Sun Yan

''Fanqie'' ( zh, t= 反切, p=fǎnqiè) is a method in traditional Chinese lexicography to indicate the pronunciation of a monosyllabic character by using two other characters, one with the same initial consonant as the desired syllable and one with the same rest of the syllable (the final).
The method was introduced in the 3rd century AD and used in dictionaries and commentaries on the classics until the early 20th century.

History

Early dictionaries such as the ''Erya'' (3rd century BC) indicated the pronunciation of a character by the ''dúruò'' (讀若, "read as") method, giving another character with the same pronunciation. The introduction of Buddhism to China around the 1st century brought Indian phonetic knowledge, which may have inspired the idea of ''fanqie''. According to the 6th-century scholar Yan Zhitui, ''fanqie'' were first used by Sun Yan (孫炎), of the state of Wei during the Three Kingdoms period (220–280 AD), in his ''Erya Yinyi'' (爾雅音義, "Sounds and Meanings of ''Erya''"). However, earlier examples have been found in the late-2nd-century works of Fu Qian and Ying Shao.

The oldest extant sources of significant bodies of ''fanqie'' are fragments of the original ''Yupian'' (544 AD) found in Japan and the ''Jingdian Shiwen'', a commentary on the classics that was written in 583 AD. The method was used throughout the ''Qieyun'', a Chinese rhyme dictionary published in 601 AD during the Sui Dynasty. When Classical Chinese poetry flowered during the Tang Dynasty, the ''Qieyun'' became the authoritative source for literary pronunciations. Several revisions and enlargements were produced, the most important of which was the ''Guangyun'' (1007–1008). Even after the more sophisticated rime table analysis was developed, ''fanqie'' continued to be used in dictionaries, including the voluminous ''Kangxi Dictionary'', published in 1716, and the ''Ciyuan'' and ''Cihai'' of the 1930s.

During the Qing dynasty, some bilingual Chinese-Manchu dictionaries had the Manchu words phonetically transcribed with Chinese characters. The book 御製增訂清文鑑 ("Imperially Published Revised and Enlarged Mirror of Qing"), in both Manchu and Chinese, used Manchu script to transcribe Chinese words and Chinese characters to transcribe Manchu words by using ''fanqie''.

Function

In the ''fanqie'' method, a character's pronunciation is represented by two other characters. The onset (initial consonant) is represented by that of the first of the two characters (上字 "upper word", as Chinese was written vertically); the final (including the medial glide, the nuclear vowel and the coda) and the tone are represented by those of the second of the two characters (下字, "lower word"). For example, in the ''Qieyun'', the character is described by the formula 德紅反. The first two characters indicate the onset and the final, respectively, and so the pronunciation of 東 is given as the onset of with the final of , with the same tone as 紅.

In the rhyme dictionaries, there was a tendency to choose pairs of characters that agree on the presence or absence of a palatal medial ''-j-'', but there was no such tendency for the rounded medial ''-w-'', which was represented solely in the final character.
There was also a strong tendency to spell words with labial initials using final characters with labial initials.

The third character ''fǎn'' "turn back" is the usual marker of a ''fanqie'' spelling in the ''Qieyun''. In later dictionaries such as the ''Guangyun'', the marker character is ''qiè'' "run together". (The commonly-cited reading "cut" seems to be modern.) The Qing scholar Gu Yanwu suggested that ''fǎn'', which also meant "overthrow", was avoided after the devastating rebellions during the middle of the Tang dynasty. The origin of both terms is obscure.
The compound word ''fǎnqiè'' first appeared during the Song dynasty.

Analysis

''Fanqie'' provide information about the sounds of earlier forms of Chinese, but its recovery is not straightforward. Several characters could be used for each initial or final, and in particular, no character was ever used to spell itself.

However, it is possible to identify the initials and the finals underlying a large and consistent collection of ''fanqie'' by using a method that was first used by the Cantonese scholar Chen Li, in his 1842 study of the ''Guangyun''.
For example, in that dictionary,
* 東 was spelled 德 + 紅,
* 德 was spelled 多 + 特, and
* 多 was spelled 德 + 河.
That implies that 東, 德 and 多 must all have had the same initial. By following such chains of equivalence, Chen was able to identify categories of equivalent initial spellers, and a similar process was possible for the finals.
Unaware of Chen's work, the Swedish linguist Bernard Karlgren repeated the analysis to identify the initials and finals in the 1910s.

Chen's method can be used to identify the categories of initials and finals, but not their sound values, for which other evidence is required.
Thus, Middle Chinese has been reconstructed by Karlgren and later scholars by comparing those categories with Sino-Xenic pronunciations and the pronunciations in modern varieties of Chinese.

Effects of sound change

The method described the pronunciations of characters in Middle Chinese, but the relationships have been obscured as the language evolved into the modern varieties over the last millennium and a half. Middle Chinese had four tones, and initial plosives and affricates could be voiced, aspirated or voiceless unaspirated. Syllables with voiced initials tended to be pronounced with a lower pitch, and by the late Tang dynasty, each of the tones had split into two registers (traditionally known as ''yīn'' 陰 and ''yáng'' 陽) conditioned by the initials. Voicing then disappeared in all dialects except the Wu group, with consonants becoming aspirated or unaspirated depending on the tone. The tones then underwent further mergers in various varieties of Chinese. Thus, the changes in both the initial and the tone were conditioned on each other, as represented by different characters in the ''fanqie'' pair.

For example, the characters of formula 東 = 德 + 紅 are pronounced ''dōng'', ''dé'' and ''hóng'' in modern Standard Chinese; thus, the tones no longer match. That is because the voiceless initial and the voiced initial condition different registers of the Middle Chinese level tone, yielding the first and the second tones of the modern language. (The pinyin letter ''d'' represents the voiceless and unaspirated stop .)

That effect sometimes led to a form of spelling pronunciation. Chao Yuen Ren cited the example of the character , which had two readings in Middle Chinese. It could be read as in the level tone, meaning "strong, powerful", which developed regularly into the modern reading ''qiáng''. However, it could be read also as in the rising tone, meaning "stubborn" or "forced". The regular development would be for the voiced initial to condition the ''yang'' register of the rising tone, becoming the fourth tone of modern Chinese and for the rising tone to condition an unaspirated initial.
Thus, ''jiàng'' would be expected, and this does occur in the sense "stubborn", but the character also has the unexpected pronunciation ''qiǎng'' for the sense "forced". Chao attributed that to the ''fanqie'' formula 强 = (level tone) + (rising tone) given in dictionaries. Here, the first character is now pronounced ''qí'' because in the level tone, the voiced initial becomes aspirated, but the second character is now pronounced ''liǎng''. That is because in the rising tone, sonorants like conditioned the ''yin'' register, which led to the modern third tone.

See also

* Transliteration of Chinese

References

Works cited

*
*
*
*
*
* Reprinted as
* (This book pointed out that use of ''fanqie'' appeared as early as Eastern Han.)
*
*
*
*
*
{{Refend

Chinese words and phrases
Middle Chinese
Traditional Chinese phonology