|
ISDN User Part
The ISDN (Integrated Services Digital Network) User Part or ISUP is part of Signaling System No. 7 (SS7), which is used to set up telephone calls in the public switched telephone network (PSTN). It is specified by the ITU-T as part of the Q.76x series.. When a telephone call is set up from one subscriber to another, several telephone exchanges could be involved, possibly across international boundaries. To allow a call to be set up correctly, where ISUP is supported, a switch will signal call-related information like called party number to the next switch in the network using ISUP messages. The telephone exchanges may be connected via T1 or E1 trunks which transport the speech from the calls. These trunks are divided into 64 kbit/s timeslots, and one timeslot can carry exactly one call. Regardless of what facilities are used to interconnect switches, each circuit between two switches is uniquely identified by a circuit identification code (CIC) that is included in the ISUP messa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Circuit Identification Code
The ISDN Services User Part ( ISUP) Circuit Identification Code (CIC) is part of the Signaling System #7 which is used to set up telephone calls in Public Switched Telephone Networks as part of the Initial Address Message (IAM). When a telephone call is set up from one subscriber to another, many telephone exchanges will be involved, possibly across international boundaries. To allow a call to be set up correctly, where ISUP is supported, a switch will signal call-related information like called or calling party number to the next switch In electrical engineering, a switch is an electrical component that can disconnect or connect the conducting path in an electrical circuit, interrupting the electric current or diverting it from one conductor to another. The most common type of ... in the network using ISUP messages. The CIC provides information about where the voice part of the call is carried - on which trunk and in which timeslot. References Integrated Services Di ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Signaling System No
In signal processing, a signal is a function that conveys information about a phenomenon. Any quantity that can vary over space or time can be used as a signal to share messages between observers. The ''IEEE Transactions on Signal Processing'' includes audio, video, speech, image, sonar, and radar as examples of signal. A signal may also be defined as observable change in a quantity over space or time (a time series), even if it does not carry information. In nature, signals can be actions done by an organism to alert other organisms, ranging from the release of plant chemicals to warn nearby plants of a predator, to sounds or motions made by animals to alert other animals of food. Signaling occurs in all organisms even at cellular levels, with cell signaling. Signaling theory, in evolutionary biology, proposes that a substantial driver for evolution is the ability of animals to communicate with each other by developing ways of signaling. In human engineering, signals are typi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Regional Bell Operating Company
The Regional Bell Operating Companies (RBOC) are the result of ''United States v. AT&T'', the U.S. Department of Justice antitrust suit against the former American Telephone & Telegraph Company (later known as AT&T Corp.). On January 8, 1982, AT&T Corp. settled the suit and agreed to divest its local exchange service operating companies. Effective January 1, 1984, AT&T Corp.'s local operations were split into seven independent Regional Bell Operating Companies known as the Baby Bells. RBOCs were originally known as Regional Holding Companies (RHCs). Currently, three companies have the RBOCs as predecessors: AT&T, Verizon, and Lumen Technologies. Some other companies are holding onto smaller segments of the companies. Baby Bells A baby bell is local telephone company in the United States that was in existence at the time of the breakup of AT&T into the resulting Regional Bell Operating Companies (RBOCs), also known as the "Baby Bells." Sometimes also referred to as an "ILEC ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Integrated Services Digital Network
Integrated Services Digital Network (ISDN) is a set of communication standards for simultaneous digital transmission of voice, video, data, and other network services over the digitalised circuits of the public switched telephone network. Work on the standard began in 1980 at Bell Labs and was formally standardized in 1988 in the CCITT "Red Book". By the time the standard was released, newer networking systems with much greater speeds were available, and ISDN saw relatively little uptake in the wider market. One estimate suggests ISDN use peaked at a worldwide total of 25 million subscribers at a time when 1.3 billion analog lines were in use. ISDN has largely been replaced with digital subscriber line (DSL) systems of much higher performance. Prior to ISDN, the telephone system consisted of digital links like T1/ E1 on the long-distance lines between telephone company offices and analog signals on copper telephone wires to the customers, the " last mile". At the time, t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Message Signal Unit
A message is a discrete unit of communication intended by the source for consumption by some recipient or group of recipients. A message may be delivered by various means, including courier, telegraphy, carrier pigeon and electronic bus. A message can be the content of a broadcast. An interactive exchange of messages forms a conversation. One example of a message is a press release, which may vary from a brief report or statement released by a public agency to commercial publicity material. History Roles in human communication In communication between humans, messages can be verbal or nonverbal: * A verbal message is an exchange of information using words. Examples include face-to-face communication, telephone calls, voicemails, email etc. * A nonverbal message is communicated through actions or behaviors rather than words, such as conscious or unconscious body language. In computer science There are two main senses of the word "message" in computing: messages ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bearer Capability
Bearer Capability in telecommunications is one of the Information Elements (fields) of the Q.931 SETUP message. It is used by the calling party to specify the kind of B channel that is being requested. Description For example, if a Bearer Capability of Speech is specified, then the network is free to select a set of facilities that are able to provide this service (including, in this case, analogue trunks and routes involving echo cancellers or DCME). If, on the other hand, a Bearer Capability of Unrestricted Digital Information is specified, then the network is required to set up the call using only end-to-end digital facilities (without the use of robbed-bit signalling, echo cancellers, DCME nor A-law An A-law algorithm is a standard companding algorithm, used in European 8-bit PCM digital communications systems to optimize, i.e. modify, the dynamic range of an analog signal for digitizing. It is one of two versions of the G.711 standar ... to mu-law conversion), or ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Quality Of Service
Quality of service (QoS) is the description or measurement of the overall performance of a service, such as a telephony or computer network, or a cloud computing service, particularly the performance seen by the users of the network. To quantitatively measure quality of service, several related aspects of the network service are often considered, such as packet loss, bit rate, throughput, transmission delay, availability, jitter, etc. In the field of computer networking and other packet-switched telecommunication networks, quality of service refers to traffic prioritization and resource reservation control mechanisms rather than the achieved service quality. Quality of service is the ability to provide different priorities to different applications, users, or data flows, or to guarantee a certain level of performance to a data flow. Quality of service is particularly important for the transport of traffic with special requirements. In particular, developers have introduced Voice ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Trunk Prefix
A trunk prefix is a digit sequence to be dialed before a telephone number to initiate a telephone call for the purpose of selecting an appropriate telecommunications circuit by which the call is to be routed. Making a domestic (national) telephone call usually requires the dialing of a single or two-digit national trunk prefix preceding any area codes and the destination subscriber number. In most countries, such as Australia, China, India, France, Germany, Indonesia, Japan, the Netherlands, Sweden, and the United Kingdom, the trunk prefix is 0. For international telephone calls, the national trunk prefix is not dialed; instead, an international trunk prefix (or "+") is typically required, followed by the destination's country code. Example Assume that a call is to be made to a customer in the Australian Area/State of Queensland with the local number of 3333 3333 and the area code 7. A caller from outside Australia must dial the international call prefix of the originating coun ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Call Setup
In telecommunication, call setup is the process of establishing a virtual circuit across a telecommunications network. Call setup is typically accomplished using a signaling protocol. The term call set-up time has the following meanings: # The overall length of time required to establish a circuit-switched call between users. # For data communication, the overall length of time required to establish a circuit-switched call between terminals; ''i.e.,'' the time from the initiation of a call request to the beginning of the call message. ''Note:'' Call set-up time is the summation of: (a) call request time—the time from initiation of a calling signal to the delivery to the caller of a proceed-to-select signal; (b) selection time—the time from the delivery of the proceed-to-select signal until all the selection signals have been transmitted; and (c) post selection time—the time from the end of the transmission of the selection signals until the delivery of the call-connecte ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Signalling Connection Control Part
{{SS7stack The Signalling Connection Control Part (SCCP) is a network layer protocol that provides extended routing, flow control, segmentation, connection-orientation, and error correction facilities in Signaling System 7 telecommunications networks. SCCP relies on the services of [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Message Transfer Part
The Message Transfer Part (MTP) is part of the Signaling System 7 (SS7) used for communication in Public Switched Telephone Networks. MTP is responsible for reliable, unduplicated and in-sequence transport of SS7 messages between communication partners. MTP is formally defined primarily in ITU-T recommendationQ.701 an Q.705 Tests for the MTP are specified in the recommendation [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
