Tin Lizzie
   HOME

TheInfoList



OR:

The Ford Model T is an automobile that was produced by Ford Motor Company from October 1, 1908, to May 26, 1927. It is generally regarded as the first affordable automobile, which made car travel available to middle-class Americans. The relatively low price was partly the result of Ford's efficient fabrication, including assembly line production instead of individual handcrafting. It was mainly designed by an American (
Childe Harold Wills Childe Harold Wills (June 1, 1878 – December 30, 1940) was an American engineer and businessman. He was an early associate of Henry Ford, one of the first employees of the Ford Motor Company, and the chief contributor to the design of the Mode ...
) and two Hungarian engineers (
Joseph A. Galamb Joseph is a common male given name, derived from the Hebrew Yosef (יוֹסֵף). "Joseph" is used, along with "Josef", mostly in English, French and partially German languages. This spelling is also found as a variant in the languages of the mo ...
, Eugene Farkas). The Model T was colloquially known as the "Tin Lizzie", "Leaping Lena" or "flivver". The Ford Model T was named the most influential car of the 20th century in the 1999 Car of the Century competition, ahead of the BMC Mini, Citroën DS, and Volkswagen Beetle. Ford's Model T was successful not only because it provided inexpensive transportation on a massive scale, but also because the car signified innovation for the rising middle class and became a powerful symbol of the United States' age of modernization. With 15 million sold, it was the most sold car in history before being surpassed by the Volkswagen Beetle in 1972, and still stood eighth on the top-ten list, .


Introduction

Although automobiles had been produced from the 1880s, until the Model T was introduced in 1908, they were mostly scarce, expensive, and often unreliable. Positioned as reliable, easily maintained, mass-market transportation, the Model T was a great success. In a matter of days after the release, 15,000 orders had been placed. The first production Model T was built on August 12, 1908 and left the factory on September 27, 1908, at the Ford Piquette Avenue Plant in Detroit, Michigan. On May 26, 1927, Henry Ford watched the 15 millionth Model T Ford roll off the assembly line at his factory in Highland Park, Michigan. Henry Ford conceived a series of cars between the founding of the company in 1903 and the introduction of the Model T. Ford named his first car the Model A and proceeded through the alphabet up through the Model T, twenty models in all. Not all the models went into production. The production model immediately before the Model T was the Model S, an upgraded version of the company's largest success to that point, the Model N. The follow-up to the Model T was another Ford Model A, rather than the "Model U." The company publicity said this was because the new car was such a departure from the old that Ford wanted to start all over again with the letter ''A''. The Model T was Ford's first automobile mass-produced on moving assembly lines with completely
interchangeable parts Interchangeable parts are parts ( components) that are identical for practical purposes. They are made to specifications that ensure that they are so nearly identical that they will fit into any assembly of the same type. One such part can freely r ...
, marketed to the middle class. Henry Ford said of the vehicle:
I will build a motor car for the great multitude. It will be large enough for the family, but small enough for the individual to run and care for. It will be constructed of the best materials, by the best men to be hired, after the simplest designs that modern engineering can devise. But it will be so low in price that no man making a good salary will be unable to own one – and enjoy with his family the blessing of hours of pleasure in God's great open spaces.
Although credit for the development of the assembly line belongs to Ransom E. Olds, with the first mass-produced automobile, the
Oldsmobile Curved Dash __NOTOC__ The gasoline-powered Oldsmobile Model R, also known as the Curved Dash Oldsmobile, is credited as being the first mass-produced automobile, meaning that it was built on an assembly line using interchangeable parts. It was introduced by ...
, having begun in 1901, the tremendous advances in the efficiency of the system over the life of the Model T can be credited almost entirely to Ford and his engineers.


Characteristics

The Model T was designed by
Childe Harold Wills Childe Harold Wills (June 1, 1878 – December 30, 1940) was an American engineer and businessman. He was an early associate of Henry Ford, one of the first employees of the Ford Motor Company, and the chief contributor to the design of the Mode ...
, and Hungarian immigrants
Joseph A. Galamb Joseph is a common male given name, derived from the Hebrew Yosef (יוֹסֵף). "Joseph" is used, along with "Josef", mostly in English, French and partially German languages. This spelling is also found as a variant in the languages of the mo ...
and Eugene Farkas. Henry Love, C. J. Smith, Gus Degner and
Peter E. Martin Peter Edmund Martin (1882–1944) was a leading early production executive of the Ford Motor Company. Martin was hired by close Henry Ford associate C. Harold Wills on December 15, 1903, and at that time was the company's fifth employee. He was ...
were also part of the team. Production of the Model T began in the third quarter of 1908.. Collectors today sometimes classify Model Ts by build years and refer to these as " model years," thus labeling the first Model Ts as 1909 models. This is a retroactive classification scheme; the concept of model years as understood today did not exist at the time. The nominal model designation was "Model T," although design revisions did occur during the car's two decades of production.


Engine

The Model T has a front-mounted inline four-cylinder engine, producing , for a top speed of . According to Ford Motor Company, the Model T had fuel economy on the order of . The engine was capable of running on gasoline, kerosene, or ethanol, although the decreasing cost of gasoline and the later introduction of Prohibition made ethanol an impractical fuel for most users. The engines of the first 2,447 units were cooled with water pumps; the engines of unit 2,448 and onward, with a few exceptions prior to around unit 2,500, were cooled by thermosiphon action.. The ignition system used in the Model T was an unusual one, with a low-voltage magneto incorporated in the flywheel, supplying alternating current to trembler coils to drive the
spark plug A spark plug (sometimes, in British English, a sparking plug, and, colloquially, a plug) is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air ...
s. This was closer to that used for stationary
gas engine A gas engine is an internal combustion engine that runs on a gaseous fuel, such as coal gas, producer gas, biogas, landfill gas or natural gas. In the United Kingdom, the term is unambiguous. In the United States, due to the widespread use of ...
s than the expensive high-voltage
ignition magneto An ignition magneto, or high-tension magneto, is a magneto that provides current for the ignition system of a spark-ignition engine, such as a petrol engine. It produces pulses of high voltage for the spark plugs. The older term ''tension'' ...
s that were used on some other cars. This ignition also made the Model T more flexible as to the quality or type of fuel it used. The system did not need a starting battery, since proper hand-cranking would generate enough current for starting. Electric lighting powered by the magneto was adopted in 1915, replacing acetylene gas flame lamp and oil lamps, but electric starting was not offered until 1919. The Model T engine was produced for replacement needs as well as stationary and marine applications until 1941, well after production of the Model T had ended. The Fordson Model F tractor engine, that was designed about a decade later, was very similar to, but larger than, the Model T engine.


Transmission and drive train

The Model T is a rear-wheel drive vehicle. Its
transmission Transmission may refer to: Medicine, science and technology * Power transmission ** Electric power transmission ** Propulsion transmission, technology allowing controlled application of power *** Automatic transmission *** Manual transmission *** ...
is a planetary gear type known (at the time) as "three speed." In today's terms it is considered a two-speed, because one of the three speeds is reverse. The Model T's transmission is controlled with three floor-mounted
pedals A pedal (from the Latin '' pes'' ''pedis'', "foot") is a lever designed to be operated by foot and may refer to: Computers and other equipment * Footmouse, a foot-operated computer mouse * In medical transcription, a pedal is used to control p ...
, a revolutionary feature for its time, and a lever mounted to the road side of the driver's seat. The throttle is controlled with a lever on the
steering wheel A steering wheel (also called a driving wheel (UK), a hand wheel, or simply wheel) is a type of steering control in vehicles. Steering wheels are used in most modern land vehicles, including all mass-production automobiles, buses, light and ...
. The left-hand pedal is used to engage the transmission. With the floor lever in either the mid position or fully forward and the pedal pressed and held forward, the car enters low gear. When held in an intermediate position, the car is in neutral. If the left pedal is released, the Model T enters high gear, but only when the lever is fully forward – in any other position, the pedal only moves up as far as the central neutral position. This allows the car to be held in neutral while the driver cranks the engine by hand. The car can thus cruise without the driver having to press any of the pedals. In the first 800 units, reverse is engaged with a lever; all units after that use the central pedal, which is used to engage reverse gear when the car is in neutral. The right-hand pedal operates the
transmission brake A transmission brake or driveline parking brake is an inboard vehicle brake that is applied to the drivetrain rather than to the wheels. Historically, some early cars used transmission brakes as the normal driving brake and often had wheel brake ...
– there are no brakes on the wheels. The floor lever also controls the parking brake, which is activated by pulling the lever all the way back. This doubles as an emergency brake. Although it was uncommon, the drive bands could fall out of adjustment, allowing the car to creep, particularly when cold, adding another hazard to attempting to start the car: a person cranking the engine could be forced backward while still holding the crank as the car crept forward, although it was nominally in neutral. As the car utilizes a
wet clutch A clutch is a mechanical device that engages and disengages power transmission, especially from a drive shaft to a driven shaft. In the simplest application, clutches connect and disconnect two rotating shafts (drive shafts or line shafts). ...
, this condition could also occur in cold weather, when the thickened oil prevents the clutch discs from slipping freely. Power reaches the differential through a single universal joint attached to a torque tube which drives the rear
axle An axle or axletree is a central shaft for a rotating wheel or gear. On wheeled vehicles, the axle may be fixed to the wheels, rotating with them, or fixed to the vehicle, with the wheels rotating around the axle. In the former case, bearing ...
; some models (typically trucks, but available for cars, as well) could be equipped with an optional two-speed rear Ruckstell axle, shifted by a floor-mounted lever which provides an underdrive gear for easier hill climbing.


Chassis / frame

The heavy-duty '' Model TT'' truck chassis came with a special worm gear rear differential with lower gearing than the normal car and truck, giving more pulling power but a lower top speed (the frame is also stronger; the cab and engine are the same). A Model TT is easily identifiable by the cylindrical housing for the worm-drive over the axle differential. All gears are
vanadium steel Vanadium is a chemical element with the symbol V and atomic number 23. It is a hard, silvery-grey, malleable transition metal. The elemental metal is rarely found in nature, but once isolated artificially, the formation of an oxide layer ( passi ...
running in an oil bath.


Transmission bands and linings

Two main types of band lining material were used: * ''Cotton'' – Cotton woven linings were the original type fitted and specified by Ford. Generally, the cotton lining is "kinder" to the drum surface, with damage to the drum caused only by the retaining rivets scoring the drum surface. Although this in itself did not pose a problem, a dragging band resulting from improper adjustment caused overheating of the transmission and engine, diminished power, and – in the case of cotton linings – rapid destruction of the band lining. * ''Wood'' – Wooden linings were originally offered as a "longer life" accessory part during the life of the Model T. They were a single piece of steam-bent wood and metal wire, fitted to the normal Model T transmission band. These bands give a very different feel to the pedals, with much more of a "bite" feel. The sensation is of a definite "grip" of the drum and seemed to noticeably increase the feel, in particular of the brake drum.


Aftermarket transmissions and drives

During the Model T's production run, particularly after 1916, more than 30 manufacturers offered auxiliary transmissions or drives to substitute for, or enhance, the Model T's drivetrain gears. Some offered overdrive for greater speed and efficiency, while others offered underdrives for more torque (often incorrectly described as "power") to enable hauling or pulling greater loads. Among the most noted were the Ruckstell two-speed rear axle, and transmissions by Muncie, Warford, and Jumbo. Aftermarket transmissions generally fit one of four categories: * ''Replacement transmission'' -- usually a sliding gear/selective transmission, intended as a direct replacement for Ford's planetary-gear transmission. * ''Front-mounted auxiliary transmission'' -- designed to fit between the engine and Ford's transmission, to add additional gear ratios. * ''Rear-mounted auxiliary transmission'' -- mounted at the rear axle housing, and attached between it and the driveshaft, to add additional gear ratios. * ''Multi-speed axle'' -- designed to fit ''inside'' the differential's housing, to add additional gear ratios. Murray Fahnestock, a Ford expert in the era of the Model T, particularly advised the use of auxiliary transmissions for the enclosed Model T's, such as the Ford Sedan and Coupelet, for three reasons: their greater weight put more strain on the drivetrain and engine, which auxiliary transmissions could smooth out; their bodies acted as sounding boards, echoing engine noise and vibration at higher engine speeds, which could be lessened with intermediate gears; and owners of the enclosed cars spent more to buy them, and thus likely had more money with which to enhance them. He also noted that auxiliary transmissions were valuable for Ford Ton-Trucks in commercial use, allowing for driving speeds to vary with their widely variable loads -- particularly when returning empty -- possibly saving as much as 50% of returning drive time.


Suspension and wheels

Model T suspension employed a transversely mounted semi-elliptical spring for each of the front and rear beam axles which allowed a great deal of wheel movement to cope with the dirt roads of the time. The front axle was
drop forged Forging is a manufacturing process involving the shaping of metal using localized compressive forces. The blows are delivered with a hammer (often a power hammer) or a die. Forging is often classified according to the temperature at which it ...
as a single piece of vanadium steel. Ford twisted many axles through eight full rotations (2880 degrees) and sent them to dealers to be put on display to demonstrate its superiority. The Model T did not have a modern service brake. The right foot pedal applied a band around a drum in the transmission, thus stopping the rear wheels from turning. The previously mentioned parking brake lever operated band brakes acting on the inside of the rear brake drums, which were an integral part of the rear wheel hubs. Optional brakes that acted on the outside of the brake drums were available from aftermarket suppliers. Wheels were wooden artillery wheels, with steel welded-spoke wheels available in 1926 and 1927. Tires were
pneumatic Pneumatics (from Greek ‘wind, breath’) is a branch of engineering that makes use of gas or pressurized air. Pneumatic systems used in Industrial sector, industry are commonly powered by compressed air or compressed inert gases. A central ...
clincher type, in diameter, wide in the rear, in the front. Clinchers needed much higher pressure than today's tires, typically , to prevent them from leaving the rim at speed. Flat tires were a common problem. Balloon tires became available in 1925. They were all around. Balloon tires were closer in design to today's tires, with steel wires reinforcing the tire bead, making lower pressure possible – typically – giving a softer ride. The steering gear ratio was changed from 4:1 to 5:1 with the introduction of balloon tires. The old nomenclature for tire size changed from measuring the outer diameter to measuring the rim diameter so (rim diameter) × (tire width) wheels has about the same outer diameter as clincher tires. All tires in this time period used an inner tube to hold the pressurized air; tubeless tires were not generally in use until much later. Wheelbase is and standard track width was – track could be obtained on special order, "for Southern roads", identical to the pre-Civil War track gauge for many railroads in the former
Confederacy Confederacy or confederate may refer to: States or communities * Confederate state or confederation, a union of sovereign groups or communities * Confederate States of America, a confederation of secessionist American states that existed between ...
. The standard 56-inch track being very near the inch standard railroad track gauge, meant that Model Ts could be and frequently were, fitted with flanged wheels and used as motorized railway vehicles or "speeders". The availability of a version meant the same could be done on the few remaining Southern railways – these being the only nonstandard lines remaining, except for a few narrow-gauge lines of various sizes. Although a Model T could be adapted to run on track as narrow as gauge (Wiscasset, Waterville and Farmington RR, Maine has one), this was a more complex alteration.


Colors

By 1918, half of all the cars in the U.S. were Model Ts. In his autobiography, Ford reported that in 1909 he told his management team, "Any customer can have a car painted any color that he wants so long as it is black." However, in the first years of production from 1908 to 1913, the Model T was ''not'' available in black,. but rather only in gray, green, blue, and red. Green was available for the touring cars, town cars, coupes, and Landaulets. Gray was available for the town cars only and red only for the touring cars. By 1912, all cars were being painted midnight blue with black fenders. Only in 1914 was the "any color so long as it is black" policy finally implemented. It is often stated Ford suggested the use of black from 1914 to 1925 due to the low cost, durability, and faster drying time of black paint in that era. There is no evidence that black dried any faster than any other dark varnishes used at the time for painting, but carbon black pigment was indeed one of the cheapest (if not the cheapest) available, and dark color of gilsonite, a form of bitumen making cheap metal paints of the time durable, limited the (final) color options to dark shades of maroon, blue, green or black. At that period Ford used two similar types of the so-called Japan black paint, one as a basic coat applied directly to the metal and another as a final finish. Paint choices in the American automotive industry, as well as in others (including locomotives, furniture, bicycles, and the rapidly expanding field of electrical appliances), were shaped by the development of the
chemical industry The chemical industry comprises the companies that produce industrial chemicals. Central to the modern world economy, it converts raw materials (oil, natural gas, air, water, metals, and minerals) into more than 70,000 different products. The ...
. These included the disruption of dye sources during World War I and the advent, in the mid-1920s, of new nitrocellulose lacquers that were faster-drying and more scratch-resistant and obviated the need for multiple coats.. Understanding the choice of paints for the Model T era and the years immediately following requires an understanding of the contemporaneous chemical industry. During the lifetime production of the Model T, over 30 types of black paint were used on various parts of the car. These were formulated to satisfy the different means of applying the paint to the various parts, and had distinct drying times, depending on the part, paint, and method of drying.


Body

File:1910Ford-T.jpg, 1910 Model T, photographed in Salt Lake City File:Ford_T_1917.jpg, 1917 Model T File:1915 Ford Model T (01).jpg, 1915 Model T Speedster File:1925.ford.model.t.arp.750pix.jpg, 1925 Ford "New Model" T Tudor sedan Although Ford classified the Model T with a single letter designation throughout its entire life and made no distinction by model years, enough significant changes to the body were made over the production life that the car may be classified into several style generations. The most immediately visible and identifiable changes were in the hood and cowl areas, although many other modifications were made to the vehicle. * 1909–1914 – Characterized by a nearly straight, five-sided hood, with a flat top containing a center hinge and two side sloping sections containing the folding hinges. The firewall is flat from the windshield down with no distinct cowl. For these years, acetylene gas flame headlights were used because the flame is resistant to wind and rain. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. The fuel tank is placed under the front seat. * 1915–1916 – The hood design is nearly the same five-sided design with the only obvious change being the addition of louvers to the vertical sides. A significant change to the cowl area occurred with the windshield relocated significantly behind the firewall and joined with a compound-contoured cowl panel. In these years electric headlights replaced carbide headlights. * 1917–1923 – The hood design was changed to a tapered design with a curved top. The folding hinges were now located at the joint between the flat sides and the curved top. This is sometimes referred to as the "low hood" to distinguish it from the later hoods. The back edge of the hood now met the front edge of the cowl panel so that no part of the flat firewall was visible outside of the hood. This design was used the longest and during the highest production years, accounting for about half of the total number of Model Ts built. * 1923–1925 – This change was made during the 1923 calendar year, so models built earlier in the year have the older design, while later vehicles have the newer design. The taper of the hood was increased and the rear section at the firewall is about an inch taller and several inches wider than the previous design. While this is a relatively minor change, the parts between the third and fourth generations are not interchangeable. * 1926–1927 – This design change made the greatest difference in the appearance of the car. The hood was again enlarged, with the cowl panel no longer a compound curve and blended much more with the line of the hood. The distance between the firewall and the windshield was also increased significantly. This style is sometimes referred to as the "high hood". The styling on the last "generation" was a preview for the following Model A, but the two models are visually quite different, as the body on the A is much wider and has curved doors as opposed to the flat doors on the T.


Diverse applications

File:Model T tractor.png, A Model T homemade tractor pulling a plow File:Pullford auto-to-tractor conversion advert 1918.png, Pullford auto-to-tractor conversion advertisement, 1918 File:Ford-American LaFrance 1919 Model-T firefighting vehicle.jpg, The American LaFrance company modified more than 900 Ford Model Ts to serve firefighters When the Model T was designed and introduced, the infrastructure of the world was quite different from today's. Pavement was a rarity except for sidewalks and a few big-city streets. (The meaning of the term "pavement" as opposed to "sidewalk" comes from that era, when streets and roads were generally dirt and sidewalks were a paved way to walk along them.) Agriculture was the occupation of many people. Power tools were scarce outside factories, as were power sources for them; electrification, like pavement, was found usually only in larger towns. Rural electrification and motorized mechanization were embryonic in some regions and nonexistent in most. Henry Ford oversaw the requirements and design of the Model T based on contemporary realities. Consequently, the Model T was (intentionally) almost as much a tractor and
portable engine A portable engine is an engine, either a steam engine or an internal combustion engine, that sits in one place while operating (providing power to machinery), but (unlike a stationary engine) is wikt:portable#Adjective, portable and thus can be ...
as it was an automobile. It has always been well regarded for its all-terrain abilities and ruggedness. It could travel a rocky, muddy farm lane, cross a shallow stream, climb a steep hill, and be parked on the other side to have one of its wheels removed and a pulley fastened to the hub for a
flat belt A belt is a loop of flexible material used to link two or more rotating Drive shaft, shafts mechanically, most often parallel. Belts may be used as a source of motion, to Transmission (mechanics), transmit power efficiently or to track relative m ...
to drive a bucksaw, thresher, silo blower, conveyor for filling
corn crib A corn crib or corncrib is a type of granary used to dry and store corn. It may also be known as a cornhouse or corn house. Overview After the harvest and while still on the cob, corn is placed in the crib either with or without the husk. The ...
s or haylofts,
baler A baler or hay baler is a piece of farm machinery used to compress a cut and raked crop (such as hay, cotton, flax straw, salt marsh hay, or silage) into compact bales that are easy to handle, transport, and store. Often, bales are configured ...
, water pump, electrical generator, and many other applications. One unique application of the Model T was shown in the October 1922 issue of ''Fordson Farmer'' magazine. It showed a minister who had transformed his Model T into a mobile church, complete with small organ. During this era, entire automobiles (including thousands of Model Ts) were hacked apart by their owners and reconfigured into custom machinery permanently dedicated to a purpose, such as homemade tractors and ice saws. Dozens of aftermarket companies sold prefab kits to facilitate the T's conversion from car to tractor.. The Model T had been around for a decade before the Fordson tractor became available (1917–18), and many Ts had been converted for field use. (For example,
Harry Ferguson Henry George "Harry" Ferguson (4 November 188425 October 1960) was a British mechanic and inventor who is noted for his role in the development of the modern agricultural tractor and its three point linkage system, for being the first person ...
, later famous for his hitches and tractors, worked on Eros Model T tractor conversions before he worked with Fordsons and others.) During the next decade, Model T tractor conversion kits were harder to sell, as the Fordson and then the Farmall (1924), as well as other light and affordable tractors, served the farm market. But during the Depression (1930s), Model T tractor conversion kits had a resurgence, because by then used Model Ts and junkyard parts for them were plentiful and cheap.. Like many popular car engines of the era, the Model T engine was also used on home-built aircraft (such as the
Pietenpol Sky Scout The Pietenpol Sky Scout is a parasol wing homebuilt aircraft designed by Bernard H. Pietenpol. Development The Sky Scout was a lower cost follow-on to the Pietenpol's first homebuilt design, the Pietenpol Air Camper. Using a lower cost Ford Mode ...
) and motorboats. An armored-car variant (called the " FT-B") was developed in Poland in 1920 due to the high demand during the Polish-Soviet war in 1920. Many Model Ts were converted into vehicles that could travel across heavy snows with kits on the rear wheels (sometimes with an extra pair of rear-mounted wheels and two sets of
continuous track Continuous track is a system of vehicle propulsion used in tracked vehicles, running on a continuous band of treads or track plates driven by two or more wheels. The large surface area of the tracks distributes the weight of the vehicle b ...
to mount on the now-tandemed rear wheels, essentially making it a half-track) and skis replacing the front wheels. They were popular for rural mail delivery for a time. The common name for these conversions of cars and small trucks was "snowflyers". These vehicles were extremely popular in the northern reaches of Canada, where factories were set up to produce them. A number of companies built Model T–based railcars. In ''
The Great Railway Bazaar ''The Great Railway Bazaar: By Train Through Asia'' is a travelogue by American novelist Paul Theroux, first published in 1975. It recounts Theroux's four-month journey by train in 1973 from London through Europe, the Middle East, the Indian sub ...
'', Paul Theroux mentions a rail journey in India on such a railcar. The New Zealand Railways Department's RM class included a few. The American LaFrance company modified more than 900 Model Ts for use in firefighting, adding tanks, hoses, tools and a bell. Model T fire engines were in service in North America, Europe, and Australia. A 1919 Model T equipped to fight chemical fires has been restored and is on display at the
North Charleston Fire Museum The North Charleston Fire Museum and Educational Center is a fire museum in North Charleston, South Carolina, displaying a collection of fire fighting vehicles dating back to the 1780s. On permanent loan from the American LaFrance, American LaFran ...
in South Carolina.


Production


Mass production

The knowledge and skills needed by a factory worker were reduced to 84 areas. When introduced, the T used the building methods typical at the time, assembly by hand, and production was small. The Ford Piquette Avenue Plant could not keep up with demand for the Model T, and only 11 cars were built there during the first full month of production. More and more machines were used to reduce the complexity within the 84 defined areas. In 1910, after assembling nearly 12,000 Model Ts, Henry Ford moved the company to the new Highland Park complex. During this time the Model T production system ( including the
supply chain In commerce, a supply chain is a network of facilities that procure raw materials, transform them into intermediate goods and then final products to customers through a distribution system. It refers to the network of organizations, people, acti ...
) transitioned into an iconic example of assembly-line production. In subsequent decades it would also come to be viewed as the classic example of the rigid, first-generation version of assembly line production, as opposed to flexible mass production of higher quality products. As a result, Ford's cars came off the line in three-minute intervals, much faster than previous methods, reducing production time from hours before to 93 minutes by 1914, while using less manpower.. In 1914, Ford produced more cars than all other automakers combined. The Model T was a great commercial success, and by the time Ford made its 10 millionth car, half of all cars in the world were Fords. It was so successful Ford did not purchase any advertising between 1917 and 1923; instead, the Model T became so famous, people considered it a norm. More than 15 million Model Ts were manufactured in all, reaching a rate of 9,000 to 10,000 cars a day in 1925, or 2 million annually, more than any other model of its day, at a price of just $260 ($ today). Total Model T production was finally surpassed by the Volkswagen Beetle on February 17, 1972, while the Ford F-Series (itself directly descended from the Model T roadster pickup) has surpassed the Model T as Ford's all-time best-selling model. Henry Ford's ideological approach to Model T design was one of getting it right and then keeping it the same; he believed the Model T was all the car a person would, or could, ever need. As other companies offered comfort and styling advantages, at competitive prices, the Model T lost market share and became barely profitable. Design changes were not as few as the public perceived, but the idea of an unchanging model was kept intact. Eventually, on May 26, 1927, Ford Motor Company ceased US production and began the changeovers required to produce the Model A. Some of the other Model T factories in the world continued for a short while, with the final Model T produced at the Cork, Ireland plant in December 1928. Model T engines continued to be produced until August 4, 1941. Almost 170,000 were built after car production stopped, as replacement engines were required to service the many existing vehicles. Racers and enthusiasts, forerunners of modern hot rodders, used the Model Ts' blocks to build popular and cheap racing engines, including Cragar, Navarro, and, famously, the Frontenacs ("Fronty Fords") of the
Chevrolet Chevrolet ( ), colloquially referred to as Chevy and formally the Chevrolet Motor Division of General Motors Company, is an American automobile division of the American manufacturer General Motors (GM). Louis Chevrolet (1878–1941) and ous ...
brothers, among many others. The Model T employed some advanced technology, for example, its use of
vanadium steel Vanadium is a chemical element with the symbol V and atomic number 23. It is a hard, silvery-grey, malleable transition metal. The elemental metal is rarely found in nature, but once isolated artificially, the formation of an oxide layer ( passi ...
alloy. Its durability was phenomenal, and some Model Ts and their parts are in running order over a century later. Although Henry Ford resisted some kinds of change, he always championed the advancement of materials engineering, and often mechanical engineering and industrial engineering. In 2002, Ford built a final batch of six Model Ts as part of their 2003 centenary celebrations. These cars were assembled from remaining new components and other parts produced from the original drawings. The last of the six was used for publicity purposes in the UK. Although Ford no longer manufactures parts for the Model T, many parts are still manufactured through private companies as replicas to service the thousands of Model Ts still in operation today. On May 26, 1927, Henry Ford and his son Edsel drove the 15-millionth Model T out of the factory. This marked the famous automobile's official last day of production at the main factory.


Price and production

The moving assembly line system, which started on October 7, 1913, allowed Ford to reduce the price of his cars. As he continued to fine-tune the system, Ford was able to keep reducing costs significantly. As volume increased, he was able to also lower the prices due to some of the fixed costs being spread over a larger number of vehicles as large supply chain investments increased assets per vehicle. Other factors reduced the price such as material costs and design changes. As Ford had market dominance in North America during the 1910s, other competitors reduced their prices to stay competitive, while offering features that weren't available on the ModelT such as a wide choice of colors, body styles and interior appearance and choices, and competitors also benefited from the reduced costs of raw materials and infrastructure benefits to supply chain and ancillary manufacturing businesses. In 1909, the cost of the Runabout started at . By 1925 it had been lowered to . The figures below are US production numbers compiled by R.E. Houston, Ford Production Department, August 3, 1927. The figures between 1909 and 1920 are for Ford's fiscal year. From 1909 to 1913, the fiscal year was from October 1 to September 30 the following calendar year with the year number being the year in which it ended. For the 1914 fiscal year, the year was October 1, 1913, through July 31, 1914. Starting in August 1914, and through the end of the ModelT era, the fiscal year was August 1 through July 31. Beginning with January 1920, the figures are for the calendar year. The above tally includes a total of 14,689,525 vehicles. Ford said the last ModelT was the 15 millionth vehicle produced.


Recycling

Henry Ford used wood scraps from the production of Model Ts to make charcoal briquettes. Originally named Ford Charcoal, the name was changed to
Kingsford Charcoal Kingsford is a brand of charcoal briquette used for grilling, along with related products. Established in 1920, the brand is owned by The Clorox Company. Currently, the Kingsford Products Company remains the leading manufacturer of charcoal in t ...
after the Iron Mountain Ford Plant closed in 1951 and the Kingsford Chemical Company was formed and continued the wood distillation process. E. G. Kingsford, Ford's cousin by marriage, brokered the selection of the new sawmill and wood distillation plant site. Lumber for production of the Model T came from the same location, built-in 1920 called the Iron Mountain Ford which incorporated a sawmill where lumber from Ford purchased land in the Upper Peninsula of Michigan was cut and dried. Scrap wood was distilled at the Iron Mountain plant for its wood chemicals, including
methanol Methanol (also called methyl alcohol and wood spirit, amongst other names) is an organic chemical and the simplest aliphatic alcohol, with the formula C H3 O H (a methyl group linked to a hydroxyl group, often abbreviated as MeOH). It is a ...
(wood alcohol), with the end by-product being lump charcoal. This lump charcoal was modified and pressed into briquettes and mass-marketed by Ford.


First global car

File:Ford factory LaBoca.jpg, The first Ford assembly plant in
La Boca, Buenos Aires La Boca (; "the Mouth", probably of the Matanza River) is a neighborhood ('' barrio'') of Buenos Aires, the capital of Argentina. It retains a strong Italian flavour, many of its early settlers having originated in the city of Genoa. Geography ...
, c. 1921 File:Feature. Model T Ford BAnQ P48S1P16620.jpg, A 1923 Ford T in Canada, photographed in 1948
The Ford Model T was the first automobile built by various countries simultaneously, since they were being produced in Walkerville, Canada, and in Trafford Park, Greater Manchester, England, starting in 1911 and were later assembled in Germany, Argentina, France, Spain, Denmark, Norway, Belgium, Brazil, Mexico, and
Japan Japan ( ja, 日本, or , and formally , ''Nihonkoku'') is an island country in East Asia. It is situated in the northwest Pacific Ocean, and is bordered on the west by the Sea of Japan, while extending from the Sea of Okhotsk in the north ...
, as well as several locations throughout the US. Ford made use of the knock-down kit concept almost from the beginning of the company as freight and production costs from Detroit had Ford assembling vehicles in major metropolitan centers of the US. The Aeroford was an English automobile manufactured in
Bayswater Bayswater is an area within the City of Westminster in West London. It is a built-up district with a population density of 17,500 per square kilometre, and is located between Kensington Gardens to the south, Paddington to the north-east, and ...
, London, from 1920 to 1925. It was a Model T with a distinct hood and grille to make it appear to be a totally different design, what later was called
badge engineering In the automotive industry, rebadging is a form of market segmentation used by automobile manufacturers around the world. To allow for product differentiation without designing or engineering a new model or brand (at high cost or risk), a manu ...
. The Aeroford sold from £288 in 1920, dropping to £168–214 by 1925. It was available as a two-seater, four-seater, or
coupé A coupe or coupé (, ) is a passenger car with a sloping or truncated rear roofline and two doors. The term ''coupé'' was first applied to horse-drawn carriages for two passengers without rear-facing seats. It comes from the French past parti ...
.


Advertising and marketing

Ford created a massive publicity machine in Detroit to ensure every newspaper carried stories and advertisements about the new product. Ford's network of local dealers made the car ubiquitous in virtually every city in North America. A large part of the success of Ford's Model T stems from the innovative strategy which introduced a large network of sales hubs making it easy to purchase the car. As independent dealers, the franchises grew rich and publicized not just the Ford but the very concept of automobiling; local motor clubs sprang up to help new drivers and to explore the countryside. Ford was always eager to sell to farmers, who looked on the vehicle as a commercial device to help their business. Sales skyrocketed – several years posted around 100 percent gains on the previous year.


24 Hours of Le Mans

Parisian Ford dealer
Charles Montier Charles Pierre Elie Montier (28 June 1879 – June 1952) was a French racing driver and automotive engineer whose race entries included the inaugural 24 Hours of Le Mans. Montier, with his father Elie and friend Gillet, built a steam car – th ...
and his brother-in-law
Albert Ouriou Charles Pierre Elie Montier (28 June 1879 – June 1952) was a French racing driver and automotive engineer whose race entries included the inaugural 24 Hours of Le Mans. Montier, with his father Elie and friend Gillet, built a steam car – the ...
entered a heavily modified version of the Model T (the "Montier Special") in the first three
24 Hours of Le Mans The 24 Hours of Le Mans (french: link=no, 24 Heures du Mans) is an endurance-focused Sports car racing, sports car race held annually near the town of Le Mans, France. It is the world's oldest active Endurance racing (motorsport), endurance r ...
. They finished 14th in the inaugural 1923 race.


Car clubs

Today, four main clubs exist to support the preservation and restoration of these cars: the Model T Ford Club International, the Model T Ford Club of America and the combined clubs of Australia. With many chapters of clubs around the world, the Model T Ford Club of Victoria has a membership with a considerable number of uniquely Australian cars. (Australia produced its own car bodies, and therefore many differences occurred between the Australian bodied tourers and the US/Canadian cars.) In the UK, the Model T Ford Register of Great Britain celebrated its 50th anniversary in 2010. Many steel Model T parts are still manufactured today, and even fiberglass replicas of their distinctive bodies are produced, which are popular for T-bucket style
hot rod Hot rods are typically American cars that might be old, classic, or modern and that have been rebuilt or modified with large engines optimised for speed and acceleration. One definition is: "a car that's been stripped down, souped up and made ...
s (as immortalized in the Jan and Dean surf music song "Bucket T", which was later recorded by The Who). In 1949, more than twenty years after the end of production, 200,000 Model Ts were registered in the United States. In 2008, it was estimated that about 50,000 to 60,000 Ford Model Ts remain roadworthy.


Gallery

File:Ford Model T 1909 Serial337 LFront Lake Mirror Cassic 16Oct2010 (14854254936).jpg, 1909 touring (a very early example with two-pedal, two-lever control) File:1909 Ford Model T Roadster - Donald F Yoder - Old Car Festival 2013 (9697385671).jpg, 1909 roadster File:Old cars in Huron County, Ontario.jpg, 1909 Tourabout (like the touring, but without rear doors) File:DSC04225 (44038630681).jpg, 1911 touring File:1911 Ford Model T Torpedo Runabout (18604642102).jpg, 1911 Torpedo Runabout File:1911 Ford Model T (12402527964).jpg, 1911 Open Runabout File:1912 Ford T Open Touring 4 cylinder 24hp pic1.JPG, 1912 touring File:Ford Model T 1X7A7914.jpg, 1912 commercial roadster File:1912 Ford Model T Torpedo Runabout (30908171700).jpg, 1912 Torpedo Runabout File:26th Annual New London to New Brighton Antique Car Run (7750062766).jpg, 1912 delivery car File:Ford Model T 3-door Tourer (1913).jpg, 1913 Touring File:Ford Model T Roadster.jpg, 1913 Runabout File:Take a ride in a real Model T - panoramio.jpg, 1914 touring File:Corbridge Classic Car Show 2013 (9231371881).jpg, 1914 Runabout File:1915 Ford Model T Runabout.jpg, 1915 Runabout – with curved cowl panel File:1916 Ford Model T touring car.JPG, 1916 touring File:1917 Ford Model T Runabout.jpg, 1917 Runabout – with new curved hood matches cowl panel File:1919 Ford Model T Runabout GMR995.jpg, 1919 Runabout File:1920 Ford Model T Touring 3.jpg, 1920 touring File:1921 Ford Model T.jpg, 1921 Ford Model T File:1921 Ford Model T Touring 2.jpg, 1921 touring File:Vintage Car Museum & Event Center May 2017 22 (1922 Ford Model T Runabout).jpg, 1922 Runabout File:1922 Ford Model T table top truck (6712896055).jpg, 1922 flatbed truck File:1923 Ford Model T Depot Hack.jpg, 1923 Ford Model T depot hack File:1923 Ford Model T Runabout AZW456.jpg, 1923 Runabout (early '23 model) File:1924 Ford Model T Touring CX 894.jpg, 1924 touring – with higher hood and slightly shorter cowl panel – late-1923 models were similar File:1924-1925 Ford - T Roadster, Coimbatore (2).jpg, 1924–1925 Runabout File:1925 Ford Model T touring.jpg, 1925 touring – with the balloon tires and split rims, optional extras of the period. File:1925 Ford Model T Touring.jpg, 1925 touring File:1926 Ford Model T Runabout ECH956.jpg, 1926 Runabout – with higher hood and longer cowl panel File:1927 Ford Model T Runabout.jpg, 1927 Runabout File:Ford Model T - Serial No. 15,000,000, Built May 1927.jpg, 1927 touring – last Ford Model T built at Highland Park Ford Plant File:1928 Model A Ford.jpg, 1928 Ford Model A Tudor sedan – shown for comparison, with wider body and curved doors


See also

*
Lakeside Foundry The Lakeside Foundry was located in Detroit, Michigan, United States. It still stands, although is no longer in business. It is on Lycaste St. South of Jefferson between Jefferson and Freud between St. Jean and Clairpointe. It opened in the late ...
* New Zealand RM class (Model T Ford) – a 1925 experimental railcar based on a Model T powertrain * Piper J-3 Cub, the 1930s/40s American light aircraft that developed a similar degree of ubiquity in general aviation circles to the Model T


Notes and references


Bibliography

* * * * * * * * * * * * * * * * * *


External links


FordModelT.net – Resource for Model T Owners and EnthusiastsModel T Ford Club of America (USA)Model T Ford Club International
*
First
an
second
web pages of Old Rhinebeck Aerodrome's vintage vehicle collection, featuring five Model T-based vehicles {{Authority control 1900s cars 1910s cars 1920s cars Brass Era vehicles Cars introduced in 1908 Convertibles Model T Full-size vehicles History of Detroit 1908 establishments in the United States Motor vehicles manufactured in the United States Pickup trucks Front mid-engine, rear-wheel-drive vehicles