|
Dunlop Valve
The Dunlop valve, (abbreviated as DV; also called a Woods valve, an English valve or a Blitz valve) is a type of pneumatic valve stem in use—mostly on inner tubes of bicycles—in many countries, including Japan, Korea, India, Pakistan, Sri Lanka, most European countries, and a number of developing countries. The Dunlop valve has a wider base than a Presta valve, similar enough in size to a Schrader valve to use identically drilled valve holes in rims, but it can be inflated with a Presta valve adapter. The inner mechanism of the valve can be replaced easily, without the need for special tools. The Dunlop valve originally used a tight rubber sleeve (see illustration of "original plug") which had to be forced open by air pressure while pumping (not only were these difficult to inflate, but the rubber would perish over time, allowing leakage and eventually, complete failure), but modern Dunlop valves use a different plug (core) using either an internal ball bearing or a spring- ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Valve Stem
A valve stem is a self-contained valve that opens to admit gas to a chamber (such as air to inflate a tire), and is then automatically closed and kept sealed by the pressure in the chamber, or a spring (device), spring, or both, to prevent the gas from escaping. There are many types of valves, and they are most commonly used on Tire, automobile, Motorcycle tire, motorcycle, and bicycle tires, but also for many other applications. The most common type is the Schrader valve, but some road bicycles with skinny tires instead use the Presta valve. Schrader Schrader valves consist of a valve stem into which a poppet valve is threaded with a spring attached. They are used on virtually all automobile and motorbike tires and on wider-rimmed bicycle tires. In addition to tires, Schrader valves of varying diameters are used in refrigeration and Air conditioning, air conditioning systems, plumbing, Fuel injection, engine fuel injection, Car suspension, suspension systems, and SCUBA Divin ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Developing Country
A developing country is a sovereign state with a less-developed industrial base and a lower Human Development Index (HDI) relative to developed countries. However, this definition is not universally agreed upon. There is also no clear agreement on which countries fit this category. The terms low-and middle-income country (LMIC) and newly emerging economy (NEE) are often used interchangeably but they refer only to the economy of the countries. The World Bank classifies the world's economies into four groups, based on gross national income per capita: high-, upper-middle-, lower-middle-, and low-income countries. Least developed countries, landlocked developing countries, and small island developing states are all sub-groupings of developing countries. Countries on the other end of the spectrum are usually referred to as high-income countries or developed countries. There are controversies over the terms' use, as some feel that it perpetuates an outdated concept of "us" and ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Presta Valve
The Presta valve (also French valve (FV) or Sclaverand valve) is a type of tire valve commonly found on high pressure bicycle inner tubes and is commonly used on tubeless setups. It consists of an outer valve stem and an inner valve body. A lock nut to secure the stem at the wheel rim and a valve cap may also be present. Name The '' Sclaverand valve'' was invented by Frenchman Etienne Sclaverand and is often referred to as the ''French valve''. Today it is also known as ''Presta valve''. ''Presta'' or ''presto'' stands in the Romance languages for "fast, hurry, immediately". Description The outer valve stem is manufactured in various lengths to cater for the different depths of the wheel or rim. It is recommended the valve stem is to be at least 10 mm longer than the rim is deep to allow adequate room for the bicycle pump to be attached. It has a narrower diameter of , compared to Dunlop and Schrader valves, measuring . The weakest point of a bicycle rim is usually ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Schrader Valve
The Schrader valve (also called American valve (AV)) is a type of pneumatic tire valve used on virtually every motor vehicle in the world today. The original Schrader valve design was invented in 1891 and patented in the United States in 1893.George H.F. Schrader"Valve," (filed: January 9, 1893; issued: April 11, 1893). The Schrader valve consists of a valve stem into which a valve core is threaded. The valve core is a poppet valve assisted by a spring. A small rubber seal located on the core keeps the fluid from escaping through the threads. Using the appropriate tools, a faulty valve core can be immediately extracted from the valve stem and replaced with a new one. History August Schrader was a German-American inventor and businessman. In 1844, he opened the Schrader company, a shop dealing in rubber products in Manhattan, New York City. In 1845, he began supplying fittings and valves for rubber products made by the Goodyear brothers, including air pillows and life p ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
John Boyd Dunlop
John Boyd Dunlop (5 February 1840 – 23 October 1921) was a Scottish people, Scottish inventor and veterinary surgeon who spent most of his career in Ireland. Familiar with making Natural rubber, rubber devices, he invented the first practical Tire, pneumatic tyres for his child's tricycle and developed them for use in cycle racing. He sold his rights to the pneumatic tyres to a company he formed with the president of the Irish Cyclists' Association, Harvey du Cros, for a small cash sum and a small shareholding in their pneumatic tyre business. Dunlop withdrew in 1896. The company that bore his name, Dunlop Pneumatic Tyre Company, was not incorporated until later and, despite its name, was Du Cros's creation. Veterinary practice He was born on a farm in Dreghorn, North Ayrshire, and studied to be a veterinary surgeon at the Dick Vet, University of Edinburgh, moving to Downpatrick, Ireland now in Northern Ireland, in 1867. Quite early in his life he was told he had been a prem ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Screw Thread
A screw thread is a helical structure used to convert between rotational and linear movement or force. A screw thread is a ridge wrapped around a cylinder or cone in the form of a helix, with the former being called a ''straight'' thread and the latter called a ''tapered'' thread. A screw thread is the essential feature of the screw as a simple machine and also as a threaded fastener. The mechanical advantage of a screw thread depends on its ''lead'', which is the linear distance the screw travels in one revolution. In most applications, the lead of a screw thread is chosen so that friction is sufficient to prevent linear motion being converted to rotary, that is so the screw does not slip even when linear force is applied, as long as no external rotational force is present. This characteristic is essential to the vast majority of its uses. The tightening of a fastener's screw thread is comparable to driving a wedge into a gap until it sticks fast through friction and slight ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Metric Screw Thread
The ISO metric screw thread is the most commonly used type of general-purpose screw thread worldwide. They were one of the first international standards agreed when the International Organization for Standardization (ISO) was set up in 1947. The "M" designation for metric screws indicates the nominal outer diameter of the screw thread, in millimetres. This is also referred to as the "major" diameter in the information below. It indicates the diameter of smooth-walled hole that an externally threaded component (e.g. on a bolt) will pass through easily to connect to an internally threaded component (e.g. a nut) on the other side. For example, an M6 screw has a nominal outer diameter of 6 millimetres and will therefore be a well-located, co-axial fit in a hole drilled to 6 mm diameter. Basic profile The design principles of ISO general-purpose metric screw threads ("M" series threads) are defined in international standard ISO 68-1. Each thread is characterized by its ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Dunlop Rubber
Dunlop Ltd. (formerly Dunlop Rubber) was a British multinational company involved in the manufacture of various natural rubber goods. Its business was founded in 1889 by Harvey du Cros and he involved John Boyd Dunlop who had re-invented and developed the first pneumatic tyre: he invented the first practical pneumatic tyres for his child's tricycle. It was one of the first multinationals, and under du Cros and, after him, under Eric Geddes, grew to be one of the largest British industrial companies. J. B. Dunlop had dropped any ties to it well before his name was used for any part of the business. The business and manufactory was founded in Upper Stephen Street, Dublin. A plaque marks the site, which is now part of the head office of the Irish multinational departments store brand, Dunnes Stores. Dunlop Rubber failed to adapt to evolving market conditions in the 1970s, despite having recognised by the mid-1960s the potential drop in demand as the more durable radial tyres s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bicycle Tire
A bicycle tire is a tire that fits on the Bicycle wheel, wheel of a bicycle or similar vehicle. These tires may also be used on tricycles, wheelchairs, and handcycles, frequently for Wheelchair racing, racing. Bicycle tires provide an important source of Bicycle suspension, suspension, generate the lateral forces necessary for Bicycle and motorcycle dynamics#Balance, balancing and Bicycle and motorcycle dynamics#Turning, turning, and generate the longitudinal forces necessary for Vehicle propulsion, propulsion and Bicycle brake systems, braking. Although the use of a pneumatic tire greatly reduces rolling resistance compared to the use of a rigid wheel or solid tire, the tires are still typically the second largest source, after Drag (physics), wind resistance (air drag), of power consumption on a level road. The modern detachable pneumatic bicycle tire contributed to the popularity and eventual dominance of the safety bicycle. Bicycle tires are also used on unicycles, tricyc ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Inner Tube
An inner tube is an inflatable torus that forms the interior of some pneumatic tires. The tube is inflated through a valve stem and fits inside the tire casing. The inflated inner tube provides structural support and suspension, while the outer tire offers grip and protects the more fragile tube. Use Nowadays, most bicycle tires use inner tubes. They are also used in items such as dolly carts, wheelbarrows, and many motorcycles. In the past, car tires used inner tubes, but most cars now use tubeless tires that hold air without an inner tube. Tubeless tires offer advantages, as they can operate at both low and high pressures without the risk of pinching or bursting, unlike tube tires. Large inner tubes are used for various recreational activities, such as flotation devices in tubing. History Inner tubes were invented in the 1800s for use with pneumatic tires, as standard wheels at the time were not air-filled, making them uncomfortable to ride on. Over the years, inner ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bicycle Parts
List of bicycle parts by alphabetic order: * Axle: as in the generic definition, a rod that serves to attach a wheel to a bicycle and provides support for bearings on which the wheel rotates, for example a through-axle or an axle made for a quick release skewer. Also sometimes used to describe suspension components, for example a swing arm pivot axle * Bar ends: extensions at the end of straight handlebars to allow for multiple hand positions * Bicycle handlebar#Plugs, Bar plugs or end caps: plugs for the ends of handlebars * Bicycle basket, Basket: it is an optional attachment on a bike and is used for carrying things * Bearing (mechanical), Bearing: a device that facilitates rotation by reducing friction * Bicycle bell, Bell: an audible device for warning pedestrians and other cyclists * Belt-driven bicycle, Belt-drive: alternative to chain-drive * Bicycle brake cable: see Cable * Bottle cage: a holder for a water bottle * Bottom bracket: The bearing system that the pedals (a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
