The CS 50 is a Canadian

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

, that was designed by

Germán Frers Germán Frers, Sr. (born July 4, 1941, in Argentina) is a naval architect renowned for designing successful racing yachts. He designed his first yacht in 1958. There is a design team consisting of Germán Frers and his son Germán Frers, Jr., su ...

Production

The boat was built by

CS Yachts CS Yachts was a Canadian boat manufacturer founded in 1963 by Paul Tennyson, under the name Canadian Sailcraft. The company specialized in the design and manufacture of fibreglass sailboats. The location of the firm was in Brampton, Ontario, n ...

Canada Canada is a country in North America. Its ten provinces and three territories extend from the Atlantic Ocean to the Pacific Ocean and northward into the Arctic Ocean, covering over , making it the world's second-largest country by tot ...

, with one example completed in 1987. The design went out of production in 1988.

Design

The CS 50 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open wat ...

, built predominantly of

fibreglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass clo ...

. It has a

masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, a ...

rig or can be optionally cutter rigged. It fits an internally-mounted spade-type

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...

and a fixed fin

keel The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in Br ...

, displaces and carries of lead ballast. The boat has a draft of with the standard keel and with the optional shoal draft keel. No shoal draft examples were built, but the builder advertised it as an option. The boat is fitted with a Westerbeke W-70

diesel engine The diesel engine, named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated temperature of the air in the cylinder due to mechanical compression; thus, the diesel engine is a so-call ...

. The fuel tank holds and the fresh water tank has a capacity of . The boat has a

PHRF Performance Handicap Racing Fleet (PHRF) is a handicapping system used for yacht racing in North America. It allows dissimilar classes of sailboats to be raced against each other. The aim is to cancel out the inherent advantages and disadvantages ...

racing average handicap of 84 with a high of 84 and low of 84. It has a

hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to-tro ...

of .

References

{{CS Yachts Keelboats 1980s sailboat type designs Sailing yachts Sailboat type designs by Germán Frers Sailboat types built by CS Yachts

Production

Design

See also

References