Bristol–Exeter line

The Bristol to Exeter line is a major branch of the Great Western Main Line in the West of England and runs from Bristol, to Exeter, from where it continues as the Exeter to Plymouth line. It was one of the principal routes of the pre-1948 Great Western Railway which were subsequently taken over by the Western Region of British Railways and are now part of the Network Rail system.

History

The line was built by the Bristol and Exeter Railway with Isambard Kingdom Brunel as the engineer. The section from Bristol to Bridgwater was opened on 14 June 1841 and it was completed to Taunton on 1 July 1842. It was initially operated by the Great Western Railway (GWR) as an extension of their line from London Paddington and formed part of the broad gauge trunk route to Penzance on which through trains were run from 1867, but in the same year the section between Highbridge and Durston was reconstructed as a mixed gauge line to accommodate local gauge traffic. The remainder of the line was laid with mixed gauge by 1 June 1875 and broad gauge trains ceased operation on 20 May 1892.

The Bristol and Exeter Railway took over its own operations from 1 May 1849 but amalgamated with the GWR on 1 January 1876.

On 1 July 1906 the Langport and Castle Cary Railway line was opened which enabled London to Taunton trains to run on a shorter route instead of the "Great Way Round" through Bristol.

The Great Western Railway was nationalised on 1 January 1948 into the Western Region of British Railways.

In 1977 the Parliamentary Select Committee on Nationalised Industries recommended considering electrification of more of Britain's rail network, and by 1979 BR presented a range of options to do so by 2000. Some included electrifying the Bristol to Exeter line, Exeter to Plymouth Line, Riviera Line and Cornish Main Line. Under the 1979–90 Conservative governments that succeeded the 1976–79 Labour government the proposal was not implemented. At present, there are no plans to electrify the line or any other lines mentioned, although locals are campaigning for electrification of the line from Bristol to Weston-Super-Mare.

The Bristol to Taunton Line is now part of Route 13 of the Network Rail system.

Route

Bristol to Weston-super-Mare

''Communities served: Bristol (including the suburb of Bedminster) – Nailsea and Backwell – Yatton – Weston-super-Mare (including the suburb of Worle)''

On leaving Bristol Temple Meads the line passes through suburban and railway stations. This section of the route has three tracks and, as far as Bedminster, the centre track is reversible to give some flexibility for regulating trains in the Temple Meads area. After passing through a short, deep cutting at Parson Street, the Portbury branch line diverges on the right.

The line climbs westwards up past Long Ashton village and under the A370 road to enter a cutting with Flax Bourton tunnel at the summit. The remains of Flax Bourton railway station are near the tunnel. The line descends to Nailsea and Backwell railway station, which is on a road bridge between Backwell on the left and Nailsea over the low hill on the right. It then continues past the isolated church at Chelvey (left) to Yatton railway station. This was once a busy junction station with branches to Clevedon (right) and Wells (left); the latter is now a footpath and cycleway as far as Cheddar.

Beyond Yatton the line runs across the low-lying North Marsh with level crossings at Hewish and , where an old signal box is retained to supervise the two level crossings. The line passes beneath the M5 motorway approaching Puxton and then comes to Worle railway station on the outskirts of Weston-super-Mare. A short distance beyond the station is Worle Junction where a single-track branch diverges to the right to serve and railway stations. There is a crossing loop at Weston-super-Mare, beyond which the single track continues to rejoin the main line at Uphill Junction.

Weston-super-Mare to Taunton

''Communities served: Weston-super-Mare – Highbridge and Burnham-on-Sea – Bridgwater – Taunton''

The line has now swung round to head south. At Uphill there is a short, deep cutting crossed by a high brick bridge built by Brunel, known locally as "Devil's Bridge". The bridge is Grade II listed. Beyond this lie the remains of Bleadon and Uphill railway station (right). Passing across the Somerset Levels the line comes to the site of Brent Knoll railway station with the isolated hill that it was named for close by on the left. The next open station is ; this is in Highbridge but also serves co-joined Burnham-on-Sea. The Somerset and Dorset Joint Railway used to cross the line on the level just north of the station; their locomotive works were on the site of the industrial units visible to the left as the line passes through the station.

More level ground brings the line to where the goods yard is used for waste traffic from Hinkley Point B Nuclear Power Station. Beyond the station, on the right, used to be the carriage works of the Bristol and Exeter Railway but the site is now lost beneath modern industrial units. The line now crosses over the River Parrett on the Somerset Bridge and then passes below the M5 again.

The Bridgwater and Taunton Canal now joins on the right for most of the way to . At the former Yeovil branch line joins from the left. A short cutting brings the line to Cogload Junction; the line towards Taunton climbs up here and crosses above the Reading to Taunton Line which it then joins to complete the journey to Taunton, passing and the former junction of the Chard branch line on the left. The final run into Taunton sees the River Tone appear alongside on left and the canal passes beneath the line to join the river at Firepool, behind the site of the former goods yard on the same side.

Taunton to Exeter

''Communities served: Taunton – Tiverton and Willand – Exeter''

The line leaves Taunton and passes the engineer's depot at Fairwater Yard on the same side. The former Norton Fitzwarren railway station is the location of two serious collisions and a fatal train fire. The West Somerset Railway diverges on the right and work is under way to provide new facilities here for this heritage railway which includes relaying track for a short distance along the old Devon and Somerset Railway that formed a third route in between the main line and the West Somerset. On the left of the line an embankment marks the remains of the Grand Western Canal.

After passing over Victory Crossing at Bradford-on-Tone, the line starts to climb upwards. It passes through the remains of Wellington station and then under the A38 road at , which was the site of the line's terminus while work was underway to excavate the Whiteball Tunnel at the top of Wellington Bank. It was coming down here that '' City of Truro'' became the first locomotive to exceed .

Through the tunnel and into Devon, the M5 motorway comes alongside on the left and the line arrives at , the railhead for much of north Devon via the A361 road that joins the motorway next to the station. A short distance further is Tiverton Loops, the site of the former Tiverton Junction railway station.

The motorway service station on the left marks the site of Cullompton railway station, and then the line passes the remains of and stations. At the old Exe Valley Railway used to join from the right, and then the railway sweeps through the valley of the River Culm to where it joins the River Exe near Cowley Bridge Junction. Here the Tarka Line from Barnstaple joins on the right and the line then passes (on the same side) Riverside Yard and an old transhipment shed. Until 20 May 1892, when the then GWR lines were converted from the broad gauge, the shed was used to transfer goods between broad gauge wagons and the standard gauge wagons used by the London and South Western Railway to Yeovil and Barnstaple. Passing over the wide Red Cow level crossing, the line comes to Exeter St Davids railway station.

Services

All stations on the route are served by Great Western Railway. Local trains generally operate between and (calling at all stations between and Taunton except and ) and from to (calling at all stations from Temple Meads) combining to give a half-hourly service between Bristol Temple Meads and Weston-super-Mare throughout much of the day. Through trains to and from are also operated via Bristol to Weston-super-Mare and Taunton, and direct from London via to Taunton and Exeter. Some services from Cardiff and many from London continue beyond Exeter towards and . Local trains are mostly formed from a mix of and DMUs or 'Castle' trains. London services are operated using and trains.

The other operator on the route is CrossCountry, which provides trains between Scotland and north-east England and , or . Trains are mostly formed of and units, working either singly or in pairs, although each day also sees a few workings using HST sets.

Infrastructure

The route has a line speed limit of with local variations, the main one being the 110 mph from approx. Bleadon (138-44) to Huntspill (147-00); trains from Bristol to Taunton are described as travelling in the 'down' direction. It is constructed to Route Availability 8 and freight loading gauge W8. It has Multiple Aspect Signals (MAS) and Track Circuit Block (TCB) controlled from the panel signal box at Bristol. A local signal box at controls the two level crossings at Hewish and Puxton, and an emergency panel at can take control of the section from Hewish to Uphill Junction if required.

The 21st Century modernisation of the Great Western Main Line has included electrification of the main line from London to however this is not planned to be extended onto the Bristol to Exeter line. Trains are now a hybrid of diesel and electric power ( Bimodes) which can run on non electrified routes south of Bristol.

The / corridor is one of the main axes of the proposed Greater Bristol Metro, which aims to enhance transport capacity in the Bristol area.

There have also been calls for a dedicated railway line to Bristol Airport, branching off from the main line somewhere near Flax Bourton.

See also

*Disused railway stations (Bristol to Exeter Line)
*Disused railway stations (Exeter to Plymouth Line)
*21st-century modernisation of the Great Western Main Line

References

Sources and further reading

*
*
*
*
*
*
*

{{DEFAULTSORT:Bristol-Exeter line
Railway lines in South West England
Rail transport in Bristol
Rail transport in Devon
Rail transport in Somerset
Railway lines opened in 1842
Transport in Exeter
1842 establishments in England