|
Grader In Jyväskylä
A grader, also commonly referred to as a road grader, motor grader, or simply blade, is a form of heavy equipment with a long blade used to create a flat surface during grading. Although the earliest models were towed behind horses, and later tractors, most modern graders are self-propelled and thus technically "motor graders". Typical graders have three axles, with the steering wheels in front, followed by the grading blade or mouldboard, then a cab and engine atop tandem rear axles. Some graders also have front-wheel drives for improved performance. Some graders have optional rear attachments, such as a ripper, scarifier, or compactor. A blade forward of the front axle may also be added. For snowplowing and some dirt grading operations, a main blade extension can also be mounted. Capacities range from a blade width of 2.50 to 7.30 m (8 to 24 ft) and engines from 93–373 kW (125–500 hp). Certain graders can operate multiple attachments, or be designed for spe ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Grader 2
A grader, also commonly referred to as a road grader, motor grader, or simply blade, is a form of heavy equipment with a long blade used to create a flat surface during Grading (engineering), grading. Although the earliest models were towed behind horses, and later tractors, most modern graders are self-propelled and thus technically "motor graders". Typical graders have three axles, with the steering wheels in front, followed by the grading blade or mouldboard, then a Cabin (truck), cab and engine atop tandem rear axles. Some graders also have front-wheel drives for improved performance. Some graders have optional rear attachments, such as a bulldozer#Ripper, ripper, scarifier, or compactor. A blade forward of the front axle may also be added. For snowplowing and some dirt grading operations, a main blade extension can also be mounted. Capacities range from a blade width of 2.50 to 7.30 m (8 to 24 ft) and engines from 93–373 kW (125–500 horsepower, hp). Certain gr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Wheel Tractor-scraper
In civil engineering, a wheel tractor-scraper (also known as a land scraper, land leveler, tournapull or simply called a scraper) is a type of heavy equipment used for earthmoving. It has a pan/hopper for loading and carrying material. The pan has a tapered horizontal front cutting edge that cuts into the soil like a carpenter's plane or cheese slicer and fills the hopper which has a movable ejection system. The horsepower of the machine, depth of the cut, type of material, and slope of the cut area affect how quickly the pan is filled. When full, the pan is raised, the apron is closed, and the scraper transports its load to the fill area. There the pan height is set and the lip is opened (the lip is what the bottom edge of the apron is called), so that the ejection system can be engaged for dumping the load. The forward momentum or speed of the machine affects how big an area is covered with the load. A high pan height and slow speed will dump the load over a short dista ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Articulated Vehicle
An articulated vehicle is a vehicle which has a permanent or semi-permanent coupling in its construction. This coupling works as a large pivot joint, allowing it to bend and turn more sharply. There are many kinds, from heavy equipment to Articulated bus, buses, trams and Articulated car, trains. Articulated locomotive, Steam locomotives were sometimes articulated so the driving wheels could pivot around corners. In a broader sense, any vehicle towing a Trailer (vehicle), trailer (including a semi-trailer) could be described as articulated (which comes from the Latin word ''articulus'', "small joint"). In the UK, an ''articulated lorry'' is the combination of a Tractor unit, tractor and a trailer, abbreviated to "artic". In the US, it is called a semi-trailer truck, tractor-trailer or semi-truck and is not necessarily considered articulated. Types Buses Buses are articulated to allow for a much longer bus that can still navigate within the turning radius of a normal bus. Mo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Joystick
A joystick, sometimes called a flight stick, is an input device consisting of a stick that pivots on a base and reports its angle or direction to the device it is controlling. Also known as the control column, it is the principal control device in the cockpit of many civilian and military aircraft, either as a centre stick or side-stick. It has various switches to control functions of the aircraft controlled by the Pilot and First Officer of the flight. Joysticks are often used to control video games, and usually have push-buttons whose state can be read by the computer. A popular variation of the joystick used on modern video game consoles is the analog stick. Joysticks are also used for controlling machines such as cranes, trucks, underwater unmanned vehicles, wheelchairs, surveillance cameras, and Zero-turn mower, zero turning radius lawn mowers. Miniature finger-operated joysticks have been adopted as input devices for smaller electronic equipment such as mobile phones. A ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Steering Wheel
A steering wheel (also called a driving wheel, a hand wheel, or simply wheel) is a type of steering control in vehicles. Steering wheels are used in most modern land vehicles, including all mass-production automobiles, buses, light and heavy trucks, as well as tractors and tanks. The steering wheel is the part of the steering system that the driver manipulates; the rest of the steering system responds to such driver inputs. This can be through direct mechanical contact as in recirculating ball or rack and pinion steering gears, without or with the assistance of hydraulic power steering, HPS, or as in some modern production cars with the help of computer-controlled motors, known as Power steering#Electric systems, electric power steering. History Near the start of the 18th century, many sea vessels appeared using the ship's wheel design. However, historians are unclear when that approach to steering was first used. The first automobiles were steered with a Tiller (automobi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Steering
Steering is the control of the direction of motion or the components that enable its control. Steering is achieved through various arrangements, among them ailerons for airplanes, rudders for boats, cylic tilting of rotors for helicopters, and many more. Aircraft Aircraft flight control systems are normally steered when airborne by the use of ailerons, spoileron, or both to bank the aircraft into a turn; although the rudder can also be used to turn the aircraft, it is usually used to minimize adverse yaw, rather than as a means to directly cause the turn. On the ground, aircraft are generally steered at low speeds by turning the nosewheel or tailwheel (using a tiller or the rudder pedals) or through differential braking, and by the rudder at high speeds. Missiles, airships and large hovercraft are usually steered by a rudder, thrust vectoring, or both. Small sport hovercraft have similar rudders, but steer mostly by the pilot shifting their weight from side to side ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cant (road/rail)
The cant of a Rail transport, railway track or camber angle, camber of a road (also referred to as superelevation, cross slope or cross fall) is the rate of change in elevation (height) between the two rails or edges of the road. This is normally greater where the railway or road is curved; raising the outer rail or the outer edge of the road creates a banked turn, thus allowing vehicles to travel round the curve at greater speeds than would be possible if the surface were level. Rail Superelevation in railway tracks ;Importance of superelevation In curved railway tracks, the outer rail is elevated, providing a banked turn. This allows trains to navigate curves at higher speeds and reduces the pressure of the wheel flanges against the rails, minimizing friction and wear. The difference in elevation between the outer and inner rails is referred to as cant in most countries. ;How superelevation works The main functions of cant are the following: * Improve distribution of th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Foundation (architecture)
In engineering, a foundation is the element of a structure which connects it to the ground or more rarely, water (as with floating structures), transferring loads from the structure to the ground. Foundations are generally considered either shallow or deep. Foundation engineering is the application of soil mechanics and rock mechanics (geotechnical engineering) in the design of foundation elements of structures. Purpose Foundations provide the structure's stability from the ground: * To distribute the weight of the structure over a large area in order to avoid overloading the underlying soil (possibly causing unequal settlement). * To anchor the structure against natural forces including earthquakes, floods, droughts, frost heaves, tornadoes and wind. * To provide a level surface for construction. * To anchor the structure deeply into the ground, increasing its stability and preventing overloading. * To prevent lateral movements of the supported structure (in some cases ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Gravel
Gravel () is a loose aggregation of rock fragments. Gravel occurs naturally on Earth as a result of sedimentation, sedimentary and erosion, erosive geological processes; it is also produced in large quantities commercially as crushed stone. Gravel is classified by grain size, particle size range and includes size classes from granule (geology), granule- to boulder-sized fragments. In the grain size, Udden-Wentworth scale gravel is categorized into granular gravel () and pebble gravel (). ISO 14688 grades gravels as fine, medium, and coarse, with ranges for fine and for coarse. One cubic metre of gravel typically weighs about , or one cubic yard weighs about . Gravel is an important commercial product, with a number of applications. Almost half of all gravel production is used as construction aggregate, aggregate for concrete. Much of the rest is used for road construction, either in the road base or as the road surface (with or without bitumen, asphalt or other binders.) Natu ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Soil
Soil, also commonly referred to as earth, is a mixture of organic matter, minerals, gases, water, and organisms that together support the life of plants and soil organisms. Some scientific definitions distinguish dirt from ''soil'' by restricting the former term specifically to displaced soil. Soil consists of a solid collection of minerals and organic matter (the soil matrix), as well as a porous phase that holds gases (the soil atmosphere) and water (the soil solution). Accordingly, soil is a three- state system of solids, liquids, and gases. Soil is a product of several factors: the influence of climate, relief (elevation, orientation, and slope of terrain), organisms, and the soil's parent materials (original minerals) interacting over time. It continually undergoes development by way of numerous physical, chemical and biological processes, which include weathering with associated erosion. Given its complexity and strong internal connectedness, soil ecologists ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Road Surface
A road surface (British English) or pavement (North American English) is the durable surface material laid down on an area intended to sustain vehicular or foot traffic, such as a road or walkway. In the past, gravel road surfaces, macadam, hoggin, cobblestone and granite setts were extensively used, but these have mostly been replaced by asphalt or concrete laid on a compacted base course. Asphalt mixtures have been used in pavement construction since the beginning of the 20th century and are of two types: metalled (hard-surfaced) and unmetalled roads. Metalled roadways are made to sustain vehicular load and so are usually made on frequently used roads. Unmetalled roads, also known as gravel roads or dirt roads, are rough and can sustain less weight. Road surfaces are frequently marked to guide traffic. Today, permeable paving methods are beginning to be used for low-impact roadways and walkways to prevent flooding. Pavements are crucial to countries such as United St ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Base Course
The base course or basecourse in pavements is a layer of material in an asphalt roadway, race track, riding arena, or sporting field. It is located under the surface layer consisting of the '' wearing course'' and sometimes an extra ''binder course''. If there is a sub-base course, the base course is constructed directly above this layer. Otherwise, it is built directly on top of the subgrade. Typical base course thickness ranges from and is governed by underlying layer properties. Generally made of a construction aggregate, it is spread and compacted to at least 95% relative compaction, thus providing a stable foundation for additional layers of material. Aggregate base (AB) is typically a mix of different sizes of crushed rock '' Aggregate Base, Class 2'', is used in roadways and consists of rock particles of size and less. An aggregate is normally made from newly quarried rock, or it is sometimes allowed to be made from recycled asphalt concrete and/or Portland cement concr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
