|
Bristol Channel Cutter
The Bristol Channel Cutter, also called the Bristol Channel Cutter 28, is an American sailboat that was designed by Lyle Hess as a "character boat" cruiser and first built in 1976. The boat is based upon Hess's earlier ''Renegade'' design. Production The design was built by Sam L. Morse Co. of Costa Mesa, California, United States, who completed 128 boats between 1976 and 2007. In 2011 one boat was built by Cape George Marine Works in Port Townsend, Washington. Between 30 and 45 boats were also built in Vancouver, British Columbia, Canada, by two companies. The hulls were built by Steveston Fiberglass and the finish work performed by G & B Woodworks. There are reports of royalties not being paid to Lyle Hess and Sam L. Morse for the construction of the Canadian hulls. The rumor is a result of confusion over Hull Identification Numbers (HIN). At the time the Canadian Bristol Channel Cutter hulls were built, Canada did not require HINs and this resulted in a number of Bristo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Lyle Hess
use both this parameter and , birth_date to display the person's date of birth, date of death, and age at death) --> , death_place = , death_cause = , resting_place = , resting_place_coordinates = , burial_place = , burial_coordinates = , nationality = American , education = , alma_mater = , occupation = Naval architect , years_active = , era = , employer = , organization = , known_for = sailboat designs , party = , spouse = Jean "Doodle" Searing , children = , parents = , mother = , father = Frank Hess , relatives = , family = , awards = Lyle C. Hess (1912–2002) was an American naval architect, particularly known for his Aquarius and Balboa series of boats, built by Coastal Recreation. Early life Hess was born in 1912, in Blackf ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Port Townsend, Washington
Port Townsend is a city on the Quimper Peninsula in Jefferson County, Washington, United States. The population was 10,148 at the 2020 United States Census. It is the county seat and only incorporated city of Jefferson County. In addition to its natural scenery at the northeast tip of the Olympic Peninsula, the city is known for the many Victorian buildings remaining from its late 19th-century heyday, numerous annual cultural events, and as a maritime center for independent boatbuilders and related industries and crafts. The Port Townsend Historic District is a U.S. National Historic Landmark District. It is also significantly drier than the surrounding region due to being in the rainshadow of the Olympic Mountains, receiving only of rain per year. History The bay was originally named "Port Townshend" by Captain George Vancouver in 1792, for his friend the Marquis of Townshend. It was immediately recognized as a good safe harbor, although strong south winds and poor holdin ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Quarter Berth
A berth is a bed or sleeping accommodation on vehicles. Space accommodations have contributed to certain common design elements of berths. Beds in boats or ships While beds on large ships are little different from those on shore, the lack of space on smaller yachts means that bunks must be fit in wherever possible. Some of these berths have specific names: ;V-berth: Frequently yachts have a bed in the extreme forward end of the hull (usually in a separate cabin called the forepeak). Because of the shape of the hull this bed is basically triangular, though most also have a triangular notch cut out of the middle of the aft end, splitting it partially into two separate beds and making it more of a V shape, hence the name. This notch can usually be filled in with a detachable board and cushion, creating something more like a double bed (though with drastically reduced space for the feet; 12" wide is typical). The term "V-berth" is not widely used in the UK, instead the cabin a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pilot Berth
A berth is a bed or sleeping accommodation on vehicles. Space accommodations have contributed to certain common design elements of berths. Beds in boats or ships While beds on large ships are little different from those on shore, the lack of space on smaller yachts means that bunks must be fit in wherever possible. Some of these berths have specific names: ;V-berth: Frequently yachts have a bed in the extreme forward end of the hull (usually in a separate cabin called the forepeak). Because of the shape of the hull this bed is basically triangular, though most also have a triangular notch cut out of the middle of the aft end, splitting it partially into two separate beds and making it more of a V shape, hence the name. This notch can usually be filled in with a detachable board and cushion, creating something more like a double bed (though with drastically reduced space for the feet; 12" wide is typical). The term "V-berth" is not widely used in the UK, instead the cabin a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Yanmar
is a Japanese diesel engine, Heavy equipment, heavy machinery and agricultural machinery manufacturer founded in Osaka, Japan in 1912. Yanmar manufactures and sells engines used in a wide range of applications, including seagoing vessels, pleasure boats, construction equipment, agricultural equipment and generator sets. It also manufactures and sells, climate control systems, and aquafarming systems, in addition to providing a range of remote monitoring services. Company description Yanmar was founded in March 1912 in Osaka, Japan by Magokichi Yamaoka. When the company began in 1912, it manufactured gasoline-powered engines. In 1920 the company began production of a small kerosene engine. In 1933, it launched the world's first practical small diesel engine, the HB model. In 1961 the agricultural machinery division of the company was started. Yanmar also started supplying engines to John Deere tractors and for some Thermo King Corporation coolers used in Refrigerator truck, ref ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Boomkin
A boomkin, bumkin, or bumpkin is a short spar that may project either fore or aft on a sailing vessel, depending on its function. Traditionally, it was a strong, usually wooden spar extending forward over the bow of a Western sailing ship holding a block through which the tack of the foresail was passed; on some modern sailing yachts with long main booms it is a short spar extending aft from the stern anchoring a central backstay. Historically, boomkins were employed in pairs, one on either side of the vessel, often canted downwards over the main head-rail. Originally butted at their inboard ends against a knighthead, bolting prevailed since the end of the 18th century. They are not to be confused with catheads, heavy wooden beams on either side of a traditional vessel's bow angled forward at roughly 45 degrees which support the ship's anchors when being raised or lowered. History Traditional boomkins found on English sailing vessels gradually evolved from 1710 until around 18 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bowsprit
The bowsprit of a sailing vessel is a spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay that counteracts the forces from the forestays. The word ''bowsprit'' is thought to originate from the Middle Low German word ''bōchsprēt'' – ''bōch'' meaning "bow" and ''sprēt'' meaning "pole". It is sometimes used to hold up the figurehead In politics, a figurehead is a person who ''de jure'' (in name or by law) appears to hold an important and often supremely powerful title or office, yet ''de facto'' (in reality) exercises little to no actual power. This usually means that they .... References References * {{Sailing ship elements Sailboat components ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Keel
The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in British and American shipbuilding traditions the construction is dated from this event. Etymology The word "keel" comes from Old English , Old Norse , = "ship" or "keel". It has the distinction of being regarded by some scholars as the first word in the English language recorded in writing, having been recorded by Gildas in his 6th century Latin work ''De Excidio et Conquestu Britanniae'', under the spelling ''cyulae'' (he was referring to the three ships that the Saxons first arrived in). is the Latin word for "keel" and is the origin of the term careen (to clean a keel and the hull in general, often by rolling the ship on its side). An example of this use is Careening Cove, a suburb of Sydney, Australia, where careening was carried out ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tiller
A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. A tiller may also be used in vehicles outside of water, and was seen in early automobiles. On vessels, a tiller can be used by the helmsman directly pulling or pushing it, but it may also be moved remotely using tiller lines or a ship's wheel. Rapid or excessive movement of the tiller results in an increase in drag and will result in braking or slowing the boat. Description A tiller is a lever used to steer a vehicle. It provides leverage in the form of torque to turn the device that changes the direction of the vehicle, such as a rudder on a watercraft or the surface wheels on a wheeled vehicle. A tiller can be used by directly pulling or pushing it, but it may also be moved remotely using tiller lines or a ship's wheel; some kayaks wh ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Transom (nautical)
A transom is the vertical reinforcement which strengthens the stern of a boat. This flat termination of the stern is typically above the waterline. The term was used as far back as Middle English in the 1300s, having come from Latin ''transversus'' (transverse) via Old French ''traversain'' (set crosswise). The stern of a boat is typically vertical. It can be raked such that there is an overhang above the water, as at the bow. A reverse transom is angled from the waterline forwards. Transoms can be used to support a rudder, outboard motor, or as a swimming and access platform. Gallery File:The Bermuda cedar (Juniperus bermudiana) transom of Spirit of Bermuda, 2016.jpg, The Bermuda cedar transom of the Spirit of Bermuda File:Sea Scooter transom.jpg, Flat transom on a dinghy with mount points for a rudder. File:Coble on shore at Boulmer (2) - geograph.org.uk - 1381157.jpg, Raked transom with rudder mount points. File:CS 30 Sailboat Kelsea 0297.jpg, Reverse transom with rudder m ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Plumb Stem
The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to the gunwale of the boat. It is part of the physical structure of a wooden boat or ship that gives it strength at the critical section of the structure, bringing together the port and starboard side planks of the hull. Plumb and raked stem There are two styles of stems: ''plumb'' and ''raked''. When the stem comes up from the water, if it is perpendicular to the waterline it is "plumb". If it is inclined at an angle to the waterline it is "raked". (For example, "The hull is single decked and characterized by a plumb stem, full bows, straight keel, moderate deadrise, and an easy turn of bilge.") Stemhead Because the stem is very sturdy, the top end of it may have something attached, either ornamental or functional in nature. On smalle ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cutter Rig
A cutter is a type of watercraft. The term has several meanings. It can apply to the rig (or Sail plan, sailplan) of a sailing vessel (but with regional differences in definition), to a governmental enforcement agency vessel (such as a coast guard or border force cutter), to a type of ship's boat which can be used under sail or oars, or, historically, to a type of fast-sailing vessel introduced in the 18th century, some of which were used as small warships. As a sailing rig, a cutter is a single-masted boat, with two or more headsails. On the eastern side of the Atlantic Ocean, Atlantic, the two headsails on a single mast is the fullest extent of the modern definition. In U.S. waters, a greater level of complexity applies, with the placement of the mast and the rigging details of the bowsprit taken into account so a boat with two headsails may be classed as a sloop. Government agencies use the term "cutter" for vessels employed in patrolling their territorial waters and other ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
_bunks.jpg "Click for more on -> Pilot Berth")
_port_side_8.JPG "Click for more on -> Boomkin")
.jpg "Click for more on -> Bowsprit")
