William Fernihough
   HOME

TheInfoList



OR:

William Fernihough was locomotive superintendent of the
Eastern Counties Railway The Eastern Counties Railway (ECR) was an English Rail transport, railway company incorporated in 1836 intended to link London with Ipswich via Colchester, and then extend to Norwich and Great Yarmouth, Yarmouth. Construction began in 1837 on t ...
(ECR) from 1843 to 1845. He is noted for his work on the balancing of railway engines in particular the counterbalanced driving wheel


Biography

Fernihough served his apprenticeship at
George Forrester and Company George Forrester and Company was a British marine engine and locomotive manufacturer at Vauxhall Foundry in Liverpool, established by Scottish engineer George Forrester (b. 1780/81). The company opened in 1827 as iron founders and commenced buil ...
at
Vauxhall, Liverpool Vauxhall is an inner city district of Liverpool, Merseyside, England. It is located north of Liverpool city centre, and is bounded by Kirkdale in the north, and Everton in the east, with the docks and River Mersey running along the west side. ...
. He was present at the firm during the period when the company built locomotives for the
Dublin and Kingstown Railway The Dublin and Kingstown Railway (D&KR), which opened in 1834, was Ireland’s first passenger railway. It linked Westland Row in Dublin with Kingstown Harbour (Dún Laoghaire) in County Dublin. The D&KR was also notable for a number of other ...
.
Nock Nock may refer to: Archery * In a bow and arrow, two notches near the bow's respective ends, for attaching the bowstring * Nock (arrow), in an arrow, the notch in the fletched (feathered) end of the arrow, for engaging the bowstring People *H ...
specifically terms these
locomotives A locomotive or engine is a rail transport vehicle that provides the motive power for a train. If a locomotive is capable of carrying a payload, it is usually rather referred to as a multiple unit, motor coach, railcar or power car; the u ...
"notorious outside cylindered 's", the combination of outside cylinders wide apart at the front, unbalanced wheels and short wheelbase contributing to a oscillating motion and a nickname of "Boxers". While the issues were contained by a combination of the D&KR adding trailing wheels, using a stronger trackbed and limiting excessive speed Fernihough would have been aware of the issues. Subsequently he was employed at
Edward Bury Edward Bury (22 October 1794 – 25 November 1858) was an English locomotive manufacturer. Born in Salford, Lancashire, he was the son of a timber merchant and was educated at Chester. Career By 1823 he was a partner in Gregson and Bury's steam ...
's who had a nearby workshop in Liverpool. Bury had significant contract to supply the
London and Birmingham Railway The London and Birmingham Railway (L&BR) was a railway company in the United Kingdom, in operation from 1833 to 1846, when it became part of the London and North Western Railway (L&NWR). The railway line which the company opened in 1838, betw ...
at this time, but Fernihough is noted as working in the Liverpool workshops. Bury's locomotives had inside-cylinders and would have been less susceptible to oscillations, though the crank-axle could be a weakspot. Fernihough was appointed
locomotive superintendent Chief mechanical engineer and locomotive superintendent are titles applied by British, Australian, and New Zealand railway companies to the person ultimately responsible to the board of the company for the building and maintaining of the locomotive ...
following the departure of resident engineer John Braithwaite in February 1843. A key task Fernihough faced in 1844 was the re-gauging of the ECR locomotives and rolling stock from to . It was during his spell at the ECR, that Fernihough became famed for adding counterbalanced weights to the rims of locomotive wheels to improve stability as speed. Others had added weights to wheels before him, there are even claims of his predecessor Braithwaite doing so at the ECR, however as evidenced later by his report to the Gauge Commission he appeared to be doing this in a structured manner and the success of evidenced in the performance of ECR locomotives even after he left. From his the report of an accident on the ECR on 4 August 1845 at
Littlebury Littlebury is a village and civil parish in the Uttlesford district, north-west Essex, England. The village is approximately a mile and a half from the market town of Saffron Walden, south from Cambridge, the nearest city, and north-east from t ...
Fernihough had been riding on an engine that had become derailed with the guard being fatally injured in the accident. Fernihough seems to have resigned at this time, in any event he was replaced by Thomas Scott on 28 October 1845. On 27 October 1845, Fernihough appeared before the Gauge Commission and by the analysis of Bardell's thesis gave the first published account of the mathematics and mechanics of the wheel balancing problem. Nock, in 1957, described Fernihough's method of balancing the reciprocating parts of an engine by adding weights in the driving wheels" as "now universal — not theoretically perfect, but a judicious compromise between the mathematically exact and the practical minimum. In 1848, Fernihough was tasked by the South Eastern Railway (SER) to build a locomotive / directors' inspection carriage combination at the works at
Bricklayers Arms Bricklayers Arms is the road intersection of the A2 and the London Inner Ring Road where Bermondsey meets Walworth and Elephant & Castle in south London. It is the junction of Tower Bridge Road, Old Kent Road, New Kent Road and Great Dover St ...
. Progress was slow, and after 21 months the locomotive superintendent James Cudworth resorted to sending the vehicle to
Ashford works Ashford railway works was in the town of Ashford in the county of Kent in England. History South Eastern Railway Ashford locomotive works was built by the South Eastern Railway on a new site in 1847, replacing an earlier locomotive repair faci ...
to be completed where it emerged as No. 126 ''Coffee Pot''. In 1850, Fernihough raised a patent (No. 1328) for a mixed steam and gas turbine unit, on which it was commented in 1945, "has merit today".


Legacy

Apart from the subsequent take up of the use of counterbalanced wheels in the UK and elsewhere, the ECR seems to have benefited from Fernihough's work in being able to run locomotives for longer and faster than was possible on other UK railways. In particular Stephenson's ''long-boiler'' types were particularly subject to swaying and instability at speed; however, with Fernihough's counterbalanced wheels, the ECR seemed able to operate them at acceptable passenger speeds and retain them operationally for longer than other UK railways.


References


Notes


Footnotes


Sources

* * * * * * * * * {{DEFAULTSORT:Fernihough, William English mechanical engineers English railway mechanical engineers