On a

steam locomotive A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material (usually coal, oil or, rarely, wood) to heat water in the locomot ...

, a driving wheel is a powered

wheel A wheel is a circular component that is intended to rotate on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machines. Wheels, in conjunction wi ...

which is driven by the

locomotive A locomotive or engine is a rail transport vehicle that provides the Power (physics), motive power for a train. If a locomotive is capable of carrying a payload, it is usually rather referred to as a multiple unit, Motor coach (rail), motor ...

piston A piston is a component of reciprocating engines, reciprocating pumps, gas compressors, hydraulic cylinders and pneumatic cylinders, among other similar mechanisms. It is the moving component that is contained by a cylinder and is made gas-tig ...

s (or

turbine A turbine ( or ) (from the Greek , ''tyrbē'', or Latin ''turbo'', meaning vortex) is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work. The work produced by a turbine can be used for generating e ...

, in the case of a

steam turbine locomotive A steam turbine locomotive is a steam locomotive which transmits steam power to the wheels via a steam turbine. Numerous attempts at this type of locomotive were made, mostly without success. In the 1930s this type of locomotive was seen as a way ...

). On a conventional, non-articulated locomotive, the driving wheels are all coupled together with side rods (also known as

coupling rod A coupling rod or side rod connects the driving wheels of a locomotive. Steam locomotives in particular usually have them, but some diesel and electric locomotives, especially older ones and shunters, also have them. The coupling rods transfer t ...

s); normally one pair is directly driven by the

main rod A connecting rod, also called a 'con rod', is the part of a piston engine which connects the piston to the crankshaft. Together with the crank, the connecting rod converts the reciprocating motion of the piston into the rotation of the crank ...

(or

connecting rod A connecting rod, also called a 'con rod', is the part of a piston engine which connects the piston to the crankshaft. Together with the crank, the connecting rod converts the reciprocating motion of the piston into the rotation of the cranksh ...

) which is connected to the end of the

piston rod In a piston engine, a piston rod joins a piston to the crosshead and thus to the connecting rod that drives the crankshaft or (for steam locomotives) the driving wheels. Internal combustion engines, and in particular all current automobile engin ...

; power is transmitted to the others through the side rods. On

diesel Diesel may refer to: * Diesel engine, an internal combustion engine where ignition is caused by compression * Diesel fuel, a liquid fuel used in diesel engines * Diesel locomotive, a railway locomotive in which the prime mover is a diesel engin ...

and

electric locomotive An electric locomotive is a locomotive powered by electricity from overhead lines, a third rail or on-board energy storage such as a battery or a supercapacitor. Locomotives with on-board fuelled prime movers, such as diesel engines or gas ...

s, the driving wheels may be directly driven by the

traction motor A traction motor is an electric motor used for propulsion of a vehicle, such as locomotives, electric vehicle, electric or hydrogen vehicles, elevators or electric multiple unit. Traction motors are used in electrically powered rail vehicles (ele ...

s. Coupling rods are not usually used, and it is quite common for each axle to have its own motor.

Jackshaft A jackshaft, also called a ''countershaft'', is a common mechanical design component used to transfer or synchronize rotational force in a machine. A jackshaft is often just a short stub with supporting bearings on the ends and two pulleys, gear ...

drive and coupling rods were used in the past (e.g. in the Swiss Crocodile locomotive) but their use is now confined to shunting locomotives. On an

articulated locomotive An articulated locomotive is a steam locomotive (rarely, an electric locomotive) with one or more engine units that can move independent of the main frame. Articulation allows the operation of locomotives that would otherwise be too large to neg ...

or a

duplex locomotive A duplex locomotive is a steam locomotive that divides the driving force on its wheels by using two pairs of cylinders rigidly mounted to a single locomotive frame; it is not an articulated locomotive. The concept was first used in France in 18 ...

, driving wheels are grouped into sets which are linked together within the set.

Diameter

Driving wheels are generally larger than

leading In typography, leading ( ) is the space between adjacent lines of type; the exact definition varies. In hand typesetting, leading is the thin strips of lead (or aluminium) that were inserted between lines of type in the composing stick to incre ...

trailing wheel On a steam locomotive, a trailing wheel or trailing axle is generally an unpowered wheel or axle ( wheelset) located behind the driving wheels. The axle of the trailing wheels is usually located in a trailing truck. On some large locomotives, ...

s. Since a conventional steam locomotive is directly driven, one of the few ways to '

gear A gear is a rotating circular machine part having cut teeth or, in the case of a cogwheel or gearwheel, inserted teeth (called ''cogs''), which mesh with another (compatible) toothed part to transmit (convert) torque and speed. The basic pr ...

' a locomotive for a particular performance goal is to size the driving wheels appropriately. Freight locomotives generally had driving wheels between in diameter; dual-purpose locomotives generally between , and passenger locomotives between or so. The driving wheels on express passenger locomotives have come down in diameter over the years, e.g. from on the

GNR Stirling 4-2-2 The Great Northern Railway (GNR) No. 1 class Stirling Single is a class of steam locomotive designed for express passenger work. Designed by Patrick Stirling, they are characterised by a single pair of large (8' 1") driving wheels which led ...

of 1870 to on the SR Merchant Navy Class of 1941. This is because improvements in valve design allowed for higher piston speeds.

Flangeless wheels

Some long wheelbase locomotives (four or more coupled axles) were equipped with blind drivers. These were driving wheels without the usual

flange A flange is a protruded ridge, lip or rim (wheel), rim, either external or internal, that serves to increase shear strength, strength (as the flange of an iron beam (structure), beam such as an I-beam or a T-beam); for easy attachment/transfer of ...

s, which allowed them to negotiate tighter curves without binding. Some three-driving-axle locomotives also had flangeless wheels on the middle axle, such as the

NZR WH class The NZR WH class was a class of three steam locomotives built by Manning Wardle in 1884 for service on New Zealand's private Wellington and Manawatu Railway Company (WMR). They did not acquire their WH classification until 1908 when WMR was natio ...

Balancing

On locomotives with

side rod A coupling rod or side rod connects the driving wheels of a locomotive. Steam locomotives in particular usually have them, but some diesel and electric locomotives, especially older ones and shunters, also have them. The coupling rods transfer t ...

s, including most

steam Steam is a substance containing water in the gas phase, and sometimes also an aerosol of liquid water droplets, or air. This may occur due to evaporation or due to boiling, where heat is applied until water reaches the enthalpy of vaporization ...

and

jackshaft A jackshaft, also called a ''countershaft'', is a common mechanical design component used to transfer or synchronize rotational force in a machine. A jackshaft is often just a short stub with supporting bearings on the ends and two pulleys, gear ...

locomotives, the driving wheels have weights to balance the weight of the coupling and connecting rods. The crescent-shaped balance weight is clearly visible in the picture on the right.

Whyte notation

In the

Whyte notation Whyte notation is a classification method for steam locomotives, and some internal combustion locomotives and electric locomotives, by wheel arrangement. It was devised by Frederick Methvan Whyte, and came into use in the early twentieth ce ...

, driving wheels are designated by the middle number or numbers in the set. The

UIC classification The UIC classification of locomotive axle arrangements, sometimes known as the German classification''The Railway Data File''. Leicester: Silverdale, 2000. p. 52. . or German system,Kalla-Bishop P.M. & Greggio, Luciano, ''Steam Locomotives'', Cre ...

system counts the number of axles rather than the number of wheels and driving wheels are designated by letters rather than numbers. The suffix 'o' is used to indicate independently-powered axles. The number of driving wheels on locomotives varied quite a bit. Some early locomotives had as few as two driving wheels (one axle). The largest number of total driving wheels was 24 (twelve axles) on the 2-8-8-8-2 and 2-8-8-8-4 locomotives. The largest number of coupled driving wheels was 14 (seven axles) on the ill-fated AA20 4-14-4 locomotive.

Other uses of the term ''driving wheel''

The term ''driving wheel'' is sometimes used to denote the ''

drive sprocket A sprocket, sprocket-wheel or chainwheel is a profiled wheel with teeth that mesh with a chain, track or other perforated or indented material. The name 'sprocket' applies generally to any wheel upon which radial projections engage a chain pa ...

'' which moves the

track Track or Tracks may refer to: Routes or imprints * Ancient trackway, any track or trail whose origin is lost in antiquity * Animal track, imprints left on surfaces that an animal walks across * Desire path, a line worn by people taking the shorte ...

on tracked vehicles such as

tank A tank is an armoured fighting vehicle intended as a primary offensive weapon in front-line ground combat. Tank designs are a balance of heavy firepower, strong armour, and good battlefield mobility provided by tracks and a powerful engin ...

s and

bulldozer A bulldozer or dozer (also called a crawler) is a large, motorized machine equipped with a metal blade to the front for pushing material: soil, sand, snow, rubble, or rock during construction work. It travels most commonly on continuous track ...

In popular culture

Many American roots artists, such as

The Byrds The Byrds () were an American rock band formed in Los Angeles, California, in 1964. The band underwent multiple lineup changes throughout its existence, with frontman Roger McGuinn (known as Jim McGuinn until mid-1967) remaining the sole cons ...

Tom Rush Thomas Walker Rush (born February 8, 1941) is an American folk and blues singer, guitarist and songwriter who helped launch the careers of other singer-songwriters in the 1960s and has continued his own singing career for 60 years. Life and ...

The Black Crowes The Black Crowes are an American rock band formed in Atlanta, Georgia, in 1984. Their discography includes eight studio albums, four live albums and several charting singles. The band was signed to Def American Recordings in 1989 by producer Geo ...

and the Canadian band

Cowboy Junkies Cowboy Junkies are an alternative country and folk rock band formed in Toronto, Ontario, Canada in 1985 by Alan Anton (bassist), Michael Timmins (songwriter, guitarist), Peter Timmins (drummer) and Margo Timmins (vocalist). The three Timminses ...

have performed a song written by

David Wiffen David Wiffen (born 11 March 1942) is an English-Canadian folk singer-songwriter. Two of his songs, " Driving Wheel" and "More Often Than Not", have become cover standards. Early life Wiffen was born in Redhill, Surrey, England.

called "Driving Wheel", with the lyrics "I feel like some old engine/ That's lost my driving wheel." These lyrics are a reference to the traditional blues song "Broke Down Engine Blues" by

Blind Willie McTell Blind Willie McTell (born William Samuel McTier; May 5, 1898 – August 19, 1959) was a Piedmont blues and ragtime singer and guitarist. He played with a fluid, syncopated fingerstyle guitar technique, common among many exponents of Piedmont b ...

, 1931. It was later directly covered by

Bob Dylan Bob Dylan (legally Robert Dylan, born Robert Allen Zimmerman, May 24, 1941) is an American singer-songwriter. Often regarded as one of the greatest songwriters of all time, Dylan has been a major figure in popular culture during a career sp ...

and

Johnny Winter John Dawson Winter III (February 23, 1944 – July 16, 2014) was an American singer and guitarist. Winter was known for his high-energy blues rock albums and live performances in the late 1960s and 1970s. He also produced three Grammy Award-win ...

. Many versions of the American folk song "

In the Pines "In the Pines", also known as "Where Did You Sleep Last Night?", "My Girl" and "Black Girl", is a traditional American folk song originating from two songs, "In the Pines" and "The Longest Train", both of whose authorship is unknown and date back ...

" performed by artists such as Leadbelly, Mark Lanegan (on ''

The Winding Sheet ''The Winding Sheet'' is the debut studio album by alternative rock artist Mark Lanegan. It was released on May 1, 1990 on Sub Pop. The album was Lanegan's first solo work, and is notable in its departure from the characteristic sound of Screamin ...

''), and

Nirvana ( , , ; sa, निर्वाण} ''nirvāṇa'' ; Pali: ''nibbāna''; Prakrit: ''ṇivvāṇa''; literally, "blown out", as in an oil lampRichard Gombrich, ''Theravada Buddhism: A Social History from Ancient Benāres to Modern Colombo.' ...

(On ''

MTV Unplugged In New York ''MTV Unplugged in New York'' is a live album by American Rock music, rock band Nirvana (band), Nirvana, released on November 1, 1994, by DGC Records. It features an acoustic performance recorded at Sony Music Studios in New York City on Novembe ...

'') reference a decapitated man's head found in a driving wheel. In addition, it is likely that Chuck Berry references the locomotive driving wheel in "Johnny B. Goode" when he sings, "the engineers would see him sitting in the shade / Strumming with the rhythm that the drivers made."

References

* {{Locomotive running gear Steam locomotive technologies Train wheels