Bagalini Baganfibio
   HOME

TheInfoList



OR:

The Bagalini Baganfibio (a portmanteau of "Bagalini" and "Amphibian") is an Italian
homebuilt Homebuilt machines are machines built outside of specialised workshops or factories. This can include different things such as kit cars or homebuilt computers, but normally it pertains to homebuilt aircraft, also known as amateur-built aircraft or ...
flying boat A flying boat is a type of fixed-winged seaplane with a hull, allowing it to land on water. It differs from a floatplane in that a flying boat's fuselage is purpose-designed for floatation and contains a hull, while floatplanes rely on fusela ...
that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.Purdy, Don: ''AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition'', page 126. BAI Communications, 15 July 1998.


Design and development

The Baganfibio features a
strut-braced In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...
high-wing, a two-seats-in- tandem enclosed cockpit, retractable conventional landing gear and a single engine in tractor configuration mounted above the wing. The aircraft is of all-wooden construction, with its wings covered in doped aircraft fabric. Its span wing employs an RSG 36
airfoil An airfoil (American English) or aerofoil (British English) is the cross-sectional shape of an object whose motion through a gas is capable of generating significant lift, such as a wing, a sail, or the blades of propeller, rotor, or turbine. ...
, mounts
Junkers Junkers Flugzeug- und Motorenwerke AG (JFM, earlier JCO or JKO in World War I, English: Junkers Aircraft and Motor Works) more commonly Junkers , was a major German aircraft and aircraft engine manufacturer. It was founded there in Dessau, Germ ...
aileron An aileron (French for "little wing" or "fin") is a hinged flight control surface usually forming part of the trailing edge of each wing of a fixed-wing aircraft. Ailerons are used in pairs to control the aircraft in roll (or movement around ...
s and has a wing area of . The aircraft does not use tip floats, but instead relies on sponsons for balance in the water. The acceptable power range is and the standard engines used are the Rotax 447 or the Rotax 503 two-stroke powerplants. The Baganfibio has an empty weight of and a gross weight of , giving a useful load of . With full fuel of the payload is . The manufacturer estimates the construction time from the supplied kit as 700 hours.


Specifications (Baganfibio)


References


External links


Photo of a Bagalini Baganfibio
Baganfibio 1960s Italian sport aircraft 1990s Italian ultralight aircraft Single-engined tractor aircraft High-wing aircraft Homebuilt aircraft Flying boats {{aero-1960s-stub