A NARROWBOAT or NARROW BOAT is a boat of a distinctive design, made to fit the narrow canals of the United Kingdom .
In the context of British Inland Waterways, "narrow boat" refers to the original working boats built in the 18th, 19th, and 20th centuries for carrying goods on the narrow canals (where locks and bridge holes would have a minimum width of 7 feet (2.13 m); some locks on the Shropshire Union are even smaller). The term is extended to modern "narrowboats" used for recreation and more and more as homes, whose design and dimensions are an interpretation of the old boats for modern purposes and modern materials.
* 1 Terminology * 2 Size
* 3 Development — traditional working boats
* 3.1 Painted decoration
* 4 Modern narrowboats
* 4.1 Types
* 4.1.1 With traditional stern * 4.1.2 With cruiser stern * 4.1.3 With semi-traditional stern * 4.1.4 With a butty stern * 4.1.5 Centre cockpit narrowboats
* 5 National organisations * 6 See also * 7 References * 8 External links
Purists tend to write the term with a space (narrow boat) when referring to an original (working) boat or a replica, omitting the space when referring to modern canal boats of around 7-foot (2.13 m) beam and used for leisure including residence. The single word 'narrowboat' has been adopted by authorities such as the Canal and River Trust , Scottish Canals and the magazine Waterways World to refer to all boats built in the style and tradition of the narrow canal locks.
Although some narrow boats were built to a design based on river barges and many conform to the strict definition of the term, it is incorrect to refer to a narrowboat (or narrow boat) as a barge . In the context of the British inland waterways, a barge is usually a much wider, cargo-carrying boat or a modern boat modelled on one, certainly more than 7 feet (2.13 m) wide.
Another historic term for a narrow boat is a long boat , this name was used in the Midlands and especially on the River Severn and connecting waterways to Birmingham.
Usage has not quite settled down as regards (a) boats based on narrowboat design, but too wide for narrow canals; or (b) boats the same width as narrowboats but based on other types of boat.
The key distinguishing feature of a narrowboat is its width which must be less than 7 feet (2.13 m) wide to navigate British narrow canals. Some old boats are very close to this limit (often built 7 feet 1 1⁄2 inches or 2.17 metres or slightly wider), and can have trouble using certain narrow locks whose width has been reduced over time because of subsidence . Modern boats are usually produced to a maximum of 6 feet 10 inches (2.08 m) wide to guarantee easy passage throughout the complete system.
Because of their slenderness, some narrowboats seem very long. The
maximum length is about 72 feet (21.95 m), which matches the length of
the shortest locks on the system. Modern narrowboats tend to be
shorter, to permit cruising anywhere on the connected network of
British canals — including on canals built for wider, but shorter,
boats. The shortest lock on the main network is
Lock on the
Calder and Hebble Navigation , at about 56 feet (17.07 m)
long. However, the C">
The first narrow boats played a key part in the economic changes of
Boatmen's families originally lived ashore, but in the 1830s as
canals started to suffer competition from the burgeoning railway
system, families (especially those of independent single boat
owner/skippers) began to live on board, partly because they could no
longer afford rents, partly to provide extra hands to work the boats
harder, faster and further, partly to keep families together. As late
as 1858, a
Household Words article states that "the Grand Junction
Canal company did not allow the boatmen's families on board." The crew
of the non-stopping ("fly ") boat in the article (skipper, two crew
and a "youth") is said to be typical. Historic working narrow
boats on the
Macclesfield Canal in
The rear portion of the boat became the "boatman's cabin", familiar from picture postcards and museums, famous for its space-saving ingenuity and interior made attractive by a warm stove, a steaming kettle, gleaming brass, fancy lace, painted housewares and decorated plates. Although such descriptions rarely consider the actual comfort of a (sometimes large) family, working brutally hard and long days, sleeping in one tiny cabin, many shore-bound workers endured harder, indoor trades in less healthy conditions and in worse accommodation, where the family was separated for long hours rather than being together all day. The lifestyle afloat, by definition itinerant, made it impossible for children to attend school. Most boat people were effectively illiterate and ostracised by those living "on the bank", who considered themselves superior.
As steam and diesel progressively replaced the tow-horse in the early
years of the 20th century, it became possible to move even more cargo
with fewer hands by towing a second, un-powered boat, referred to as a
"butty", "buttyboat" or "butty boat". Although there was no longer a
horse to maintain, the butty had to be steered while being towed. So
that the butty boatman could lengthen or shorten towline as needed,
the towline wasn't tied-off on the bow, instead travelled over the
buttyboat through permanent running blocks on stands or retractable
middle masts and managed in the stern. On a wide canal, such as the
Grand Union Canal
Cargo-carrying by narrow boat diminished from 1945 and the last regular long-distance traffic disappeared in 1970. However, some traffic continued into the 1980s and beyond. Two million tonnes of aggregate were carried on the Grand Union (River Soar) between 1976 and 1996, latterly using wide beam barges. Aggregate continues to be carried between Denham and West Drayton on the (wide) Grand Union Canal and also on the tidal estuary of Bow Creek (which is the eventual outflow of the Lee "> Decoration on a traditional English narrowboat: roses on the water can (top) and castles on the open doors to the cabin
By the end of the 19th century it was common practice to paint roses and castles on narrow boats and their fixtures and fittings. Common sites include the doors to the cabin, the water can or barrel and the side of the boat along with ornate lettering giving the boat's name and owner. This tradition did not happen in all regions, the Chesterfield Canal being one waterway where narrow boats never bore such decorations.
The origin of the roses and castles found on canal boats is unclear.
The first written reference to them appears to be in an 1858 edition
of the magazine
Household Words in one of a series of articles titled
"On the Canal", but while this shows that the art form must have
existed by this date, it doesn't provide us with an origin. For some
time, a popular suggestion was that it had some form of Romani origin;
however, there does not appear to be a significant link between the
Romani and boating communities. Other suggestions include transfer of
styles from the clock-making industry (in particular the decoration on
the face), the japanning industry or the pottery industry. There is
certainly a similarity in style and a geographical overlap, but no
solid proof of a link. There are similar styles of folk art in
In the 18th century, similar Dutch Hindeloopen paintwork would only have been a sailing barge journey away from the Thames. There is also an article in the Midland Daily Telegraph of 22 July 1914 that credits the practice of painting of water cans, at least, to a Mr Arthur Atkins. The date of the events make the claim possible, but would require the Household Words article to be reporting at the very start of a phenomenon, rather than – as its tone suggests – something that had existed for some time. Until further evidence comes to light, it is impossible to support or deny the claim that Arthur Atkins was responsible for the start of the practice and thus the origin of the paintings remains uncertain.
While the practice declined as commercial use of the canals dwindled,
it has seen something of a revival in recent times with the emergence
of leisure boating.
Modern narrowboats on the Kennet and Avon Canal
The number of licensed boats on canals and rivers managed by the Canal some may have satellite television and mobile broadband, using 3G technology. Externally, their resemblance to traditional boats can vary from a faithful imitation (false "rivets", and copies of traditional paintwork) through "interpretation" (clean lines and simplified paintwork) through to a free-style approach which does not try to pretend in any way that this is a traditional boat.
They are owned by individuals, shared by a group of friends (or by a more formally organised syndicate), rented out by holiday firms, or used as cruising hotels. A few boats are lived on permanently: either based in one place (though long-term moorings for residential narrowboats are currently very difficult to find) or continuously moving around the network (perhaps with a fixed location for the coldest months, when many stretches of canal are closed by repair works or "stoppages").
On almost all narrowboats steering is by tiller, as was the case on all working narrow boats. The steerer stands at the stern of the boat, aft of the hatchway and/or rear doors at the top of the steps up from the cabin. The steering area comes in three basic types, each meeting different needs of maximising internal space; having a more traditional appearance; having a big enough rear deck for everyone to enjoy summer weather or long evenings; or protection outside in bad weather. Each type has its advocates. However, the boundaries are not fixed, and some boats blur the categories as new designers try out different arrangements and combinations.
With Traditional Stern
Traditional-stern narrowboats at Saul,
Many modern canal boats retain the traditional layout of a small open, unguarded "counter" or deck behind the rear doors from which the crew can step onto land. It is possible to steer from the counter, but this is not very safe, with the propeller churning below only one missed step away. The "tiller extension" allows the steerer to stand in safety on the top step, forward of the rear doors. (On a working boat, this step would have been over the top of the coal box). On cold days, the steerer can even close the rear doors behind him, and be in relative comfort, his lower body in the warmth of the cabin, and only his upper body emerging from the hatchway and exposed to the elements. In good weather, many trad-stern steerers sit up on the hatchway edge, a high vantage point giving good all-round visibility. On trad boats, the bow "well-deck" forms the main outside viewing area, because the traditional stern is not large enough for anyone other than the steerer to stand on safely. Internally, trads may have an engine room forward of a traditional "boatman's cabin", or an enclosed engine tucked away out of sight and the increased living space this brings.
With Cruiser Stern
Cruiser-stern narrowboat at Tardebigge
The name for this style arises from the large open rear deck resembling that of the large rear cockpits common on glass-fibre (glass-reinforced plastic or GRP) river cruisers which in turn derives from elliptical sterns used on cruisers and larger warships in the 20th century. At the stern, a "cruiser" narrowboat looks very different from traditional boats: the hatch and rear doors are considerably further forward than on a "trad", creating a large open deck between counter and rear doors, protected by railing (perhaps with built-in seating) around back and sides. The large rear deck provides a good al fresco dining area or social space, allowing people to congregate on deck in good weather and the summer holiday season.
In winter (or less than perfect weather of summer) the steerer may be unprotected from the elements. The lack of an enclosed engine room means that engine heat does not contribute to keeping the boat warm and there may be "wasted" space above the deck area. A "cruiser" stern allows the engine to be located under the deck, rather than in the body of the boat. Although this may make access to the engine more of a nuisance (due to weather considerations) the whole deck can usually be lifted off in whole or in sections, allowing the operative to stand inside the engine bay, the cruiser stern has a major advantage that the engine is located entirely outside the living space. In this configuration also, it is common to find that the engine bay contains batteries, isolator switching, fuel tanks and seldom-used kit, spares and equipment.
With Semi-traditional Stern
A semi-traditional stern is a compromise to gain some of the "social" benefits of a cruiser stern, while retaining a more traditional design and providing some protection for the steerer in bad weather or in cooler seasons. As with the cruiser stern, the deck is extended back from the hatch and rear doors, but in this case most of the deck is protected at the sides by walls which extend back from the cabin sides – giving a more sheltered area for the steerer and companions, usually with lockers to sit on. The engine is located under the deck, much like a cruiser, again allowing a separation between the cabin and the engine bay, with the steps down to the cabin being located past the false sides of the "semi-trad" social area.
With A Butty Stern
A butty boat is an unpowered boat traditionally with a larger rudder with (usually) a wooden tiller (known as an elum, a corruption of helm ) as the steering does not benefit from the force of water generated by the propeller. The tiller is usually removed and reversed in the rudder-post socket to get it out of the way when moored. A few butty boats have been converted into powered narrowboats like NB Sirius. The term butty is derived from a dialect word meaning companion.
Centre Cockpit Narrowboats
A small number of steel narrowboats dispense with the need for a rear steering deck entirely, by imitating some river cruisers in providing wheel steering from a central cockpit.
* Scottish Canals www.scottishcanals.co.uk
Inland Waterways Association — campaigns for the use,
maintenance, and restoration of Britain's inland waterways
* National Association of
* UK Waterways portal
* ^ A B Ware, Michael E (1980). "Birmingham and the Black Country".
Narrow Boats at Work. Moorland Publishing. ISBN 0861901444 .
* ^ "