Permit Class Submarine
   HOME

TheInfoList



OR:

The ''Permit''-class submarine (known as the ''Thresher'' class until the lead boat was lost) was a class of
nuclear-powered Nuclear power is the use of nuclear reactions to produce electricity. Nuclear power can be obtained from nuclear fission, nuclear decay and nuclear fusion reactions. Presently, the vast majority of electricity from nuclear power is produced b ...
fast
attack submarine An attack submarine or hunter-killer submarine is a submarine specifically designed for the purpose of attacking and sinking other submarines, surface combatants and merchant vessels. In the Soviet and Russian navies they were and are called "mul ...
s (
hull classification symbol The United States Navy, United States Coast Guard, and United States National Oceanic and Atmospheric Administration (NOAA) use a hull classification symbol (sometimes called hull code or hull number) to identify their ships by type and by ind ...
SSN) in service with the
United States Navy The United States Navy (USN) is the maritime service branch of the United States Armed Forces and one of the eight uniformed services of the United States. It is the largest and most powerful navy in the world, with the estimated tonnage ...
from the early 1960s until 1996. They were a significant improvement on the , with greatly improved
sonar Sonar (sound navigation and ranging or sonic navigation and ranging) is a technique that uses sound propagation (usually underwater, as in submarine navigation) to navigation, navigate, measure distances (ranging), communicate with or detect o ...
, diving depth, and silencing. They were the forerunners of all subsequent US Navy SSN designs. They served from the 1960s through to the early 1990s, when they were decommissioned due to age. They were followed by the and classes. The ''Thresher'' class was one of several results from a study commissioned in 1956 by
Chief of Naval Operations The chief of naval operations (CNO) is the professional head of the United States Navy. The position is a statutory office () held by an admiral who is a military adviser and deputy to the secretary of the Navy. In a separate capacity as a memb ...
(CNO) Admiral
Arleigh Burke Arleigh Albert Burke (October 19, 1901 – January 1, 1996) was an admiral of the United States Navy who distinguished himself during World War II and the Korean War, and who served as Chief of Naval Operations during the Eisenhower and Kenne ...
. In "
Project Nobska Project Nobska was a 1956 summer study on anti-submarine warfare (ASW) for the United States Navy ordered by Chief of Naval Operations Admiral Arleigh Burke. It is also referred to as the Nobska Study, named for its location on Nobska Point near ...
", the Committee on Undersea Warfare of the
United States National Academy of Sciences The National Academy of Sciences (NAS) is a United States nonprofit, non-governmental organization. NAS is part of the National Academies of Sciences, Engineering, and Medicine, along with the National Academy of Engineering (NAE) and the Nati ...
, collaborating with numerous other agencies, considered the lessons of
submarine warfare Submarine warfare is one of the four divisions of underwater warfare, the others being anti-submarine warfare, mine warfare and mine countermeasures. Submarine warfare consists primarily of diesel and nuclear submarines using torpedoes, missi ...
and
anti-submarine warfare Anti-submarine warfare (ASW, or in older form A/S) is a branch of underwater warfare that uses surface warships, aircraft, submarines, or other platforms, to find, track, and deter, damage, or destroy enemy submarines. Such operations are t ...
learned from various prototypes and experimental platforms. The design was managed under project SCB 188.


Design

The new class kept the proven
S5W reactor The S5W reactor is a nuclear reactor used by the United States Navy to provide electricity generation and propulsion on warships. The S5W designation stands for: * S = Submarine platform * 5 = Fifth generation core designed by the contractor * ...
plant from the immediately preceding s, but were a radical change in many other ways. The ''Thresher''s had the large bow-mounted
sonar Sonar (sound navigation and ranging or sonic navigation and ranging) is a technique that uses sound propagation (usually underwater, as in submarine navigation) to navigation, navigate, measure distances (ranging), communicate with or detect o ...
sphere and angled, amidships
torpedo tube A torpedo tube is a cylindrical device for launching torpedoes. There are two main types of torpedo tube: underwater tubes fitted to submarines and some surface ships, and deck-mounted units (also referred to as torpedo launchers) installed aboa ...
s used in the concurrently-built . This placed the sonar sphere in the optimum position for detection of targets at long range. ''Tullibee'' was an alternate design optimized for
anti-submarine warfare Anti-submarine warfare (ASW, or in older form A/S) is a branch of underwater warfare that uses surface warships, aircraft, submarines, or other platforms, to find, track, and deter, damage, or destroy enemy submarines. Such operations are t ...
, much smaller and slower than the ''Thresher''s and with a quiet turbo-electric propulsion system. Although they used the same
HY-80 HY-80 is a high-tensile, high yield strength, low alloy steel. It was developed for use in naval applications, specifically the development of pressure hulls for the US nuclear submarine program and is still currently used in many naval applicati ...
steel (
yield strength In materials science and engineering, the yield point is the point on a stress-strain curve that indicates the limit of elastic behavior and the beginning of plastic behavior. Below the yield point, a material will deform elastically and wi ...
) as the ''Skipjack''s, the ''Thresher''s
pressure hull A submarine hull has two major components, the ''light hull'' and the ''pressure hull''. The light hull (''casing'' in British usage) of a submarine is the outer non-watertight hull which provides a hydrodynamically efficient shape. The pressure ...
s were made using an improved design that extended test depth to . The engineering spaces were also redesigned, with the turbines supported on "rafts" that were suspended from the hull on isolation mounts for
acoustic quieting Acoustic quieting is the process of making machinery quieter by damping vibrations to prevent them from reaching the observer. Machinery vibrates, causing sound waves in air, hydroacoustic waves in water, and mechanical stresses in solid matter. Qu ...
. Drag was reduced, with external fittings kept to a minimum and the
sail A sail is a tensile structure—which is made from fabric or other membrane materials—that uses wind power to propel sailing craft, including sailing ships, sailboats, windsurfers, ice boats, and even sail-powered land vehicles. Sails may ...
greatly reduced in size. The small sail of ''Thresher'' (the smallest fitted to an American SSN) compensated for the increased drag of the longer hull, giving ''Thresher'' a top speed of , the same as the ''Skipjack''s, according to one recollection. However, the small sail had disadvantages as well, including room for only one
periscope A periscope is an instrument for observation over, around or through an object, obstacle or condition that prevents direct line-of-sight observation from an observer's current position. In its simplest form, it consists of an outer case with ...
and a reduced number of electronics masts, less convenient surfaced operation in rough seas, and an increased possibility of "broaching" (inadvertent surfacing) at
periscope depth A periscope is an instrument for observation over, around or through an object, obstacle or condition that prevents direct line-of-sight observation from an observer's current position. In its simplest form, it consists of an outer case with ...
in rough seas.Friedman, pp. 143–46 Only ''Thresher'' was fitted with a five-bladed symmetric
screw A screw and a bolt (see '' Differentiation between bolt and screw'' below) are similar types of fastener typically made of metal and characterized by a helical ridge, called a ''male thread'' (external thread). Screws and bolts are used to fa ...
, very similar to the ones originally fitted to the ''Skipjack''s, which allowed her to reach this speed. During
trials In law, a trial is a coming together of parties to a dispute, to present information (in the form of evidence) in a tribunal, a formal setting with the authority to adjudicate claims or disputes. One form of tribunal is a court. The tribunal, w ...
of the ''Skipjack'' class, it was found that the propeller produced noise below
cavitation Cavitation is a phenomenon in which the static pressure of a liquid reduces to below the liquid's vapour pressure, leading to the formation of small vapor-filled cavities in the liquid. When subjected to higher pressure, these cavities, cal ...
depth. It was determined that the source of this noise, called blade-rate, was the blades of the screw vibrating when they hit the wake of the sail and control surfaces. This produced a noise that could carry for many miles and could be used by an enemy submarine to set up a firing solution because the frequency of blade-rate was directly related to the speed of the submarine (the RPM of the screw). The solution was to either make the screw smaller so it did not hit the wakes of the sail and control surfaces, which would cavitate more easily because of its increased speed, or have a large screw that gently interacted with these areas of disturbed water. The latter solution was chosen for all subsequent American SSNs. ''Permit'' and later submarines of this class had seven-bladed skewback screws, which reduced the problem of blade-rate, but reduced the submarines' top speed to . ''Jack'' was designed with counter-rotating screws, each of which were smaller than the standard seven-bladed screw, as an alternative solution to the blade-rate problem. The class received mid-life upgrades in the late 1970s and 1980s, including the sonar suite with a retractable
towed array A towed array sonar is a system of hydrophones towed behind a submarine or a surface ship on a cable. Trailing the hydrophones behind the vessel, on a cable that can be kilometers long, keeps the array's sensors away from the ship's own noise sou ...
, Mk 117 torpedo fire control equipment, and other electronics upgrades.


Armament

The boats had their torpedo tubes moved to the middle of the hull and angled outboard. This made available the required large space in the bow for the BQQ-2 (BQQ-5 as modernized from the late 1970s) sonar sphere, a new and powerful low-frequency detection sensor. Initially armed with
Mark 37 torpedo The Mark 37 torpedo is a torpedo with electrical propulsion, developed for the US Navy after World War II. It entered service with the US Navy in the early 1950s, with over 3,300 produced. It was phased out of service key with the US Navy during t ...
es, by the late 1960s they carried the improved
Mark 48 The Mark 48 and its improved Advanced Capability (ADCAP) variant are American heavyweight submarine-launched torpedoes. They were designed to sink deep-diving nuclear-powered submarines and high-performance surface ships. History The Mark 48 w ...
and the nuclear
UUM-44 SUBROC The UUM-44 SUBROC (SUBmarine ROCket) was a type of submarine-launched rocket deployed by the United States Navy as an anti-submarine weapon. It carried a 250 kiloton thermonuclear warhead configured as a nuclear depth bomb. Development SUBRO ...
short-range anti-submarine missile, replacing up to six Mk 48s. The ''Thresher''s were the first class fitted with the Mark 113 fire control system that enabled the use of SUBROC; they were later upgraded with the Mark 117 system. In the late 1970s the
UGM-84 Harpoon The Harpoon is an all-weather, over-the-horizon, anti-ship missile manufactured by McDonnell Douglas (now Boeing Defense, Space & Security). The AGM-84E Standoff Land Attack Missile (SLAM) and later AGM-84H/K SLAM-ER (Standoff Land Attack Mi ...
anti-ship missile An anti-ship missile (AShM) is a guided missile that is designed for use against ships and large boats. Most anti-ship missiles are of the sea skimming variety, and many use a combination of inertial guidance and active radar homing. A good ...
was introduced; typically four were carried in place of Mk 48s. The maximum weapons load was 23 torpedoes/missiles or, theoretically, up to 42 Mk 57, Mk 60, or Mk 67 mines. Any mix of mines, torpedoes, and missiles could be included.''War Machines Encyclopedia'', Aerospace Publishing Ltd., Italian version printed by De Agostini, pp. 526–27


Construction

The first submarine commissioned in the class was the ill-fated , and so the class was known by her name. When ''Thresher'' was lost on 10 April 1963, the class took the name of the second ship in the class, . ''Thresher'' had numerous advanced design features and embodied the future of US Navy submarine design, and her loss was a serious blow. As a result, the SUBSAFE program was instituted to correct design flaws and introduce strict manufacturing and construction
quality control Quality control (QC) is a process by which entities review the quality of all factors involved in production. ISO 9000 defines quality control as "a part of quality management focused on fulfilling quality requirements". This approach places ...
in critical systems. The seawater and main ballast systems of future classes (''Sturgeon''-class SSNs and
SSBN A ballistic missile submarine is a submarine capable of deploying submarine-launched ballistic missiles (SLBMs) with nuclear warheads. The United States Navy's hull classification symbols for ballistic missile submarines are SSB and SSBN – ...
s) were redesigned, and some ''Thresher''s and other submarines were rebuilt to SUBSAFE standards. SUBSAFE includes specific training of SUBSAFE
quality assurance Quality assurance (QA) is the term used in both manufacturing and service industries to describe the systematic efforts taken to ensure that the product(s) delivered to customer(s) meet with the contractual and other agreed upon performance, design ...
inspectors in the engineering crew, and tracks extremely detailed information about every component of a submarine that is subject to sea pressure. Joints in any equipment carrying seawater must be
welded Welding is a fabrication process that joins materials, usually metals or thermoplastics, by using high heat to melt the parts together and allowing them to cool, causing fusion. Welding is distinct from lower temperature techniques such as braz ...
(not
brazed Brazing is a metal-joining process in which two or more metal items are joined together by melting and flowing a filler metal into the joint, with the filler metal having a lower melting point than the adjoining metal. Brazing differs from we ...
), and every hull penetration larger than a specified size can be quickly shut by a remote hydraulic mechanism. The program has been very successful, as no SUBSAFE submarines have been lost as of 2019 ( was not SUBSAFE). , , and were designed under project SCB 188M and were fitted with a larger sail, to house additional masts, and built ten feet longer than the other units of the class to include more SUBSAFE features, additional reserve buoyancy, more intelligence gathering equipment and improved accommodations. was completed with the larger sail but the standard hull. The engine room of was lengthened by to accommodate an experimental
direct-drive A direct-drive mechanism is a mechanism design where the force or torque from a prime mover is transmitted directly to the effector device (such as the drive wheels of a vehicle) without involving any intermediate couplings such as a gear train or ...
propulsion system using concentric counter-rotating propellers. Although counter-rotating propellers produced impressive gains in speed on the experimental , in ''Jack'' the results were disappointing because of the difficulty in sealing the shaft. ''Jack'' was also used to test polymer ejection that could reduce flow noises that degraded sonar performance.


Ships in class

The gaps in the hull number sequence were taken by the unique , and the , , and fleet ballistic missile submarine classes.


See also

*
List of submarines of the United States Navy This is a list of submarines of the United States Navy, listed by hull number and by name. List See also * Submarines in the United States Navy * List of current ships of the United States Navy * List of lost United States submarines * L ...
*
List of submarine classes of the United States Navy Submarines of the United States Navy are built in classes, using a single design for a number of boats. Minor variations occur as improvements are incorporated into the design, so later boats of a class may be more capable than earlier. Also, boat ...
* Ship Characteristics Board – USS ''Thresher'' loss


References

* Gardiner, Robert and Chumbley, Stephen, ''Conway's All the World's Fighting Ships 1947–1995'', London: Conway Maritime Press, 1995. . * Karam, P. Andrew and Thompson, Roger, ''Rig Ship for Ultra Quiet: Life on a nuclear attack boat at the end of the Cold War''
Google Books link
* Hutchinson, Robert, ''Jane's Submarines, War Beneath The Waves, From 1776 To The Present Day'', Harper Paperbacks, 2005. . * Polmar, Norman (2004). ''Cold War Submarines: The Design and Construction of U.S. and Soviet Submarines, 1945-2001''. Dulles: Brassey's. .


External links







at GlobalSecurity.org {{DEFAULTSORT:Permit Class Submarine Submarine classes Permit class Permit class