mbit/s using the same 2.4 GHz band. A related amendment was incorporated into the IEEE 802.11-2007 standard. .... When these devices are associated with same AP all the timing parameters are changed to 802.11b. See also * SIFS * PIFS * AIFS * RIF ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
IEEE 802
IEEE 802 is a family of Institute of Electrical and Electronics Engineers (IEEE) standards for local area networks (LAN), personal area network (PAN), and metropolitan area networks (MAN). The IEEE 802 LAN/MAN Standards Committee (LMSC) maintains these standards. The IEEE 802 family of standards has had twenty-four members, numbered 802.1 through 802.24, with a working group of the LMSC devoted to each. However, not all of these working groups are currently active. The IEEE 802 standards are restricted to computer networks carrying variable-size packets, unlike cell relay networks, for example, in which data is transmitted in short, uniformly sized units called cells. Isochronous signal networks, in which data is transmitted as a steady stream of octets, or groups of octets, at regular time intervals, are also outside the scope of the IEEE 802 standards. The number 802 has no significance: it was simply the next number in the sequence that the IEEE used for standards projects. Th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Point Coordination Function
Point coordination function (PCF) is a media access control (MAC) technique used in IEEE 802.11 based WLANs, including Wi-Fi. It resides in a point coordinator also known as access point (AP), to coordinate the communication within the network. The AP waits for PIFS duration rather than DIFS duration to grasp the channel. PIFS is less than DIFS duration and hence the point coordinator always has the priority to access the channel. The PCF is located directly above the distributed coordination function (DCF), in the IEEE 802.11 MAC Architecture. Channel access in PCF mode is centralized and hence the point coordinator sends CF-Poll frame to the PCF capable station to permit it to transmit a frame. In case the polled station does not have any frames to send, then it must transmit null frame. Due to the priority of PCF over DCF, stations that only use DCF might not gain access to the medium. To prevent this, a repetition interval has been designed to cover both (Contention free) PC ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
MPDU
In telecommunications, a protocol data unit (PDU) is a single unit of information transmitted among peer entities of a computer network. It is composed of protocol-specific control information and user data. In the layered architectures of communication protocol stacks, each layer implements protocols tailored to the specific type or mode of data exchange. For example, the Transmission Control Protocol (TCP) implements a connection-oriented transfer mode, and the PDU of this protocol is called a ''segment'', while the User Datagram Protocol (UDP) uses datagrams as protocol data units for connectionless communication. A layer lower in the Internet protocol suite, at the Internet layer, the PDU is called a packet, irrespective of its payload type. Packet-switched data networks In the context of packet switching data networks, a protocol data unit (PDU) is best understood in relation to a service data unit (SDU). The features or services of the network are implemented in disti ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Microsecond
A microsecond is a unit of time in the International System of Units (SI) equal to one millionth (0.000001 or 10−6 or ) of a second. Its symbol is μs, sometimes simplified to us when Unicode is not available. A microsecond is equal to 1000 nanoseconds or of a millisecond. Because the next SI prefix is 1000 times larger, measurements of 10−5 and 10−4 seconds are typically expressed as tens or hundreds of microseconds. Examples * 1 microsecond (1 μs) – cycle time for frequency (1 MHz), the inverse unit. This corresponds to radio wavelength 300 m (AM medium wave band), as can be calculated by multiplying 1 μs by the speed of light (approximately ). * 1 microsecond – the length of time of a high-speed, commercial strobe light flash (see air-gap flash). * 1 microsecond – protein folding takes place on the order of microseconds. * 1.8 microseconds – the amount of time subtracted from the Earth's day as a result of the 2011 Japanese earthquake. * 2 m ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Wireless Network Interface Controller
A wireless network interface controller (WNIC) is a network interface controller which connects to a wireless network, such as Wi-Fi or Bluetooth, rather than a wired network, such as a Token Ring or Ethernet. A WNIC, just like other NICs, works on the layers 1 and 2 of the OSI model and uses an antenna to communicate via radio waves. A wireless network interface controller may be implemented as an expansion card and connected using PCI bus or PCIe bus, or connected via USB, PC Card, ExpressCard, Mini PCIe or M.2. The low cost and ubiquity of the Wi-Fi standard means that many newer mobile computers have a wireless network interface built into the motherboard. The term is usually applied to IEEE 802.11 adapters; it may also apply to a NIC using protocols other than 802.11, such as one implementing Bluetooth connections. Modes of operation An 802.11 WNIC can operate in two modes known as ''infrastructure mode'' and ''ad hoc mode'': ; Infrastructure mode : In an infras ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Interpacket Gap
In computer networking, the interpacket gap (IPG), also known as interframe spacing, or interframe gap (IFG), is a pause which may be required between network packets or network frames. Depending on the physical layer protocol or encoding used, the pause may be necessary to allow for receiver clock recovery, permitting the receiver to prepare for another packet (e.g. powering up from a low-power state) or another purpose. It may be considered as a specific case of a guard interval. Ethernet Ethernet devices must allow a minimum idle period between transmission of Ethernet packets. A brief recovery time between packets allows devices to prepare for reception of the next packet. While some physical layer variants literally transmit nothing during the idle period, most modern ones continue to transmit an idle pattern signal. The standard minimum interpacket gap for transmission is 96 bit times (the time it takes to transmit 96 bits of data on the medium). The time is measured from ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
