|
DHCP
The Dynamic Host Configuration Protocol (DHCP) is a network management protocol used on Internet Protocol (IP) networks for automatically assigning IP addresses and other communication parameters to devices connected to the network using a client–server architecture. The technology eliminates the need for individually configuring network devices manually, and consists of two network components, a centrally installed network DHCP server and client instances of the protocol stack on each computer or device. When connected to the network, and periodically thereafter, a client requests a set of parameters from the server using DHCP. DHCP can be implemented on networks ranging in size from residential networks to large campus networks and regional ISP networks. Many routers and residential gateways have DHCP server capability. Most residential network routers receive a unique IP address within the ISP network. Within a local network, a DHCP server assigns a local IP addres ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
DHCPv6
The Dynamic Host Configuration Protocol version 6 (DHCPv6) is a network protocol for configuring Internet Protocol version 6 (IPv6) hosts with IP addresses, IP prefixes, default route, local segment MTU, and other configuration data required to operate in an IPv6 network. It is not just the IPv6 equivalent of the Dynamic Host Configuration Protocol for IPv4. IPv6 hosts may automatically generate IP addresses internally using stateless address autoconfiguration (SLAAC), or they may be assigned configuration data with DHCPv6, or both. IPv6 hosts that use stateless autoconfiguration may need information other than what SLAAC provides on a given network. DHCPv6 can provide this information whether it is being used to assign IP addresses or not. DHCPv6 can provide host with the addresses of Domain Name System (DNS) servers, but they can also be provided through Neighbor Discovery Protocol, which is the mechanism for stateless autoconfiguration. Many IPv6 routers, such as routers f ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Web Proxy Autodiscovery Protocol
The Web Proxy Auto-Discovery (WPAD) Protocol is a method used by clients to locate the URL of a configuration file using DHCP and/or DNS discovery methods. Once detection and download of the configuration file is complete, it can be executed to determine the proxy for a specified URL. History The WPAD protocol only outlines the mechanism for discovering the location of this file, but the most commonly deployed configuration file format is the proxy auto-config format originally designed by Netscape in 1996 for Netscape Navigator 2.0. The WPAD protocol was drafted by a consortium of companies including Inktomi Corporation, Microsoft Corporation, RealNetworks, Inc., and Sun Microsystems, Inc. (now Oracle Corp.). WPAD is documented in an INTERNET-DRAFT which expired in December 1999. However, WPAD is still supported by all major browsers. WPAD was first included with Internet Explorer 5.0. Context In order for all browsers in an organization to be supplied the same proxy poli ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
IP Address
An Internet Protocol address (IP address) is a numerical label such as that is assigned to a device connected to a computer network that uses the Internet Protocol for communication. IP addresses serve two main functions: network interface identification, and location addressing. Internet Protocol version 4 (IPv4) was the first standalone specification for the IP address, and has been in use since 1983. IPv4 addresses are defined as a 32-bit number, which became too small to provide enough addresses as the internet grew, leading to IPv4 address exhaustion over the 2010s. Its designated successor, IPv6, uses 128 bits for the IP address, giving it a larger address space. Although IPv6 deployment has been ongoing since the mid-2000s, both IPv4 and IPv6 are still used side-by-side . IP addresses are usually displayed in a human-readable notation, but systems may use them in various different computer number formats. CIDR notation can also be used to designate how much ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Prefix Delegation
IP networks are divided logically into subnetworks. Computers in the same subnetwork have the same address prefix. For example, in a typical home network with legacy Internet Protocol version 4, the network prefix would be something like 192.168.1.0/24, as expressed in CIDR notation. With IPv4, commonly home networks use private addresses (defined in ) that are non-routable on the public Internet and use address translation to convert to routable addresses when connecting to hosts outside the local network. Business networks typically had manually provisioned subnetwork prefixes. In IPv6 global addresses are used end-to-end, so even home networks may need to distribute public, routable IP addresses to hosts. Since it would not be practical to manually provision networks at scale, in IPv6 networking, DHCPv6 prefix delegation (; § 6.3) is used to assign a network address prefix and automate configuration and provisioning of the public routable addresses for the network. In the ty ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bootstrap Protocol
The Bootstrap Protocol (BOOTP) is a computer networking protocol used in Internet Protocol networks to automatically assign an IP address to network devices from a configuration server. The BOOTP was originally defined in published in 1985. While some parts of BOOTP have been effectively superseded by the Dynamic Host Configuration Protocol (DHCP), which adds the feature of leases, parts of BOOTP are used to provide service to the DHCP protocol. Some DHCP servers also provide the legacy BOOTP functionality. When a network-connected computer boots up, its IP stack broadcasts BOOTP network messages requesting an IP address assignment. A BOOTP configuration server replies to the request by assigning an IP address from a pool of addresses, which is preconfigured by an administrator. BOOTP is implemented using the User Datagram Protocol (UDP) for transport. Port number 67 is used by the server for receiving client requests, and port number 68 is used by the client for receiving s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
IPv6
Internet Protocol version 6 (IPv6) is the most recent version of the Internet Protocol (IP), the communication protocol, communications protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. IPv6 was developed by the Internet Engineering Task Force (IETF) to deal with the long-anticipated problem of IPv4 address exhaustion, and was intended to replace IPv4. In December 1998, IPv6 became a Draft Standard for the IETF, which subsequently ratified it as an Internet Standard on 14 July 2017. Devices on the Internet are assigned a unique IP address for identification and location definition. With the rapid growth of the Internet after commercialization in the 1990s, it became evident that far more addresses would be needed to connect devices than the 4,294,967,296 (232) IPv4 address space had available. By 1998, the IETF had formalized the successor protocol, IPv6 which uses 128-bit addresses, theoretically all ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Stateless Address Autoconfiguration
An Internet Protocol version 6 address (IPv6 address) is a numeric label that is used to identify and locate a network interface of a computer or a network node participating in a computer network using IPv6. IP addresses are included in the packet header to indicate the source and the destination of each packet. The IP address of the destination is used to make decisions about routing IP packets to other networks. IPv6 is the successor to the first addressing infrastructure of the Internet, Internet Protocol version 4 (IPv4). In contrast to IPv4, which defined an IP address as a 32-bit value, IPv6 addresses have a size of 128 bits. Therefore, in comparison, IPv6 has a vastly enlarged address space. Addressing methods IPv6 addresses are classified by the primary addressing and routing methodologies common in networking: unicast addressing, anycast addressing, and multicast addressing. A unicast address identifies a single network interface. The Internet Protocol delivers pac ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Router (computing)
A router is a computer and networking device that Packet forwarding, forwards data packets between computer networks, including internetworks such as the global Internet. Routers perform the "traffic directing" functions on the Internet. A router is connected to two or more data lines from different IP networks. When a data packet comes in on a line, the router reads the network address information in the packet header to determine the ultimate destination. Then, using information in its routing table or routing policy, it directs the packet to the next network on its journey. Data packets are forwarded from one router to another through an internetwork until it reaches its destination Node (networking), node. The most familiar type of Internet Protocol, IP routers are Residential gateway, home and small office routers that forward IP packet (other), IP packets between the home computers and the Internet. More sophisticated routers, such as enterprise routers, conne ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Internet Protocol Version 4
Internet Protocol version 4 (IPv4) is the first version of the Internet Protocol (IP) as a standalone specification. It is one of the core protocols of standards-based internetworking methods in the Internet and other packet-switched networks. IPv4 was the first version deployed for production on SATNET in 1982 and on the ARPANET in January 1983. It is still used to route most Internet traffic today, even with the ongoing deployment of Internet Protocol version 6 (IPv6), its successor. IPv4 uses a 32-bit address space which provides 4,294,967,296 (232) unique addresses, but large blocks are reserved for special networking purposes. Purpose The Internet Protocol ("IP") is the protocol that defines and enables internetworking at the internet layer of the Internet Protocol Suite. It gives the Internet a global-scale logical addressing system which allows the routing of IP data packets from a source host to the next router that is one hop closer to the intended destination h ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Residential Gateway
A residential gateway is a small consumer-grade gateway which bridges network access between connected local area network (LAN) hosts to a wide area network (WAN) (such as the Internet) via a modem, or directly connects to a WAN (as in EttH), while routing. The WAN is a larger computer network, generally operated by an Internet service provider. History The term residential gateway was popularized by Clifford Holliday in 1997 through his paper entitled "The residential gateway". Devices Multiple devices have been described as ''residential gateways'': * Cable modem * DSL modem * FTTx modem * IP-DECT telephone (base station) * Network switch * Smart home hub * TV/ VoD set-top box * Voice over Internet protocol (VoIP) analog telephone adapter * Wired router * Wireless access point * Wireless router A modem (e.g. DSL modem, cable modem) by itself provides none of the functions of a router. It merely allows ATM or PPP or PPPoE traffic to be transmitted acro ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Reverse Address Resolution Protocol
The Reverse Address Resolution Protocol (RARP) is an obsolete computer communication protocol used by a client computer to request its Internet Protocol (IPv4) address from a computer network, when all it has available is its link layer or hardware address, such as a MAC address. The client broadcasts the request and does not need prior knowledge of the network topology or the identities of servers capable of fulfilling its request. RARP has been rendered obsolete by the Bootstrap Protocol (BOOTP) and the modern Dynamic Host Configuration Protocol (DHCP), which both support a much greater feature set than RARP. RARP requires one or more server hosts to maintain a database of mappings of link layer addresses to their respective protocol addresses. MAC addresses need to be individually configured on the servers by an administrator. RARP is limited to serving only IP addresses. Reverse ARP differs from the Inverse Address Resolution Protocol (InARP), which is designed to obtain th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Domain Name
In the Internet, a domain name is a string that identifies a realm of administrative autonomy, authority, or control. Domain names are often used to identify services provided through the Internet, such as websites, email services, and more. Domain names are used in various networking contexts and for application-specific naming and addressing purposes. In general, a domain name identifies a network domain or an Internet Protocol (IP) resource, such as a personal computer used to access the Internet, or a server computer. Domain names are formed by the rules and procedures of the Domain Name System (DNS). Any name registered in the DNS is a domain name. Domain names are organized in subordinate levels ('' subdomains'') of the DNS root domain, which is nameless. The first-level set of domain names are the ''top-level domains'' (TLDs), including the ''generic top-level domains'' (gTLDs), such as the prominent domains com, info, net, edu, and org, and the ''country code t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
