Tecnam Snap
   HOME

TheInfoList



OR:

The Tecnam Snap is an Italian
aerobatic Aerobatics is the practice of flying maneuvers involving aircraft attitudes that are not used in conventional passenger-carrying flights. The term is a portmanteau of "aerial" and "acrobatics". Aerobatics are performed in aeroplanes and glid ...
ultralight aircraft Ultralight aviation (called microlight aviation in some countries) is the flying of lightweight, 1- or 2-seat fixed-wing aircraft. Some countries differentiate between weight-shift control and conventional three-axis control aircraft with ailer ...
, designed by Fabio Russo and produced by
Tecnam Costruzioni Aeronautiche Tecnam is an Italian aeronautics manufacturer. It was founded in 1986. The company has two primary activities: producing aircraft components for various other manufacturers, and manufacturing its own range of light ai ...
of
Casoria Casoria (; nap, Casòria) is a ''comune'' (municipality) in the Metropolitan City of Naples in the Italian region Campania, located about northeast of Naples. Casoria borders the following municipalities: Afragola, Arzano, Cardito, Casalnuovo d ...
,
Metropolitan City of Naples The Metropolitan City of Naples ( it, Città metropolitana di Napoli) is an Italian metropolitan city in Campania region, established on 1 January 2015. Its capital city is Naples; within the city there are 92 comunes (municipalities). It was ...
, introduced at the
AERO Friedrichshafen AERO Friedrichshafen is a trade show dedicated to European general aviation. It is held yearly in April on the shores of Lake Constance at the exhibition center of Friedrichshafen, Germany right next to Friedrichshafen Airport Friedrichshaf ...
show in 2013. The aircraft was intended to be supplied complete and ready-to-fly.Tacke, Willi; Marino Boric; et al: ''World Directory of Light Aviation 2015-16'', page 83. Flying Pages Europe SARL, 2015. The design is derived from the
Dallair Aeronautica FR-100 Snap! The Dallair Aeronautica FR-100 Snap! is a homebuilt aerobatic aircraft that can be certified in multiple categories. Design and development The Snap! is imported to the United States and may be certified as an Experimental-Exhibition model, S- ...
, which was originally built by Dallair, a Tecnam subcontractor, but Tecnam took over production in 2013.


Design and development

The Snap was designed as a low-cost aerobatic aircraft wit a high
power to weight ratio Power-to-weight ratio (PWR, also called specific power, or power-to-mass ratio) is a calculation commonly applied to engines and mobile power sources to enable the comparison of one unit or design to another. Power-to-weight ratio is a measuremen ...
, to comply with the
Fédération Aéronautique Internationale The (; FAI; en, World Air Sports Federation) is the world governing body for air sports, and also stewards definitions regarding human spaceflight. It was founded on 14 October 1905, and is headquartered in Lausanne, Switzerland. It maintai ...
microlight rules. It features a cantilever
low-wing A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes. A monoplane has inherently the highest efficiency and lowest drag of any wing confi ...
, a single-seat under a
bubble canopy A bubble canopy is an aircraft canopy constructed without bracing, for the purpose of providing a wider unobstructed field of view to the pilot, often providing 360° all-round visibility. The designs of bubble canopies can drastically vary; so ...
, fixed
conventional landing gear Conventional landing gear, or tailwheel-type landing gear, is an aircraft undercarriage consisting of two main wheels forward of the center of gravity and a small wheel or skid to support the tail.Crane, Dale: ''Dictionary of Aeronautical Term ...
and a single engine in
tractor configuration In aviation, the term tractor configuration refers to an aircraft constructed in the standard configuration with its engine mounted with the propeller in front of it so that the aircraft is "pulled" through the air. Oppositely, the pusher c ...
. The aircraft is made with a welded
4130 steel 41xx steel is a family of SAE steel grades, as specified by the Society of Automotive Engineers (SAE). Alloying elements include chromium and molybdenum, and as a result these materials are often informally referred to as chromoly steel (common ...
tubing
fuselage The fuselage (; from the French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds crew, passengers, or cargo. In single-engine aircraft, it will usually contain an engine as well, although in some amphibious aircraft t ...
, with
aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It has ...
sheet for the wings,
elevators An elevator or lift is a cable-assisted, hydraulic cylinder-assisted, or roller-track assisted machine that vertically transports people or freight between floors, levels, or decks of a building, vessel, or other structure. They are ...
and
fin A fin is a thin component or appendage attached to a larger body or structure. Fins typically function as foils that produce lift or thrust, or provide the ability to steer or stabilize motion while traveling in water, air, or other fluids. Fin ...
structures. The
rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...
,
aileron An aileron (French for "little wing" or "fin") is a hinged flight control surface usually forming part of the trailing edge of each wing of a fixed-wing aircraft. Ailerons are used in pairs to control the aircraft in roll (or movement around ...
s,
engine cowling A cowling is the removable covering of a vehicle's engine, most often found on automobiles, motorcycles, airplanes, and on outboard boat motors. On airplanes, cowlings are used to reduce drag and to cool the engine. On boats, cowlings are a cove ...
and fuselage covering are made from
composite material A composite material (also called a composition material or shortened to composite, which is the common name) is a material which is produced from two or more constituent materials. These constituent materials have notably dissimilar chemical or ...
s, while the lower fuselage tailcone is covered in doped
aircraft fabric Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as are ...
. Its span wing has an area of . The
tailplane A tailplane, also known as a horizontal stabiliser, is a small lifting surface located on the tail (empennage) behind the main lifting surfaces of a fixed-wing aircraft as well as other non-fixed-wing aircraft such as helicopters and gyroplane ...
is mounted low and the ailerons have spades fitted. Standard engines available are the
Rotax 912ULS The Rotax 912 is a horizontally-opposed four-cylinder, naturally aspirated, four-stroke aircraft engine with a reduction gearbox. It features liquid-cooled cylinder heads and air-cooled cylinders. Originally equipped with carburetors, late ...
and the
Rotax 912iS The Rotax 912 is a horizontally-opposed four-cylinder, naturally aspirated, four-stroke aircraft engine with a reduction gearbox. It features liquid-cooled cylinder heads and air-cooled cylinders. Originally equipped with carburetors, l ...
four-stroke A four-stroke (also four-cycle) engine is an internal combustion (IC) engine in which the piston completes four separate strokes while turning the crankshaft. A stroke refers to the full travel of the piston along the cylinder, in either directio ...
powerplants, modified by EPA Power to put out instead of their usual . It can be fitted with an inverted oil system allowing sustained inverted flight. The design is not advertised for sale by Tecnam, but instead has been sold through its US distributor, SportairUSA. As of March 2017 SportairUSA is not advertising the design for sale. As of March 2017, the design does not appear on the
Federal Aviation Administration The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic m ...
's list of approved special light-sport aircraft.


Operational history

By March 2017 no examples had been registered in the United States with the
Federal Aviation Administration The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic m ...
.


Specifications (Snap)


References

{{Portal bar, Italy, Companies, Aviation
Snap Snap or SNAP may refer to: Arts and entertainment * ''Snap'', the original release title for the 2013 film ''Enter the Dangerous Mind'' *''Snap'' (TV series), a CITV programme * ''The Stanly News and Press'', a newspaper in Albemarle, North Carol ...
2010s Italian ultralight aircraft Aerobatic aircraft