TGR K Class
   HOME

TheInfoList



OR:

The Tasmanian Government Railways K class was a class of
0-4-0+0-4-0 Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the is an articulated locomotive of the Garratt type. The wheel arrangement is effectively two locomotives operating back-to-back or face-to-face, with ...
Garratt A Garratt (often referred to as a Beyer Garratt) is a type of steam locomotive invented by British engineer Herbert William Garratt that is articulated into three parts. Its boiler, firebox, and cab are mounted on a centre frame or "bridge ...
articulated
steam locomotive A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material (usually coal, oil or, rarely, wood) to heat water in the locomot ...
s operated by the
Tasmanian Government Railways The Tasmanian Government Railways (TGR) was the former operator of the mainline railways in Tasmania, Australia. Formed in 1872, the railway company was managed by the Government of Tasmania, and existed until absorption into the Australian Na ...
from 1909 – the first Garratt locomotives built.


Overview

Although considered the first Garratt locomotives, they did in fact differ in two important details from Herbert Garratt's original concept. First: they are compound locomotives, with two high-pressure cylinders on the rear engine, and a pipe leading to two larger low-pressure cylinders on the front engine; second: both sets of cylinders were placed facing each other inside their engine units, rather than facing out as in all other Garratts. This was a problem on the rare warm days on the West Coast Range in Tasmania, as one pair of cylinders was under the cab, making the cab uncomfortably hot. The
North East Dundas Tramway The North East Dundas Tramway was a Narrow-gauge railway, narrow gauge tramway (industrial), tramway, that ran between Zeehan and Deep Lead (now Williamsford, Tasmania, Williamsford) on the West Coast, Tasmania, West Coast of Tasmania. Opening ...
on which they worked traversed some of the most rugged terrain in the world served by a railway at the time. It featured long stretches of 1-in-25 grades, high trestle bridges and 30-metre-radius reverse curves. After the line closed in 1929, the boiler of K1 was sold to a sawmill, and in 1947 K1 was sold to its builder Beyer, Peacock & Co, with the boiler and boiler cradle of K2 attached and repatriated back to England. Beyer, Peacock & Co closed in 1966. K1 was sold to the
Ffestiniog Railway The Ffestiniog Railway ( cy, Rheilffordd Ffestiniog) is a heritage railway based on narrow-gauge, located in Gwynedd, Wales. It is a major tourist attraction located mainly within the Snowdonia National Park. The railway is roughly long an ...
for 1500 GBP after an appeal for funds. However, it was too tall and wide for use within the restricted
loading gauge A loading gauge is a diagram or physical structure that defines the maximum height and width dimensions in railway vehicles and their loads. Their purpose is to ensure that rail vehicles can pass safely through tunnels and under bridges, and ke ...
, and after ten years of storage at Porthmadog, it was lent to the National Railway Museum (NRM), York where it was cosmetically restored.K1 The Original Garratt - Maintenance & Support
West Highland Railway Society
As the Welsh Highland Railway (WHR) rebuilding project reached fruition, K1's potential for the line was recognised and in 1995 it left the NRM. A new boiler was found to be required. Parts were restored at various locations, with K1 reassembled at Boston Lodge. After conversion to oil-firing, it steamed again in 2004 and finally received
HM Railway Inspectorate Established in 1840, His Majesty's Railway Inspectorate (HMRI) is the organisation responsible for overseeing safety on Britain's railways and tramways. It was previously a separate non-departmental public body, but from 1990 to April 2006 it ...
approval in September 2006 to haul trains. A conversion back to coal firing was completed in August 2007 together with some other work which allowed it to appear at the Superpower weekend in early September. It entered regular passenger service in October 2007. In 2014, K1's boiler certificate expired and it was withdrawn for overhaul. A full boiler shell exam is required. However, because the locomotive does not meet the operational requirements of the WHR (it cannot haul the passenger loads required) and with the WHR's workshops fully committed to other overhaul projects, in 2019 it moved to the
Statfold Barn Railway The Statfold Barn Railway is a narrow gauge railway based near Tamworth, Staffordshire and partially in Warwickshire, England. Founded by engineering entrepreneur Graham Lee and his wife Carol at their farm-based home, they originally designed wh ...
for a period of ten years. A boiler overhaul was started in January 2020 .K1 Moves to Stalford for Cosmetic Restoration and Display ''
Steam Railway This tabulation is for periodicals which do not have their own articles. Magazines ''Australian Railway'' * * Published Trade News Corporation * Feb-Mar 1988 is Vol. 2 No. 1. * Last issue about #23 in approximately Aug 1992. * Size = ~A4 ''A ...
'' issue 500 December 2019 page 20


References


Further reading

*Belibin, Bruce and McKillop, Bob - ''K1 steams again'' Light Railways, Number 193 February 2007 pp. 3–7 * * * * *


External links

{{commons category, TGR K class locomotives
Garratt locomotives
Rail Tasmania
TGR K class DrawingDrawing of TGR K class
Beyer, Peacock locomotives Compound locomotives Garratt locomotives Railway locomotives introduced in 1909 Steam locomotives of Tasmania 0-4-0+0-4-0 locomotives 2 ft gauge locomotives