violet noise

In audio engineering, electronics, physics, and many other fields, the color of noise or noise spectrum refers to the power spectrum of a noise signal (a signal produced by a stochastic process). Different colors of noise have significantly different properties. For example, as audio signals they will sound different to human ears, and as images they will have a visibly different texture. Therefore, each application typically requires noise of a specific color. This sense of 'color' for noise signals is similar to the concept of timbre in music (which is also called "tone color"; however, the latter is almost always used for sound, and may consider very detailed features of the spectrum).

The practice of naming kinds of noise after colors started with white noise, a signal whose spectrum has equal power within any equal interval of frequencies. That name was given by analogy with white light, which was (incorrectly) assumed to have such a flat power spectrum over the visible range. Other color names, such as ''pink'', ''red'', and ''blue'' were then given to noise with other spectral profiles, often (but not always) in reference to the color of light with similar spectra. Some of those names have standard definitions in certain disciplines, while others are very informal and poorly defined. Many of these definitions assume a signal with components at all frequencies, with a power spectral density per unit of bandwidth proportional to 1/''f'' ^''β'' and hence they are examples of ''power-law noise''. For instance, the spectral density of white noise is flat (''β'' = 0), while flicker or pink noise has ''β'' = 1, and Brownian noise has ''β'' = 2.

Technical definitions

Various noise models are employed in analysis, many of which fall under the above categories. AR noise or "autoregressive noise" is such a model, and generates simple examples of the above noise types, and more. The Federal Standard 1037C Telecommunications Glossary defines white, pink, blue, and black noise.

The color names for these different types of sounds are derived from a loose analogy between the spectrum of frequencies of sound wave present in the sound (as shown in the blue diagrams) and the equivalent spectrum of light wave frequencies. That is, if the sound wave pattern of "blue noise" were translated into light waves, the resulting light would be blue, and so on.

White noise

White noise is a signal (or process), named by analogy to white light, with a flat frequency spectrum when plotted as a linear function of frequency (e.g., in Hz). In other words, the signal has equal power in any band of a given bandwidth (power spectral density) when the bandwidth is measured in Hz. For example, with a white noise audio signal, the range of frequencies between 40 Hz and 60 Hz contains the same amount of sound power as the range between 400 Hz and 420 Hz, since both intervals are 20 Hz wide. Note that spectra are often plotted with a logarithmic frequency axis rather than a linear one, in which case equal physical widths on the printed or displayed plot do not all have the same bandwidth, with the same physical width covering more Hz at higher frequencies than at lower frequencies. In this case a white noise spectrum that is equally sampled in the logarithm of frequency (i.e., equally sampled on the X axis) will slope upwards at higher frequencies rather than being flat. However it is not unusual in practice for spectra to be calculated using linearly-spaced frequency samples but plotted on a logarithmic frequency axis, potentially leading to misunderstandings and confusion if the distinction between equally spaced linear frequency samples and equally spaced logarithmic frequency samples is not kept in mind.

Pink noise

The frequency spectrum of pink noise is linear in logarithmic scale; it has equal power in bands that are proportionally wide. This means that pink noise would have equal power in the frequency range from 40 to 60 Hz as in the band from 4000 to 6000 Hz. Since humans hear in such a proportional space, where a doubling of frequency (an octave) is perceived the same regardless of actual frequency (40–60 Hz is heard as the same interval and distance as 4000–6000 Hz), every octave contains the same amount of energy and thus pink noise is often used as a reference signal in audio engineering. The spectral power density, compared with white noise, decreases by 3.01 dB per octave (density proportional to 1/''f'' ). For this reason, pink noise is often called "1/''f'' noise".

Since there are an infinite number of logarithmic bands at both the low frequency (DC) and high frequency ends of the spectrum, any finite energy spectrum must have less energy than pink noise at both ends. Pink noise is the only power-law spectral density that has this property: all steeper power-law spectra are finite if integrated to the high-frequency end, and all flatter power-law spectra are finite if integrated to the DC, low-frequency limit.

Brownian noise

Brownian noise, also called Brown noise, is noise with a power density which decreases 6.02 dB per octave with increasing frequency (frequency density proportional to 1/''f'') over a frequency range excluding zero ( direct current, DC).

Brownian noise can be generated with temporal integration of white noise. "Brown" noise is not named for a power spectrum that suggests the color brown; rather, the name derives from Brownian motion. Also known as "random walk" or "drunkard's walk". "Red noise" describes the shape of the power spectrum, with pink being between red and white.

Blue noise

Blue noise is also called azure noise. Blue noise's power density increases ln(2)/ln(10)=3.01 dB per octave with increasing frequency (density proportional to ''f'' ) over a finite frequency range. In computer graphics, the term "blue noise" is sometimes used more loosely as any noise with minimal low frequency components and no concentrated spikes in energy. This can be good noise for dithering. Retinal cells are arranged in a blue-noise-like pattern which yields good visual resolution.

Cherenkov radiation is a naturally occurring example of almost perfect blue noise, with the power density growing linearly with frequency over spectrum regions where the permeability of index of refraction of the medium are approximately constant. The exact density spectrum is given by the Frank–Tamm formula. In this case, the finiteness of the frequency range comes from the finiteness of the range over which a material can have a refractive index greater than unity. Cherenkov radiation also appears as a bright blue color, for these reasons.

Artistic approaches in soundwalk design and soundscape studies have appropriated the term of "blue noise" for describing water sounds. For example, as part of the events surrounding Esch2022 - European Capital of Culture, Swiss urbanist Trond Maag and sound gardener Andres Bosshard have designed soundwalk routes through the everyday acoustic environment of Esch and Belval, which are intended to invite the walkers/listeners to discover their urban surroundings in a new way (in collaboration with Administration de l’environnement Luxembourg, Université du Luxembourg, and Ville d’Esch-sur-Alzette).

Violet noise

Violet noise is also called purple noise. Violet noise's power density increases 6.02 dB per octave with increasing frequency "The spectral analysis shows that GPS acceleration errors seem to be violet noise processes. They are dominated by high-frequency noise." (density proportional to ''f'' ²) over a finite frequency range. It is also known as differentiated white noise, due to its being the result of the differentiation of a white noise signal.

Due to the diminished sensitivity of the human ear to high-frequency hiss and the ease with which white noise can be electronically differentiated (high-pass filtered at first order), many early adaptations of dither to digital audio used violet noise as the dither signal.

Acoustic thermal noise of water has a violet spectrum, causing it to dominate hydrophone measurements at high frequencies. "Predictions of the thermal noise spectrum, derived from classical statistical mechanics, suggest increasing noise with frequency with a positive slope of 6.02 dB octave⁻¹." "Note that thermal noise increases at the rate of 20 dB decade⁻¹"

Grey noise

Grey noise is random white noise subjected to a psychoacoustic equal loudness curve (such as an inverted A-weighting curve) over a given range of frequencies, giving the listener the perception that it is equally loud at all frequencies. This is in contrast to standard white noise which has equal strength over a linear scale of frequencies but is not perceived as being equally loud due to biases in the human equal-loudness contour.

Informal definitions

There are also many colors used without precise definitions (or as synonyms for formally defined colors), sometimes with multiple definitions.

Red noise

* A synonym for Brownian noise, as above
* Similar to pink noise, but with different spectral content and different relationships (i.e. 1/f for pink noise, while 1/f² for red noise, or an decrease of 6.02dB per octave).
* In areas where terminology is used loosely, "red noise" may refer to any system where power density decreases with increasing frequency.

Green noise

* The mid-frequency component of white noise, used in halftone dithering
* Bounded Brownian noise
* Vocal spectrum noise used for testing audio circuits

* Joseph S. Wisniewski writes that "green noise" is marketed by producers of ambient sound effects recordings as "the background noise of the world". It simulates the spectra of natural settings, without human-made noises. Pink noise is similar, but has more energy in the area of 500 Hz.

Black noise

* Silence
* Infrasound
* Noise with a 1/''f'' spectrum, where . This formula is used to model the frequency of natural disasters.
* Noise that has a frequency spectrum of predominantly zero power level over all frequencies except for a few narrow bands or spikes. ''Note:'' An example of black noise in a facsimile transmission system is the spectrum that might be obtained when scanning a black area in which there are a few random white spots. Thus, in the time domain, a few random pulses occur while scanning.
* Noise with a spectrum corresponding to the blackbody radiation (thermal noise). For temperatures higher than about the peak of the blackbody spectrum is above the upper limit of human hearing range. In those situations, for the purposes of what is heard, black noise is well approximated as violet noise. At the same time, Hawking radiation of black holes may have a peak in hearing range, so the radiation of a typical stellar black hole with a mass equal to 6 solar masses will have a maximum at a frequency of 604.5 Hz - this noise is similar to green noise. A formula is: $f_ \approx 3627 \times$ Hz. Several examples of audio files with this spectrum can be foun
here

Noisy white

In telecommunication, the term noisy white has the following meanings:
* In facsimile or display systems, such as television, a nonuniformity in the white area of the image, ''i.e.'', document or picture, caused by the presence of noise in the received signal.
* A signal or signal level that is supposed to represent a white area on the object, but has a noise content sufficient to cause the creation of noticeable black spots on the display surface or record medium.

Noisy black

In telecommunication, the term noisy black has the following meanings:
* In facsimile or display systems, such as television, a nonuniformity in the black area of the image, ''i.e.'', document or picture, caused by the presence of noise in the received signal.
* A signal or signal level that is supposed to represent a black area on the object, but has a noise content sufficient to cause the creation of noticeable non-black spots on the display surface or record medium.

Generation

Coloured noise can be computer-generated by first generating a white noise signal, Fourier-transforming it, then multiplying the amplitudes of the different frequency components with a frequency-dependent function. Matlab programs are available to generate power-law coloured noise i
one
or
any number
of dimensions.

See also

* Mains hum (also known as the AC power hum)
* Whittle likelihood

References

External links

Some colored noise definitions

Online Colored Noise Generator
an
True Grey Noise Generator

Black Noise and Population Persistence

{{DEFAULTSORT:Colors Of Noise
Noise (electronics)
Encodings