The Teman Mono-Fly is an American

ultralight aircraft Ultralight aviation (called microlight aviation in some countries) is the flying of lightweight, 1- or 2-seat fixed-wing aircraft. Some countries differentiate between weight-shift control and conventional three-axis control aircraft with ailer ...

that was designed by

structural engineer Structural engineers analyze, design, plan, and research structural components and structural systems to achieve design goals and ensure the safety and comfort of users or occupants. Their work takes account mainly of safety, technical, economic ...

Bob Teman and produced by Teman Aircraft Inc. The aircraft was supplied as a kit for amateur construction and later as a factory-completed aircraft.Cliche, Andre: ''Ultralight Aircraft Shopper's Guide'' 8th Edition, page E-26. Cybair Limited Publishing, 2001.

Design and development

The Mono-Fly was designed to comply with the US

FAR 103 Ultralight Vehicles Ultralight aircraft in the United States are much smaller and lighter than ultralight aircraft as defined by all other countries. In the United States, ultralights are described as "ultralight vehicles" and not as aircraft. They are not requ ...

rules, including the category's maximum empty weight of . The aircraft has a standard empty weight of . It features a

strut-braced In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...

high-wing A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes. A monoplane has inherently the highest efficiency and lowest drag of any wing confi ...

, a single-seat, open cockpit,

tricycle landing gear Tricycle gear is a type of aircraft undercarriage, or ''landing gear'', arranged in a tricycle fashion. The tricycle arrangement has a single nose wheel in the front, and two or more main wheels slightly aft of the center of gravity. Tricycle g ...

and a single engine in

pusher configuration In an aircraft with a pusher configuration (as opposed to a tractor configuration), the propeller(s) are mounted behind their respective engine(s). Since a pusher propeller is mounted behind the engine, the drive shaft is in compression in nor ...

. The aircraft is made from

aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It has ...

tubing that is

pop rivet A rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite to the head is called the ''tail''. On installation, the rivet is placed in a punched o ...

ed together using gussets. On early examples the flying surfaces were covered in dope and

aircraft fabric covering Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as ar ...

, but this was later changed to heat-shrunk

Dacron Polyethylene terephthalate (or poly(ethylene terephthalate), PET, PETE, or the obsolete PETP or PET-P), is the most common thermoplastic polymer resin of the polyester family and is used in fibres for clothing, containers for liquids and foods ...

sailcloth, to save weight. Its span wing employs a modified

Clark Y Clark Y is the name of a particular airfoil profile, widely used in general purpose aircraft designs, and much studied in aerodynamics over the years. The profile was designed in 1922 by Virginius E. Clark using thickness distribution of the Germa ...

airfoil An airfoil (American English) or aerofoil (British English) is the cross-sectional shape of an object whose motion through a gas is capable of generating significant lift, such as a wing, a sail, or the blades of propeller, rotor, or turbine. ...

. The wings are supported by a single lift strut and a

jury strut In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in c ...

. The pilot is accommodated on an open seat, without a windshield. The controls are conventional three axis, but the aircraft uses a control yoke rather than the more common

control stick A joystick, sometimes called a flight stick, is an input device consisting of a stick that pivots on a base and reports its angle or direction to the device it is controlling. A joystick, also known as the control column, is the principal cont ...

. The

landing gear Landing gear is the undercarriage of an aircraft or spacecraft that is used for takeoff or landing. For aircraft it is generally needed for both. It was also formerly called ''alighting gear'' by some manufacturers, such as the Glenn L. Martin ...

features main wheel bungee suspension. Early kit-built examples came out with empty weights too high for the FAR Part 103 limit, so the factory stopped supplying kits and produced completed aircraft instead. These factory-built examples have empty weights under , even when equipped with a Rotax 503 engine of . An Onan four stroke industrial engine was also used, although this limited the rate of climb to 400 ft/min (2.0 m/s). Reviewer Andre Cliche described the Mono-Fly as "well engineered". It is stressed to +10/-10 g.

Specifications (version)

References

{{reflist

External links

Photo of a Mono-Fly with cockpit fairing fitted
1980s United States ultralight aircraft Homebuilt aircraft Single-engined pusher aircraft