Audio crossoverAudio crossovers are a type of electronic filter circuitry that splits an audio signal into two or more frequency ranges, so that the signals can be sent to loudspeaker drivers that are designed to operate within different frequency ranges. The crossover filters can be either active or passive. They are often described as two-way or three-way, which indicate, respectively, that the crossover splits a given signal into two frequency ranges or three frequency ranges.
Loudspeaker enclosureA loudspeaker enclosure or loudspeaker cabinet is an enclosure (often rectangular box-shaped) in which speaker drivers (e.g., woofers and tweeters) and associated electronic hardware, such as crossover circuits and, in some cases, power amplifiers, are mounted.
Electrodynamic speaker driverAn electrodynamic speaker driver, often called simply a speaker driver when the type is implicit, is an individual transducer that converts an electrical audio signal to sound waves. While the term is sometimes used interchangeably with the term speaker (loudspeaker), it is usually applied to specialized transducers that reproduce only a portion of the audible frequency range, or to the one or more drivers within a loudspeaker cabinet (or simply "speaker".).Audio signalAn audio signal is a representation of sound, typically using either a changing level of electrical voltage for analog signals or a series of binary numbers for digital signals. Audio signals have frequencies in the audio frequency range of roughly 20 to 20,000 Hz, which corresponds to the lower and upper limits of human hearing.
MicrophoneA microphone, colloquially called a mic (), or mike, is a transducer that converts sound into an electrical signal. Microphones are used in telecommunication, sound recording, broadcasting, and consumer electronics, including telephones, hearing aids, and mobile devices. Several types of microphone are used today, which employ different methods to convert the air pressure variations of a sound wave to an electrical signal.Diaphragm (acoustics)In the field of acoustics, a diaphragm is a transducer intended to inter-convert mechanical vibrations to sounds, or vice versa. It is commonly constructed of a thin membrane or sheet of various materials, suspended at its edges. The varying air pressure of sound waves imparts mechanical vibrations to the diaphragm which can then be converted to some other type of signal; examples of this type of diaphragm are found in microphones and the human eardrum.
SoundDrum cadences performed by the United States Navy BandProblems playing this file? See .Sound is a phenomenon in which pressure disturbances propagate through an elasticmaterialmedium. In the context of physics, it is characterised as a mechanical wave of pressure or related quantities (e.g. displacement), whereas in physiological-psychological contexts it implies a hearing process.
Linear motorA linear motor is an electric motor that has had its stator and rotor "unrolled", thus it produces a linearforce along its length, rather than a rotational force (torque). However, linear motors are not necessarily straight. Characteristically, a linear motor's active section has ends, whereas more conventional motors are arranged as a continuous loop. Linear motors are used by the millions in high accuracy CNC machining and in industrial robots.
Electric generatorU.S. NRC image of a modern steam turbine generator (STG)In electricity generation, a generator, also called an electric generator, electrical generator, and electromagnetic generator is an electromechanical device that converts mechanical energy to electrical energy for use in an external circuit.
Acoustical engineeringAcoustical engineering (also known as acoustic engineering) is the branch of engineering dealing with sound and vibration. It includes the application of acoustics, the science of sound and vibration, in technology. Acoustical engineers are typically concerned with the design, analysis and control of sound. One goal of acoustical engineering can be the reduction of unwanted noise, which is referred to as noise control.
TransducerA transducer is a device that usefully converts energy from one form to another. Usually a transducer converts a signal in one form of energy to a signal in another. Transducers are often employed at the boundaries of automation, measurement, and control systems, where electrical signals are converted to and from other physical quantities (energy, force, torque, light, motion, position, etc.). The process of converting one form of energy to another is known as transduction.
corrugatedRelated word or term.Special:Search/loudspeakerRelated word or term.*As an Amazon Associate I earn from qualifying purchases.