Cöln-class cruiser
   HOME

TheInfoList



OR:

The of light cruisers was Germany's last class commissioned before her defeat in World War I. Originally planned to comprise ten ships, only two were completed; and . Five more were launched, but not completed: , , , and , while another three were laid down but not launched: , and (for the last three, the names quoted were only provisional titles to be used during construction, and the three would have received other names at their launch if that had taken place). The design was a slightly modified version of the preceding . and joined the High Seas Fleet in 1918, which limited their service careers. They were assigned to the II Scouting Group, and participated in an abortive fleet operation to Norway to attack British convoys. They were to have led attacks on British merchant traffic designed to lure out the British Grand Fleet and force a climactic fleet battle in the final days of the war, but the
Wilhelmshaven Mutiny The Kiel mutiny () was a major revolt by sailors of the German High Seas Fleet on 3 November 1918. The revolt triggered the German revolution which was to sweep aside the monarchy within a few days. It ultimately led to the end of the German ...
forced the cancellation of the plan. The two ships were interned and eventually scuttled in Scapa Flow in June 1919. Both and remain on the bottom of
Scapa Flow Scapa Flow viewed from its eastern end in June 2009 Scapa Flow (; ) is a body of water in the Orkney Islands, Scotland, sheltered by the islands of Mainland, Graemsay, Burray,S. C. George, ''Jutland to Junkyard'', 1973. South Ronaldsay and ...
.


Design

By 1916, thirteen German light cruisers had been lost in the course of World War I. To replace them, the ordered ten new cruisers built to a modified design. All ten ships were laid down in 1915 and 1916. was built by the
Blohm & Voss Blohm+Voss (B+V), also written historically as Blohm & Voss, Blohm und Voß etc., is a German shipbuilding and engineering company. Founded in Hamburg in 1877 to specialise in steel-hulled ships, its most famous product was the World War II battle ...
shipyard in
Bremen Bremen (Low German also: ''Breem'' or ''Bräm''), officially the City Municipality of Bremen (german: Stadtgemeinde Bremen, ), is the capital of the German state Free Hanseatic City of Bremen (''Freie Hansestadt Bremen''), a two-city-state consis ...
. and were built at AG Vulcan in
Stettin Szczecin (, , german: Stettin ; sv, Stettin ; Latin language, Latin: ''Sedinum'' or ''Stetinum'') is the capital city, capital and largest city of the West Pomeranian Voivodeship in northwestern Poland. Located near the Baltic Sea and the Po ...
, and , , and were ordered from the AG Weser dockyard in Bremen. and were built at the
Howaldtswerke Howaldtswerke-Deutsche Werft (often abbreviated HDW) is a German shipbuilding company, headquartered in Kiel. It is part of the ThyssenKrupp Marine Systems (TKMS) group, owned by ThyssenKrupp. The Howaldtswerke shipyard was founded in Kiel in 183 ...
shipyard in Kiel, while and were built by the Imperial Dockyard in Kiel. and , the only two ships to be completed, were launched on 5 October 1916 and 25 April 1917, respectively. was launched on 3 March 1917 and was five months away from completion when she was canceled in December 1918. followed on 17 November 1917; she was nine months from being finished when she was canceled. was launched on 28 January 1918 and canceled seven months from completion. followed on 6 April, and also was seven months away from being finished. , the last ship of the class to be launched, on 16 September, was about thirteen months away from completion when she was canceled. The last three ships were canceled while still on the slipway.


General characteristics and machinery

The ships of the class were
long at the waterline A vessel's length at the waterline (abbreviated to L.W.L)Note: originally Load Waterline Length is the length of a ship or boat at the level where it sits in the water (the ''waterline''). The LWL will be shorter than the length of the boat over ...
and
long overall __NOTOC__ Length overall (LOA, o/a, o.a. or oa) is the maximum length of a vessel's hull measured parallel to the waterline. This length is important while docking the ship. It is the most commonly used way of expressing the size of a ship, and ...
. They had a
beam Beam may refer to: Streams of particles or energy *Light beam, or beam of light, a directional projection of light energy **Laser beam *Particle beam, a stream of charged or neutral particles **Charged particle beam, a spatially localized grou ...
of and a draft of forward and aft. The ships had a designed
displacement Displacement may refer to: Physical sciences Mathematics and Physics *Displacement (geometry), is the difference between the final and initial position of a point trajectory (for instance, the center of mass of a moving object). The actual path ...
of , and at full load, they displaced . Their hulls were built with longitudinal steel frames. The hulls were divided into twenty-four watertight compartments and incorporated a
double bottom A double hull is a ship Hull (watercraft), hull design and construction method where the bottom and sides of the ship have two complete layers of watertight hull surface: one outer layer forming the normal hull of the ship, and a second inner hull ...
that extended for forty-five per cent of the length of the keel. The ships had a complement of 17 officers and 542 enlisted men. They carried several smaller vessels, including one picket boat, one barge, one
cutter Cutter may refer to: Tools * Bolt cutter * Box cutter, aka Stanley knife, a form of utility knife * Cigar cutter * Cookie cutter * Glass cutter * Meat cutter * Milling cutter * Paper cutter * Side cutter * Cutter, a type of hydraulic rescue to ...
, two yawls, and two dinghies. The German Navy regarded the ships as good sea boats, having gentle motion. The ships were highly maneuverable and had a tight turning radius, but lost speed going into a turn; in hard turns, they lost up to sixty percent of their speed. They were stern-heavy. Their propulsion systems consisted of two sets of
steam turbine A steam turbine is a machine that extracts thermal energy from pressurized steam and uses it to do mechanical work on a rotating output shaft. Its modern manifestation was invented by Charles Parsons in 1884. Fabrication of a modern steam turbin ...
s, which drove a pair of screw propellers that were in diameter. Steam was provided by eight coal-fired and six oil-fired Marine-type water-tube boilers. The boilers were ducted into three
funnels A funnel is a tube or pipe that is wide at the top and narrow at the bottom, used for guiding liquid or powder into a small opening. Funnels are usually made of stainless steel, aluminium, glass, or plastic. The material used in its construc ...
amidships. Electrical power was provided by two turbo generators and one
diesel Diesel may refer to: * Diesel engine, an internal combustion engine where ignition is caused by compression * Diesel fuel, a liquid fuel used in diesel engines * Diesel locomotive, a railway locomotive in which the prime mover is a diesel engin ...
generator, which had a total output of 300 kilowatts at 220  volts. Steering was controlled by a single, large rudder. The engines were rated to produce for a top speed of . On trials, reached and a top speed of , while made and . Coal storage was as designed, though up to could be carried. Fuel oil was initially , and could be similarly increased to . At a cruising speed of , could steam for approximately , while could steam for at the same speed. At a higher speed of , the range fell considerably, to .


Armament and armor

The ship was armed with eight SK L/45 guns in single pedestal mounts. Two were placed side by side forward on the forecastle, four were located amidships, two on either side, and two were arranged in a super firing pair aft. Aboard , the forward pair of amidships guns were placed on the forecastle deck, while on the rest of the ships in the class, they were placed one deck lower, on the upper deck. These guns fired a shell at a
muzzle velocity Muzzle velocity is the speed of a projectile (bullet, pellet, slug, ball/shots or shell) with respect to the muzzle at the moment it leaves the end of a gun's barrel (i.e. the muzzle). Firearm muzzle velocities range from approximately to i ...
of . The guns had a maximum elevation of 30 degrees, which allowed them to engage targets out to . They were supplied with 1,040 rounds of ammunition, for 130 shells per gun. The ships also carried three SK L/45 anti-aircraft guns mounted on the centerline astern of the funnels, though one was removed in 1918. These guns fired a shells at a muzzle velocity of . She was also equipped with four torpedo tubes with eight torpedoes in deck-mounted swivel launchers amidships. The ships were also outfitted to carry up to 200 mines. The class ships were protected by an
armor belt Belt armor is a layer of heavy metal armor plated onto or within the outer hulls of warships, typically on battleships, battlecruisers and cruisers, and aircraft carriers. The belt armor is designed to prevent projectiles from penetrating to t ...
composed of
Krupp cemented steel Krupp armour was a type of steel naval armour used in the construction of capital ships starting shortly before the end of the nineteenth century. It was developed by Germany's Krupp Arms Works in 1893 and quickly replaced Harvey armour as the ...
. It was thick amidships and forward. The stern was not protected by armor. The armored deck was thick in the stern, thick amidships, and 60 mm thick forward. Sloped armor 40 mm thick connected the deck and belt armor. The
conning tower A conning tower is a raised platform on a ship or submarine, often armored, from which an officer in charge can conn the vessel, controlling movements of the ship by giving orders to those responsible for the ship's engine, rudder, lines, and gro ...
had thick sides and a 20 mm thick roof. The main battery guns were protected with thick gun shields.


Ships of the class


Service history

After their commissioning, and joined the High Seas Fleet. They were assigned to the II Scouting Group, alongside the cruisers , , , , and . The ships were in service in time for the major fleet operation to Norway in 23–24 April 1918. The I Scouting Group and II Scouting Group, along with the Second Torpedo-Boat Flotilla were to attack a heavily guarded British convoy to Norway, with the rest of the High Seas Fleet steaming in support. The Germans failed to locate the convoy, which had in fact sailed the day before the fleet left port. As a result, Admiral Reinhard Scheer broke off the operation and returned to port. In October 1918, the two ships and the rest of the II Scouting Group were to lead a final attack on the British navy. , , , and were to attack merchant shipping in the Thames estuary while the rest of the Group were to bombard targets in Flanders, to draw out the British Grand Fleet. Scheer intended to inflict as much damage as possible on the British navy, in order to secure a better bargaining position for Germany, whatever the cost to the fleet. On the morning of 29 October 1918, the order was given to sail from Wilhelmshaven the following day. Starting on the night of 29 October, sailors on and then on several other battleships mutinied. During the sailors' revolt, the crew of the battleship refused to move out of s way; she aimed one of her gun turrets at , but then backed down and let leave the port. The ship then went to Swinemünde, where she was partially scuttled and subsequently re-floated and returned to seaworthy condition. The unrest ultimately forced Hipper and Scheer to cancel the operation. When informed of the situation, the Kaiser stated, "I no longer have a navy." Following the capitulation of Germany in November 1918, most of the High Seas Fleet's ships, under the command of Rear Admiral
Ludwig von Reuter Hans Hermann Ludwig von Reuter (9 February 1869 – 18 December 1943) was a German admiral who commanded the High Seas Fleet when it was interned at Scapa Flow in the north of Scotland at the end of World War I. On 21 June 1919 he ordered ...
, were interned in the British naval base in Scapa Flow. and were among the ships interned.


Postwar fates

The fleet remained in captivity during the negotiations that ultimately produced the Versailles Treaty. Von Reuter believed that the British intended to seize the German ships on 21 June 1919, which was the deadline for Germany to have signed the peace treaty. Unaware that the deadline had been extended to the 23rd, Reuter ordered the ships to be sunk at the next opportunity. On the morning of 21 June, the British fleet left Scapa Flow to conduct training maneuvers, and at 11:20 Reuter transmitted the order to his ships. sank at 13:50 and was never raised for scrapping. also remains at the bottom of Scapa Flow. The eight ships that were not completed by the end of the war were formally stricken from the
naval register A Navy Directory, formerly the Navy List or Naval Register is an official list of naval officers, their ranks and seniority, the ships which they command or to which they are appointed, etc., that is published by the government or naval author ...
on 17 November 1919. The navy considered selling the vessels for conversion into
cargo ship A cargo ship or freighter is a merchant ship that carries cargo, goods, and materials from one port to another. Thousands of cargo carriers ply the world's seas and oceans each year, handling the bulk of international trade. Cargo ships are usu ...
s, even those like that had had little work done; according to the proposals, they would have received diesel engines from unfinished U-boats. By 1920, the had acquired the rights to the ships, planning to convert them into oil tankers, and this plan was approved by the Naval Inter-Allied Commission of Control, which specified that any military features in the ships (to include side and deck armor and torpedo bulkheads) were to be removed and destroyed by 31 July 1921. By this time, and had been towed to Lübeck, where conversion work had started. Their old machinery had been removed by November 1920 and their military features had been cut away by the NIACC deadline. had been similarly demilitarized at Howaldtswerke. The conversion program eventually fell apart, however, and all of the vessels were broken up. was sold on 28 October 1921 and broken up the next year at Kiel-Nordmole. and were sold in 1921 and scrapped in Hamburg. was towed to the
Deutsche Werke Deutsche Werke was a German shipbuilding company that was founded in 1925 when Kaiserliche Werft Kiel and other shipyards were merged. It came as a result of the Treaty of Versailles after World War I that forced the German defense industry to shri ...
shipyard in 1921 and broken up. was dismantled on the slipway in 1920, and and were sold on 21 and 25 June 1921, respectively. Both vessels had been launched at some point to clear the slipway, and by August 1920, had been towed to Bremen. Both ships were scrapped in 1921 in Hamburg.


Notes


References

* * * * * * * *


Further reading

* * * {{DEFAULTSORT:Koln Cruiser classes World War I cruisers of Germany