The Endeavour 40 is an American

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by Robert K. Johnson as a

cruiser A cruiser is a type of warship. Modern cruisers are generally the largest ships in a fleet after aircraft carriers and amphibious assault ships, and can usually perform several roles. The term "cruiser", which has been in use for several hu ...

and first built in 1981.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 346-347. Houghton Mifflin Company, 1994.

Production

The design was built by the

Endeavour Yacht Corporation The Endeavour Yacht Corporation was an American boat builder based in Largo, Florida. Founded in 1974 by John Brooks and Rob Valdes, the company specialized in the design and manufacture of fiberglass sailboats. The company went out of business ...

in the

United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...

. The company built about 185 examples between 1981 and 1985, but it is now out of production.

Design

The Endeavour 40 was intended for both the private owner's market and

yacht charter Yacht chartering is the practice of renting, or chartering, a sailboat or motor yacht and travelling to various coastal or island destinations. This is usually a vacation activity, but it also can be a business event. There are two main kinds ...

operators and was intended to compete directly with boats built by Gulfstar Yachts, as both company principals, John Books and Rob Valdes has previously worked for Gulfstar. The Endeavour 40 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open wat ...

, built predominantly of polyester resin and

fiberglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cloth ...

woven roving and multi-directional chopped strand fiber, with

teak Teak (''Tectona grandis'') is a tropical hardwood tree species in the family Lamiaceae. It is a large, deciduous tree that occurs in mixed hardwood forests. ''Tectona grandis'' has small, fragrant white flowers arranged in dense clusters (panicl ...

wood trim. It has a center cockpit,

masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, ...

rig or optional

ketch A ketch is a two- masted sailboat whose mainmast is taller than the mizzen mast (or aft-mast), and whose mizzen mast is stepped forward of the rudder post. The mizzen mast stepped forward of the rudder post is what distinguishes the ketch fr ...

rig, with

aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It has ...

spars, a

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a

reverse transom A transom is the vertical reinforcement which strengthens the stern of a boat. This flat termination of the stern is typically above the waterline. The term was used as far back as Middle English in the 1300s, having come from Latin ''transvers ...

, a

skeg A skeg (or skegg or skag) is a sternward extension of the keel of boats and ships which have a rudder mounted on the centre line. The term also applies to the lowest point on an outboard motor or the outdrive of an inboard/outboard."A small fin f ...

-mounted

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...

controlled by a

wheel A wheel is a circular component that is intended to rotate on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machines. Wheels, in conjunction wi ...

and a fixed fin

keel The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in Br ...

. It displaces and carries of structural lead ballast. The boat has a draft of with the standard keel fitted. The boat is fitted with a British

Perkins Engines Perkins Engines Company Limited, a subsidiary of Caterpillar Inc since 1998, is primarily a diesel engine manufacturer for several markets including agricultural, construction, material handling, power generation, and industrial. It was establis ...

4-108

diesel engine The diesel engine, named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated temperature of the air in the cylinder due to mechanical compression; thus, the diesel engine is a so-call ...

of for docking and maneuvering. The fuel tank holds and the fresh water tank has a capacity of . The design has sleeping accommodation for six people, with a double "V"-berth in the bow cabin, two straight settees in the main cabin and an aft cabin with a double berth. The main cabin features a folding dining table with two drop-leaves. The

galley A galley is a type of ship that is propelled mainly by oars. The galley is characterized by its long, slender hull, shallow draft, and low freeboard (clearance between sea and gunwale). Virtually all types of galleys had sails that could be used ...

is located on the port side just aft of the

companionway In the architecture of a ship, a companion or companionway is a raised and windowed hatchway in the ship's deck, with a ladder leading below and the hooded entrance-hatch to the main cabins. A companionway may be secured by doors or, commonly in ...

ladder. The galley is "L"-shaped and is equipped with a three-burner alcohol-fired stove and a double sink with hot and cold pressurized water and a fresh water pump, plus a

refrigerator A refrigerator, colloquially fridge, is a commercial and home appliance consisting of a thermally insulated compartment and a heat pump (mechanical, electronic or chemical) that transfers heat from its inside to its external environment so th ...

. A navigation station is opposite the galley, on the starboard side. There are two

heads A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple animals may no ...

, one just aft of the bow cabin on the starboard side that includes a shower and one on the port side in the aft cabin. The engine room is located centrally, under the companionway ladder. The cabin is trimmed in teak. Ventilation is provided by 16 ports that open and four hatches. For sailing the

mainsail A mainsail is a sail rigged on the main mast of a sailing vessel. * On a square rigged vessel, it is the lowest and largest sail on the main mast. * On a fore-and-aft rigged vessel, it is the sail rigged aft of the main mast. The sail's foot ...

has a

mainsheet traveler A traveller is a part of the rigging of a boat or ship that provides a moving attachment point for a rope, sail or yard to a fixed part of the vessel. It may take the form of anything from a simple ring on a metal bar or a spar to, especially in a ...

at the aft of the center cockpit, two winches for the

genoa Genoa ( ; it, Genova ; lij, Zêna ). is the capital of the Italian region of Liguria and the List of cities in Italy, sixth-largest city in Italy. In 2015, 594,733 people lived within the city's administrative limits. As of the 2011 Italian ce ...

sheets A bed sheet is a rectangular piece of cloth used either singly or in a pair as bedding, which is larger in length and width than a mattress, and which is placed immediately above a mattress or bed, but below blankets and other bedding (such as ...

and one for the

mainsheet In sailing, a sheet is a line (rope, cable or chain) used to control the movable corner(s) ( clews) of a sail. Terminology In nautical usage the term "sheet" is applied to a line or chain attached to the lower corners of a sail for the purpos ...

, plus two winches for the main and genoa

halyard In sailing, a halyard or halliard is a line (rope) that is used to hoist a ladder, sail, flag or yard. The term ''halyard'' comes from the phrase "to haul yards". Halyards, like most other parts of the running rigging, were classically made of n ...

s. The boat is equipped with a

topping lift The topping lift (more rarely known as an uphaul) is a line which applies upward force on a boom on a sailboat. Part of the running rigging, topping lifts are primarily used to hold a boom up when the sail is lowered. This line would run from ne ...

and slab

reefing Reefing reduces the area of a sail, usually by folding or rolling one edge of the canvas in on itself and attaching the unused portion to a spar or a stay, as the primary measure to preserve a sailing vessel's stability in strong winds. Restoring ...

. The design has a

PHRF Performance Handicap Racing Fleet (PHRF) is a handicapping system used for yacht racing in North America. It allows dissimilar classes of sailboats to be raced against each other. The aim is to cancel out the inherent advantages and disadvantages ...

racing average handicap of 126.

Operational history

In a 1994 review Richard Sherwood wrote that the Endeavour 40 "is a big, comfortable cruiser intended for extended trips. Note that both fuel and water capacity are high. Ballast/displacement ratio is 36 percent. The cockpit, like most center cockpits, is high and therefore dry." Steve Knauth wrote a review for ''Soundings Magazine'' in 2008 and stated, "the 1980s hull design features a modified fin keel with a skeg-protected rudder. The forefoot is slightly flatter than a traditional wineglass hull, and the 13-foot beam is carried well aft for form stability and interior volume. Sail area is 743 square feet, with a 338-square-foot main and 405-square-foot foretriangle. The center cockpit is farther aft than some designs, and it’s high and dry."

References

{{Endeavour Yachts Keelboats 1980s sailboat type designs Sailing yachts Sailboat type designs by Robert K. Johnson Sailboat types built by Endeavour Yacht Corporation

Production

Design

Operational history

See also

References