Windmill (sailing dinghy)
   HOME

TheInfoList



OR:

The Windmill is an American
sailing dinghy Dinghy sailing is the activity of sailing small boats by using five essential controls: * the sails * the foils (i.e. the daggerboard or centreboard and rudder and sometimes lifting foils as found on the Moth) * the trim (forward/rear angle of ...
that was designed by Clark Mills as a one-design racer and first built in 1953.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 58-59.
Houghton Mifflin Company Houghton Mifflin Harcourt (; HMH) is an American publisher of textbooks, instructional technology materials, assessments, reference works, and fiction and non-fiction for both young readers and adults. The company is based in the Boston Financ ...
, 1994.
The Windmill hull design was developed into the US1 single-handed
catboat A catboat (alternate spelling: cat boat) is a sailboat with a single sail on a single mast set well forward in the bow of a very beamy and (usually) shallow draft hull. Typically they are gaff rigged, though Bermuda rig is also used. Most are f ...
in 1974.


Production

Originally intended to be amateur-constructed from four sheets of
plywood Plywood is a material manufactured from thin layers or "plies" of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. It is an engineered wood from the family of manufactured ...
, the boat was also commercially manufactured from
fiberglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cloth ...
. The design was built by Johannsen Boat Works, Lockley Newport Boats and Advance Sailboat Corp. in the
United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...
, but it is now out of production. A total of 5700 examples of the type have been completed.


Design

The Windmill is a recreational
sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...
, built predominantly of plywood or fiberglass in the form of a double hull with a foam core, resulting in an unsinkable boat. It has a fractional
sloop A sloop is a sailboat with a single mast typically having only one headsail in front of the mast and one mainsail aft of (behind) the mast. Such an arrangement is called a fore-and-aft rig, and can be rigged as a Bermuda rig with triangular sa ...
rig with
aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It has ...
spars. The boat and is sailed only with a
jib A jib is a triangular sail that sets ahead of the foremast of a sailing vessel. Its tack is fixed to the bowsprit, to the bows, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main types of headsails ...
and
mainsail A mainsail is a sail rigged on the main mast of a sailing vessel. * On a square rigged vessel, it is the lowest and largest sail on the main mast. * On a fore-and-aft rigged vessel, it is the sail rigged aft of the main mast. The sail's foot ...
, no
spinnaker A spinnaker is a sail designed specifically for sailing off the wind on courses between a reach (wind at 90° to the course) to downwind (course in the same direction as the wind). Spinnakers are constructed of lightweight fabric, usually n ...
and no
trapeze A trapeze is a short horizontal bar hung by ropes or metal straps from a ceiling support. It is an aerial apparatus commonly found in circus performances. Trapeze acts may be static, spinning (rigged from a single point), swinging or flying, an ...
. The hull has a rounded
plumb stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...
, a conventional
transom Transom may refer to: * Transom (architecture), a bar of wood or stone across the top of a door or window, or the window above such a bar * Transom (nautical), that part of the stern of a vessel where the two sides of its hull meet * Operation Tran ...
, a transom-hung
rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...
controlled by a
tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. ...
and a retractable
daggerboard A daggerboard is a retractable centreboard used by various sailing craft. While other types of centreboard may pivot to retract, a daggerboard slides in a casing. The shape of the daggerboard converts the forward motion into a windward lift, cou ...
. It displaces , The boat has a
draft Draft, The Draft, or Draught may refer to: Watercraft dimensions * Draft (hull), the distance from waterline to keel of a vessel * Draft (sail), degree of curvature in a sail * Air draft, distance from waterline to the highest point on a vessel ...
of with the daggerboard extended and with it retracted, allowing beaching or ground transportation on a trailer or car roof rack. For sailing the design is equipped with jib and mainsail windows for visibility. It also has an internal 2:1
mechanical advantage Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. The device trades off input forces against movement to obtain a desired amplification in the output force. The model for t ...
outhaul An outhaul is a control line found on a sailboat. It is an element of the running rigging, used to attach the mainsail Parts of a sail#Corners, clew to the boom (sailing), boom and tensions the Sail components#Edges, foot of the sail. It commonly ...
, a 4:1
boom vang A boom vang (US) or kicking strap (UK) (often shortened to "vang" or "kicker") is a line or piston system on a sailboat used to exert downward force on the boom and thus control the shape of the sail. The Collins English Dictionary defines it as ...
controlled by the boat's skipper and a 4:1
Cunningham Cunningham is a surname of Scottish origin, see Clan Cunningham. Notable people sharing this surname A–C *Aaron Cunningham (born 1986), American baseball player *Abe Cunningham, American drummer * Adrian Cunningham (born 1960), Australian ...
. The boat has adjustable jib fairleads and a
mainsheet traveler A traveller is a part of the rigging of a boat or ship that provides a moving attachment point for a rope, sail or yard to a fixed part of the vessel. It may take the form of anything from a simple ring on a metal bar or a spar to, especially in a ...
, plus an Elvstrom bailer. The design has a
Portsmouth Yardstick The Portsmouth Yardstick (PY) or Portsmouth handicap scheme is a term used for a number of related systems of empirical handicapping used primarily in small sailboat racing. The handicap is applied to the time taken to sail any course, and the han ...
racing average handicap of 90.2 and is normally raced with a crew of two
sailor A sailor, seaman, mariner, or seafarer is a person who works aboard a watercraft as part of its crew, and may work in any one of a number of different fields that are related to the operation and maintenance of a ship. The profession of the s ...
s.


Operational history

In a 1994 review Richard Sherwood wrote, "the Windmill is a high-performance sloop that can be built from plans or from a kit, or purchased complete. She is very light and planes quickly. Class rules are strict, and neither spinnakers nor trapezes are allowed. With a double hull and closed-cell foam, the boat is unsinkable. This type of construction also results in a very rigid boat." The boat is supported by an active class club, the Windmill Class Association.


Events


See also

*
List of sailing boat types The following is a partial list of sailboat types and sailing classes, including keelboats, dinghies and multihull ( catamarans and trimarans). Olympic classes World Sailing Classes Historically known as the IYRU (International Yacht Racing ...
Related development * US1


References


External links

* {{Sailing dinghies and skiffs Windmill (sailing dinghy)