|
GN M-1
The Great Northern Railway M-1 was a class of 35 American 2-6-8-0 locomotives introduced in 1910. A total of 35 of these Mallet locomotives were built by Baldwin Locomotive Works in two batches; the first 10 in December 1909, followed by a further 25 in June to August 1910. They were early articulateds and worked their entire life on the Great Northern Railway (U.S.), Great Northern Railway (GN). These engines were unusual because of having two uneven sets of driving wheels; the front set having six driving wheels, and the rear set having eight driving wheels. All M-1's were converted to be simple-expansion cylinders from 1926 to 1927 and reclassified M-2. Twenty-two of the M-2's were dismantled between 1929 and 1931, with parts being recycled into new class O-7 2-8-2, Mikados numbered 3376-3396 in 1930 . Three O7 Mikado's were rebuilt to O8 Mikados numbered 3397-3399 in 1932 . The 13 M-2's not rebuilt lasted until the dieselisation era, and were sold for scrap between 1949 and 19 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Baldwin Locomotive Works
The Baldwin Locomotive Works (BLW) was an American manufacturer of railroad locomotives from 1825 to 1951. Originally located in Philadelphia, it moved to nearby Eddystone, Pennsylvania, in the early 20th century. The company was for decades the world's largest producer of steam locomotives, but struggled to compete as demand switched to diesel locomotives. Baldwin produced the last of its 70,000-plus locomotives in 1951, before merging with the Lima-Hamilton Corporation on September 11, 1951, to form the Baldwin-Lima-Hamilton Corporation. The company has no relation to the E.M. Baldwin and Sons of New South Wales, Australia, a builder of small diesel locomotives for sugar cane railroads. History: 19th century Beginning The Baldwin Locomotive Works had a humble beginning. Matthias W. Baldwin, the founder, was a jeweler and whitesmith, who, in 1825, formed a partnership with machinist David H. Mason, and engaged in the manufacture of bookbinders' tools and cylinders for cal ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
2-6-8-0
A 2-6-8-0 steam locomotive, in the Whyte notation for describing locomotive wheel arrangements, has two leading wheels, a set of six driving wheels, a set of eight driving wheels, and no trailing wheels. These locomotives usually employ the Mallet principle of articulation, with a swinging front engine and a rigidly attached rear engine. Equivalent classifications Other equivalent classifications are: UIC classification: 1CD (also known as German classification and Italian classification) French classification: 130+040 Turkish classification: 34+44 Swiss classification: 3/4+4/4 The UIC classification is refined to (1'C)D for Mallet locomotives. Examples This type of articulated locomotive is unusual in having different numbers of driving axles in each set, and was only found in the United States of America and Germany. The Great Northern Railway and the Alabama Great Southern, a predecessor of the Southern Railway, both in the United States, were the sole long-term users o ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Great Northern Railway (U
Great Northern Railway or Great Northern Railroad may refer to: Australia *Great Northern Railway (Queensland) in Australia *Great Northern Rail Services in Victoria, Australia *Central Australia Railway was known as the great Northern Railway in the 1890s in South Australia *Main North railway line, New South Wales (Australia) Canada *Great Northern Railway of Canada Ireland *Great Northern Railway (Ireland) New Zealand *Kingston Branch (New Zealand) in Southland *Main North Line, New Zealand and Waiau Branch in Canterbury United Kingdom *Great Northern Railway (Great Britain) **Thameslink and Great Northern, a current operator of trains on this route United States *Great Northern Railway (U.S.), now part of the BNSF Railway system *International – Great Northern Railroad in Texas, U.S., now part of the Union Pacific Railroad *New Orleans, Jackson and Great Northern The New Orleans, Jackson and Great Northern was a gauge railway originally commissioned by the St ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Mallet Locomotive
The Mallet locomotive is a type of articulated steam railway locomotive, invented by the Swiss engineer Anatole Mallet (1837–1919). The front of the locomotive articulated on a bogie. The compound steam system fed steam at boiler pressure to high-pressure cylinders driving the rear set of driving wheels (rigidly connected to the boiler). The exhaust steam from these cylinders was fed into a low-pressure receiver and was then sent to low-pressure cylinders that powered the driving wheels on the swiveling bogie towards the front of locomotive. Compounding Steam under pressure is converted into mechanical energy more efficiently if it is used in a compound engine; in such an engine steam from a boiler is used in high-pressure (HP) cylinders and then under reduced pressure in a second set of cylinders. The lower-pressure steam occupies a larger volume and the low-pressure (LP) cylinders are larger than the high-pressure cylinders. A third stage (triple expansion) may be empl ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Driving Wheels
On a steam locomotive, a driving wheel is a powered wheel which is driven by the locomotive's pistons (or turbine, in the case of a steam turbine locomotive). On a conventional, non-articulated locomotive, the driving wheels are all coupled together with side rods (also known as coupling rods); normally one pair is directly driven by the main rod (or connecting rod) which is connected to the end of the piston rod; power is transmitted to the others through the side rods. On diesel and electric locomotives, the driving wheels may be directly driven by the traction motors. Coupling rods are not usually used, and it is quite common for each axle to have its own motor. Jackshaft drive and coupling rods were used in the past (e.g. in the Swiss Crocodile locomotive) but their use is now confined to shunting locomotives. On an articulated locomotive or a duplex locomotive, driving wheels are grouped into sets which are linked together within the set. Diameter Driving wheels are ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
2-8-2
Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles and two trailing wheels on one axle, usually in a trailing truck. This configuration of steam locomotive is most often referred to as a Mikado, frequently shortened to Mike. At times it was also referred to on some railroads in the United States of America as the McAdoo Mikado and, during World War II, the MacArthur. The notation 2-8-2T indicates a tank locomotive of this wheel arrangement, the "T" suffix indicating a locomotive on which the water is carried in tanks mounted on the engine rather than in an attached tender. Overview The 2-8-2 wheel arrangement allowed the locomotive's firebox to be placed behind instead of above the driving wheels, thereby allowing a larger firebox that could be both wide and deep. This supported a greater rate of combustion ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Great Northern Railway (United States) Locomotives
Great Northern Railway or Great Northern Railroad may refer to: Australia *Great Northern Railway (Queensland) in Australia *Great Northern Rail Services in Victoria, Australia *Central Australia Railway was known as the great Northern Railway in the 1890s in South Australia *Main North railway line, New South Wales (Australia) Canada *Great Northern Railway of Canada Ireland *Great Northern Railway (Ireland) New Zealand *Kingston Branch (New Zealand) in Southland *Main North Line, New Zealand and Waiau Branch in Canterbury United Kingdom *Great Northern Railway (Great Britain) **Thameslink and Great Northern, a current operator of trains on this route United States *Great Northern Railway (U.S.), now part of the BNSF Railway system *International – Great Northern Railroad in Texas, U.S., now part of the Union Pacific Railroad *New Orleans, Jackson and Great Northern The New Orleans, Jackson and Great Northern was a gauge railway originally commissioned by the St ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Railway Locomotives Introduced In 1910
Rail transport (also known as train transport) is a means of transport that transfers passengers and goods on wheeled vehicles running on rails, which are incorporated in tracks. In contrast to road transport, where the vehicles run on a prepared flat surface, rail vehicles (rolling stock) are directionally guided by the tracks on which they run. Tracks usually consist of steel rails, installed on sleepers (ties) set in ballast, on which the rolling stock, usually fitted with metal wheels, moves. Other variations are also possible, such as "slab track", in which the rails are fastened to a concrete foundation resting on a prepared subsurface. Rolling stock in a rail transport system generally encounters lower frictional resistance than rubber-tyred road vehicles, so passenger and freight cars (carriages and wagons) can be coupled into longer trains. The operation is carried out by a railway company, providing transport between train stations or freight customer facil ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Scrapped Locomotives
Scrap consists of recyclable materials, usually metals, left over from product manufacturing and consumption, such as parts of vehicles, building supplies, and surplus materials. Unlike waste, scrap has monetary value, especially recovered metals, and non-metallic materials are also recovered for recycling. Once collected, the materials are sorted into types — typically metal scrap will be crushed, shredded, and sorted using mechanical processes. Scrap recycling is important for creating a more sustainable economy or creating a circular economy, using significantly less energy and having far less environmental impact than producing metal from ore. Metal recycling, especially of structural steel, ships, used manufactured goods, such as vehicles and white goods, is a major industrial activity with complex networks of wrecking yards, sorting facilities and recycling plants. Processing Scrap metal originates both in business and residential environments. Typically a "scrapper" ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Baldwin Locomotives
Baldwin is a Germanic name, composed of the elements ''bald'' "bold" and ''win'' "friend". People * Baldwin (name) Places Canada * Baldwin, York Regional Municipality, Ontario * Baldwin, Ontario, in Sudbury District * Baldwin's Mills, Quebec United States * Baldwin County, Alabama * Baldwin, Florida * Baldwin, Georgia * Baldwin County, Georgia * Baldwin, Illinois * Baldwin, Iowa * Baldwin, Louisiana * Baldwin, Maine * Baldwin, Maryland * Baldwin, Michigan * Baldwyn, Mississippi * Baldwin, Chemung County, New York * Baldwin, Nassau County, New York ** Baldwin (LIRR station) * Baldwin, North Dakota * Baldwin, Pennsylvania * Baldwin, Wisconsin * Baldwin (town), Wisconsin Other places * Baldwin Street, in Dunedin, New Zealand, the world's steepest street * Baldwin Hills, neighborhood in Los Angeles, California * Montgomery, Powys, named in Welsh "Trefaldwyn", meaning "The Town of Baldwin" Companies * Baldwin Locomotive Works, one of the world's largest builders of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
