Holden Motor
The Holden straight-six motor is a series of straight-six engines that were produced by General Motors Holden at their Port Melbourne plant between 1948 and 1986. The initial ''Grey'' motor was so dubbed because of the colour of the cylinder block, later motors came in the form of a ''Red'', ''Blue'', ''Black'', and the four-cylinder ''Starfire'' engine. These engines were fitted to all Australian designed Holdens of the same years, and the four-cylinder ''Starfire'' notably also found its way into the Toyota Corona (XT130). The ''Grey'' motor is a different engine from the others, while the ''Red'', ''Blue'', ''Black,'' and even the Starfire are all inter-related with many common parts and castings. Grey The ''Grey'' motor, built between 1948 and 1963, (the last on 2 August 1963) earned its name as the engine block was painted grey. This overhead valve engine was first fitted to the Holden 48-215 (and variants) and mated to a three-speed column change gearbox. A three-spee ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Straight-six Engine
A straight-six engine (also referred to as an inline-six engine; abbreviated I6 or L6) is a piston engine with six cylinders arranged in a straight line along the crankshaft. A straight-six engine has perfect primary and secondary engine balance, resulting in fewer vibrations than other designs of six or fewer cylinders. Until the mid-20th century, the straight-six layout was the most common design for engines with six cylinders. However, V6 engines gradually became more common in the 1970s and by the 2000s, V6 engines had replaced straight-six engines in most light automotive applications. Characteristics In terms of packaging, straight-six engines are almost always narrower than a V6 engine or V8 engine, but longer than straight-four engines, V6s, and most V8s. Compared to V-configuration engines with similar power and displacement, the straight configuration has fewer injectors, a single head, and a single exhaust manifold, all contributing to better reliability and perfor ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Holden EJ
The Holden EJ is a motor vehicle produced by Holden in Australia from 1962 to 1963. Introduced in July 1962,Holden EJ Technical Specifications Retrieved from www.uniquecarsandparts.com.au on 24 March 2010 the EJ replaced the Holden EK series. Overview The styling of the EJ was a radical departure from that of the EK, with a lower roofline, a flatter boot and an absence of fins. Improvements were made to the brakes, front suspension and the Hydra-matic automatic transmission. A new luxury model, theHolde ...
[...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Cast-iron
Cast iron is a class of iron–carbon alloys with a carbon content of more than 2% and silicon content around 1–3%. Its usefulness derives from its relatively low melting temperature. The alloying elements determine the form in which its carbon appears: white cast iron has its carbon combined into an iron carbide named cementite, which is very hard, but brittle, as it allows cracks to pass straight through; Grey iron, grey cast iron has graphite flakes which deflect a passing crack and initiate countless new cracks as the material breaks, and Ductile iron, ductile cast iron has spherical graphite "nodules" which stop the crack from further progressing. Carbon (C), ranging from 1.8 to 4 wt%, and silicon (Si), 1–3 wt%, are the main alloying elements of cast iron. Iron alloys with lower carbon content are known as steel. Cast iron tends to be brittle, except for malleable iron, malleable cast irons. With its relatively low melting point, good fluidity, castability ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Forklift
A forklift (also called industrial truck, lift truck, jitney, hi-lo, fork truck, fork hoist, and forklift truck) is a powered industrial truck used to lift and move materials over short distances. The forklift was developed in the early 20th century by various companies, including Clark Material Handling Company, Clark, which made Transmission (mechanics), transmissions, and Yale Materials Handling Corporation, Yale & Towne Manufacturing, which made Hoist (device), hoists. Since World War II, the development and use of the forklift truck has greatly expanded worldwide. Forklifts have become an indispensable piece of equipment in manufacturing and warehousing. In 2013, the top 20 manufacturers worldwide posted sales of $30.4 billion, with 944,405 machines sold. History Developments from the middle of the 19th century to the early 20th century led to today's modern forklifts. The forerunners of the modern forklift were manually powered hoists to lift loads. In 1906, the Penns ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Torque
In physics and mechanics, torque is the rotational analogue of linear force. It is also referred to as the moment of force (also abbreviated to moment). The symbol for torque is typically \boldsymbol\tau, the lowercase Greek letter ''tau''. When being referred to as moment of force, it is commonly denoted by . Just as a linear force is a push or a pull applied to a body, a torque can be thought of as a twist applied to an object with respect to a chosen point; for example, driving a screw uses torque to force it into an object, which is applied by the screwdriver rotating around its axis to the drives on the head. Historical terminology The term ''torque'' (from Latin , 'to twist') is said to have been suggested by James Thomson and appeared in print in April, 1884. Usage is attested the same year by Silvanus P. Thompson in the first edition of ''Dynamo-Electric Machinery''. Thompson describes his usage of the term as follows: Today, torque is referred to using d ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Compression Ratio
The compression ratio is the ratio between the maximum and minimum volume during the compression stage of the power cycle in a piston or Wankel engine. A fundamental specification for such engines, it can be measured in two different ways. The simpler way is the static compression ratio: in a reciprocating engine, this is the ratio of the volume of the cylinder when the piston is at the bottom of its stroke to that volume when the piston is at the top of its stroke. The dynamic compression ratio is a more advanced calculation which also takes into account gases entering and exiting the cylinder during the compression phase. Effect and typical ratios A high compression ratio is desirable because it allows an engine to extract more mechanical energy from a given mass of air–fuel mixture due to its higher thermal efficiency. This occurs because internal combustion engines are heat engines, and higher compression ratios permit the same combustion temperature to be reached wit ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Ford Of Britain
Ford Motor Company Limited,The Ford 'companies' or corporate entities referred to in this article are: * Ford Motor Company, Dearborn, Michigan, USA, incorporated 16 June 1903 * Ford Motor Company Limited, incorporated 7 December 1928. Current (July 2023) registered office at Arterial Road, Laindon, Essex, England, SS15 6EE , manufacturer and seller of motor vehicles and parts * Ford Motor Company (England) Limited, incorporated in 1909, ''purchased by Ford Motor Company Limited December 1928'' * Henry Ford and Son, Dearborn, Michigan, November 1915, incorporated 8 October 1917 * Henry Ford and Son Limited, Cork incorporated 17 April 1917, ''purchased by Ford Motor Company Limited December'' 1928 Holding company for Ford's European and Egyptian businesses and in addition Lincoln Cars Limited, London, and Henry Ford and Son, Cork: * Société d'Investissements Ford, Luxembourg, was liquidated during 1939 and its assets transferred to: * Ford Investment Company Limited, Guernsey, ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Vauxhall Motors
Vauxhall Motors Limited , ;Company No. 00135767. Incorporated 12 May 1914, name changed from Vauxhall Motors Limited to General Motors UK Limited on 16 April 2008, reverted to Vauxhall Motors Limited on 18 September 2017. is a British Automotive industry, car company headquartered in Chalton, Bedfordshire, Chalton, Bedfordshire, England. Vauxhall became a subsidiary of PSA Group in 2017, and later, its successor Stellantis in January 2021, having previously been owned by General Motors since 1925. Vauxhall is one of the oldest established vehicle manufacturers and distribution companies in the United Kingdom. It sells passenger cars, and electric and light commercial vehicles under the Vauxhall marque nationally, and used to sell vans, buses, and trucks under the Bedford Vehicles, Bedford brand. Vauxhall was founded by Alexander Wilson in 1857 as a pump and marine engine manufacturer. It was purchased by Andrew Betts Brown in 1863, who began producing travelling cranes under t ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Morris Motors
Morris Motors Limited was a British privately owned motor vehicle manufacturing company formed in 1919 to take over the assets of William Morris, 1st Viscount Nuffield, William Morris's WRM Motors Limited and continue production of the same vehicles. By 1926 its production represented 42 per cent of British car manufacture—a remarkable expansion rate attributed to William Morris's practice of buying in major as well as minor components and assembling them in his own factory. Although it merged with Austin Motor Company to form the British Motor Corporation... although nearly twenty-five years had elapsed since the BMC merger, not even Austin and Morris, the two volume car manufacturers that formed the core of the original merger, had integrated to a significant degree. Stokes illustrated the immensity of the problem presented by the merger in 1968 by referring to the former Austin and Morris companies having been 'scarcely on speaking terms'. Sixteen years after the formation ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Austin Motor Company
The Austin Motor Company Limited was a British manufacturer of motor vehicles, founded in 1905 by Herbert Austin, 1st Baron Austin, Herbert Austin in Longbridge. In 1952 it was merged with Morris Motors, Morris Motors Limited in the new holding company British Motor Corporation, British Motor Corporation (BMC) Limited, keeping its separate identity. The marque Austin was used until 1987 by BMC's successors British Leyland and Rover Group. The trademark is currently owned by the Chinese firm SAIC Motor, after being transferred from bankrupt subsidiary Nanjing Automobile, Nanjing Automotive which had acquired it with MG Rover Group in July 2005. History 1905–1918: Formation and development While running the The Wolseley Sheep Shearing Machine Company, original Wolseley business, which had a highly cyclical sales pattern, Herbert Austin searched for products with a steady demand. Starting in 1895, he built three cars in his free time. They were among Britain's first cars. Th ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Holden FB
The Holden FB is an automobile produced by Holden in Australia from 1960 to 1961.Holden FB Retrieved from www.uniquecarsandparts.com.au on 15 October 2009 Introduced on 14 January 1960, Retrieved from www.uniquecarsandparts.com.au on 15 October 2009 the FB series replaced the range. Model range The FB range consisted of four-door in two trim levels, five-door ...[...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Holden FC
The Holden FC series is an automobile produced by Holden in Australia from 1958 to 1960. Introduced on 6 May 1958, the FC is a facelifted and improved version of the Holden FE series, which it replaced. Although it is exclusively an Australian design, the styling is reminiscent of a scaled-down North American 1955 Chevrolet. Model range The FC range consisted of four-door sedans in three trim levels, five-door station wagons, marketed as "Station Sedans" in two trim levels, a two-door coupe utility A coupe or coupé (, ) is a passenger car with a sloping or truncated rear roofline and typically with two doors. The term ''coupé'' was first applied to horse-drawn carriages for two passengers without rear-facing seats. It comes from the Fr ... and a three-door panel van. The seven models were:Holden FC sale ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |