HOME

TheInfoList



OR:

The Corolla E70 was the fourth generation of cars sold by
Toyota is a Japanese multinational automotive manufacturer headquartered in Toyota City, Aichi, Japan. It was founded by Kiichiro Toyoda and incorporated on . Toyota is one of the largest automobile manufacturers in the world, producing about 10 ...
under the Corolla nameplate. The fourth-generation model was released in March 1979 in Japan, and was the last generation to have the entire lineup in
rear-wheel-drive Rear-wheel drive (RWD) is a form of engine and transmission layout used in motor vehicles, in which the engine drives the rear wheels only. Until the late 20th century, rear-wheel drive was the most common configuration for cars. Most rear-wheel ...
configuration. Export sales commenced in August 1979. Although most of the fourth generation was replaced by 1984, the
station wagon A station wagon ( US, also wagon) or estate car ( UK, also estate), is an automotive body-style variant of a sedan/saloon with its roof extended rearward over a shared passenger/cargo volume with access at the back via a third or fifth door ( ...
and van versions were offered into late 1987. In 1980 Corolla daily production reached an all-time high, averaging 2,346 units. The one-millionth Corolla was a 70-series, built in February 1983. A limited "One Million Edition" was released in Japan at this time.'' Car Graphic: '80s Car Archives'', p. 16


Development

This generation (apart from the wagon) got a new rear
coil spring A selection of conical coil springs The most common type of spring is the coil spring, which is made out of a long piece of metal that is wound around itself. Coil springs were in use in Roman times, evidence of this can be found in bronze Fib ...
five-link rear end with a
panhard rod A Panhard rod (also called Panhard bar, track bar, or track rod) is a suspension link that provides lateral location of the axle. Originally invented by the Panhard automobile company of France in the early twentieth century, this device has been ...
(two years after its main Japanese rival the
Nissan Sunny The is an automobile built by the Japanese automaker Nissan from 1966 to 2006. In the early 1980s, the brand changed from Datsun to Nissan in line with other models by the company. Although production of the Sunny in Japan ended in 2006, the na ...
had made the same change), and the wheelbase was longer at 94.5 in (2,400 mm). A new 1.8 L (1,770 cc/108 in³) '' 3T'' engine was optional to some markets, while parts of the world retained the old '' 4K''. The most notable
inline-four engine A straight-four engine (also called an inline-four) is a four-cylinder piston engine where cylinders are arranged in a line along a common crankshaft. The vast majority of automotive four-cylinder engines use a straight-four layout (with the ...
advancement came in 1979 and 1983, however, as Toyota began offering the 1.5 L (1,452 cc) 3A-U and 1.6 L (1,587 cc/96 in³) 4A-C engines respectively. The aluminum head,
SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
engines, although bulkier in size and weight than the K and T engines it was offered alongside, was a grand step up in performance. This would be the last generation of Corollas to use any
pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
or
alloy An alloy is a mixture of chemical elements of which at least one is a metal. Unlike chemical compounds with metallic bases, an alloy will retain all the properties of a metal in the resulting material, such as electrical conductivity, ductility, ...
cylinder head In an internal combustion engine, the cylinder head (often abbreviated to simply "head") sits above the cylinders and forms the roof of the combustion chamber. In sidevalve engines, the head is a simple sheet of metal; whereas in more modern ov ...
engines, as
Toyota is a Japanese multinational automotive manufacturer headquartered in Toyota City, Aichi, Japan. It was founded by Kiichiro Toyoda and incorporated on . Toyota is one of the largest automobile manufacturers in the world, producing about 10 ...
made the decision to focus exclusively on
aluminium Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. I ...
head A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple animals may ...
, OHC engine design from this point forward. This was the first generation to have power steering. In the US market, this was introduced in 1981 for the 1982 model year. Various facelifts were made during production. In 1979–1980, a four-round headlamp setup was used in most markets. A restyle for 1981 involved two rectangular headlamps. A more extensive facelift was given for 1982, involving a new sloping nose with wraparound headlights, remodeled taillights and new bumpers, which on some models were rubber moulded. From August 1983 (subsequent to the changeover to front-wheel drive for the rest of the range) the Corolla Van received a new 1.5-litre 5K-J engine as well as a light restyling, and also a roof raised by . The Wagon/Van underwent a final light facelift in August 1985, including an upgraded 1C-II engine for the diesels.'' Car Graphic: '80s Car Archives'', p. 18 It also received seats that could be folded nearly flat to make the car beddable, and continued in production until being replaced by the 90-series Corolla Van/Wagon in August 1987.


Design

Design work was started in 1974 by Fumio Agetsuma. The goals he told his team were:"The Toyota Corolla story", Toyota publication KE-CS/E-8003/D/No.85527/23200, March 1980 * Quiet cars will have a definite edge. Conservation of both resources and fuel will be very important. Economy and value will also carry considerable weight. * Our new Corolla must be as aerodynamically perfect as the parameters allow. It must be comfortable, with enough interior room to move about in. It will need all the modern features that future customers will want as well. * Corolla must change. But we should never destroy the popular base upon which Corolla sales are built. Our new car must reflect the wishes of the consumer, the ordinary people who drive Corollas. * There should be no generation gap with Corolla. It should appeal to young and old alike. Corolla must also transcend national boundaries. It must perform as well in sub-zero temperatures as it does in the tropics or in the heat of the deserts of the world. Above all, Corolla must be a car that pleases. * Corolla has an illustrious tradition. Now, let us build our new Corolla on that tradition, the kind of new Corolla we know the drivers of the world will expect.


Japan

In Japan, where it was introduced in March 1979, the Corolla was offered in all body styles: two-door Sedan, four-door Sedan, two-door Hardtop Coupé, three-door Coupé, and three-door Liftback Coupé. The three- or five-door Van models were added to the lineup in August 1979; until then the old 30-series Van had continued to be available. This was also when the 1.8-litre 13T engine first became available in the domestic Japanese market. The Levin continued as a coupé, with a sporting four-door sedan called the Corolla GT also available. February 1982 saw the introduction of the Toyota 1C diesel engine installed in the Corolla sedan. This car was exclusive to the ''
Toyota Diesel Store Toyota vehicles in Japan are distributed to numerous dealership chains throughout the country. Up to May 2020, each dealership chain had a different product offering, with some models restricted to one chain to maintain exclusivity. Since May 2020, ...
'' to encourage sales at the largely commercial truck retailer for Toyota in Japan, alongside the larger, diesel-engined
Toyota Vista The Toyota Camry (; Japanese: トヨタ・カムリ ''Toyota Kamuri'') is an automobile sold internationally by the Japanese auto manufacturer Toyota since 1982, spanning multiple generations. Originally compact in size (narrow-body), the Camry ...
. At the same time, the Van was no longer available with the 1.6-litre gasoline engine, but the five-door KE73G wagon was introduced as the first Corolla Wagon to be sold in Japan (rather than the "van" commercial car). The Van/Wagon continued to be offered until August 1987, skipping the first front-wheel-drive generation of Corollas. After the introduction of the front-wheel drive E80-series Corolla, the Van range received a facelift and a new set of chassis codes (KE72V, KE74V, CE71V). Japanese market engines: * 4K-U — 1.3 L (1290 cc) I4, 8-valve
pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
, carb, (KE70, KE73G) * 4K-J — 1.3 L (1290 cc) I4, 8-valve
pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
, carb, (KE71V, KE72V, van only) in later models * 5K-J — 1.5 L (1496 cc) I4, 8-valve
pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
, carb, (KE74V, van only) * 3A-UI4, 8-valve
SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
, carb, (AE70) * 12T-J — 1.6 L (1588 cc) I4, 8-valve pushrod, carb, (TE73V, TE74V from August 1981) * 2T-GEU — 1.6 L (1588 cc) I4, 8-valve
DOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
, EFI, (TE71) * 13T-UI4, 8-valve
pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
, '' Car Graphic: '80s Car Archives'', p. 17 (TE70) * 3T-UI4, 8-valve
pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
(TE72) * 1C – 1.8 L I4
diesel Diesel may refer to: * Diesel engine, an internal combustion engine where ignition is caused by compression * Diesel fuel, a liquid fuel used in diesel engines * Diesel locomotive, a railway locomotive in which the prime mover is a diesel engin ...
, (CE70, CE71V)


North America

The E70-series Corolla Hardtop and Liftback models were among the last true pillarless
hardtop A hardtop is a rigid form of automobile roof, which for modern cars is typically constructed from metal. A hardtop roof can be either fixed (i.e. not removable), Convertible#Detachable hardtop, detachable for separate storing or retractable ha ...
s available in the United States. These models used the same 13-inch styled steel wheels and trim rings that graced the U.S-market 1974–75 Celica GT. North American market engines: * 3T-C — 1.8 L (1,770 cc) I4, 8-valve
Pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
, carb, 75 hp (56 kW) * 4A-C — 1.6 L (1,587 cc) I4, 8-valve
SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
, carb, 90 hp (67 kW) North American market VDS: * E71 — Sedan, 2-door/4-door (Std, DX) * E71 —
Wagon A wagon or waggon is a heavy four-wheeled vehicle pulled by draught animals or on occasion by humans, used for transporting goods, commodities, agricultural materials, supplies and sometimes people. Wagons are immediately distinguished from ...
, 5-door (Std, DX) * E71 —
Hardtop A hardtop is a rigid form of automobile roof, which for modern cars is typically constructed from metal. A hardtop roof can be either fixed (i.e. not removable), Convertible#Detachable hardtop, detachable for separate storing or retractable ha ...
, 2-door (SR5) * E71 —
Coupé A coupe or coupé (, ) is a passenger car with a sloping or truncated rear roofline and two doors. The term ''coupé'' was first applied to horse-drawn carriages for two passengers without rear-facing seats. It comes from the French past parti ...
, 2-door (SR5) * E71 —
Liftback A liftback is a variation of hatchback with a sloping roofline between 45 and 5 degrees. Traditional hatchback designs usually have a 90 to 46 degree slope on the tailgate or rear door. As such the liftback is essentially a hatchback with a more ...
, 3-door (Std, SR5) * E72 — Sedan, 5-door (Std, DX) * E72 —
Wagon A wagon or waggon is a heavy four-wheeled vehicle pulled by draught animals or on occasion by humans, used for transporting goods, commodities, agricultural materials, supplies and sometimes people. Wagons are immediately distinguished from ...
(Std, DLX) * E72 —
Coupé A coupe or coupé (, ) is a passenger car with a sloping or truncated rear roofline and two doors. The term ''coupé'' was first applied to horse-drawn carriages for two passengers without rear-facing seats. It comes from the French past parti ...
2-door (Std, SR5) * E72 —
Liftback A liftback is a variation of hatchback with a sloping roofline between 45 and 5 degrees. Traditional hatchback designs usually have a 90 to 46 degree slope on the tailgate or rear door. As such the liftback is essentially a hatchback with a more ...
, 3-door (Std, SR5) * E72 —
Hardtop A hardtop is a rigid form of automobile roof, which for modern cars is typically constructed from metal. A hardtop roof can be either fixed (i.e. not removable), Convertible#Detachable hardtop, detachable for separate storing or retractable ha ...
, 2-door (Std, SR5) * E75 —
Hardtop A hardtop is a rigid form of automobile roof, which for modern cars is typically constructed from metal. A hardtop roof can be either fixed (i.e. not removable), Convertible#Detachable hardtop, detachable for separate storing or retractable ha ...
, 2-door (SR5) * E75 —
Coupé A coupe or coupé (, ) is a passenger car with a sloping or truncated rear roofline and two doors. The term ''coupé'' was first applied to horse-drawn carriages for two passengers without rear-facing seats. It comes from the French past parti ...
, 2-door (SR5) * E75 —
Liftback A liftback is a variation of hatchback with a sloping roofline between 45 and 5 degrees. Traditional hatchback designs usually have a 90 to 46 degree slope on the tailgate or rear door. As such the liftback is essentially a hatchback with a more ...
, 3-door (Std, SR5)


Australia

The TE72 Liftback was marketed in Australia as the Toyota T-18 as it was originally sold alongside the previous 30-series Corolla range. Introduced in October 1979, it was fitted with a 1.8-litre engine and a five-speed transmission and was available in either standard or DeLuxe trim. 70 series sedan, wagon and panel van variants were introduced in October 1981 with a 1.3-litre engine. Facelifted models were offered from October 1983, with a 1.6-litre engine now available as an option.Toyota Corolla (KE70 Series II), www.goauto.com.au
Retrieved 6 April 2016
A special edition sedan called the "Corolla Spirit" arrived in early 1984; it received a boot spoiler, the 1.6-litre engine, chromed wheel trim, stripes, and some additional equipment. Australian market engines: * 4K-C — 1.3 L (1290 cc) I4, 8-valve
Pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
, carb, (KE70) * 4A-C — 1.6 L (1587 cc) I4, 8-valve
SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...
, carb, (AE71) * 3T-C — 1.8 L (1770 cc) I4, 8-valve
Pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
, carb, (TE72, sold as the "Toyota T-18")


Europe

Most E70-series Corollas sold in Europe were fitted with the 1.3-litre 4K engine, producing . All European market cars were rated according to DIN. There was also the 1.6-litre 2T engine with , which was also available in the wagon in some markets, as well as a twin-carburetted version of the same (the 2T-B) for the coupés and liftbacks. The 2T-B has . The twin-cam 2T-G was also listed in Europe (only with coupé/liftback bodywork), with at 6,200 rpm.'' Automobil Revue '83'', p. 518 The European twin-cam has twin carburettors rather than the fuel injection found in domestic Japanese cars. Due to their peculiar emissions regulations, the most powerful engine available to a Swiss and Swedish Liftback buyer was the 1,770 cc 3T unit, producing in 1983.'' Automobil Revue '83'', p. 157 The 1982 Swedish models produce for the 4K or 3T engines. File:Toyota Corolla 1.5 van (10654523923).jpg, Toyota Corolla 3-door van (late export model) File:Toyota Corolla E70 4 door sedan.jpg, Toyota Corolla sedan File:Toyota Corolla DX (1).jpg, Toyota Corolla 1.6 DX liftback (facelift)


Asia

This generation of Corolla was marketed in many Asian countries such as Malaysia and Indonesia. The E70 Corolla was also locally built in Indonesia, Thailand and Philippines. File:Toyota Corolla KE70 coupe, Bangladesh. (35064165470).jpg, Corolla hardtop coupé (early model; Bangladesh) File:Toyota Corolla DX (rear), Denpasar.jpg, Corolla DX KE70 sedan (facelift; Indonesia)


Motorsport

Win Percy Winston "Win" Percy (born 28 September 1943, near Tolpuddle, Dorset) is a former motor racing driver from England. Percy was British Touring Car Champion three times, and at the time of his retirement was the most successful non-Antipodean drive ...
won the 1982 British Saloon Car Championship driving an E70 series Toyota Corolla GT.


References

;Works cited: * {{Modern North American Toyota vehicles 1980s cars Cars introduced in 1979 Cars of Australia 0 70