HOME

TheInfoList



OR:

In
rail transport Rail transport (also known as train transport) is a means of transport that transfers passengers and goods on wheeled vehicles running on rails, which are incorporated in tracks. In contrast to road transport, where the vehicles run on a p ...
, a section could refer to: a portion of a
train In rail transport, a train (from Old French , from Latin , "to pull, to draw") is a series of connected vehicles that run along a railway track and Passenger train, transport people or Rail freight transport, freight. Trains are typically pul ...
that may be operated independently and/or combined with other sections to operate as a single unit; or a portion of railway line designated for
signalling In signal processing, a signal is a function that conveys information about a phenomenon. Any quantity that can vary over space or time can be used as a signal to share messages between observers. The ''IEEE Transactions on Signal Processing'' ...
or maintenance; or an interior portion of a
sleeping car The sleeping car or sleeper (often ) is a railway passenger car (rail), passenger car that can accommodate all passengers in beds of one kind or another, for the purpose of sleeping. George Pullman was the American innovator of the sleeper car. ...
made up of two double seats during daytime that convert to two double berths during nighttime. Trains could be split into multiple sections for reasons including: an abundance of freight or passengers requiring the use of a second train to cover a route; two or more routes with a common start point but multiple destinations on separate lines. Where multiple trains are used on the same route to convey an excess of freight or passengers, the trains will be defined as "first section," "second section," "third section," etc. to differentiate the vehicles for dispatching. Although it was not always the case that the first section travelled first, this naming and travel sequence was generally followed by convention. Each section prior but not the last would display green classification signals in the form of either flags or lamps at the head end.


By country


United States

;Trains with common start points and multiple destinations * The ''
Rocky Mountain Rocket The ''Rocky Mountain Rocket'' was a streamlined passenger train of the Chicago, Rock Island and Pacific Railroad. Rock Island's train numbers 7 and 8 ran between Chicago's LaSalle Street Station and Denver's Union Station and Colorado Springs ...
'' passenger train of the
Chicago, Rock Island and Pacific Railroad The Chicago, Rock Island and Pacific Railroad (CRI&P RW, sometimes called ''Chicago, Rock Island and Pacific Railway'') was an American Class I railroad. It was also known as the Rock Island Line, or, in its final years, The Rock. At the end ...
was operated in multiple sections. The two sections were combined from Chicago to
Limon, Colorado Limon is a statutory town that is the most populous municipality in Lincoln County, Colorado, United States. The population was 1,880 at the 2010 United States Census. Limon has been called the "Hub City" of Eastern Colorado because Interst ...
, where they were split into sections and subsequently operated as two trains, one to Denver and one to Colorado Springs. The process was reversed for the eastbound direction as the two sections were combined in Limon for the trip to Chicago. The Rock Island commissioned construction of the AB6 locomotive specifically for this service. * Santa Fe's ''
Grand Canyon Limited The ''Grand Canyon Limited'' was one of the named passenger trains of the Atchison, Topeka and Santa Fe Railway. It was train Nos. 23 & 24 between Chicago, Illinois, and Los Angeles, California. History In 1901 the Santa Fe Railroad complete ...
'' was operated in multiple sections. Two sections were combined from Chicago to
Barstow, California Barstow is a city in San Bernardino County, California, in the Mojave Desert of Southern California. Located in the Inland Empire region of California, the population was 25,415 at the 2020 census. Barstow is an important crossroads for the I ...
, where they were split with one section continuing to San Francisco and the other to Los Angeles. ;Some accidents and incidents * October 10, 1888; Mud Run disaster – The seventh of eight sections of a passenger service on the
Lehigh Valley Railroad The Lehigh Valley Railroad was a railroad built in the Northeastern United States to haul anthracite coal from the Coal Region in Pennsylvania. The railroad was authorized on April 21, 1846 for freight and transportation of passengers, goods, w ...
in
Pennsylvania Pennsylvania (; ( Pennsylvania Dutch: )), officially the Commonwealth of Pennsylvania, is a state spanning the Mid-Atlantic, Northeastern, Appalachian, and Great Lakes regions of the United States. It borders Delaware to its southeast, ...
collided with the rear of the stopped sixth section, telescoping the seventh section's locomotive through the last two cars of the sixth section, killing 64 and injuring 50. * August 7, 1903 – The Great Wallace Show
circus train A circus train is a method of conveyance for circus troupes. One of the larger users of circus trains was the Ringling Bros. and Barnum & Bailey Circus (RBBX), a famous American circus formed when the Ringling Brothers Circus purchased the Ba ...
was split into two sections for its journey to Durand, Michigan. The first section arrived without incident, but the second section did not slow for the yard and rear-ended the first section, killing 26. * January 10, 1918 – The southbound '' Katy Flyer'' was operated as two sections. While the first section was stopped at the coal chute in
Granger, Texas Granger is a city in Williamson County, Texas, United States. It was incorporated in 1891. The population was 1,183 at the 2020 census. History In the late 19th century, Granger was one of the centers of the large Moravian Czech immigrant popul ...
, for refueling, the second section rear-ended it killing 3 and injuring 11 passengers.


See also

*
Dividing train A dividing train is a passenger train that separates into two trains partway along its route, so as to serve two destinations. Inversely, two trains from different origins may be coupled together mid-route to reach a common endpoint. Trains on c ...
*
Through coach In rail terminology, a through coach is a passenger car (coach) that is re-marshalled during the course of its journey. It begins the journey attached to one train, and arrives at its destination attached to another train. Through coaches save ...
*
Slip coach A slip coach, slip carriage or slip portion in Britain and Ireland, also known as a flying switch in North America, is one or more carriages designed to be uncoupled from the rear of a moving train. The detached portion continued under its own m ...


References

{{reflist Rail transport operations Trains